Spelling red line underneath the text

Similar Questions

• Red Line is the time average Budget?

  I have a question about the red horizontal line in the editing of the frame window. I understand, it keeps track of the "time budget". If all the bars are underneath, the swf file runs at the desired images per second. If some of them are above him, your slow running swf file. Right?

  My question is this:

  The red line is related to the performance average over a certain period of time?

  I ask because I noticed that all my bars (in the editing of the frame window) are below the red line. But when I click on a few individual images, the Summary window tells me that the Framerate is under the framerate of the target, i.e. the bar should rise above the red line.

  So I'm a bit confused. I have attached a screenshot that I hope enough clear to read.

  The desired flow is 40 fps and the instantaneous current framerate is 29.9 fps. But the bar is below the red line.

  

  Also, I had assumed that the scale on the vertical axis of the histogram of time the image has been linear.

  i.e. If a framework took twice as long, the bar would be twice as high.

  But I noticed that it doesn't always seem to be true.

  My guess is that framerates vary naturally from one image to the image a bit and Scout made a sort of average time and smoothing. But I could be completely wrong! I always try to work my way around Scout. Thanks a lot for your help!

  Damian.

  BTW, the Scout is amazing! An incredible tool.

  Your code is the colorful stuff, not the grey matter. More colorful stuff is under the bar, more your code runs. Your code looks good here.

  You run with 31% of your budget by image 25ms (he says in the summary Panel). 25ms is 1000ms/40 fps.

  The red line represents the desired SWF frame rate. This is usually set when you create the SWF file in Flashpromanager.new, FlashBuilder, or other tools. It can also be defined as directly in ActionScript code. Because yours is at 40, you must have already established it somewhere.

  You must watch the gray bars. Represents grey time waiting for the next frame, not the time spent running your framework. Grey is good. If you don't see any grey below the red line, your code takes too long to run in this context. The gray bars show you the actual intervals between each image. In your case these are alternately above and below the line. If you select a range of images, you will find that the average lies at 40, but each individual image will be more or less. The flash player has an internal algorithm on average these intervals to make your desired rate. The player prefers rate divide evenly into 60, 60, 30 or 15. If you choose other tariffs, it adjusts managers so that they are part of this trend. So you see altering executives who kindly to 40 fps on average. It is the normal player behavior. It does this so that several sessions of flash put too much demand on the CPU to wake only intermittently reliable.

• I had a red line on the audio portion of my clips why? FCPX

  can someone help me pls, I had a red line on the audio portion of my clips why? FCPX

  The red line shows that you have marked these clips as "rejected."  (and blue = keywords, green = favorite, etc..)

• Add data at the end of a specific line in the text file

  Hello

  I'm trying to add data at the end of the last 4 lines of the text file attached with the ' table to add.  4 rows (422.5800 entry), I would add the first entry of the 'Array to add' entry, on the 5th line to add the second entry of the 'Add picture' and so on.  How can I do this?

  Any help will be appreciated.

  Sincerely,.

  hiNi.

  After re-reading your post, I think that's what you really want to start adding after the first 4 rows.

• There are red lines throughout the screen on my Pavilion dv7-1240us laptop

  Pavilion dv7-1240us, windows vista 64-bit, without updates to the system

  There are red lines throughout the white background screen, it's very annoying. I was wondering if it could be the graphics card or is there a fix for the firmware/software that can be done to correct this situation. Everything seems to not work properly

  You are welcome.

• Adobe Reader highlight tool is more full of text, simply create a line around the text

  The highlight in Adobe reader tool no longer works as before.  Instead of filling the text, as it is used, the tool creates just a line around the text.  This makes it much harder to identify strengths.

  I am running Win 8 and using Adobe Reader XI version 11.0.09.

  I have attached a screenshot to illustrate.  The way the tool used to work, they testify as I want it, highlight all the text in the document.  As it is it currently works, is shown on the first line of the text, where a part of the text was highlighted with the tool as it works now.  I have just created a yellow line around the text.

  I checked how the highlight settings are both the former highlight text and the new text, and they look identical.  Percentage of the color settings and opacity are the same.

  

  Very frustrated.  Any help appreciated.

  Try to run a repair from Acrobat (via the Help menu) installation.

• Referring to the line in the text field

  Hi, this is probably very simple, but I couldn't find anything in the net.

  How can I take specific line of the text field. In my case, it will be number and I am planing to use parseInt. on this channel

  example:

  LINE1 = 001

  Line2 = 002

  line 3 = 003

  ....

  I'm in position to take this "002" line2 in

  Something like the following might work if the text is in a list with the new lines for each line... "tf" is the name of the instance of the TextField...

  var stringArray:Array = String(tf.text).split("\r");
  trace(stringArray[1]);

• Strange line under the text after the table conversion

  I've converted a few tabs text to a table, and I have black lines under the text. Where it comes from and how do I remove it.

  See attached screenshot.

  Rich

  Here are the rules of paragraph. The original paragraph had a rule below, and divide the line into separate cells repeated for each cell.

