Spring push button
Hi all I'm new to LabVIEW and to learn for my final year project. Thanks in advance for the help from you guys.
I have a question here:
Is it possible to create a button with spring back effect? Medium, I wish have a switch on the Panel before which plays the controller of our car alarm, press once to trigger the action/movement, yet we do not have to press ONCE again to turn off and prepare for the next time.
Thank you if someone here is willing to give me a helping hand. Nice day.
What you want is the mechanical action "lock when released. The button resets when the terminal is read on the block diagram.
Tags: NI Software
Similar Questions
-
implementation of a push button
Hey I just started using Labview and I need for a project on the recording of the results of strain gauge. I wrote a code for data recording, but I don't know if he needs calibration I use the NI 9237 strain gauge module and how to proceed to make the calibration? I tried the example find in Labview but its me gives an error and I do not understand FPGA. My second question is I want to use a digital input module to implement a push button so that the code turns on when its market and it stops logging when you press OFF. I do not know how that proceed and what is needed in the code to do this. I posted what I have so far and any help will be appreciated. Thank you
"I don't actually like using the term 'guru', I actually perfer LabVIEW Overlord." It really scared in the peasants of LabVIEW. »
But seriously do anything is going to take a long time, is there no reason not to learn something. Heck that's why universities, people are going to lose time to learn.
Back to the original question a bit. NEITHER offers calibration options
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207895
https://www.NI.com/services/calibration.htm
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207957
http://www.NI.com/white-paper/12788/en/
Some hardware supports self-calibration but most don't. You can also perform the calibration of your car, but I can't find the documents for this right now. I think there is an example in the Finder of the example on calls to set the calibration offsets in the material.
-
How to create table of 288 HP push button in the PXI-6509 (3pcs)
Hi all
Need help...
I am a beginner in labview. & her first time use OR for my project.
We must push buttom about 288 HP control panel. We use PXI-6509 (3 pcs)
& I do a code (in tie).
but some time appear as a bug if we push a button push button after all. but some time is ok.
Please correct the code.
Thank you very much...
It seems to work fine for me. What do you mean by "sometimes appear like a bug? How is it not behave like you want.
A few recommendations:
1. There is no logical reason for the node feedback on some of your cables of the error.
2. you can turn some of your groups of buttons in a cluster. This way you can work on changing the value of a cluster and do not have to set up 100's of changes made to the values of the individual controls. You'd also be abe to easily use the cluster to table to transform your cluster of Boolean Boolean rather than building tables table by manually cabling up to 100's of controls.
-
I have a program I write has about 5 push buttons for a user to select the different scenarios. However if the user presses a button and then the other without turning off the first, then the two buttons are then immediately and that's why both scenarios run. How can I make sure if a button is pressed, it will turn off when another button is pressed?
Dennis Knutson says:
Just use the radio button control. ??? DK?best-use an enum, the drop-down list box, or control ring to select one of several "scenarios" as an option (and exclusive)
-
I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data. Here are my questions and dproblems:
1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.
2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.
3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure. (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)
4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time. I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.
Thank you for your help
Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.
Simple code goes like this:
- Containing the main code of while loop
- Inside of the whole loop is all user interaction code or modify the code entry
- Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
- Loop initialization above all if necessary
- Closing referrals and communications, etc after all loop
It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."
If you are just starting, you should do a free training have the capabilities of LabVIEW.
"Give me six hours to chop down a tree and I will spend the first four sharpening the axe. -Abraham Lincoln
Here are some free training focused mainly on LabVIEW and hardware tools to help get started.
-Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)
Learning OR training videos resources
Introduction to LabVIEW for 3 hours
Introduction to LabVIEW for 6 hours
Paced self-study for students
Self Paced Training beginner to advanced, required SSP
LabVIEW training Wiki - Containing the main code of while loop
-
change the push button for control or indicator at run time
Hello
I have a lamp that can turn into power according to the value of a Boolean variable.
There are two ways in which I can control the lamp.
(1) manual mode in which the button must be used as control to change the value of the Boolean variable.
2 auto mode) in which the value of the variable is changed programmatically. Push button must return to an indicator to indicate the value of the Boolean variable.
I should be able to swith bw manual and automatic mode for the duration and the push button should switch to control and indicator respectively.
For those who might wonder why it's necessary: there is a sign which must be controlled in manual/auto mode. in manual mode, operator will manually use the buttons as controls for updating the control variables, in auto mode, my control algorithm updates the variables, and the Organizer must be able to see which button is pressed and when. If the button should be the control of update of variables in manual mode and must be the indicator of the evolution of the variables in auto mode.
How is that possible?
A basic VI with three objects are attached, and the Boolean control variable is global.
Did.
