Spooler subsystem stopped working and was closed

Spooler subsystem app work in mind and was closed

Hi ploegske,

This problem may be caused because the LDP port is disabled. Here is the solution:

1. go in programs and features in Control Panel > on features Windows turn on or off

2. click on + sign of printing services

3. Select LPD and LPR. You must remove the Internet printing Client. > restart your PC to ensure there is no error in the spooler service.

4. Add once again your printer driver.

Hope this helps,

Steve <> Microsoft Partner

Tags: Windows

Similar Questions

Error message: SubsystemApp spooler has stopped working and was closed

Problem is with printer Epson EPL5900L laser which is not compatible with Vista. Found advice on forum Epson use XP driver and it should work, but try the message received the error "Spooler SubsystemApp has stopped working and was closed".

Drivers XP crashed the spooler service is provides printing functionality. Use a Vista / 7 compatible printer. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

Spooler subsystem app stopped working and was closed.

When spooler subsystem app stopped working and was closed, which is causing this problem and how can I reinstall it and continue to use my computer, I installed a new program on my computer?

Hello

1. What is the name of the program you are trying to install?

2. you receive an error code?

3. what happens when you try to print?

Refer, http://TechNet.Microsoft.com/en-us/library/cc766474%28V=WS.10%29.aspx

Please follow the links below to solve the problem.

Method 1

In Windows Vista:

a. click on start

b. click Control Panel, click programs and features,

c. click on Turn Windows features on or off, expand Print Services, clear the LPR Port monitor check box and select the Internet printing Client, and then click OK.

If the steps are still not then continue to.

Method 2

This problem may occur if a printer driver that is installed on the computer is damaged.

Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756 how to back up and restore the registry in Windows

To resolve this issue, delete the printers and drivers for printers, then remove the items that are under certain keys in the registry. Follow these steps:

a. If possible, remove all of the printers that are listed in the Printers window.

To remove a printer, right-click the printer in the Printers window, click Remove, and then click Yes to confirm the deletion.

(b) in the Printers window, on the file menu, click Server Properties.

c. on the tab drivers, remove all the installed printer drivers.

d. to remove a printer driver, click the driver, click Removeand then click Yes to confirm.

Start the registry (Regedit.exe) editor.

(e) export the following registry keys:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print


HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print


f. remove all items listed under the following keys (do not delete the keys themselves):
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-2
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-2

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-3

g. remove all items listed under the following keys by default:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors


HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors

The list of default monitors includes:
AppleTalk printing devices (when Services for Macintosh is installed)

BJ language monitor
The local port
PJL language monitor
Standard TCP/IP port
USB Monitor

"Windows NT Fax Monitor (if a Fax Modem is installed)"

For more information on the items are not by default, click on the number below to view the article in the Microsoft Knowledge Base:

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

h. remove all items listed under the following keys:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers


HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Printers

I. close the registry editor.

J. restart your computer and reinstall the necessary printers.

I hope this helps.

I got the error message "Spooler subsystem app stopped working and was closed".

I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file. I can not load a printer now. What is the next step?

Hello

You should probably check with Support from Adobe and their communities and Forums in case
There are known problems.

Adobe - Support
http://www.Adobe.com/support/

Adobe - communities
http://www.Adobe.com/communities/

Adobe - Forums
http://forums.Adobe.com/index.jspa

====================================

Check with the printer manufacturer for updated drivers and support for known issues.

Check chan seen message here - one of the highest.

fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

===================================

If the above didn't help:

Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).

Check Mr. Fixits here and if you use the other methods go back and try again later.

Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problems

Solve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

------------------------------------------------------
Logon as administrator

Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

You can copy and paste each line except those brackets and press ENTER after each.

net stop Spooler

(echo suppression of all print jobs)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

del/q %SystemRoot%\system32\spool\printers\*.*

net start Spooler

(sound Done!)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

If you use Control Panel - Classic - printers

Try after unplugging your printer if necessary.
-------------------------------------------------------------

Also check the spooler print and its dependencies and addictions Service.

