Spinner widget will not change color

Similar Questions

• Background color in the body will not change

  Hello

  The background color in 'body' will not change. I even tried to change it to "reset" and it didn't work either. But I can change the color in 'wrapper' etc. Someone has an idea what could be the problem?

  / Milda

  / * Global * /.
  HTML {}
  Body {background-color: #E7E0C9;}
  }
  

  / * Containers * /.

  #wrapper {width: 900px; auto margin: 0; background-color: #FFF ;}}

  Wrong code in the header of your document somewhere.  Run your page through the validator and fix errors that occur.

  http://validator.w3.org/

• My professional background of Windows 7 will not change.

  I have a Windows 7 Professional 32-bit computer, and will not change the background.  It is stuck on one front image, no matter what I did.  Now it is stuck on one color, I can change the color, but not to any real image.  I have a theme that has a slide show, but when I chose the theme, he said that my background is the photos for the slideshow, but when I look at its still a solid color.  If I right click on it does not give me the next opportunity to "change background".  There is an unsaved theme assigned a background in one color, but its not selected, and even if I select it and change the background it goes backward.  I can't even change the background, when I right click on an image and click on set as background.  If I save the theme, he recorded with the bottom, I wanted, and then creates a new theme unregistered with the solid as the background color and uses.  Any help would be appreciated.

  Hi, I found new information that might be useful.  It's in another thread, but I can't immediately find, but here is the important part:

  1 - Go to this folder: %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\
  (copy and paste that in the start/search or Run box).

  2 - remove the TranscodedWallpaper.jpg file.

  3 try to set your wallpaper again.

  Sorry I can't find the link, but it was a confirmed a team of Microsoft TechNet blog.  I hope this helps!

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• My your whatsapp will not change after update

  I'm back changing my tone whatsapp after the update, but it will not change back

  Greetings, cazrose. Thank you for the communities of Apple Support!

  I see that WhatsApp is not allowing you to change his ring back to what it was after upgrade your iPhone to iOS 10 6s. I'll be happy to help you!

  How can I change my ringtone for WhatsApp? -Follow the instructions of the support that I have found on the site of WhatsApp.

  Have a great day!

• How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  How can I change my country when I have a balance that I can't buy anything with? It will not change me cause I have a balance of 0.07 pence

  Click here and ask the staff of the iTunes Store to zero the balance of your account.

  
  (142584)

• Portege M700 will not change the screen orientation

  I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:

  "Open Webcam driver fail - please restart camera or computer."

  I reinstalled the drivers of many times, and it still does not work.

  Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.

  The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.

  You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.

• Keyboard and spell check language will not change back to English after a stint at the French although everything changes again in English

  I changed language iPad in French (but not the region, which remains United Kingdom) in order to write an email in French.  Everything on the iPad changed in French as expected.  When I'm done I changed the language to English (UK) and everything changed in English unless the auditor keyboard and which remained in French.  I then changed to English (India) but the keyboard and spell checker is in French.  I have changed the language to the French and finally back to English (United Kingdom).  While everything on the iPad to the language changes expected, the keyboard and spell checker will not change to French.  How do go back to English?

  Press the 'globe' and select English.  It is the keyboard that determines the spell checker (not the language or region).

• Apple's music will not change the song on shuffle mode

  My iphone6 will not change the songs Apple music in shuffle mode. Once selected the song again and again.

  Hello

  update your iphone to ios9.2

  Settings > general > software update

• Mini 210-1080NR: down loaded Windows 10. view now showing BACK script and will not change. Mini 210-1080NR

  Try load W-10. Process appear to be normal. The display is now BACK showing script and will not change and cannot close the laptop down or off. Not a user made and do not want to complicate the issue.

  WAWood;

  The laptop has completed W - 10 download and installation seems to work as announced.

  The problem with the 1st attempt will be captured in Gremlins.

  Thank you for your quick response.

  Ben

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• EA4500 will not change to the new public IP address

  I noticed that, after the new Firmware update, the EA4500 will not change to a new public address.  I check my logs and my IP address is the same that goes back to a 25/03/2012.  I changed my router to my old E4200V1 and it turns into a new address when the old one expires.   I tried several resets hard but in vain.

  Ask your ISP. The decision taken by the DHCP server from your ISP, what IP address it assigns. You must accept what they give.

• HP 15-r018dx Notebook PC brightness will not change

  Will not change the brightness on my HP 15-r018dx Notebook PC, without using the function keys or cursor in "Power Options." This started happening the day before yesterday; before that, I had no problem. I don't know what changed between yesterday and today.

  Could someone help me?

  Hi wkeyiosksol,

  Try using the Recovery Manager HP to restore the original drivers. Search for your graphics drivers and install them. Should be included as a high-definition or high-definition of NVIDIA Graphics Driver Intel graphics driver.

• HP Pavilion 15z Touch: screen brightness will not change

  When I use the keyboard commands to adjust the brightness of the screen, it does not work. When I go into the control panel to set the brightness of the screen remains the same. The adjustment bar will move from dim to bright but the brightness of the display will not change. How can I fix it? I've only had this computer for 4 days, so everything is still at the factory.

  Hello @KayLeeM,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I came across your post about the brightness of the display and wanted to help!

  Try searching for the Device Manager in the Start Menu.  Then expand the monitors section and see if you have an option for Generic PnP monitor.  If so, do a right-click on him and generic PnP monitor enable, if not already.  Now, check to see if you can adjust the brightness.  If you're still having problems, then try to see the following resource and let me know how it goes:

  Difficulty of Windows 10 brightness control works not problem, here's how to [Guide]

  (Not a HP website supported).

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Kind regards!

• Envy 14 DVD will not change the region Code

  My Envy 14 is until the last amendment of the Code of the region, he told me that he can change the region Code 1 more time but it WILL NOT change the region code.

  I try to change in the properties of the device of the "DVD RAM UJ897', he said 'this is your last chance to change your DVD drive region setting. Are you absolutely sure you want to continue? »... I click OK, it asks me to insert the support in this area (it is already in the tray)... I re - insert the Code region 2 DVD, and I get the error "failed to update the region Code setting. Please make sure the drive contains a region 2 media (it does) and you have administrator privileges (me) «...»

  The HP MediaSmart SW also tells me "Drive region code: region 1.» Number of times where you can change the region code: 1 ",... .He told me that the inserted DVD 2 Code region and asks if I want to change... I say yes, then confirm and nothing happens. I can't read the 2 region code DVD...

  Hello

  Start in safe mode by pressing f8 when you start your PC.  Use the arrow keys to select Safe mode and press return.  Once charged, try to change the area by car.  If it still does not work, try the procedure but with another another DVD zone 2 under Windows can be picky about what it accepts.  If it works, just restart your PC and Windows does not start normally.

  Best wishes

  DP - K

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.