SQL * call command line loader with spaces in the path

Similar Questions

• Using a command line with spaces in the path name

  I want to write a batch file simple to keep the output of the log file in a program, I'm running. Unfortunately, I him did not over the years and I'm rusty I thought.

  Basically, the CW program creates a file called "log.txt".

  What I would do is to remove a file called log10.txt and the iteratively to rename log9, txt connect 10.txt, log 8. txt log9 txt... and so on.

  Once the name change is made, I would like to run CW.txt.

  Some complications. There is a version of the program the two 32 - bit and 64 - bit and only can exist.

  So I thought I could use the system environment PROCESSOR_ARCHITECTURE VCBBASE to test if I am running 64 bit.

  Then I could use ProgramFiles or % ProgramFiles (x 86) % to locate my executable.

  Sounds easy in theory, but I'm stumbling - a lot.

  I use cmd to open a window to test my script of commands and the batch script is in a file called "testme.cmd." I don't know if it would make a difference if the batch file has been "testme.bat"?

  The full name of the directory for the 64 bit version of the program is:

  C:\Program Files\KingComp\Cram 3\CW.exe Wiz

  You try to run a batch file to determine if the file exists:

  If exist %ProgramFiles%\KingComp\Cram Wiz 3\CW.exe

  causes an error: the system cannot find the path specified. I tried various combinations of the quotes around parts or all of the order - all without success. The research gives a lot of results, but none seem to apply to my problem except suggestions to determine the 8.3 file name and use it. But I do not know how to find by program structures of 8.3 directory.

  Is it possible to use the Windows 7 environment variables and a path name that contains spaces and get a positive result?

  Thank you.

  I'm also not sure exactly what shell or the shell I use. As far as I know is not BACK, Dorothy. :)

  Hi Mike,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Community. It is better suited for the IT Pro TechNet public.  Please post your question using the link below.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproappcompat&filter=AllTypes&sort=lastpostdesc

  I hope this helps.

• WIN8 scheduled task does not work with spaces in the path of the program

  Hello, I walked with this problem. I created a basic task using the Task Scheduler, and I noticed if the program you want the task to run, it's the path contains white space, it will not work.

  Does anyone know how to solve?

  I tried with this http://support.microsoft.com/kb/823093/en-us, but could not make it work.

  Thank you.

  I had the same problem http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/scheduled-tasks-don ' t-run-pops-up-how-do-you-want/14e9f209-09b7-46a9-8739-ba821b565e1b?tm=1430262836762 with a task "alarm" working if the file name has spaces. I renamed the file, but win8.1 must be able to handle spaces in the directory/file names. I think it's a bug.

• CS3 files with spaces in the name

  I have a slight problem with the files that are in folders that have spaces in the name of the folder.

  For example, the file is in the following location: rtu 41%.psd/c/n Hold/Test Image file/mondeo

  If I run the script, it creates a folder called ScriptFolder to the location of the file and a saveAs psd files in that folder but I get an error.

  General Photoshop error occurred. This feature can pas...ld\...\mondeo n 41% ' because the file is not found.

  If I change ' folder of images to test ' to 'Test_Image_Folder', which is where the file is the script works.

  Here's the script of any suggestions on how I can get around this?

  var myPsDoc = app.activeDocument;
  var justname = myPsDoc.name.split ('.) ») [0]
  var MonNouveauDossier = new Folder(myPsDoc.path+"/ScriptFolder/"); "
  If {(myNewFolder.exists)
  } else {}
  myNewFolder.create ();
  }
  newFile = new file (MonNouveauDossier + "/" + justname)
  photoshopSaveOptions = new PhotoshopSaveOptions()
  photoshopSaveOptions.embedColorProfile = false
  myPsDoc.saveAs (newFile, PhotoshopSaveOptions, true, Extension.LOWERCASE)

  With the help of decodeURI should take care of the problem with spaces in the path.

  var MonNouveauDossier = new folder (decodeURI (myPsDoc.path) + "/ScriptFolder/");

• How to specify the instance in SQL * more command line?