  Check if the rule is set in the style of paragraph applied to these texts (this is according to the rules of the paragraph); If so, disable it here. If not, just select all those cells and press Ctrl/Apple + Alt + J; Select 'Rule' below the menu drop down and uncheck "pronounce on.

• How to write to several lines in the text element?

  I tried to write 2 lines in the text element, however only return one row:
  
  : myqueues.queue: = "Hello" | Chr (10) | ' world ';
  
  It gives me only 'Hello' in the first line and nothing else in the 2nd line.
  Are there settings needs to be activated in the property of text element?

  Try this:

  DECLARE
  v_filename VARCHAR(50);
  v_handle text_io.file_type;
  
  begin
  v_filename := get_file_name(file_filter=>'All files(*.*)|*.txt|');
  if
    v_filename is null
  then
    bell;
    return;
  end if;
  
  v_handle := text_io.fopen(v_filename, 'r');
  
  go_block ( 'myqueues' );
  clear_block;
  
  text_io.get_line(v_handle, :myqueues.queue );
  next_record;
  
  text_io.get_line(v_handle, :myqueues.queue );
  next_record;
  
  text_io.get_line(v_handle, :myqueues.queue );
  next_record;
  
  text_io.get_line(v_handle, :myqueues.queue );
  
  first_record;
  
  text_io.fclose(v_handle);
  
  exception when no_data_found then text_io.fclose(v_handle);
  
  end;
  

  Published by: Magoo on 02.10.2009 12:01

• Equium M40X: red lines on the screen

  I seem to be getting red lines on my screen (from top to bottom) that I have spend my mouse.any idea what is wrong. That is to say what is the screen or something else.
  However, I connected to a monitor and had the same problem so assume that my fine screen.

  Maybe my graphic.and so yes anyone with a solution or do I have to disassemble everything this...

  Thank you

  I agree with Richard. There's probably graphics card failure. If the same behavior occurs during the starting procedure, the graphics card must be exchanged. I mean the motherboard together. ;(

• Problem with end of line in the text file.

  Using LabVIEW 2010 on W7 64 bit in the USA.

  I have an application in which I write in a text file.  I use the function "Write to a text file" to write the text and "Reading a text file" function to read again.  My problem is with the end of line character.  The text that I write is a long chain, not an array of strings.  While building this chain, I insert the constant EOL of the palette of channels function to indicate that a new line is planned.  My tests showed this EOL constant values of consecutive bytes 13 and 10.  After writing all the text in a file, I can open the file with Notepad, or Word, or something else, and it is displayed correctly.  When I read he returned with the function of text file reading, I'm trying to parse the string by searching for the same constant EOL, but it does not work.  A closer examination of the extracted string from the file reveals that the value of end of LIFE has changed for only 10.  The location of the byte to 13 disappeared.  I know there is a note on the writing of the function of text file add/change the EOL characters, which are the default values of the system, but the note specific tables.  I manually put the value in the string.  Does anyone know why this happens and how to fix it?

  Thank you.

  The help of reading from text file function

  The function converts all characters in end of line break characters online platform, dependent unless you right-click the function and remove the check mark next to the menu item Convert EOL .

  Right-click your reading and uncheck the EOL conversion.  I recommend to do the same thing to your writing to text file feature.

• Display a red line on the left side of the monitor of g-sync XB270H

  Hi, just bought the Acer XB270H G-SYNC monitor and a red line appears on the left side of han (has I am facing screen)

  It is an intermittent fault 50-50.

  The samsung monitor, I ran before never missed a beat.

  I'm under z77 mb, i5, GPU 780 TI.

  Thank you

  Tim Claypol

  It is: settings / bar refresh rate / options / 4 pixels wide / 8 pixels wide on / off

• Red lines on the bottom of the screen of the high tower

  On my laptop (SONY VAIO VGN-CS33M) screen, the red lines are showing on screen, color lines are keep on changing anyone can advice me a solution.

  Hello

  can you try to connect an external monitor and see if the red lines still appear. Also go into the BIOS settings and also observe if the settings screen red lines presents itself in this BIOS .

  How get int BIOS your laptop:

  1) turn on the computer.

  (2) press the F2 key when VAIO appears logo.

  The BIOS Setup screen. Otherwise, restart the computer and press on the

  Key F2 repeatedly when the logo appears VAIO.

  How to get out of the BIOS:

  Press the arrow

  key (left or right) to select the exit, select exitand press the enter key.

  At the confirmation prompt, press on the

  Key entry .

  LC

• Internet explorer.live/apply stationary/moving the window wanting to go mail, red lines of the EEG in a few words, how to remove have Window vista.

  Red under the line u, & then my friend asked why some of the e-mail was under the red line. Just got this new computer, it's not like the old.   Thank-, just wanting to delete, so it's gone.

  Hi Lorraine,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Last line of the text Telnet cups

  It's on a Vista computer. When the user is on the last line in the window, more half of the fonts character is cut off. There is no way to scroll down lower to see the line of text.

  Hi AirForce9797,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Windows Vista Networking forum.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]