on the device control panel hpofficejet 6500 E709n up whenever I turn printer cannot cancel

Similar Questions

• Libretto U100 - missing and unable to connect to COM7 Bluetooth device control panel

  I can't connect my laptop to my device. I want to "liberate" COM7 so that it appears available in Microsoft ActiveSync.

  As expected by using support & on my laptop, she advises goto Bluetooth device control panel, but this software is not available in Control Panel. It seems to be missing.

  Your help would be greatly appreciated.

  Com7 is the Bluetooth COM port server It is necessary if you connect from a device to the computer for example for Active Sync connection with a mobile phone.
  If you mentioned is not available. Then please check the following points:
  -Enter the DeviceManager and check under "Ports" If a COM7 has been properly installed.
  -Check if the COM Service is enabled in "Bluetooth Settings-> Options-> General-> Bluetooth COM port service"
  -Set the security settings to 'Standard' at end of test if it is not already the case
  -Do you have configured this COM7 already for another device? If so, just create an additional via Server Bluetooth COM port
  "ControlPanel-> Bluetooth Local COM-> Add-> create a virtual Bluetooth COM port for a server-> now select a port COM for example COM8.
  You configure the ActiveSync connection to the new COM port

• After you disable the speakers in the Sound Control panel, how to re-enable?

  On Vista 64-bit with latest updates, in a hurry to catch a signal continuously with the sound only through headphones, I turned off one of the entrances in the sound control panel, which was the laptop speakers.  This was done by selecting the element and selecting Disable in the right click menu.  When I come back to this Board for re - activate the speakers, they are listed is no longer and are not doing a scan for the hardware.  How can we reactivated the speakers?

  The audio device is "SoundMAX Integrated Digital HD Audio", and the computer is a Lenovo Thinkpad T61P.

  Hello

  Right click speaker near clock - reading devices - right click in the area of the boxes - check see the disabled and disconnected devices. Select speaker, then on the right click lower properties check the settings for the active device usage and so on. Also do the same to set up in the bottom left of this box.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Could not open "Manage audio devices" Control Panel configuration

  Could not open "Manage audio devices" of the control panel in Windows 7, but it later emerged to the waking from sleep

  Odd error, no idea of the cause.  When I start my computer and try to go to the sound control panel to manage my audio devices (at the present time, are what I plugged my SoundBlaster X - Fi Gamer and a Logitech 9000 webcam with microphone), often the Control Panel won't open, if I select "Manage audio devices" in the main window of the Control Panel, or if I select "playback devices". "Recording devices" or "Sounds" of the Volume in the notification area icon.  Then, when the computer is put to sleep and then woke up from his sleep, control panel of his poster.

  I don't know how or why, but something seems to interfere with the sound control panel.  Any ideas?  Anyone see the problem?

  (I use the drivers SoundBlaster to day and now Windows 7.  With Home Premium, incidentally).

  This problem is corrected... The cause of the problem was a bad logitech driver for the microphone to their webcams (I have the webcam for laptop)... In the new versions of logitech drivers, this problem has been fixed. I did a test of the beta with logitech to resolve this difficulty. Go to logitech and download the latest drivers for your webcam and it should fix this error.

  Sven

• the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

  The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
  It does not show in the other browsers, other people can see it, but I can't.
  Even with these sites:
  http://www.jokevan.nl/HTML5/oef3-3.html
  http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• black vertical line when using the charger on my HP 6500 E709n

  When you use the loader on my HP 6500 E709n, I get vertical black line in the middle of the page.  It appears on outgoing faxes just like any time I copy or scan.  He can't if I lay the originals directly on the glass, only when you use the charger. I am new to this forum (or any forum also), but I looked at the messages about similar problems with other models, but have not found a solution.  Can someone help me or point me in the right direction to find an answer?... Thank you!!

  See post from 20/09/11... It must be gently the magazine cover to reveal that the slot of the animal auto scan and clean only...

• I can't find the touchpad Control Panel

  I can't find the touchpad Control Panel.

  @ejake

  Hello

  Download and install the driver for the Touchpad ALPS to here.

• T430: Cannot change the GPU using the NVIDIA Control Panel

  Hello world

  I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.

  When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.

  Do you have any solutions?

  Thank you very much.

  
  

• The hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view.

  The same thing happened to me recently: the hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view. Click on "Show common tasks in folder" but that doesn't change anything. Finally, I tried a restore without success point. No idea how to get back the link "control Panel Home"?

  Thank you very much for your support

  Alain Truchat

  Split from here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/left-hand-pane-on-Control-Panel-missing-XP-Home/6ca7e184-e2be-4709-b865-81e5c3702629#last

  Hi, Alan.

  Reset Control Panel-
   
  Press Windows key + R
   
  Type inetcpl.cpl regsvr32.exe/n/i
   
  Press ok

• Installed programs do not appear in the Windows Control Panel

  I use Windows XP SP3.

  When I install a program, in this case my Mustek BearPaw 2400TA more scan, it does not appear in Control Panel. I reinstalled the software of the scanner several times, but still, it never appears in the control panel

  Also, is there a way I can have complete control on the control panel? To activate the newly installed programs, etc. ?

  Hey bud,

  Please write in the Microsoft Community Forums.

  According to the description, I see that the Windows Control Panel shows all the programs installed in Windows XP.

  I suggest you to follow the article provided to solve the problem:

  Incorrectly, Add/Remove Programs tool displays installed programs

  http://support.Microsoft.com/kb/266668

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  
  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Due to operating system Windows or anything related to the printer, feel free to get back to us.

• Error: Could not find the com.sun.deploy.ControlPanel of the main class when tried to open the Java Control Panel

  Original title: could not open the Java Control Panel

  I just downloaded a new update of Java 6 and it doesn't work. I use Java to view charts & graphs of changes in the stock market & it works with applications that I used before, but not for that I started to use after the new update has been installed.

  I tried to fix it by clicking on the Java Control Panel & I get this message:

  Class main com.sun.deploy.ControlPanel is not found

  How can I fix?

  Hi Chris240560,

  Try to Uninstall and reinstall java and check the result.

  For further assistance, we recommend you to make contact with The team of Support of Java for better assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Computer freezes Vista, get the error of the audio control panel has stopped working

  my computer is running windows vista Home premium and after it starts and connects to the home screen, it immediately freezes and it says the audio control panel stopped working and the mouse and the keyboard does not work

  Reference Dell inspiron 5305 windows edition running Home premium

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• Find the nvidia Control Panel after installed of new Vista Business (Spack2)

  Recently installed the new hard drive and therefore had new Vista Business installed (downloaded, with Service Pack 2).  The Nvidia Control Panel is 'gone' if I can is more set up two external monitors + for computer laptop is to say as a "clone".  PC automatically to an external monitor as soon as plugged in.  When I connect to an HDTV, it's same with a resolution of crazy.  Any advice?

  Thank you

  Hello

  ·        You have installed the drivers for the graphics card from nVidia?

  Once you install the drivers for the graphics card, it automatically installs the nVidia control panel. If you had bought the graphics card, you may have been provided separately with a DVD, check also in the DVD provided with control panel map.

  To download the latest drivers follow the link given below.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.