Spacing in a table of numbers

Similar Questions

• Problem using applescript to put data into the table of numbers with column heads

  I have extracted the data from certain Web pages and want to place the data items in a table of numbers.  I wrote the applescript to extract pairs of data into two lists, but encountered a problem when you try to put the data items in a table of numbers.

  I hope I've isolated the problem eventually reduce version of the data table and writing.

  Calendar_Month	Alvarez	Laundry	Linen	Products
  March-2014
  April 2014
  May-2014
  Totals:	0.00	0.00	0.00	0.00

  Define theLabels to {"Alvarez", "Flax", "Laundry", "Products"}

  the nominative value {11, 22, 33, 44}

  Tell application "Numbers."

  say table 1 on sheet 1 of 1

  rowIndex Set of 3

  q Set of 2

  say the line rowIndex

  colHead theLabels point q value

  the columnIndex value address column colHead

  tell the cell (columnIndex)

  value defined in point q of the nominative case

  tell the end

  tell the end

  tell the end

  tell the end

  I arbitrarily chose to line 3 of the table to demonstrate the problem.

  Each data item is associated, due to its position in the list, with a label that determines the column of the data table, where it should be placed.

  The illustrated script pitches the 2nd data element in the list in the column headed "Lin".  This seems to work ok.  But if q is set to 1 the script fails with

  get address of column "Alvarez" in line 3 of table 1 to sheet 1 of the document 1

  -> error number - 1728 column "Alvarez" in line 3 of table 1 of sheet 1 of document 1

  It fails also with q the value 3 or 4.

  I probably did something really stupid, but I can't understand this behavior.  Advice please?

  Under: Numbers v.3.6.1 Script Editor 2.7 2.4 OS X 10.5.5 Applescript

  Two questions.

  (1) the order of the text in theLabels = {"Alvarez", "Flax", "Laundry", "Products"} and differ from the order of the text in the header row. Is this correct?

  (2) you are putting the value 22 (point 2 of nominative) in cell D3, where column heading of D = "Flax", which is article 2 of the theLabels?

  Respect,

  H

• Use the table of numbers as "item select to compare.

  Greetings,

  I'm curious to know how to use an array of numbers as value in the tab select edit ideally my "case" would execute an expression "Contains(Locals.arrayofnumbers,0)."

  Basic principle:

  1 Labview VI launches with ListBox containing all tests (multiple selections enabled)

  OUTPUT is an array of I32.

  2 I32 table is attributed to Locals.arrayofnumbers

  3 Locals.arrayofnumbers is used with the element select 'compare '.

  4. each CASE has the statement... "next" Contains(Locals.arrayofnumbers,#)

  * each case would have 1 sequence to run *.

  Currently TS throws an error prompt indicating that the Select step expected number, that is the table of numbers.

  I already found a solution quick and pretty clean by instituiting just a condition prior to each sequence and captured to eliminate flow control all together. But I prefer not to use prerequisites for global flow control if possible and use controls to rate as expected.

  I have used TS help, but don't quite give me what I needed. Maybe I didn't use the correct search string. The forum here, is the same. I'm sure that the answer may be there, but maybe I'm using the wrong search string.

  Thanks in advance for any help.

  To SUM UP: User selects (via LabVIEW listbox) 1 - n tests to be run (output table I32). I32 table is used for the selection of the case by evaluating "contains (Local.arrayofnumbers, 0).

  Kind regards

  chazzzmd78

  Honestly, a Select System / box is the wrong choice for what you do.  I'd go with the prerequisite options.  It reduces the number of steps of TestStand.

  In your case you just to see whether something exists or not in a table.  Ideally, you will use the Select operations / box when you have 1 selected option of many.  I suppose you're a loop around the case select so that you can run all the tests so that your code looks something like this:

  For N (N is the number of tests they have selected)

  Select Locals.ArrayOfNumbers

  Briefcase (Locals.ArrayOfNumbers, 1).

  Run test 1

  Briefcase (Locals.ArrayOfNumbers, 2)

  Run the test 2

  Select close

  Closing loop

  If you want to use the Select option / box correctly I would like this:

  Item ForEach in Locals.ArrayOfNumbers (assign the item being Locals.i)

  Select Locals.i

  Case 1

  Run test 1

  Case 2

  Run the test 2

  Select close

  Close ForEach

  I hope that makes more sense.  If you have any questions let me know.

