Speaking of eBay, not well known in the Microsoft Sites

Similar Questions

• "isass.exe system error indicates an encountered or specified revision number is not one known by the service." System does not boot.

  My roommate has downloaded a manual from LG Electronics cell phone in format .pdf (Adobe). The download is complete on Firefox. It double click on the download finished in the 'Download', its pc box became very slow and finally frozen. It is running Windows XP Media since 2004 / 2005.
  When it tried to reboot, the following message appeared...

  "... isass.exe system error indicates an encountered or specified revision number is not one known by the service." Continues it's maybe a more recent revision, then the service is aware of... »

  Then will continually attempt to restart. by a failure. Note the sequence of the events above are as accurate as the harshness.

  Does this mean the registry is damaged?

  Ran Iolo System Mechanic and has been able to run the tests in two (2). One of the physical drive and the other to the integrity of the partition. Nothing helps. A ran Norton recovery and found no errors. Performed a chkdsk /r and no mistake. Ran a chkdsk/p and found errors, but was not fixed. Any suggestions about where to start?

  I would like to thank all those who helped in my installation of Windows 8 Preview of consumer. He didn't find any problems of incompatibility with Norton a few months back and HP support said that the hard drive has been ruined, and I had to buy one of them after receiving the disks to install Win 7 again. Instead, I have used Drive Scrubber from Iolo System Mechanic and installed Win 7 perfectly. I'm now back with Windows 8. ALL of you are awseome!

  Donnie

  Hello

  Try to start in last know good confriguration pressing f8

  http://support.Microsoft.com/kb/307852

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Click right does not work properly in the Microsoft Sidewinder X 8 mouse

  Original title: microsoft sidewinder x 8

  Hi, I had a sidewinder x 8 micrsoft. I love rly. but since yesterday I have a problem strange rly. If I click on the right button of the mouse the mouse starts clicking on itself. Click, click, click, click. then I click right button again and it stops. It's rly boring. I went on a normal USB mouse and it works if this isn't a problem with win 7.

  yesterday, I've updated like everything.

  NVIDIA, win7, chipset intel, new mouse and keyboard software microsoft, update virusprogram and scan, firewall updated.

  the first update was the new nvidia update. 1 hour later the problem, after that I've updated everything.

  Hi PatriceA,

  Thank you for joining Microsoft Community where you will find all the necessary information on the windows!

  Click right does not work in Microsoft Sidewinder X 8.

  Check the mouse in another computer to make sure that this is the problem with the device.

  If the problem occurs with other computers as well, then I suggest allows you to obtain assistance at the Microsoft site for technical support for hardware problems.

  See the site:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  You can also consult the site:

  http://www.Microsoft.com/hardware/en-us?WT.mc_id=hwvan

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• I have a XP product key registered in my name, but do not have the disc. Re download XP on the microsoft site?

  Windows XP download from the web

  I have a XP product key registered in my name, but do not have the disc. Re download XP on the microsoft site? Then, I want to install XP on my mac via Fusion 4

  Hello

  Unfortunately, you can not install the Windows XP operating system on your computer without a disk.

  Reference: How to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

  Hope this information is useful.

• Can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.

  I want to use a USB device to connect to the Internet, as my ethernet card is US I can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.  How to do this please?

  USB to the Internet connection.

  Hello

  It seems that your dongle is not installed properly. try to uninstall and reinstall the software dongle...

• My downloads keep getting interrupted even of the Microsoft site when you try to download Windows 7 upgrade advisor.

  My downloads keep getting interrupted even of the Microsoft site when you try to download windows 7 upgrade advisor.

  Am running vista with IE9 on laptop Fujitsu Siemens Esprimo Mobile

  Any suggestions please?

  Hello Rogerpipe

  Try to disable your temporary security software and try to download the tool Upgrade Advisor. If this does not work then put the system in a clean boot and see if the problem still occurs.
  Steps to perform a clean boot.
  http://support.Microsoft.com/kb/331796

• Wireless clients do not well known default trust certification authorities?

  I use for wireless PEAP-MSCHAPv2 authentication.  The radius server is a Windows 2008 network POLICY server.  The customers consist of a bunch of laptops (especially on Windows).  Not all of these laptops are members of Active Directory.  Then, pushing any kind of policy to all customers is not feasible (ie.) using a public key private and AD infrastructure to push the server cert and Setup wireless for all members of the domain.  So we decided to use a public key public infrastructure and got a certificate for our radius by a known CA server.  So far so good.