-
How to control a box of series push button
Dear Sir or Madam,
I am relatively new to LabView and National instruments, but try to capture the response time of a human participant.
A simple example of the tasks that I hope to accomplish is described as follows. I think that first of all, I will write a Labview program to present two pure sounds to the listener (one at a time), with a tone have higher than the other ground. In other words, pure acoustic sounds will be delivered to the ears of the listener through a series of regular computer headset. After listening to the two-tone, work of the participant is to discriminate which has higher ground, then press a button accordingly. My question is in relation to the buttons... It is my understanding that the buttons can be:
(1) software buttons that are displayed on a touch screen computer.
(2) physical buttons on a separate reply box which is connected to a serial port on a PC, or
(3) physical buttons on a separate reply box which is connected to a material OR (an e/s of control map, perhaps!?)
For some reason, he is I think understand that by using the internal clock of a PC is not reliable, due to the nature of multi - load Windows System. In other words, either by using a touch screen or a serial port on a PC is not a good idea; because if I do this, I use the internal clock of my computer, which can be interrupted by other programs running simultaneously on Windows System. In other words, the multitasking nature of Windows of the system will be inaccurate and unpredictable reaction time. It is also my understanding that, if I want a good accuracy reaction time (for example, down to words maybe 1 or 5 msec!?), I would need to use a separate clock which is designated only for this task. Once again, I'm stretching and trying to accomplish a task that is new to me, and I don't know if I'm not mistaken...
I currently have several cards to control IO OR in my lab. They are the USB - 6216 BNC, PCI-6221 (with a block of connection BNC-2090), data acquisition 6062E WLS-9215 BNC and DAQ wireless. For the purpose of this new task, I think more on the use of the USB-6216 BNC or PCI-6221, if any at all. NOR sells any push button and related devices? So, I can use the clock inside a card of control of e/s? Or I have to buy a new set of devices?
If someone could advise me on what configuraitons or options would work best for me this task, I'd be very happy.
Sincerely,
Fuh
-
Trying to create a push-button locking with digital inputs
Hello world
I am writing a program to control a motor with 3 push buttons, upwards, downwards and stop. I want the top button to lock when pushed and delatch when the stop or down are pushed. I tried the example program Latch.vi REARMABLE of this Web site, but no luck. It seems that out of the gate AND is indeterminate. I have attached to my program, any help would be great! Thank you
Use Index Array to get the desired Boolean value of the table. If you do the wiring one index, it will give you element 0. With this, you can have all the switches wired to different pins of the same registry on your DAQ hardware. Then, you can read a byte and unravel what bit does what. You will also need to build Boolean individuale in a table before you write in the acquisition of data. Here's a quick example:
You must decide which games to buttons that bit. I have not yet checked your lock algorithm logic.
-
I pushed buttons and now the screen one tinted sepia?
original title: I pushed buttons and now it's all one tinted sepia?
Hi, I was at my computer, typing, and I was trying to hold down the left button. I tried to type a letter near the shift on this side bar and I pushed buttons, and then it turned a sepia tint. I don't know what I pushed, I could have pushed the CTRL ALT FN or the WINDOWS KEY, but I'm not sure. I can't get the color back, but the computer works fine. Thank you.
I would just add,
No doubt, you can access your graphics card,
Right-click on your desktop and select properties of the graph,
Most of the sections have Restore / restore the default values listed.
I would color enhancement would be a good place to start.
-
Sort records by using a push button
Hello
I am new to oracle forms and I need help on how to sort the records using a button element.
I have two blocks, let say BLOCK a (main block) and BLOCK B (detail). I have a default order by clause, say order by colonne_1 of b block.
The question is, if I have two columns in block b (colonne_1 and column_2), how can I sort the records into column_2 by using a push button item?
Thank you and best regards,
DaveHello
Have you tried my solution? He made exactly according to your requirement.
The EXECUTE_QUERY in the solution above required because you need to sort the records in another column. So, after setting the command records another column and show in this order, you must run the query again.
Arun-
-
Automatically run a push button
Hello
Is it possible to manually run a push button? The reason why I didn't just call the procedure directly is because it has a go_block and when I put it on post_query to the level of the form, it gives me the error illegal restricted procedure CLEAR_BLOCK in the POST_QUERRY triggering.
