Space on the C drive have exhausted when I use internet
I have a laptop Compaq610 with Windows Vista Home Basic as the operating system. I have three partitoned discs namely C (28.8 GB), D (259 GB) & E (10GB). Drive C is to have Windows files, drive E is to have the HP recovery files and drive D is the drive I save all of my personal work. The problem is when I use internet space in drive C is evacuated automatically even if I save all my files were '. Free space in 'C' is only 1.39 as to date. What is the solution? I regularly use disk clean up but only a small part of 'C' is cancelled.
Hello
your C: partition is too small
http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements
Microsoft recommends 40GBs install vista on
You have temporary internet files, etc being recorded as well as windows updates
System Restore takes 15% C: space too
and don't you can't change where etc. restore points are saved
If you are installing programs on C: you can uninstall/reinstall them but when resettlement to lead must be installed on the D: drive
Another solution is to record data on D: as it will be lost in doing so - then delete D: - extend C: into the now unallocated space where D: was - and backup all your data, copy
and save your data on another partition on the same hard drive does not help if your hard drive fails
http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html
Tags: Windows
Similar Questions
-
Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.
See this:
http://KB.mozillazine.org/Problems_printing_web_pages -
I have less free space on the C drive, and I have exactly 56.998 space USED (s)... Here is the photo that explains everything...
P.SI recently installed a new Windows 7 because my PC was crushed.Adding sizes show in various properties of the folder does not show the actual space consumed.
This free utility can reveal information relevant and that is using the space
-
My C: drive is almost full, how can I move to my new hard drive F: programs to free up space on the C: drive?
Hello
You can not move installed programs
you will need to uninstall them and reinstall them on your F: drive
_____________________________________________________________________
and read this;
see if this program helps you to determine what is take up space
http://www.Jam-software.com/treesize_personal/
by default system restore will have up to 15% of the capacity of the hard disk
you would like to reduce this amount
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.vista4beginners.com/system-restore-space-used
also use disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:
Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.
System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.
also scan for malware
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
and read these information from microsoft on windows optimization
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
-
Any way to increase the amount of space on the local drive C:?
Hey guys - here's my question - I got new Mac just now with VMware Fusion preinstalled and had not paid much attention to the amount of free space on drive c until today when I finally got the time to actually need to install a few Windows programs and ran into a problem - it pops up a window telling me that it was out of disk space on the C drive. At first I thought that ' no way - has nothing here but Vista and Office ' but of course I got after verifying the capacity of 20 GB and 1 GB of free space.
My main HD on my Mac is a 300 Gig with barely 50 gigs used total - disc so I have plenty of space to use, I'm not sure why this has been set up this way to begin with. Is it all the same to expand this or is this set to the score that the guy who sold me the mac put in place (I'm basically screwed and all files on my Mac and everything what will be lost if I want to enlarge the c: one size usable?)
Hello Bbible. Please see the next thread for all your replies on increase/reduction of the size of your HARD drive. What for his evidence, you can do either without losing your data.
http://communities.VMware.com/docs/doc-7471
If you have found the following information useful please consider giving points and or the marker said.
See you soon
Kevin
-
Find unused space on the hard drive of the Satellite A40.
This space is about 7 GB, and seems to be unused.
Can I create a partion second on this space or perhaps used by special services of Windows XP Home edition?(found this space after the installation of third-party backup/restore program)
Hello
Well, if you have a free space on the HARD drive if you want, you can create a two or three partitions. New partitions can have different sizes. In this case, I propose to use the magic of Partitions. This tool is very nice and easy to use and has many useful features.
Try it.Good bye
-
I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked. How to unlock. Computer is a Dell and printer is a Lexmark.
Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:
The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:
I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked. How to unlock. Computer is a Dell and printer is a Lexmark.
What exactly is the software that you have installed?
Ken Blake, Microsoft MVP
The software is called RegWork. I had to pay for it. It is not yet enabled. It seems to be just a type of utility to clean my system scan. Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
Should I continue to carry out this activation or should I unstall it.What makes you think that Microsoft Security Essentials recommended
It? That cannot be good.You must uninstall it. Registry cleaning programs are all snake
oil. The registry cleaning is not necessary and dangerous. Leave the
Only registry and do not use any registry cleaner. Despite what a lot
people think, and try to which suppliers of software record cleaning
convince you to have used really doesn't hurt registry entries
you.The risk of a serious problem caused by a registry cleaner by mistake
delete an entry you need is much greater than any potential benefit
It can have.Read http://www.edbott.com/weblog/archives/000643.html
and http://aumha.net/viewtopic.php?t=28099
and also
http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspxLet me stress that neither me nor anyone else who warns the
use of registry cleaners never said that they always cause
problems. If they have always caused problems, they would disappear from
the market almost immediately. Many people have used a registry
cleaner and never had a problem with it.The problem with a registry cleaner is that it carries with it
the risk of a significant problem. And since there is no
benefits of using a registry cleaner, running that risk is a very bad
good deal.
