Specs of the device control construction

Similar Questions

• Rendering of the image browser on the device controls

  Hey experts,.

  I tried to use BrowserFieldDemo to a remote web server web content rendering. However, content of the image shows image and placeholder image never make correctly on the device. The Simulator is very well. Make sure that image getResource() download code is the right place. I am running sdk 4.6.0. Here's renderOptions:

  I finally figure out this method of connection download image are different with connection download html. When I test Simulator, I use default MDS, one device I've tested via WIFI and couldn't make connection on image download

• on the device control panel hpofficejet 6500 E709n up whenever I turn printer cannot cancel

  On the control panel of device HPOfficejet 6500 E709n - align the printheads continues to come the Cancel button is on and I can't undo this action.   I turn the printer off and it always happens and I can do anything on the control panel

  Thank you Delores [redacted for privacy]

  So go ahead and align the print heads do not cancel.  Ensure alignment and the leaf print and follow the instructions.

• where is the Device Central which exist in CS5 Cs6?

  in Adobe Flash Cs5's Device central to choose and test Air android with the brand and different resolution

  but I can't find it on Flash CS6!

  so, how can I test my Air 3.2 project in various resolutions and devices?

  Since you're under Android, even if it is not so easy, you can consider using the tools Android SDK to test themselves on several emulated devices. He has a Manager SDK to allow you to test it against any Android OS you want in a core of real emulated ARM or there is also a nucleus of atom to Intel x 86 (runs a lot faster on a x 86 system) generally for each version of firmware OS as well. It comes with certain configurations by default for devices, but you are free to create your own device from the ground upward. You then use the command-line tools to install your APK on the emulator and then take it for a spin. You will not find better emulation than that.

  This is the default config of Nexus 7 running and I use the Intel Atom rather than the ARMv7 driver because the ARM emulation is rather slow. You can even imitate the cameras or use webcams for them, allow it to use your OpenGL capabilities, etc.:

  

  Again, as you can see, I use the Nexus 7 on OS 4.2.2 using Intel Atom. You come to select your configured profile and click on 'Start' and an emulator will go up.

  All of this comes with the Android SDK, which you can download here:

  Android SDK | Android developers

  The device control panel is comprehensive enough. First you set up a basic device:

  

  Then on the basis that you can create variations:

  

  This allows you to target very finely and get a better idea of how your application will work in many different OSES, hardware configs and environmental factors (space low, high, fast/slow GPU hardware controls, physical keyboard, etc.). Give it a shot!

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• C7280 - cannot scan. Error message indicates another program has control over the device

  I open the HP Device Manager to do a scan. I accepted the parameters and the scanning started. But the part passing through the analysis, I stopped the scan that I realized that I wanted to change the resolution. I leave the Manager device and rebooted but when I did, I got to tell an error message:

  'Cannot perform the function you have requested because another program has control over ice dev'.

  I have nothing else open and so I can't work on what program has control over the printer.

  C7280 Prtinter. Mac OS x 10.7.

  The Device Manager has not been updated for Lion and there is still no specific Lion software for your printer.

  So far, you have the choice of scanning with picture Capture or preview.  I'm sorry.

• best practices for the structure of the code control multiple devices in a sequence-step 2

  I have a question about code architecture and to get multiple devices controlled and synchronized for an experience. It is an 'architecture' - type application, so I hope for some suggestions on how to proceed.

  I run an experience in which I order 2 NI PCI-6733. I will soon add a Tektronix AFG 3022 B and have long been turned off the opportunity to rewrite my code labview from the ground upward. I inherited from a previous search, and although functional, I want to make it easier to modify and divide into sub - VI and these. Link to the current program (labview 8.6.1) is here if you do not want to see the code that is currently used and Subvi is in a zip file. The current version of experience consists of one stage, all writing the data for PCI cards is saved for the end. I need to change that in my configuration again well.

  The new experience consists of 2 steps. The first will take place (loop an array of output for PCI cards) until he heard a 'real' another computer (connected via TCP). When you do that, it should go to step 2 and run a sequence (usually 10 ^ 5 timeunits of length, where the unit of time is 0.1 ms) which refers to two PCI, the AFG 3022 B cards and with the flexibility to add more devices in the future.

  The most popular would be structural advice. How to organize the screw, if it's good to use a VI 'master' that would control the two sub - VI phase 1 and 2, etc...  Feel free to ask for more details if it helps clarify my question. Thank you!

  Such programs typically use a kind of State machine.  You will find many tutorials on LabVIEW state machines in these forums or forums of LAVA.  If you do a rewrite, I also recommend that consider you the LabVIEW classes.  They help modularize your code and do more reusable subparts.  You can end up with less to maintain, accordingly.

  You can also consider TestStand.  It was designed to perform sequences of tests, so can make your life easier.  It would be also exaggerated gross.

  Let us know if you encounter any problems with the machinery of State or classes.

• my sound keep disappearing. When I go to the volume control, it says no device installed. I have been through all the steps. How can I get my sound back?

  my sound keeps disappearing.  I go through all the help and support the steps but still no sound.  the volume control is all grey and says no audio device found.  but the Device Manager indicates that all is well.  What is the problem that I continue to have?

  Hello

  1. the troubleshooting steps are you referring?
  2. don't you make changes on the computer before this problem?