  Kind regards

• How to convert a table 1 d of cluster of 5 items in a table of numbers 2D? (a graph historical data)

  Hello

  in my vi, I have an array with 5 slots displaying measurement data.

  The user must be able to record all the data in the history of the card at any time. (for example the user looks at the picture and something happens, then it based on a 'save' - button)

  I know that I can read the data in the history with a property node. This isn't the problem. The problem is, how to deal with the data? The type of history data is a table 1 d of cluster of 5 elements.

  I convert these data somehow in a 2 D-table of numbers or strings, so that I can easily save it to a text file.

  How to convert a table 1 d of cluster of 5 items in a table of numbers 2D?

  I use LabVIEW 7.1

  Johannes

  Hallo Johannes,

  the photo shows the trivial way:

  

• To summarize a table of numbers

  I have a table of numbers and trying to write a function to summarize them and to set a variable that can be bound to the sum. Any suggestions guys?

  Never a good idea to variables names starting with a capital (only the name with a capital and case-sensitive Classes). Always good to initialize and to judge them and much better return the set and transmitted in the table to go.

  protected function sumArray (arr:Array): number

  {

  var arrTotal:Number = 0.0;

  for (var i: int = 0; i< arr.length;="" i++)="">

  arrTotal = arrTotal + arr [i];

  }

  Return arrTotal;

  }

  Then call it as

  currentPreTax = sumArray (itemsArray);

  Better to write generic, if possible functions, which are autonomous - depends on variables outside their statement.

• Problem creating java objects in DB tables with numbers in their name.

  I use JDeveloper 11.1.1.0.2 to create toplink pojo to database Oracle 11 g. Many of the tables have numbers in their names. When I create java objects to tables, for some reason any all numbers are abandoned on the names. If a table with the name T1_TRANS creates a java object named TTrans instead of T1Trans. The numbers are also abandoned as well domain names.
  
  I have previously built pojo for this database with JDeveloper10.1.2.X and have never experienced this problem. All the class and property names can be changed by hand, of course, but with the number of tables in this database that would be very time consuming.
  
  Is there a setting somewhere that I'm missing? Any help would be greatly appreciated. Thank you.

  Hello

  This is a bug that the numeric values in table names must be included in the generated class names. We have addressed this issue and the fix should be available in the next major release of JDev. In step 5 of Tables Wizard Java objects, you can rename the default class for each table names before the generation. This approach is little if all goes well-less bulky that rename classes after generation. However, there is no best solution for workaround. Let me know if I can provide you with additional information.

  Thank you, John

• What is the best way to get the minimum or maximum of a table of numbers value?

  Let's say I have a table of numbers: [2,3,3,4,2,2,5,6,7,2]
  
  What is the best way to find the minimum or maximum value in the table?
  
  Now, just get the maximum, I'm a loop in the table and reset a variable to the value if it is greater than the existing value:
  

  What I ended up doing was sorting table (descending to MAX) upward for MIN and then grabbing the first element of the array. Works like a charm in very few lines of code.

  Thank you.

• Analysis table of numbers and draw a graph

  Hello

  I'm quite new in the use of labview and am now facing my first isue. I have a text file of measured raw data. The tile of text looks like this:

  "Text type"; "" Flexure.
  "Final linear mass." 100.000000; "" Tex ".
  "Custom text entry 1";" »
  "Dry time"; "" Mm extension; "" Load N';' " Flexure stress MPa; ' Cycle Count '; "Total Cycle Count '; "Number of repetitions; ' Marked Data '; "PIP count";
  0; 0; 0,3586976; -0,7188803; 0; 0; 0; 0; 0; 0; 0; -0,3586976; 0; 0
  0.01; 0; 0,3380042; -0,6774079; 0; 0; 0; 0; 0; 0; 0; -0,3380042; 0; 0
  0,03;-5,66667e-005;0,3339654;-0,6693135;0;0;0;0;0;5,66667e-005;0,0002499001;-0,3339654;0;-5,66667e-005

  What I need is to pull the numbers of the first and the second column (each column separated by ';') in a table and then transpose what I can trace in a chart.

  Could someone help me or point me to the source of the study on the right?

  I tried to use the Scan of the file and reading of the worksheet screws but either did not work.

  The description specified in help is not clear enough for me.

  I thank very you much for helping me to make the first major steps with LabView.

  Martin

  Hi Martin,

  You can use the function "read a spreadsheet file. Use "Subset of the table" on the result to get what you need and it intrigues in your chart.

