Similar Questions

• Use the table of numbers as "item select to compare.

  Greetings,

  I'm curious to know how to use an array of numbers as value in the tab select edit ideally my "case" would execute an expression "Contains(Locals.arrayofnumbers,0)."

  Basic principle:

  1 Labview VI launches with ListBox containing all tests (multiple selections enabled)

  OUTPUT is an array of I32.

  2 I32 table is attributed to Locals.arrayofnumbers

  3 Locals.arrayofnumbers is used with the element select 'compare '.

  4. each CASE has the statement... "next" Contains(Locals.arrayofnumbers,#)

  * each case would have 1 sequence to run *.

  Currently TS throws an error prompt indicating that the Select step expected number, that is the table of numbers.

  I already found a solution quick and pretty clean by instituiting just a condition prior to each sequence and captured to eliminate flow control all together. But I prefer not to use prerequisites for global flow control if possible and use controls to rate as expected.

  I have used TS help, but don't quite give me what I needed. Maybe I didn't use the correct search string. The forum here, is the same. I'm sure that the answer may be there, but maybe I'm using the wrong search string.

  Thanks in advance for any help.

  To SUM UP: User selects (via LabVIEW listbox) 1 - n tests to be run (output table I32). I32 table is used for the selection of the case by evaluating "contains (Local.arrayofnumbers, 0).

  Kind regards

  chazzzmd78

  Honestly, a Select System / box is the wrong choice for what you do.  I'd go with the prerequisite options.  It reduces the number of steps of TestStand.

  In your case you just to see whether something exists or not in a table.  Ideally, you will use the Select operations / box when you have 1 selected option of many.  I suppose you're a loop around the case select so that you can run all the tests so that your code looks something like this:

  For N (N is the number of tests they have selected)

  Select Locals.ArrayOfNumbers

  Briefcase (Locals.ArrayOfNumbers, 1).

  Run test 1

  Briefcase (Locals.ArrayOfNumbers, 2)

  Run the test 2

  Select close

  Closing loop

  If you want to use the Select option / box correctly I would like this:

  Item ForEach in Locals.ArrayOfNumbers (assign the item being Locals.i)

  Select Locals.i

  Case 1

  Run test 1

  Case 2

  Run the test 2

  Select close

  Close ForEach

  I hope that makes more sense.  If you have any questions let me know.

  Kind regards

• Problem using applescript to put data into the table of numbers with column heads

  I have extracted the data from certain Web pages and want to place the data items in a table of numbers.  I wrote the applescript to extract pairs of data into two lists, but encountered a problem when you try to put the data items in a table of numbers.

  I hope I've isolated the problem eventually reduce version of the data table and writing.

  Calendar_Month	Alvarez	Laundry	Linen	Products
  March-2014
  April 2014
  May-2014
  Totals:	0.00	0.00	0.00	0.00

  Define theLabels to {"Alvarez", "Flax", "Laundry", "Products"}

  the nominative value {11, 22, 33, 44}

  Tell application "Numbers."

  say table 1 on sheet 1 of 1

  rowIndex Set of 3

  q Set of 2

  say the line rowIndex

  colHead theLabels point q value

  the columnIndex value address column colHead

  tell the cell (columnIndex)

  value defined in point q of the nominative case

  tell the end

  tell the end

  tell the end

  tell the end

  I arbitrarily chose to line 3 of the table to demonstrate the problem.

  Each data item is associated, due to its position in the list, with a label that determines the column of the data table, where it should be placed.

  The illustrated script pitches the 2nd data element in the list in the column headed "Lin".  This seems to work ok.  But if q is set to 1 the script fails with

  get address of column "Alvarez" in line 3 of table 1 to sheet 1 of the document 1

  -> error number - 1728 column "Alvarez" in line 3 of table 1 of sheet 1 of document 1

  It fails also with q the value 3 or 4.

  I probably did something really stupid, but I can't understand this behavior.  Advice please?

  Under: Numbers v.3.6.1 Script Editor 2.7 2.4 OS X 10.5.5 Applescript

  Two questions.

  (1) the order of the text in theLabels = {"Alvarez", "Flax", "Laundry", "Products"} and differ from the order of the text in the header row. Is this correct?

  (2) you are putting the value 22 (point 2 of nominative) in cell D3, where column heading of D = "Flax", which is article 2 of the theLabels?

  Respect,

  H

• How to convert a table 1 d of cluster of 5 items in a table of numbers 2D? (a graph historical data)

  Hello

  in my vi, I have an array with 5 slots displaying measurement data.