  When customers go to connect, they still get a nasty WARNING saying:

  -STARTUP-

  The credentials provided by the server could not be validated. We recommend that you break the connection and contact your administrator with the information provided in the details. You still can not connect, but doing so exposes you to risks of a possible unauthorized server security.
  Details
  RADIUS server: $radius
  Root CA: $ca
  The '$radius' server provided a valid certificate issued by "$ca", but "$ca" is not configured as an anchor of confidence valid for this profile. In addition, the '$radius' server is not configured as valid a NPS server to connect to this profile.
  -STOP-
  (I replaced the name of the actual radius with $radius server and the CA with $ca).
  Do a little digging, it seems that it is just the expected behavior of the Windows wireless client?  What is the point to get a cert signed by a well-known certification authority, if the customer is still going to get a warning nasty like that?
  Web browsers certainly do not behave like that.  The only difference between a web browser and the wireless client is a browser, you're still going after a URL (IE, you can match what the browser wants to connect to compared to what CN on the server cert is back with) while on the wireless client, you usually won't know the radius server you want to authenticate.  But, in both cases, the server cert is signed by a CA that is known.
  I found a good post that talks about, but no solution:
  http://social.technet.Microsoft.com/forums/en/winserverNIS/thread/26886f09-E424-48da-9ECC-cf7efd9dccc0
  Well, I guess that one solution is to manually configure the client for the certificates issued by the CA of confidence and/or configure my radius server in the connection profile.  But that requires the configuration of each client.  And there is no way that we can use AD to push a policy/cert to all customers.
  So my questions are:
  -is that really the expected behavior?
  -so trust generally the default case browsers whose certificates are stored on the operating system by default, but not wireless adapters?

  Hello

  I'm not an answer full but just putting my 2 cents.

  This problem is related with the begging of Windows wireless. Absolutely not your wireless adapter.

  CSSC or Intel ProSet behave differently. (So if you have cards intel, you can check this option).

  But I confess that I've never tried the authentication of the well-known certificate with a public cert of a certification authority

  Nicolas

  ===

  Remember responses of the rate that you find useful

• Payment Wizzard does not well placed on the Alpha unit

  Hello

  I created a digital product on a product that is in draft mode.

  I followed the instructions to integrate payment Service to

  https://developer.BlackBerry.com/Cascades/documentation/device_platform/paymentservice/selling.html

  and then I tried test the application on my Alpha device.

  The purchase feature is triggered by using the following code:

  PaymentService:getInstance() .requestPurchase (sku, this, SLOT (purchaseResponse (bb:latform:urchaseResponseInfo)));

  The problem on is that the popup wizzard payment provided by the payment API is not well positioned. It is positioned on the top of the screen and half the wizzard frame is hidden (I think the hidden part contains the TextFields to the credentials of the user.

  Anyone with the same problem?

  Hello

  It is a known issue, it should be resolved in the next version of OS later this month.

• Tips why do not fully expand on the Airbnb site?

  I have a list on the Airbnb site. There are several categories that I have to fill out to describe my property. On the right side there is "helpful advice" (my quotes) that expand when I hold my cursor on one of the categories I'm filling. Indicators do not fully develop using Firefox 39.0. Only partially, so that I can not read the entire message. Airbnb told me to try Google Chrome. I did, and the tips extended all the way. I like Firefox. I deleted the cache, and I reinstalled Firefox. Can you please help?

  Who did. Scrolls a little. Thank you.

• Can not see address of the Web site, FF29.0

  I tried to customize my toolbar when I noticed that I had managed to remove details of the address of the Web site, I can see it is no longer. What do I need to reinstall?

  It is normally not possible to remove the bar of address exactly because of this kind of situation. It was only possible to remove it because you have the add-on installed restaurateur theme Classic.

  1. Right-click on a zone empty of the tab bar and select Customize.
  2. Click the defaults button.

• Cannot access osha.gov and get message as not to go on the web site

  Original title: I can't go to site web osha.gov.

  Whenever I'm trying to go to the website of osha.gov the the screen comes to expiration and said he can't go to the web site.

  All I can do to stop this and log on to this site?

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot access osha.gov website and get the message that can not go to the web site.

   

  1. what browser do you use?

