Satellite C660: the system stops when I use internet or read a file

Similar Questions

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• bookmarks can be displayed vertically on the side like when you use internet exployer If yes how

  I would like to see my favorites on my yahoo homepage

  Hi Barbslap,

  It should work by simply pressing hotkey "Ctrl + B".

  I hope this helps, thanks!
  -Ralph

• Space on the C drive have exhausted when I use internet

  I have a laptop Compaq610 with Windows Vista Home Basic as the operating system. I have three partitoned discs namely C (28.8 GB), D (259 GB) & E (10GB). Drive C is to have Windows files, drive E is to have the HP recovery files and drive D is the drive I save all of my personal work. The problem is when I use internet space in drive C is evacuated automatically even if I save all my files were '. Free space in 'C' is only 1.39 as to date. What is the solution? I regularly use disk clean up but only a small part of 'C' is cancelled.

  Hello

  your C: partition is too small

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  Microsoft recommends 40GBs install vista on

  You have temporary internet files, etc being recorded as well as windows updates

  System Restore takes 15% C: space too

  and don't you can't change where etc. restore points are saved

  If you are installing programs on C: you can uninstall/reinstall them but when resettlement to lead must be installed on the D: drive

  Another solution is to record data on D: as it will be lost in doing so - then delete D: - extend C: into the now unallocated space where D: was - and backup all your data, copy

  and save your data on another partition on the same hard drive does not help if your hard drive fails

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• Using the HTTP Services with SSL using Internet Explorer

  Hello
  
  Basically what is happening, is that secure services are not load when I shoot to the top of the Web site when you use Internet Explorer. The site works perfectly in FireFox and Safari support however nothing via the HTTP services when using SSL. I read the Wired article http://weblogs.macromedia.com/lin/archives/flex/security/index.cfm on the use of SSL with THE de Lin Lin, however I am confused as how to implement the changes that she mentions. Basically, she mentioned a couple of the reasons why the httpServices would not be able to load data in the event of connection via SSL. I've read about the Adobe TechNote at http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fdc7b5c & SSP = rss_flashplayer_fdc7b5 c , but it was not clear either.
  
  1. How can I change the settings of the server have the correct header information?
  2. can I change something in the compiler Flex for SSL and IE?
  
  It works perfectly in FireFox and Safari, and retrieves the data without any problem. All ideas, information would be appreciated.
  

  Hello

  Basically what is happening, is that secure services are not load when I shoot to the top of the Web site when you use Internet Explorer. The site works perfectly in FireFox and Safari support however nothing via the HTTP services when using SSL. I read the Wired article http://weblogs.macromedia.com/lin/archives/flex/security/index.cfm on the use of SSL with THE de Lin Lin, however I am confused as how to implement the changes that she mentions. Basically, she mentioned a couple of the reasons why the httpServices would not be able to load data in the event of connection via SSL. I read on the Adobe TechNote http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fdc7b5c&pss=rss_flashplayer_fdc7b5 c , but it was not clear either.

  1. How can I change the settings of the server have the correct header information?
  2. can I change something in the compiler Flex for SSL and IE?

  It works perfectly in FireFox and Safari, and retrieves the data without any problem. All ideas, information would be appreciated.
  

• Windows Mail stops when I use the spellchecker

  Windows Mail sometimes/often stops when I use the spellchecker.  There is no obvious reason or a consistent trigger I can find.  I lost the email I typed.  I would prefer not to have to record every email in my drafts before I check spelling it.  How can I fix?

  Hi Holnee,

  Looks like you can have something in the background, interfere or that we would need to check the system for any problem files.

  The first thing you can do is to check your system for any possible infection such as a virus or spyware. Do a full scan of the system and see if you find infections and if yes which solves the problem that you are experiencing.

  The next thing to do would be to put yourself in a situation of clean boot to ensure that no background program interfere.

  1. Open the Start Menu
  2. Type msconfig in the Search box and press enter
  3. Click on continue in the UAC prompt
  4. On the general tab, click Selective startup.
  5. Under Selective startup, click on to clear the Load Startup items check box.
  6. Click on the Services tab, click to Select the hide all Microsoft Services check box and then click on disable all.
  7. Click OK.
  8. When you are prompted, click restart.
  9. After the computer starts, check if the problem is resolved.

  If that still does not solve the problem then let's you run the System File Checker.  It will scan all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  1. Open the Start Menu
  2. Type the command prompt in the box start the search
  3. Right click on command prompt and select run as administrator
  4. Click on continue in the UAC prompt
  5. Type the following command and press enter:
     sfc/scannow
  
  Please let us know if this solves your problem, or if you have any questions.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Window update for Vista didn't and now it stops when I use all the features.

  I did my update for Vista window and now it stops when I use all the features. I use Google Chrome and the recent update adds Bing Bar.

  Hi Izzy2222,

  ·         Did you put any power on the computer plan option?

  I recommend to open Event Viewer and find the exact description of the error. The newspaper of errors in your next post relay.

  See also: What are the information contained in the logs of the event (Event Viewer)?

  In the meantime, follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• Satellite Pro M40: computer stops when you press the SHIFT key

  Sometimes when I press the shift key it wonder if I want to shut down the computer. It also changes the internet Explorer mode in full screen. When it arrives it will be continually for centuries and then suddenly stop. Then start again. It seems not to happen at any given time. I disabled the hot key in the Toshiba utility and which comes to the top of the Tower stops when I pressed the SHIFT key, it does not give me the option.
  It's really annoys me because I can't just think what to do.