Ken Blake, Microsoft MVP -
We try to upgrade Vista Home Basic on an Acer Windows 7, but does not because there is not enough space on the hard drive C. I have another drive that is empty, hard drive called D data and will not go to it. What I can do. I just spent $ 125 for this upgrade. Thank you
original title: try to upgrade to Windows 7Hello
you are posting in the wrong forums
These are some Vista Forums
You can read this information to see if your machine is compatibile Windows 7 and repost in the correct Windows 7 forum (link below)
so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine
check with them
and read this
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
_____________________________________________________________
and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all
-
After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.
# Multimedia files are hardlinked.
(141516)
-
Low warning message indicating the space on the C drive. The message can be disabled? How? should I do?
Hello
I suggest you to refer to this link and check if it helps:
http://support.Microsoft.com/kb/285107
It will be useful.
-
have I not 2 use internet explore so that my laptop will recognize the xbox360 when searching 4 TI
original title: xbox 360
have I not 2 use internet explore so that my laptop will recognize the xbox360 when searching 4 it cause I use operaAsk in the Xbox forum:
http://www.xbox360forum.com/Xbox-Forum/Forum.php -
I'm trying to move some of my files from my C: drive program to my D: drive to free up space on the C: drive. I still want to access via desktop shortcuts to open programs I want to spend. Is there an easy way to do it without uninstall or reinstall each program?
You can not do the way you want.
You will need to delete D: and then extend C: into the now unallocated space where D: is.
You can't take a piece of D: and nail it on C:; you need to remove D:
Save all data on drive D:
Follow the instructions below on how to do it:
http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html
How to remove and extend a Partition with Vista disk management
See you soon.
Mick Murphy - Microsoft partner
-
Am I missing a configuration of PLC to allow me to crop and scan several photos?
With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.
Help.
VIC
I plugged a usb cable and I was able to use the WIA import feature and
the menu of the controller,
He gave me the opportunity to select the printer and scan using the automaton
function.
When I removed the cable, it would not recognize the printer scanner in the
Wireless mode.
I tried to restart the system, no luck.
In fact, when the cable is removed, the function to automate is
"grayed out" which would explain why it cannot find the scanner.
Any ideas?
VIC Ouellette
K1CGI... QRZ?
In a message dated 12/09/2015 11:41:18 eastern standard time,
[email protected] wrote:
You talked
(https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I
problems to use the scanning feature strraigten and the cultures of the automaton. Another impression
features work within the progrram, but no connection when I use don't automate.
in Adobe Community - view [email protected]of reference for you
(https://forums.adobe.com/message/8274458?et=notification.mention#8274458)
-
Satellite C660: the system stops when I use internet or read a file
for 2 days the laptop (I have win7 Home premium) hang up when I use internet, play a game, use a program, read a document.
I'm not be able to move the mouse pointer and also pressing CTRL-ALT - ANNU system stops too.
The only way to turn off the laptop is to push the botton to power or raise electricity
What appen?What will happen? Well I would be to know this too ;)
Have you noticed a higher temperature while working on this laptop?High temperature can be one of the many reasons why the laptop does not work correctly. You can check this by using like Everest Home Edition and similar diagnostic tools
Corrupt system is the main reason why something is not working
Have you tried to clean the BONES and the registry using CCLeaner?
Try this.What about viruses? Scan you the system for malware?
Last but not least, it could be a malfunction of the equipment. RAM, HARD drive, or even motherboard could cause this
-
Re: How to remove the black lines that prints when I use my ADF?
I have an Officejet 6500 has more. I only get the double lines when using the document feeder. Fine when I use the flat bed. I thoroughly cleaned the glass, and it makes no difference. Help!
The ADF in the Officejet 6500 a scanner glass is a bit more difficult to access, but the video in the third step of the second Solution in the here document will show how to clean this area.
Maybe you are looking for
-
Firefox don't support not any page after some time.
I'm having a problem with firefox while surfing after a while. For example, during the first 15 minutes, there is no problem, after a while firefox does not load any page, I have to close and reopen again to make it work. While firefox does not load,
-
I run Windows 8 and I am very very unhappy with the interface of Skype, I am forced to use... I want the no touch screen of this software version and I never ever evr want review the touchscreen of Skype version... does anyone know how to defeat for
-
I have a question as to HOW I'm supposed to know if I got an update for you? There was mention and an investigation with regard to participation, including a party who asked if I wanted one-root the phone. I am currently waiting to receive confirmati
-
Hello Is it possible that you can be constantly updated a table or chart in labview without going through the instrument inside the loop of processing of the information itself? Basically, I want to take 10 readings of voltage and updated after each
-
executable file does not run subgroups
Hi all! I have to write a labview program that runs several screws according to what the user wants. Thus, in order to test different screws if something goes wrong, that I built a managed event structure with a controller of the tab. Each tab has a