Libraries does not respond after a clean installation and installation of all other drivers and programs
Recently, I did a clean install of Windows 7 Ultimate. Everything has been removed from pilots to programs. I also removed a Windows.old folder to save space for now, I use an SSD (Samsung 830 Series).
Hello
Thanks for posting the question in the Microsoft Community!
Libraries are unresponsive.
Some third-party programs may cause the problem.
To work with the issue, I suggest you follow the steps:
Method 1: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
See the mentioned site:
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.
Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).
Method 2: Check the hard disk for errors
Check a drive for errors
http://Windows.Microsoft.com/en-in/Windows7/check-a-drive-for-errors
Note: When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
Tags: Windows
Similar Questions
-
End of 2012 iMac keyboard does not respond after sleep
I have an iMac late 2012 and my keyboard does not respond after that lay down the computer. When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter. In my view, that it is a common problem that I am many have known for a few months. Is there a solution to this I have reset PRAM and SMC, and no work. It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.
I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all
-
6 Lightroom does not respond after sycing mobile application
6 Lightroom does not respond after I tried to sync with mobile App. anyone having this problem?
Trudy
Hi uncagedwoman,
- Please go the library Module, then go in the preferences.
- Go to the performance tab and uncheck the option "use graphics processor.
- Restart lightroom. and check
Please let us know if it helps.
Kind regards
Tanuj
-
My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer
Hello
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.First check this thread in case it is simple and if not to come back to this thread.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you do not have your system disks
manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (to do the system restore there only to)
being bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)RESTART Windows
I hope this helps.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?
If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.
Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools
Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools
-
address bar does not respond by typing the URL and press on enter
Address bar does not respond by typing the URL and press to enter. All the other links work well. I used version 7 and version 8 upgrade did not fix the problem
I had the same problem. I just uninstalled digsby ask toolbar, and now it works.
-
HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake
Hi all
Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.
But... When I try to do something after the machine is in "standby mode" everything goes wrong.
1 - printing takes longer path to front.
2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.
3 - wireless devices sometimes have trouble with the connection to the device.
4 - access to the machine via the web interface content (yet) is slower, if not impossible.
When I manually reboot the printer (using the power button) the machine works fine again.
But I can't immagine what how HP intends to use the machine.
Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?
Also is it possible to disable the sleep mode at all?
Thanks in advance.
Kind regards
By Duringshoff
The program installation/Specs:
The printer that is connected to a switch. Connected to the router (wireless).
Printer is not directly connected to any computer over the network.
On the printer, I put 'Sleep delay' to '1 hour '.
On the printer, I set 'Auto Power' down on '' never. ''
MacBook Pro 13 "under OS X 10.9.1"
Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)
IPad IOS 2 7
IPhone 4 running IOS 6
router: Cisco EPC3925
switch: Netgear GS108
Thanks for letting me know Per_Duringshoff.
I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.
10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.
Let me know when had time to try the steps listed and if it helped.
Have a nice weekend!
Thank you. -
G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive
My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?
Help, please...
Sorry I couldn't answer yesterday.
The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.
Now Mr. President, I would like to know your end on this issue?
Thank you
-
Thunderbird starts by does not respond after the update to version 38
I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?
> I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.
This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General
-
Windows Mail does not respond after receiving a script error message.
Whenever I press a button made a noise of ping? can not shut down windows. Just does not respond?
"Em" wrote in the new message: * e-mail address is removed from the privacy... *
Whenever I press a button made a noise of ping? can not shut down windows. Just does not respond?
Right click on the taskbar background > select Start Task Manager, on the Applications tab, select Windows Mail > then end task.
Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/
-
Elements Organizer 9 does not respond after failure
Hello
I hope someone can help me as soon as possible about this. I just change the pictures in the item editor, open the photos in the Organizer. The power's out, computer off. When the power came back, editor works very well. But organizing but as soon as I click on a photo, she weaves, Greys ot, unresponsive. I click to let him recover, but it does not work.