  Thank you

  Hello

  It's very strange. It is the first time I heard about this issue.
  As much as I know the Toshiba utility cannot add additional functions to shift and make this key as a stop button.
  I have gift? don't know if you have installed the 3rd party applications that can change the keyboard feature, but you should check this possibility.

  In addition can also be a defective hardware. Maybe something wrong with the keyboard controller. But of course the diagnostic test is necessary.

• Satellite L350 - 16L system restarts when you run with power cord plugged

  Satellite L350 - 16L
  32 bit windows 7 ultimate sp1

  Power cable is connected, start the start, and just at the point where desktop should appear, the system restarts.
  When the system is running on battery, everything works fine.
  When the system boots to battery, works very well, and if I plug in the power cable, the system hangs
  When the power cable is plugged in, battery charge normally.

  I tried the different power cable, same thing.

  Do you remember when this issue began to appear?
  It would be interesting to know if something special that has happened in the past
  You use the original Toshiba AC adapter that came with this laptop?

  I think that this problem occurs due to the problem of the motherboard and I imagine that there could be some electronic problem power if the AC isn't affected adapter.

  I think it would be the worst case, because it means that your motherboard must be replaced to solve this problem... motherbaord replacement is very expensive and, probably, it is not worth to fix...

  By the way: is it possible to reinstall the system, while the laptop is conencted to the power adapter? What happens if enter you BIOS mode?

• Satellite Pro L350 - when you use internet through Wi - Fi screen hangs

  Recentlyt purchased by Satellite Pro L350. When to use internet through Wi - Fi screen hangs. I can not turn off.
  Had to remove the battery to stop. Recharged the battery and released in market, OK for a while then same occurrence.

  Help!

  Try to update the Firmware on your wireless access Point.

  Also try updating the BIOS and LAN drivers wireless on the laptop.

• I recently installed PowerDesk Pro v7.0.1.3 and now, the system hangs when you right click to copy a folder, etc.

  Original title: Windows Explorer has stopped working

  My computer is running XP Home Edition Sp3 and using Norton internet security 2011. I recently installed PowerDesk Pro v7.0.1.3and now, the system crashes when you right-click to copy a folder, etc. I read on this forum of a person having a similair problem and being referred to this site offering a patch that seems to not be available:

  http://KB.avanquestusa.com/Al/12/1/article.aspx?Aid=4030&Tab=Search&BT=4&r=

  Marilyn answers Support Engineer Microsoft's answer also suggested maybe using some registry changes, which I'm not comfortable with because of my limited experience.

  Any suggestion would be greatly appreciated pedro147

  None of these suggestions to the Microsoft support technician will help you, but they will consume large amounts of your time.

  Please post a link to this Marilyn Microsoft engineer answer Support responses involving some registry maybe going to I can see that too.

  Older versions of PowerDesk Pro 7.x are known to cause explore crash, so that the sounds on the right.

  The current version of PowerDesk Pro is 8.5.

  You might be able to get the old version to behave by disabling PowerDesk one shell extensions at a time until when you right-click Explorer no longer crashes.  This will leave you with limited functionality of PowerDesk since those afflicted extensions will be disabled, but you should not have these extensions to do anything, you need to make sheets.

  I would start with the PowerDesk ZIP shell extension (I already know about this one).

  It is a version shortened and changed my notes on the use of ShellExView (since you already think sheets):

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

  For example, you could Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  Right click and disable Microsoft no suspicious extensions one at a time take a list so you can enable them again later if you wish.

  The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know which extension is the culprit, then you can start to enable them one by one until the Explorer fails again.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.  You can then start to reactivate other extensions to zero on the extensions that are causing your accident

  If the cause of the accident is a third party application or program, their may be a later version of the program available that solves the problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I access the system tray when it is disabled on the public computers?

  Hi all

  I'm trying to access the icons on the test system such as: 'Remove the device safely', but I also try to access the other icons that would show in the system tray icon on the taskbar, when I plug my USB key into a USB port. The problem is, the I use public computers are at the library, and they have the system tray and start menu disabled, so not even my flash drive icon will appear in the system tray when I plug. Is there a way to access the system tray via a software or something?
  I did a search on google for answers before posting here, but so far without success. Any help would be appreciated.

  Hello

  You will need to check with the individual computer as they have probably disabled
  All methods of access to these functions, and the status bar for security reasons. Since that
  is a major challenge for public networks, I bet they left without holes.

  I hope this helps.

• Hardware malfunction * the system stopped *.

  Had Windows reinstalled on Dell Inspiron 1318, computer Vista laptop was working fine, then during use, the blue screen appeared with this message...

  • Hardware malfunction
  • Call your provider of support material
  • NMI: channel check / IOCHK
  • The system stopped *.

  The computer does not stop! What should I do?

  http://support.Microsoft.com/kb/315223

  The article above says that it applies to XP; but the error seems to be related to the material.

  See you soon.

  Mick Murphy - Microsoft partner

• I am maing a movie with windows movie maker and you cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  ===============================
  If a music file Movie Maker crashes
  in a format that is not compatible. If you convert
  the file to the format of .wma before importing, you
  can have a better result.

  The converter below might be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your audio clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.