The value of all Services back to their default values.

Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATOR

BlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

------------------------------------------------------------

Check this thread if necessary - to stop and erase the spooler

http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

and here
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

CheckDisk (chkdsk) runs at startup.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Vista SP2 after installing Spooler SubSystem App stopped working and was closed

After installing Vista SP 1 and 2 my printers no longer work. the message that I get when the computer is

"Spooler SubSystem App stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

When I try to print it says I have to install a printer but then says turn the spooler.
After turning on the spooler spooler turns his back on the coast.
I tried to uninstall and reinstall printers, but it won't let me install printers.
If I restore to previous date before installing SP1 and 2 printers work.

Online, I see that many people have the same problem.
I tried to contact Microsft but they tell me to contact HP
and when I contact HP they tell me to contact Microsoft, as it was their problem
I'm agree that Microsoft SP1 and 2 caused this problem.

Hello Lonny Jones,

Let's start by downloading the latest drivers and software from HP and see if that helps.

When you install the drivers, it is important to perform the following actions:

1. remove the printer from the PC.

2 uninstall the printer from the PC driver.

3 reinstall the printer driver.

4 reinstall the printer.

Several references to printer:

Open the printer Troubleshooter

http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

Why can I not print?

http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

Find and install printer drivers

http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

Microsoft Windows Spooler SubSystem App stopped working and was closed, rises whenever I starts and sometimes my printer driver or the printer disappear!

Whenever I start my computer when desktop comes up, I get this msg from Microsoft Windows: Spooler subsystem App stopped working and was closed. Most of the time I can still print but occasionally (when I need to print) my printer is missing, and the driver is not installed it is said. I got my printer mfg reinstall constantly for the last 2 weeks because of this problem! Peut anyonehelp!

Try this:

http://support.Microsoft.com/GP/printing_problems

That spooler SubSubsystem App has stopped working and was closed does mean?

Spooler SubSystem App stopped working and was closed means. I can't get my printer to print at all. Not even a test page.

Hello

Check with the printer manufacturer for updated drivers and support for known issues.

Check chan seen message here - one of the highest.

fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

===================================

If the above didn't help:

Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).

Check Mr. Fixits here and if you use the other methods go back and try again later.

Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problems

Solve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

------------------------------------------------------
Logon as administrator

Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

You can copy and paste each line except those brackets and press ENTER after each.

net stop Spooler

(echo suppression of all print jobs)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

del/q %SystemRoot%\system32\spool\printers\*.*

net start Spooler

(sound Done!)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

If you use Control Panel - Classic - printers

Try after unplugging your printer if necessary.
-------------------------------------------------------------

Also check the spooler print and its dependencies and addictions Service.

The value of all Services back to their default values.

Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATOR

BlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

------------------------------------------------------------

Check this thread if necessary - to stop and erase the spooler

http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

and here
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

CheckDisk (chkdsk) runs at startup.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

' Spooler Sub System App stopped working and was closed "__MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS.

' Spooler Sub System App stopped working and was closed ".
MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS

Hello

Check chan seen message here - one of the highest.

fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

===================================

If the above didn't help:

Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).

Check Mr. Fixits here and if you use the other methods go back and try again later.

Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problems

Solve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

------------------------------------------------------
Logon as administrator

Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

You can copy and paste each line except those brackets and press ENTER after each.

net stop Spooler

(echo suppression of all print jobs)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

del/q %SystemRoot%\system32\spool\printers\*.*

net start Spooler

(sound Done!)<-- you="" should="" see="" this="">

ping localhost n 4 > zero

Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

If you use Control Panel - Classic - printers

Try after unplugging your printer if necessary.
-------------------------------------------------------------

Also check the spooler print and its dependencies and addictions Service.

Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htm

How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

------------------------------------------------------------

Check this thread if necessary - to stop and erase the spooler

http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

and here
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

CheckDisk (chkdsk) runs at startup.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

"GPCore COM object has stopped working and was closed".

