Spry HTML Panel Widget breeze ice

Similar Questions

• How to insert HTML custom in tabbed panels Widget

  I need to insert HTML in a tab panel Widget.

  I have an HTML table with the data that I have to put in a tab panel Widget.

  I tried to create the custom HTML and dragging it in the area of the tabs Panel that did not work.
  I tried the content area of the Panel tabs, then click to insert custom HTML that has not worked.

  And now, I'm of ideas on how to achieve this.

  Thanks in advance

  Ho!

  So I thought about it for me.

  If you are wanting to insert HTML custom in a tab panel, make sure that you have selected an object in the content area of the Panel tabs. Then select Insert HTML code.

  I have just placed a text box in the tabs Panel, selected the text box so that it is highlighted and then chose to insert custom HTML.

  This put my HTML custom code in the content area of Panel tabs.

• HTML shows on all panels in tabbed panels widget

  I'm trying to insert HTML in a specific panel on a tabbed panels widget, I have set up.  I have done this before, but now whenever I try, the HTML code displayed on each Panel instead of the one specific one I selected.  Note, I was able to achieve previously with ease.  Here is a sample of the HTML, I'm trying to use, and has been able to use successfully on a separate tab with a name different iframe.

  "< iframe name ="iframe2' src = message.html "width ="500"height ="300"> < / iframe >

  Strange!, please publish the site as a place for Business Catalyst trial and give us the link.

  If the content is different for each tab, then they should not show same content unless the code inserted is not correct.

  Thank you

  Sanjit

• Default Spry Accordion Panel

  CONTEXT: I inserted a Spry Accordion with six different panels. Each Panel has its own set of links. Each link corresponds to a page in a long series of linked pages which together form a single document. Each panel of links represents a contiguous set of linked pages and a section of the document. In addition, I created a model for the entire document which includes the Spry Accordion just described.
  
  GOAL: create an editable region in the template that will allow me to control the default Panel for each page of the document.
  
  FAILURE of ATTEMPT: documentation Adobe to set the default for the Spry Accordion Panel suggests the following JavaScpript:
  
  < script type = "text/javascript" >
  var acc8 = new Spry.Widget.Accordion ("Accordion8", {defaultPanel: [someNumber]});
  < /script >
  
  where someNumber is an integer that is greater or equal to zero. When this code is entered into the model error.
  
  DISCUSSION: continued research in the JavaScript file that controls the accordion, I was able to find the function that controls the default Panel. It appears like this:
  
  Spry.Widget.Accordion = function (element, opts)
  {
  This.Element = this.getElement (element);
  this.defaultPanel = 0;
  this.hoverClass = "AccordionPanelTabHover";
  this.openClass = "AccordionPanelOpen";
  this.closedClass = "AccordionPanelClosed";
  this.focusedClass = "AccordionFocused;
  this.enableAnimation = true;
  this.enableKeyboardNavigation = true;
  this.currentPanel = null;
  This.Animator = null;
  this.hasFocus = null;
  This.Duration = 500;
  
  this.previousPanelKeyCode = Spry.Widget.Accordion.KEY_UP;
  this.nextPanelKeyCode = Spry.Widget.Accordion.KEY_DOWN;
  
  this.useFixedPanelHeights = true;
  this.fixedPanelHeight = 0;
  
  Spry.Widget.Accordion.setOptions (, opts, true);
  
  Unfortunately, some browsers like Safari, style sheets in our
  page depends may not have been loaded at the time, we are called.
  This means that we must postpone attaching our behavior until after the
  OnLoad event is triggered, because some of our behaviors are based on dimensions
  specified in the CSS.
  
  If (Spry.Widget.Accordion.onloadDidFire)
  this.attachBehaviors ();
  on the other
  Spry.Widget.Accordion.loadQueue.push (this);
  };
  
  QUESTION: How can I access this feature of in my template to change the setting for this.defaultPanel?

  Quote:
  The main JavaScript file for the accordion can be controlled by a
  model, since he lives in a separate .js file.

  I do not use templates myself, but it looks like the correct way to approach
  the problem is the one used on your 'ATTEMPT failed. You can try it
  again and report message the exact error you get and at what stage. Maybe
  you get help on that.