  The user must be able to record all the data in the history of the card at any time. (for example the user looks at the picture and something happens, then it based on a 'save' - button)

  I know that I can read the data in the history with a property node. This isn't the problem. The problem is, how to deal with the data? The type of history data is a table 1 d of cluster of 5 elements.

  I convert these data somehow in a 2 D-table of numbers or strings, so that I can easily save it to a text file.

  How to convert a table 1 d of cluster of 5 items in a table of numbers 2D?

  I use LabVIEW 7.1

  Johannes

  Hallo Johannes,

  the photo shows the trivial way:

  

• Problem creating java objects in DB tables with numbers in their name.

  I use JDeveloper 11.1.1.0.2 to create toplink pojo to database Oracle 11 g. Many of the tables have numbers in their names. When I create java objects to tables, for some reason any all numbers are abandoned on the names. If a table with the name T1_TRANS creates a java object named TTrans instead of T1Trans. The numbers are also abandoned as well domain names.
  
  I have previously built pojo for this database with JDeveloper10.1.2.X and have never experienced this problem. All the class and property names can be changed by hand, of course, but with the number of tables in this database that would be very time consuming.
  
  Is there a setting somewhere that I'm missing? Any help would be greatly appreciated. Thank you.

  Hello

  This is a bug that the numeric values in table names must be included in the generated class names. We have addressed this issue and the fix should be available in the next major release of JDev. In step 5 of Tables Wizard Java objects, you can rename the default class for each table names before the generation. This approach is little if all goes well-less bulky that rename classes after generation. However, there is no best solution for workaround. Let me know if I can provide you with additional information.

  Thank you, John

• I use 3.6 numbers, how do I me negative totals displayed in red?

  I use 3.6 numbers, how do I me negative totals displayed in red?

  Select the cells that you want to apply to conditional formatting, and then open cell formatter:

  

  Click the button of "conditional formatting":

  

  Now click on the button 'add rule... '. »

  Now select the option ' inferior to ' under (my screenshot is less than or equal)

  

  now use 0 (zero) as the inferior to the value to identify negative numbers

  

  Now click on the "Done" button (to the right of 'add rule... »

  

• They gave me the CD "Adobe Photoshop element 10' how to install using the serial numbers?

  They gave me the CD "Adobe Photoshop element 10' how to install using the serial numbers?

  Normally, you would place the CD in the CD player and it would be autoplay and start the installation process.  If it does not start automatically, then look at the contents of the disk file by using any file manager software, you have for your system and see if you can find the installation/setup file.

• Spacing using tables

  Hi all, I am designing a 1 page template and goes well but a bit with a problem. I am using tables and trying to put an image directly into a topic. It looks perfect in Design view, but when I go to live mode view there is a little gap/spacing. I need directly under the heading. I'll also put another image directly under the first image.

  < / tbody >

  < /table >

  < table width = "805" border = "0" align = "center" cellpadding = "0" cellspacing = "0" >

  < tbody >

  < b >

  < td width = "15" bgcolor = "#FBF5F6" > < table >

  "< td width ="775"bgcolor ="#FBF5F6"> < shipping h1 > < img src="Our_template/images/blue-bar.jpg "width ="775"height ="10"alt =" "/ > < / h1 > < table >

  < td width = "15" bgcolor = "#FBF5F6" > < table >

  < /tr >

  < b >

  < td bgcolor = "#FBF5F6" > < table >

  < td bgcolor = "#FBF5F6" > < table >

  < td bgcolor = "#FBF5F6" > < table >

  < /tr >

  < b >

  < td bgcolor = "#FBF5F6" > < table >

  < td bgcolor = "#FBF5F6" > < table >

  < td bgcolor = "#FBF5F6" > < table >

  < /tr >

  < b >

  < td bgcolor = "#FBF5F6" > < table >

  < td bgcolor = "#FBF5F6" > < table >

  < td bgcolor = "#FBF5F6" > < table >

  < /tr >

  < / tbody >

  < /table >

  < / body >

  < / html >

  Rather than using the sledgehammer that Ben and mages have recommended why not use a scalpel?

  Try to change this-

  Expedition to the France

  on this subject.

  Expedition to the France

  

• Download software using the serial numbers of the discs?

  I have Adobe first items 10 and Adobe Photoshop Elements 10. I bought the discs for my birthday in 2012, but before I had the chance to install on my laptop, it crashed and died, so I've never used their. I have now bought a macbook pro and I wanted to install the package of Photoshop, but I don't have a disk drive. Is there a a way to download the software using the serial numbers I have? Thanks in advance for any help.

  Hi Littleturnip,

  Please click on the link below to download Photoshop elements and first 10 elements.

  l http://prodesigntools.com/Photoshop-Elements-10-Direct-Download-Links-PSE-Premiere-pre.htm

  Please be sure to complete the section very important before you click on the download link.