  The following article might be useful.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Not the 'Volume Control', I get the message "there are no available active mixer device." ____

  I went through the troubleshooting help utility and when I opened 'Volume Control' I get the message "there no activemixerdevices available". I tried different things, but still no sound can u tell me how to recover the volume control because when I click on it says "there no activemixerdevices available". and when I go to control panel, sounds and audio devices it says no device and grayed out. Please HELP NEED HELP URGENT

  Update:

  I mixer by updating the driver but when I go to the sound and the device it says "No. Audio Device" in the volume tab my speakers work perfectly with my mp3

  If not, do that, if the above does not work:

  Insert your XP CD in your drive. Do not start. Then:

  Start > run > type in msconfig > OK or Enter > click on extract files > then file to extract = sndvol32.exe > then tap your CD-ROM drive as the source > extract to c:\windows\system32 > can Extraxt > crush is required > if it does not re-post.

  See you soon,.

  Jerry

• BlackBerry Smartphones blackberry 9000 mds on server and the device (mds control center)

  Hello

  I have the following problem. We use the SDM Service on the server to push the software programmed on a few blackberrys (e.g. 8800). All Blackberrys are saved on the server in the list of mds.

  The new Blackberry 9000 does not appear in the lists of mds. And after the activation of the SDM control center is not on the device. the control center of mds push automatically by group policies. but I can't found on the device. How can I make the blakcberry 9000 working with SDM on the Enterprise Server BES services?

  We use the 4.1.4.15 version.

  I'm sorry for my English. IM German.

  Thank you.

  !! UPDATE!

  I had a contact with level 2 Support T-Mobile. They told me to download the latest firmware to the updatecenter of t-mobile (has not heard of so far), then install this software on a PC and install the MDS Runtime of this package to the devices.

  After the url of the download location, where I found the firmware:

  http://updateservice.t-mobile.NET/BlackBerry/download/download.do?ref=%2Fservices%2Fftp%2Fproftp%2FS...

  --> Download

  --> Installation for PC

  --> Start the Desktop Manager

  --> Connect Blackberry "BOLD"

  --> uninstall all the "fragments" of MDS duration of unit

  --> restart the Blackberry device

  --> Install MDS DURATION & MDS default Launcher (V 4.6.0.13)

  --> Restart device

  You're good...

  The "BOLD" today BBlackberry is a device registered and within seconds all of our MDS applications when pushed to the device and work perfectly.

  I hope this will help you too.

• When I try to view my devices to Control Panel/hardware and Sound/devices and printers, he treats forever and does not show the devices.

  When I try to view my devices to Control Panel/hardware and Sound/devices and printers.  It treats forever and does not show the devices.  I need help!

  
  Original title: device and Printers window
  There could be various reasons why the window devices and printers stalls. All the control points are listed here.
  Fix devices and printers folder is completely empty in Windows 7

• Did not push the file control point (no space available on the device)

  Hello

  I use Proliat HP DL 380 G5.  8 GB (RAM) 61 GB of space

  (RAID0 + 1) second HARD drive has failed while working on a HARD drive at the moment...

  After 20-25 minutes, I can't ping my VM OS which is Windows 7 (active)... and events, I see this error...
  Did not push the file checkpoint at 05:00 (no space available on the device).

  Details of the event:
  	Type: error Description: Error message on WINDOWS-PRTG on localhost.localdomain ha-Datacenter: impossible to reach 5.3 GB of file control point: no space is available on the device. Time: 09/12/2015-10:05:31
  Error stack:
  	Did not push the file checkpoint at 05:00 (no space available on the device). Failed to prepare the file ' / vmfs/volumes/56653def-ccd90fc3-0a42-001b783701ae/WINDOWS-PRTG/./WINDOWS-PRTG-f1e094f5.vmem ': 28 (no space available on the device). An error occurred during registration: 28 (no space available on the device). Impossible to suspend the virtual machine: msg.suspend.error.SUSPEND_E_NOSPACE.
  Additional event details:
  	Type ID: error Build host: 3029758 Target object Type: ComputeResource Type of data center: data center The host object type: HostSystem VirtualMachine object type: VirtualMachine ChainId: 201

  Could you help me solve this problem?

  Thanks in advance

  * Note * I found the solution... Before I used the system of virtualization and Citrix (XENSERVER) there was little different. That's why I'm stuck on a few easy steps... Well, the problem was that I use 61GB HDD, 5.5 GB of memory. When I create the VM I "ve used the maximum size of HARD drive and left no space for the SWAP file. I used 58 GB, and you have to assume + memory size, this means, 58 GB + 5.5 GB...   So who is right for which I didn't have enough space. Hopefully someone will find it useful. See you soon,.

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• Link URL in BB7, BB10 devices control? (for applications based on the web)

  Context:

  -App companies (customers are members of staff)

  -App is based on the web - no hybrid or native application but a URL

  -URL is located within the company's intranet

  Question:

  Is it possible to order this URL on BB7 10 devices? For example:

  1. drag the URL as a logo on the screen of the device (like apps look)

  2 remove the URL (and related logo) from the screen of a user if needed (for example user is no longer can access web app)

  Thanks in advance!

  Leyden

  I think the feature you're looking for on BBOS's channel Push browser info to article 5 in this doc:

  http://docs.BlackBerry.com/en/developers/deliverables/12029/Push_applications_for_the_BlackBerry_Ent...

  This functionality does not exist for BlackBerry 10, so you will need to develop a shortcut app, info here (talking PlayBook but work for BlackBerry 10 devices):

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/how-to-create-a-URL-launching-AP...

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.