  EXPRESSION OF GRATITUDE
  Thank you for your encouragement. Indeed, part of the solution to my problem was discovered through a reconsideration of my attempt failed. The other part came from the information provided me while helping another person with a related, but different problem. It turns out that the line of code in my failed ATTEMPT is automatically placed in the model when the SPRY accordion is inserted. Unaware of his presence and the right place I am he entered by mistake a second time. This triggers not only an error message, but it renders unusable, various other parts of my document.

  THE SOLUTION
  First step: find the line of code that is similar to that given by the following text:
  
  In my model, this code was found at the bottom of the HTML body tag.

  Second step: understand that the name of the variable 'acc8' and the name of the "Accordion8" parameter provided in the sample code above are arbitrary, and that the two are automatically defined when then a SPRY accordion is inserted. Important is that these names are likely to be different from what you see in the sample code above, and that you need and probably should not edit them in your document.

  Step 3: change the number in the name pair: value indicated as defaultPanel:2 to a number between 0 and one less than the number of panels that you create in your accordion. It is this number that allows you to determine the Panel that appears when the document is opened.

  Step four: Save and test in your favorite browser. Enjoy!

  CAUTION:
  This experience taught me a crucial lesson on the use of Dreamweaver. Dreamweaver has a mind of its own and can easily ruin you in seeking to correct your own mistakes for you. The solution is to save your document with a second copy before attempting any innovation that is not already integrated in the Dreamweaver program.

  FURTHER EXAMINATION:
  As I created a template to use with other documents, I will now try to make this area of my template editable, so that I can change the default setting of every other page that I create from my template. As I still do this, understand that the steps above, even if it is valid for a document template, may or may not be valid for pages created from the template. I hope they are and it will keep experimenting.

• How to use a Spry Collapsible Panel in a page attached to a model?

  I can create collapsible panels in a page that is not connected to a model, but if I try to add to a page related to a model, a message tells me either unlock the cephalic region in the model (I don't want to do this because I have a spry menu in the head) or add the widget to the model. But I can't add the widget to the editable area of the model, and I don't want on each page.

  I've done this before and don't remember having this problem.

  Thanks for any help.

  Jennifer

  You will need working with the code.  Open Template.dwt

  Insert a Widget.

  Select the code of the widget panel in yourtag and Ctrl + X to cut

  Then open your child page and Ctrl + V to paste.

  Save the model and fill changes to the pages of the child so that the Spry support files can be added to all.

  Save child page with the pasted Panel Widget.

  Download all pages of the child to the server.

  Nancy O.

• link to a nested spry Accordion Panel

  Hello

  I would appreciate your help with this problem:

  I am building a structure with a nested accordion and spry tabs Panel: http://www.ikf.ac.at/neu/projekte_direktlinks.html

  Now, I want to link to specific panels (sub-) in the structure. I know that this is usually done using spryurlutils.js, that allows to connect to a specific panel by adding a query string and fragment identifier in the url. For example, I would like to add? tab = 1 to reach the second panel tabs or? tab = 1 & Panel = 2 to reach the second panel tabs and the third panel accordion-, or so I thought...

  Here's the problem: since I can't make the distinction between "parent panels" and "nested" in the URL wrong (nested) panels is open. A link to http://www.ikf.ac.at/neu/projekte_direktlinks.html?tab=1 & panel = 2 opens the appropriate parent (#3) Panel, but also opens a secondary (#3), which I will not be opened. Is there a way to distinguish between the panels and the panels nested in the URL?

  I would be very grateful for any help. Please keep things simple, as I am not an expert

  Best

  Lukas

  Copy and paste the code that I provided above in a new document called junk.html and view in your favorite browser. The default value is tabbedpanels tab = 0, master accordion = 0 and sub Panel accordion = 0.

  To open the second tab, first second secondary master our url looks like

  Junk.html? Tab = 1 & Panel = 0 & subpanel = 1

  This will show you the content 2.1.2 (second tab, first master, second secondary)

  GRAMPS

• Spry experiments Panel tabs and master/detail Page Set

  Hello

  I created a feedback form and uses a Spry tabs Panel to allow users to review the answers to a question and then answers the question in different tabs, there are 6 tabs at all. In every tab I have created a Master / Detail Page set - well actually just the master appears in the tab. It works very well. I'm up to 20 answers to appear on every page, after which the user selects first/previous/next/last. When they do the screen refreshes and the tabs panel display goes back to the tab by default, clicking on the previously used tab correctly displays according to of first/previous/next/last selected user. I would like that the display to stay on the user's current tab when they select the first/previous/next/last.