  Thank you

• To summarize a table of numbers

  I have a table of numbers and trying to write a function to summarize them and to set a variable that can be bound to the sum. Any suggestions guys?

  Never a good idea to variables names starting with a capital (only the name with a capital and case-sensitive Classes). Always good to initialize and to judge them and much better return the set and transmitted in the table to go.

  protected function sumArray (arr:Array): number

  {

  var arrTotal:Number = 0.0;

  for (var i: int = 0; i< arr.length;="" i++)="">

  arrTotal = arrTotal + arr [i];

  }

  Return arrTotal;

  }

  Then call it as

  currentPreTax = sumArray (itemsArray);

  Better to write generic, if possible functions, which are autonomous - depends on variables outside their statement.

• Difference between USR and that uses tables from UPA_USR

  Hello
  
  I just want to know something about USR and uses tables of UPA_USR. It seems that these two table stores the same data. What is the purpose od UPA_USR table?
  
  Thank you
  
  MK
  
  Published by: user601746 on November 27, 2009 02:20

  Hi MK.

  UPA stands for verification of the user profile. All UPA * tables store audit data associated with the user rights, the group memberships. UPA_USR is one that stored audit of user profile data. It's the parent table, and he has a child table called UPA_FIELDS. For each user profile update there will be a single line in UPA_USR and for each field has changed there will be an entry in table UPA_FIELDS for the UPA_USR_KEY in the UPA_USR table. Also at any time there is a line in the table UPA_USR with UPA_USR_EFF_TO_DATE with a NULL value, indicating that it represents the current user profile.

  UPA is the table that stores the snapshot of the data for the user that includes the user profile, resource, and group memberships. It also features a column called DELTA, which is indeed a delta of changes that happened.

  Concerning
  YMI

• What is the best way to get the minimum or maximum of a table of numbers value?

  Let's say I have a table of numbers: [2,3,3,4,2,2,5,6,7,2]
  
  What is the best way to find the minimum or maximum value in the table?
  
  Now, just get the maximum, I'm a loop in the table and reset a variable to the value if it is greater than the existing value:
  

  What I ended up doing was sorting table (descending to MAX) upward for MIN and then grabbing the first element of the array. Works like a charm in very few lines of code.

  Thank you.

• Sequence of output using tables

  Hello

  How can I use a table to provide an entry for a sequence of motor input binary?  I tried to do, but the numbers that I put in the table are not the same ones that come out.  Here is an example of what I tried.  After the release of the survey, they both each exit 16.  Any help would be appreciated.

  

  
  

• Analysis table of numbers and draw a graph

  Hello

  I'm quite new in the use of labview and am now facing my first isue. I have a text file of measured raw data. The tile of text looks like this:

  "Text type"; "" Flexure.
  "Final linear mass." 100.000000; "" Tex ".
  "Custom text entry 1";" »
  "Dry time"; "" Mm extension; "" Load N';' " Flexure stress MPa; ' Cycle Count '; "Total Cycle Count '; "Number of repetitions; ' Marked Data '; "PIP count";
  0; 0; 0,3586976; -0,7188803; 0; 0; 0; 0; 0; 0; 0; -0,3586976; 0; 0
  0.01; 0; 0,3380042; -0,6774079; 0; 0; 0; 0; 0; 0; 0; -0,3380042; 0; 0
  0,03;-5,66667e-005;0,3339654;-0,6693135;0;0;0;0;0;5,66667e-005;0,0002499001;-0,3339654;0;-5,66667e-005

  What I need is to pull the numbers of the first and the second column (each column separated by ';') in a table and then transpose what I can trace in a chart.

  Could someone help me or point me to the source of the study on the right?

  I tried to use the Scan of the file and reading of the worksheet screws but either did not work.

  The description specified in help is not clear enough for me.

  I thank very you much for helping me to make the first major steps with LabView.

  Martin

  Hi Martin,

  You can use the function "read a spreadsheet file. Use "Subset of the table" on the result to get what you need and it intrigues in your chart.

  Mike

• How to use table 2 to draw an XY graph

  Hello ~

  I use for loop to teststand2014 to get 2 arraies with the same indicator loop as an attachment (Vi_array = input voltage, output power = Po_array).

  How can I build a XY Chart with these 2 arraies, Vi_array x and Po_array as Y?

  Thank you!

  You can create a table to 2 dimensions on the 2 tables, you mentioned and use the attributess of 'DataLayout' and 'DataOrientation' for the new table that you have generated. Please check attached sequence file created using TestStand 2010 version of how it can be done. I tested the graphics in XML reports.