  Mike

• Date and time in a table of numbers - is it possible?

  Hello

  I have a table with specific measurement data of float and I save it in a spreadsheet, so that I can easily open it with Excel.

  Now, I want to win the date of the end of time as well.

  To achieve this, I changed the table of double chain and converted into all the numbers and the date and time strings, but it is not very economical.

  Can I record the date and time in a digital format, which excel can interpret as the date and time?

  I think the following:

  These numbers:

  39303

  0,66134502

  converted to the format of date and time in excel are:

  09.08.2007

  15:52:20

  How to convert date and time to numbers in LabVIEW, so that excel can convert to the date and time again?

  Johannes

  LabVIEW 7.1 (!)

  Hi Johannes,

  This link should help.

  http://www.Ozgrid.com/Excel/ExcelDateandTimes.htm

  Mike

• Spacing on a table using php or Css

  I have a mobile version of a page mobile sessions of time for movies

  What I want to do is the following

  DATE	TIME	NAME
  THUR 28th Date	X:XXam X:XXam XX:XXpm XX:XXpm	I WANT THE TITLE ON ONE LINE SPACED SO THAT IT LINES UP WITH THE TIME XXXXXXXXXXXXX XXXXX XXX XXXXX XX XXXXX XXXXX XXXXX XX XXXX
  FRI 29 Date	X:XXam X:XXam XX:XXpm XX:XXpm	XXXXXXXXXXXXX XXXXX XXX XXXXX XX XXXXX XXXXX XXXXX XX XXXX XXXXXXXXXXXXX XXXXX XXX XXXXX XX XXXXX XXXXX XXXXX XX XXXX

  Here's what the site looks like currently (SESSION TIMES)

  

  wi1dtree wrote:

  Hey osgood

  I don't mind if columns overlap the width of the screen (at least for now), as long as the text to be aligned with the time of session I'm happy

  Davids on the case BUT 'auto' will always lines running on phones, resulting in a confused mess. If you don't mind the user to scroll right and then set a width of wide table (enough to accommodate the longest line of text in column 3):

  document.getElementById('days').setAttribute ("align", "Center");

  document.getElementById('days').setAttribute ('width', ' 500');

  document.getElementById('page').style.width = 'auto';

  Still not 100% sure if the information is generated dynamically not sure how long this line will be unless you limit the number of characters that can be entered.

  Its a "band-aid" solution

• Line and spacing of the table

  I do not ask questions on the forums because the answers should be obvious and intuitive (and I've been through the tutorials), but I have trouble finding something intuitive about Dreamweaver and Flash, and aid is useless as usual.
  
  I use Dreamweaver 8 Design view and trying to get rid of the spacing around objects that have been inserted in the outside tables or table cells. For example, I have a few buttons Flash that I inserted in a table column, one in each cell, and I put cellpad, cellspace, and border to zero so that there is no visible space between buttons in design mode. When I look at the representation of the EI of the page by pressing F12, spaces appear as if by magic such as my buttons are miles away.
  
  If I place my buttons outside the table one under the other, looks like it's double spaced which I cannot find how to remove and I have the same end result - miles from the space between the buttons.
  
  In general, the configuration of table cell seems to have a mind of your own and I thought that I had under control suddenly springs apart with borders of row and column line in all directions, never to be separated. It's driving me crazy, and I would be so grateful for a patient soul to put me on the right track. I don't want to design my pages according to the wishes of the table! No doubt that I could guddle with html code, but I'm on a schedule tight and don't have a few weeks to devote to this subject.
  
  Thank you very much.

  Keys Flash?

  Slowly, I turned--so much worse, it was a return back 40 years...

  Anyway,.

  If you want to use Flash for navigation, consider this-

  1. some people not having Flash installed - what are doing?
  2. the motors don't parse Flash links - your site will not be spidered
  3. the display of the devices and accessories functional don't parse links Flash - which users will be
  do?
  4 DW cannot maintain links within a Flash movie, so if you move or rename
  a file linked, will break your navigation - what will do you?