  The page in question is here http://www.hollisterairshow.com/feedback-results2.php, then scroll to halfway to the bottom of the page.

  Thank you.

  Tony

  Hi Tony,.

  Take a look here http://labs.adobe.com/technologies/spry/samples/data_region/PagingSample.html and here http://labs.adobe.com/technologies/spry/samples/data_region/SpryPagedViewSample.html

  If you need help, go to the Spry Forum http://forums.adobe.com/community/labs/spry

  I hope this helps.

  Ben

• Spry Tabbeed panels

  Hello

  I'm only a user from the outside, so I don't no know almost nothing about the codes.

  I used a Spry tabs Panel and customize it to a 'page '. But when I tried to customize it to another "page", one has changed too.

  And now I have the latest changes to both pages.

  Can someone tell me, please:

  1. how to bring back the pannel of Spry tabs deafult (so I can start all over again)

  2. how to customize and then save the changes for each panel separately. Is this possible at all?

  Thank you. I hope that I was clear :-)

  Paris cordially, Natasa

  Hi Natasa,

  you need to separate the commands of pure DW of your Spry tabbed panels in files like these:

  
  

  Then I'll give you a recipe for David_Powers (http://forums.adobe.com/message/2538973#2538973how) use of includes. I can only say try, it's paid, although only at a first glance, it seems very complicated.

  Use server-side includes is similar to working with a puzzle. When everything fits together, it must create a single object. There should be nothing left above. In other words, you cannot use a full web page as an inclusion. It must be that a part of a page - the missing piece of the puzzle, somehow.

  The other point on the side Server includes is that internal links no longer work if you use the links to the document. You must change the links in the include file use the site-relative links to the root.

  How to convert a Spry menu bar into an include server-side is the following:

  1. Make sure that you are in Code view. If you are in Design view, Dreamweaver automatically deletes the important code that must be preserved.
  2. Click anywhere in the menu in Code view, and then select (the name may be slightly different) in the tag at the bottom of the Document window picker.
  3. Press Ctrl + X / Cmd + X to cut the menu in your Clipboard.
  4. Dreamweaver will probably warn you about a missing widget and ask if you want to remove the code. You must click on no.
  5. Create a new page. Open it in Code view and delete ALL of the code. The page must be completely blank.
  6. Paste your Clipboard menu in the white page in Code view.
  7. Return to the original page where you cut the menu.
  8. Defiler, scroll to the bottom of the page, select the following code, cut it to the Clipboard and paste it under the menu code into the include file:
  1. In the include file, change all the links to the root site. For example, replace
  2. Include the menu, the use of quotation marks around the file name, for example, .
  3. Make sure that each page has links in the SpryAssets/SpryMenuBar.js and SpryAssets/SpryMenuBarHorizontal.css head.
  4. If the existing pages have the script in point 8 above, delete it. The menu uses the script in the include file.

  Hans G.

• A custom HTML Panel can fill fields of live text templates?

  Is it possible a custom HTML Panel fill in the live text templates?

  No, but a panel can send ExtendScript to AE and edit content of text in a type layer.

• First 10.3: Debugging JavaScript in HTML Panel crashes

  Since the upgrade to 10.3 first, we noticed that when you debug with breakpoints in JavaScript HTML panels, when execution reaches the breakpoint, the panel all crashes and recharging.

  We did not have this problem the same panel JavaScript code in the first 9.2 debugging.

  This problem seems to occur on the same lines of script, some other lines of script never make the Panel crash.

  All the tested script lines were simple browser JS, no involved NodeJS.

  I tried the upgrade in my version of the ExtensionManifest element manifest.xml and 5.0 to 6.0 RequiredRuntime element, but nothing helped.

  I've not heard or seen such a problem. Please send me your Panel and tell me where to put breakpoints to see the falls.

• Record. HTML Panel Extension JSON file

  I develop an extension that creates a range of data as a javascript object. I want to allow the user to click on a 'save' button, navigate to a directory (optional) and save the json file that is created in the HTML session. I tried a download link (similar to what I would do in a web page), but that does not save the file. Is there an effective way for a user to save xml, json, or txt to an HTML Panel data?