What happened when the computer shuts down as it causes this? I am new to PC, so need a lot of details.
Thank you very much for any help!
PS: Windows 7, Dell Studio computer.
If this does not work after you remove the file preferences too, I would try this http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Ref215030515
-
HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1
Hello
After a clean install of windows 8.1 the audio beats does not open.
It appears in the control, but when I click on it nothing happens.
I have sound, and everything seems to work ok, but I'm curious to know what happened.
When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.
I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.
Any help would be appreciated
Hello
Download and reinstall the Realtek HD Audio software at the following link.
http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe
When the installation is complete, restart the laptop.
Kind regards
DP - K
-
Tecra S3 - Intel PROSet/Wireless window does not respond after changing settings
Given that I've updated the driver and the utility Intel PROSet version 9.0.4.17 driver and tool PROSet to version 10.5.0.1 for Intel BG2200 WLAN card to build-in the PROSet tool window freezes every time after that I changed a parameter (for example, by adding a new profile).
Closing the window with ALT - F4 also does not work unless you kill the process in Task Manager.
Is this a known problem or is there any group of fixes for the driver or the Intel PROSet tool available?
Hello
The ProSet utility is a clean product Intel and if there are updates you find on the Intel Web site.
But in my opinion, there is only a corruption of installation.
How do you install this app? Have you removed the old version first?I think that if you want to update the programs, you must always first remove the old version and then after reboot of the new laptop, you can begin the installation of the new version.
You could use additional own program register as a CCleaner. It s a freeware application and it checks the registry for some corruptions.
-
bridge to aid does not respond after the effect presets
Bridge stops responding when you try to use or to get an overview after effect presets. The application never gives me the error "not responded" but but does not not in stocks. It could be because the computer is old?
MAC
10.11.4
3.2 ghz intel core i3
12 GB of ram
ATI radeon HD 5670
Measures taken
Destroyed bridge preferences.
Uninstalled the application > Reinstalled
Thoughts?
This has been resolved with the new Update 2015 bridge
-
Lightroom 6 still does not respond after a certain number of shut downs and restarts
I used lightroom6 on a computer laptop windows 10 a few months with no problems. The last two days, I'm not able to launch the application after you stop and restart the computer. Windows Task Manager says that he does not.
Any suggestions?
I have the original CD but currently away from home and not be able to uninstall and reinstall.
any help is appreciated.
Windows Task Manager says that he does not.
If Lightroom opens upward, disable the use of the GPU in Lightrroom.Uncheck 'Use the graphics processor' preferences > Performance.
In addition, please ensure that you use the latest version of Lightroom.
Refer to keep updating Lightroom to download the latest version 6.3
I have the original CD but currently away from home and not be able to uninstall and reinstall.
Re installation is not necessary, but you can still use the Photoshop Lightroom Installer direct download link
Kind regards
Assani
Maybe you are looking for
-
Hard disk for HDD2183 enclosure?
Hello I have a Toshiba hard drive HDD2183 I want to recover data from. The laptop just does more work. I bought a 2.5 "IDE drive enclosure, but the connectors do not match. Does anyone know of a product that I could use to connect the drive to my reg
-
I want to format my hard drive, but have a backup copy of the Firefox information and passwords and bookmarks so recovered after formatThank you
-
Portege Z30 wasted the time of BIOS
I have the latest version of the BIOS (3.7, 1.40). I update the time of BIOS, press 'OK' and then F10 and then 'Yes', restart the computer and the operating system time is correct. But as I soon, stop the computer, the time information are lost again
-
Summary of the issueOther issues of Windows Live family safety What version of Windows Live Family Safety do you use? Version 2011 (15.4.3538.513) Choose your operating system version: Windows 7 Additional detailsHello team,my account has been hacked
-
Windows Photo Gallery does not start.
Whenever I try to open the Windows Gallery to organize my photos it stops working. It is said he's looking for a solution but never found. No one knows how or why this happens?