I need a control block to fill when the new instance of the form I fill command block when the trigger Key_down, trigger Key_up, Key_prvrec and key_nxtrec are together on the specific control block.
code snippit on above triggers is as follows
If: system.current_block = "four" then
go_block ('four_two');
populate_avail_activity;
go_block ('four_control');
NEXT_RECORD;
on the other
NEXT_RECORD;
end if;
the code of procedure populate_avail_activity snippit
declare
cursor xxxxx <-important to know;
cursor2 xxxx <-important to know;
BEGIN
clear_block (no_validate);
FOR activity_rec IN activity_cur LOOP
: four_two.activity: = activity_rec.activity;
next_record;
END LOOP;
PREMIER_ENREGISTREMENT;
exception when others then
for new_activity_rec loop new_activity_cur
: four_two.activity: = new_activity_rec.activity;
end loop;
END;
a work-around, I has a push button that simply calls populate_avail_activity pressed, it works... now for only manually, tap it to them would be ideal.
Any suggestions please
Forms [32 bit] Version 10.1.2.3.0 (Production)
Published by: DM on September 3, 2009 11:36This will help
Re: Trigger WHEN BUTTON a button can be run from a procedure
-
Update the Table with the push button
Hi I want to update my table using the push button that requires a transfer of account
For example a single account transactions into 2nd account
I used this query, but his does not work
Update of cb
Set cb_acc_id =: block3.acc_id_target
where
cb_acc_id =: block3.acc_id_source;
Concerning
Wasim IsmailYou may forgot to validate your update...
BTW:
your form will not recognize, you start a transaction and make an update in the database. -
I have the following: 1 x OR-3110RT talk to 3 remote computers via TCP/IP. All 3 screens use the exact code. I use variable part to transfer information back and forth. However, I have to start and stop command on all 3 screens. If I push the Start button on the computer 1, the button changes state graphically and sends the command to my system startup. It will be shown that pushed on the screen, but not on 2 other computers. How can I solve this problem? Y at - it a return variable, that I can use to show a change of State on 2 other computers.
Thanks for any help
Hi Tommys99,
You can use a property node to update the value of a control running.
Right-click on the control in the schema and select Create-->--> the value property node. You can then wire the output of the network shared Variable in this update the control on secondary computers.
N
-
Table of indexing with a push button
Hello
I'm doing a round table where the size of the array is 5. I'm looking for entries if we can do the same thing with them using a whole loop and the timer, but with a push of a button. Attached is the code I'm working with.
Thank you.
I used a structure of the event. Also, I replaced the structure of your business with the Quotient and the rest VI.
-
NiDAQmx DAQ-start push button panel
With LabWindows/CVI, I have a program that implements a NiDAQmx task (set up by MAX) in a dll and then can start to this task (via the call of data acquisition) of one of the two panels. The task is set up to collect samples of N of a trigger, and when all samples n (1000, in this case) gathered a callback routine is called to handle the data. When I start the task of a Panel, data acquisition works perfectly; When I go on the other, the data manager routine is called ever, although there is no error or warning. Both places will eventually call the exact same routines to start and stop the data acquisition task.
The only difference I see is that the first routine calls DAQ-beginning of the recall panel Panel control (called when you push the button START) and immediately leaves the callback routine. In the second Panel, I would like to do a certain amount of treatment after acquired it data, routine reminder calls a routine to "Begin the Acquisition", which starts the task of data acquisition and then goes in a loop waiting for the data to be acquired - than never, of course, given that the data manager callback is never called by the task NiDAQmx.
The fact that the second routine never gets out of the callback button routine could be playing the NiDAQmx task?
Hi pblase,
I found a somewhat similar situation discussed in this thread: http://forums.ni.com/t5/LabWindows-CVI/Processing-different-pending-events-in-a-DAQ-callback/td-p/10.... It seems that that callback routine may block your task reminder DAQmx since fires. If you goal is just wait that post-processing was done, you will be able to implement an indicator to allow the waiting and the return of the callback routine so that you can wait for the task to finish in the main program.
Maybe you are looking for
-
How to enable virtualization on satellite Pro U200
Hi, I have satelite pro with processor Intel (r) Core (TM) 2 CPU T5600. I'm 100% sure, the virtualization.So the question is: is there (or why not) is it possible to enable virtualization in the bios? I need to run 64 b under vmware server operating
-
iOS9.3 failed verification because you are no longer connected to the internet
I try to install iOS9.3 but the phone says I am not connected to the internet. My internet and wifi is on and running, what should I do?
-
Updated for Windows 10 online and now DVD player does not recognize nor activate to play DVDs with HP Media Player. Given message that MSVCP71.dll is missing and must be reinstalled. Can you guide me through this process?
-
Need controller bus SM HP e020dx Windows 7 (not windows 8)
I went down to Win 8 to win 7, but this is the latest driver to install. Help, please! This is my 4th day of playing with this little beast. In the technology of the machine, it shows just "controller of Bus SM" as not installed. I clicked it and he
-
construction of database?
How to build a database that displays all the names of the motivational speakers I want to put in my app and their places and dates seminar jointly with the world map I want too in my application?