  It is generally a bad idea for these reasons...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "John-HB" wrote in message
  News:fn8ob2$IB4$1@forums. Macromedia.com...
  > I do not ask questions on the forums because the answers should be
  > obvious and intuitive (and I've been through the tutorials), but I
  > fight
  > to find something intuitive about Dreamweaver and Flash and assistance is
  > useless
  > as usual.
  >
  > I'm using Dreamweaver 8 design and trying to get rid of the spacing
  > around objects that have been inserted in the outside tables or table cells.
  > For
  > example, I have a few Flash buttons that I inserted into a table
  > column,.
  > one in each cell, and I put cellpad, cellspace and border to zero then
  > who
  > there is no visible space between buttons in design mode. When I look at
  > to
  > representation IE page by pressing F12, spaces appear as if by magic
  > such
  > my buttons are miles away.
  >
  > If I place my buttons outside the table one under the other, it looks like
  > there are double spaced which I cannot find how to remove, and I
  > the
  > same result - miles from the space between the buttons.
  >
  > In general, the configuration of table cell seems to have a mind of its own
  > and
  > I thought I had it under control suddenly comes out with rank and
  > column
  > border line in all directions, never to be separated. There
  > makes me nuts and I would be so grateful for a patient soul to me
  > on the
  > track. I don't want to design my pages according to the
  > holds
  > the table! No doubt I could guddle with html code, but I'm on a tight
  > plan and only have a few weeks to devote to this subject.
  >
  > Thank you very much.
  >

• Using table of numbers

  Hello

  If I'm in number and I'm trying to change my name of the Table to include a brief description under the title / name, love; "Included in this list, you get... registration" How should I do this?

  Hi, PEF,.

  Click the title once to select the area that includes it.

  Hove, the mouse pointer on the bottom edge of the blue rectangle to the left. The pointer turns into a horizontal line crossed vertically by a double arrow head. Click and drag down to expand the box.

  This will allow a multi line table name. Forced a new line, use a newline (shift + return).

  Kind regards

  Barry

• Table of numbers Wave

  Hello community,

  In the App Store, I see this picture:

  

  But when I opened numbers it shows me this:

  

  I don't have this corrugated sheet shown in the first image.

  There is no update available.

  My application of numbers has version 2.6.2.

  I already tried to delete the app and redodownload it, but that has not worked.

  Is there something I missed?

  Please let me know if you know the solution.

  Thanks in advance.

  ~ Jonas

  Hello, Jonas,.

  I do not understand the question.  In the first picture that you posted is only an example sheet spread as well as the 'available options '.

  When you open numbers you start with a blank worksheet, but retain the same options "Diagramopties".

  https://www.Apple.com/NL/iOS/numbers/

  https://www.Apple.com/NL/productivity-apps/whats-new/numbers/

• new table row numbering

  Hello

  I have a table with 4 columns

  Seq_current_row seq_next_row A B

  123456 123457 2 2

  123457 123458 3 3

  123458 123459 2 2

  123459 123460 2 2

  123460 123461 4 7

  123461 123462 2 2

  123462 123463 1 2

  I would like to get a table with an additional column (C), which contains

  a sequence number incremented only if the value of the column is different from B

  A             B             C

  2             2             1

  3             3             1

  2             2             1

  2             2             1

  4             7             2             (A=! (B) = > valore della riga previous + 1 C

  2             2             2

  1             2             3             (A=! (B) = > valore della riga previous + 1 C

  RDBMS-> Oracle 11.2.2

  OS-> Linux

  Thanks in advance

  lukx

  How about this

  WITH xxx AS
          (SELECT 123456 Seq_current_row, 2 A, 2 B FROM DUAL
           UNION ALL
           SELECT 123457, 3, 3 FROM DUAL
           UNION ALL
           SELECT 123458, 2, 2 FROM DUAL
           UNION ALL
           SELECT 123459, 2, 2 FROM DUAL
           UNION ALL
           SELECT 123460, 4, 7 FROM DUAL
           UNION ALL
           SELECT 123461, 2, 2 FROM DUAL
           UNION ALL
           SELECT 123462, 1, 2 FROM DUAL)
  SELECT   A,
           B,
           (SUM(CASE WHEN A != B THEN 1 ELSE 0 END) OVER (ORDER BY Seq_current_row)) +1 C
  FROM     xxx
  ORDER BY Seq_current_row
  

• Table auto-numbering rows

  In bound form, I try to have model numbers increase of 5 with fixed line in 10. The first line works fine (15), but the following line displays 16 instead of 20. Any help is appreciated.

  https://Acrobat.com/#d=qqeTcs45UOSYHDSkvZX4ng

  Hello

  to increase the number of 5, you need to change your script in:

  this.rawValue = Row1.ModelStart.rawValue + ((this.parent.index + 1)  * 5);