  2 did you do changes on the computer before the show?

  3 - is the full error message?

  4. the question limited to only this site or does it occur with all sites?

   

  If you use Internet Explorer, then changes to your Internet Explorer options might be preventing you to view certain websites. To check, I suggest you to refer to the procedure described in the site:

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897#gM1

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• VHD for evaluation of Windows Server 2008 R2 not accepting not a password on the Microsoft Web site

  Hello

  I recently downloaded and installed Windows Server 2008 R2 evaluation VHD on my Hyper-V using the link below.

  Title: Windows Server 2008 R2 Evaluation VHD for Hyper-V Images (180 days)

   

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16572

  However, every time I get the username and password as "Admin" & Pass@word1 mentioned in step 12, in accordance with the instructions, that I get the error message below.

  "The user name or password is incorrect"

  My data from the computer

  Operating system: Windows 8 Pro

  The use of Hyper-V

  Can someone help me?

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

  I hope that helps!

• OfficeJet Pro 8600: Uninstalled the printer driver and now can not download it from the Web site!

  The error message "printer is off-line" showed a day all of a sudden

  I tried to download the driver of scanning and printing doctor as suggested help forum, never downloaded.

  The download (or Install) window presented with percentage bar.

  but the percentage remains at 0% for 10 minutes.

  I thought that something was wrong with the Scan Doctor

  I decided to take the alternative; uninstall the current printer driver in my computer (computer laptop HP 'Pavilion', Windows8).

  I uninstalled it then tried to download the same driver on the HP site.

  It is same as the pilot of scanning and printing doctor;

  same window, "0% download" forever.

  Now, I'm totally at a loss. Have what wrong I done?  How can I make my printer work again or how do I know what is the problem?

  The driver is big enough, I would say save to disk, and then run the installation program.  You could do a right click on the link here, select "Save as", then download the file.  Depending on your internet speed, it make take some time downloading.  If it doesn't for you please specify exactly what is happening when you try to download the file, and any error messages see you.

• Download on the Microsoft site for Windows 7 installation disc.

  As a first step please check the product key. I typed in the figure of 25 key product exactly as described on the Microsoft Certificate, attached to my office when I bought it new. The o/s was preinstalled by the manufacturer Fujitsu-Siemens.

  Microsoft will not check my product key stating "it is not supported or my version is wrong. It's ridiculous, my windows is already active and running for many years in Vista with a certified product ID. In addition I received regular updates of Microsoft windows.

  So, how can I fix this nonsense to complete the installation disc?

  Unless you have already tested the compatibility of your computer with Windows 7: -.

  Windows 7 Upgrade Advisor - download [This can run on Windows XP, so it must be able to run on Vista]

  Windows 8 Upgrade Wizard - download [This can run on Windows XP, so it must be able to run on Vista]

  In addition to running the Windows 7 Upgrade Advisor, you may want to run an equivalent for Windows 10.  Unfortunately, you will have to use a substitute because Windows 10 pre-staged at level [GWX] cannot run on XP so I guess it cannot work on Vista.  So, to launch the wizard to upgrade Windows 8 instead which doesn't work on Vista.  Windows 10 system requirements and Windows 8 system requirements are pretty much the same if the results will be useful.  The first versions of the system requirements of Windows 10 has also stated that the processor (CPU) must support SSE2, NX, EAP extensions, but I have never established if my CPU reaches this spec [I just know that it works fine] and I have absolutely no idea if this part of the obligation has become irrelevant or is simply omitted for brevity.

  It is worth to run the Upgrade Advisor, even if you have already decided to go and install the new OS.  At the very least they would warn you of the hardware components you need to pay attention to.  Later, you can get better drivers installing the OS gives you - where to find the hardware drivers.

  I realize that you do backups of all of your own files, files of installation of any applications that you downloaded and product keys for all your applications.

  I realize that you will also do an image of the system so that you can go back to square one if everything goes wrong.  You must also make sure that you have both made & tested the hot spare / boot disk required by your utility Imaging System.  Macrium Reflect is an imaging Center free I've seen many people recommend.

  If you have a factory restore utility then you might find that your computer manufacturer has also provided a way to backup who until USB so that you can run the procedure to boot from USB, although the attempt to upgrade preventing your computer from starting.

  I'm not trying to say he'll be all this trouble, just that it will be worth the effort to prepare for this eventuality.