This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

Hello MikeF48,

Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printer

If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printer

After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

"Driver Installation module stopped working and was closed" error nvidia

Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

Since installing I can not any version of the nvidia drivers graphics card to install.

"Driver Installation Module stopped working and was closed" is the error that happens every time.

IM immensely frustrated by this

Why you post twice?
http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=114172#114172

Recommended to follow only a single wire

Installer of Modules of Windows has stopped working and was closed

Hello
I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago. When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed." I have already reinstalled Windows Updates and Microsoft Updates, nothing helps. Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
Help?
Thank you!

Greetings mollypopsicle,

I see that we have always had problems with this update. This leaves me with the question about the possibility of fi computer update auto is damaged during download.

I would like to have you create a folder on your desktop. Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

If you have a download manager, please use it to download the KB958623 update from this Web site

http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

Make sure you use the version of Windows Vista that applies to your system.

Once the download is complete and before running the update
1. Restart your system in safe mode with networking, as described in the above post from Brian.
2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
3. If this does not properly complete, were there a pop-up Windows indicating that an error? If so, what were these errors?
4. Maybe it's that the error you receive is that this update does not apply to your system. If so, this update can be hidden in your list of updates.
Here is a link on how to hide the update

http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

Select only the I'm getting offered an update from Windows that I don't want.

However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition. Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

Thank you and continue to keep us informed of the State of this update.

Best regards

Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

Error message: Message "Microsoft Windows Search index has stopped working and was closed" and TotalRecipeSearch Installer Plugin stub erros in Kaspersky.

Original title: TotalRecipeSearch Installer stub Plugin

Hello world

I have problems with the startup of Microsoft Windows. I get the Message below "Microsoft Windows Search Indexer stopped working and was closed" a problem caused the application to stop functioning properly. Windows will warn me if a solution is available.

I also have a "TotalRecipeSearch Installer Plugin stub" and "My Web Search Bar for Internet Explorer, client e-mail and messanger clients". in my Kaspersky Anti Virus. When I press fix it does not.

Can someone help me?

Thank you

Irene

Hello Irene,.

Thanks for posting in the Microsoft Community.

Since you are facing multiple problems, it would be useful if you can answer this question to help you further.

1 Windows operating system you are using?

2. have you done any recent software and hardware changes to the system?

3. what Fixit try you?

On the issue of Windows search, try the following steps:

If you use Windows 7, and then try the troubleshooter, another run the Fixit of Windows search.

Method 1:

You try to run the search and indexing of convenience store and check if this solves the problem.

Open the troubleshooter for search and indexing

Windows search Fixit: difficulty Windows Desktop Search when it crashes or no results

For more information, see the article:

Improve Windows searches using the index: frequently asked questions

Searching in Windows: frequently asked questions

Method 2: Rebuild the search Index.

a. open indexing and the Options to search by clicking the Start button, click Control Panel, click on Indexing Options.

b. click Advanced Options, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

About the issue with Kaspersky, try the following steps:

You can try to uninstall and reinstall Kaspersky and check if it helps:

Uninstall or change a program

Install a program

Note: Make sure you have the software of security or disk configuration files to install this later.

If you need further assistance, please answer and we will be happy to help you.

Windows Update, error: "Windows Modules Installer has stopped working and was closed".

Whenever I run windows update, and try to install an update for Vista, I get the error message"

"Windows Modules Installer has stopped working and was closed"

. This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

Thank you

Luke

Hi guys

I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

Thank you

Luke

manages scheduled tasks has stopped working and was closed

Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".

And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed). Set to automatic update referred to 'unknown error' (8 and 57, I think).

FYI, sfc/scannow reported no integrity violoations with system files. I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.

How this application problem "manages scheduled tasks" can be fixed? If you don't know, where can I get an answer? Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "

Craig in New Jersey

Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor. I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two. I'll report after awhile.

It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption. For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.

Craig in New Jersey

Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.

Message "Microsoft (C) Register Server has stopped working and was closed" appears

When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed".

Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit: .

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Spooler subsystem stopped working and was closed

Similar Questions

Maybe you are looking for