  Well, I have a working version using jsx:

  function saveJSON (txt)

  {

  txt = JSON.stringify (txt)

  var Name = app.activeDocument.name.replace (/ \.) [ ^\.] +$/, '');

  var Path = app.activeDocument.path;

  var saveFile = file (path + "/" + Name + ".json");

  If (SaveFile.Exists)

  saveFile.remove ();

  saveFile.encoding = 'UTF8 ';

  saveFile.open ("e", "TEXT", "?");

  saveFile.writeln (txt);

  saveFile.close ();

  }

  Refer to this post for is JSON.stringify on JSX: HTML panels advice: #5 passage of JSX to HTML objects. Photoshop, etc

• Tabbed Panels widget

  Hello.

  How can I add multiple tabs for the default tabbed panel widget...

  Basically, using the "bootstrap" structure, I added a tabbed panel widget that has a default 3, however an is a 'drop-down Menu"style that I delete.

  Leaving me with only 2 tabs.

  How can I add more.

  Thank you in advance.

  Glen Gibbs

  You will have to switch to Code view and change some coding. Take a look at what follows is what you get when you include the standard tabs widget. Then remove the red color elements, they belong to the tab from the drop-down list.

  • Tab 1
  • Tab 2
  • Drop down tab 3

    • List drop-down link 1
    • List drop-down link 2

  Content in the tab of the Panel 1

  Content 2

  Content drop-down list #1

  Content drop-down list #2

  This leaves us with

  • Tab 1
  • Tab 2

  Content in the tab of the Panel 1

  Content 2

  Copy the 2 remaining Tabs, color green and past them immediately under the copied lines. Do the same with content, blue color. This will result in the following code. Remove the red color code and change the orange color code while they in the same sequence as the original code.

  • Tab 1
  • Tab 2
  • Tab 1
  • Tab 2

  Content in the tab of the Panel 1

  Content 2

  Content in the tab of the Panel 1

  Content 2

  Your code over for the four legs will look like

  • Tab 1
  • Tab 2

• Tab 3
• Tab 4

Content in the tab of the Panel 1

Content 2

Content on the dashboard 3 tab

4 content

• I used a Muse Panel widget and it looks totally different in inbrowserediting... so really can't do anything.

  I built a website in Muse on Mac and used a Panel widget on the home page. The site is up to www.tricountyagpros.com and seems ok, not exactly as Muse, as he added a blank space under each color box. When I go to inbrowerediting, the Panel widget is totally off.

  Someone can tell me how to fix this Panel widget or do they not work?

  Thank you

  Benjamin K

  Follow please: Panel tabs in inbrowserediting widgets do not work!

  (Double Post)

• How to customize the tabs in tabbed panels widget... ?

  I have four tabs in a tab panel widget and I want the color of the active tabs are different. For example: when the tab it is active, it is blue, when two tab is active, it is red, tab in Active mode three is yellow - and so on...

  Is this possible? And if yes: how?

  It seems that if I change the 'active' color on a tab, it effects all tabs. I also tried to use an image on one of the tabs in the 'active' mode - and the image is apparently used for all other tabs.

  arneberg1

  You can do it by uncheck edit together in the Panel options. You can do it anytime, so you can standardize the text, for example, and then uncheck the box to change the colors of the tabs themselves.

  

  David

• Context menu for PS CC extension 2014 HTML Panel

  Hello

  Flyouts being supported by Flash panels. But after migrating to HTML5 Panel, I found that it does not flyouts. However, after the publication of the CC 2014 applications, I found in the documentation of CC 2014 Extension SDK, that engine CEP 5 supports a SetPanelFlyoutMenu() method. But I'm unable to call the method from the extension. It gives the error below:

  

  Looks like the method is not present in the CEP Engine_extensions API, although it is mentioned in the documentation for the SDK that the method should be there. Am I missing something here? Help kindly.

  Thanks in advance.
  

  Note: I upgraded to the extensions of target CC 2014 as mentioned in the blog below Hallgrímur Björnsson:

  Adobe Extension Builder and creative Cloud 2014

  Hello

  I added HTML panels advice: #14 Menu flying | Photoshop, etc with an extension of demo showing a menu drop down and its click handler (the full code is provided on my GitHub page, link in the post) - hope this helps!

  For what is backward compatibility yannick1976 inquired: PS CC CEP version 4 must - as I know CC-No-2014 does not get updated CEP. I can't tell you about 2014.0 and 20141 well... Best way is to check the demo extension on them ;-)

  See you soon,.

  Davide Barranca

  ---

  www.davidebarranca.com

  www.cs-extensions.com