  Hello
  
  I'm learning to Oracle. I currently have 2 instances of database running. I wanted to connect to one of the bodies and used the following command from the command line:
  

  sqlplus system as sysdba/abc123@ocp11gsid
  
  where 1234 is the password for the system user in the ocp11gsys instance.

  When I run the command above, SQL * more ask me the password. I do not understand why he asks me the password because I provided on the command line.
  
  What is the correct command line, so he asks me the password? (without defining the variable ORACLE_SID of environment - basically, I want to know how to specify the user, his password and sid, all in the sqlplus command line, without being prompted to enter the password that I mentioned.)
  
  Thank you for your help,
  
  John.

  John,

  This is how it works.

  E:\Documents and Settings\aristadba>sqlplus system/oracle as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 22:49:25 2010
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>
  

  And now it ask the password,

  E:\Documents and Settings\aristadba>sqlplus system as sysdba/oracle
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 22:50:42 2010
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Enter password:
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>
  

  Spot the difference?

  The user name and password must unite. What you are to provide the password with the role where it will not be considered.

  Update
  I missed that part,

  What is the correct command line, so he asks me the password? (without defining the variable ORACLE_SID of environment - basically, I want to know how to specify the user, his password and sid, all in the sqlplus command line, without being prompted to enter the password that I mentioned.)

  The only thing that you can specify is the user name and password. The SID must be defined by you, either explicitly using the export or oraenv command if you are on the local system and do not use the TNS to connect to the instance. If you use the TNS, then an appropriate entry should be there which would connect to the required database.

  HTH
  Aman...

  Published by: Aman... on August 2, 2010 22:54

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• FTP access with spaces in the names of dir

  Hello

  I'm doing a recursive list of files in an FTP directory.

  Although FileZilla deals with spaces in the names of directory without problem, it seems that Labview struggles a little.

  In effect, if I ask labview for files and a folder named directory, for example/Projects/Camera 1 /, it returns an empty array (while FileZilla sees clearly 12 files in that folder). It seems that the problem is white in the name space, because if I replace (using FileZilla) the space character by '_', LV correctly gives me the list of files.

  No idea how the LabView FTP working properly deal with spaces in the directory and file names?

  Best regards

  perper2001

  Hello

  Unfortunately, I can't share the code, but here's a screenshot of what it looks like.  It is based on the "vi directory listing" which comes with labview.

  

  Basically, it send the command MLSD and wait for an answer. After that, it's a matter of parsing of the response from the server that my FTP looks like this:

  type = CDIR; sizd = 3; change = 20150220090455; UNIX.mode = 0705; UNIX.uid = 32210; UNIX.gid = 100; single is d8g863beb0;.
  
  type = IRDP; sizd = 5; change = 20150302165245; UNIX.mode = 0705; UNIX.uid = 32210; UNIX.gid = 100, unique = d8g863beae;...
  
  type = dir; sizd = 12; Change = 20150302000236; UNIX.mode = 0705; UNIX.uid = 32210; UNIX.gid = 100, unique = d8g863beb2; Battery camera 9

  Kind regards

  Peper

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• SQL * more command line

  Hello, is there a way to run a SQL directly from the sqlplus command line? For example:
  
  sqlplus usr1/usr1@srv1 select sysdate double
  
  Thank you
  
  ~ David

  Another way in Windows:

  c:\>echo select * from dual; | sqlplus scott/tiger@test_db
  
  SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 25 14:41:17 2009
  
  Copyright (c) 1982, 2006, Oracle.  All Rights Reserved.
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  SQL>
  D
  -
  X
  
  SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  c:\>
  

• How to create a table with spaces between the lines...

  Hello
  
  I use jdev 11.1.1.6 and I need to insert spaces between the lines. How this can be done?
  
  Thank you and best regards,
  Tarun Agrawal

  Hello

  I'm sorry to forget on the spacer. You must use css like mentioned AP.

  Arun-

• command-line comparison tool to compare the schemas of the db?

  We would like to have the rest of the process where we have A server with an existing database with all tables (say there db version of Figure 3). We want to do the following
  1 export all the information about the tables, columns, constraints, sequences from a file or something
  2 blow the database
  3 re-create the database
  4. have you Hibernate running with create and it will create all tables and constraints and sequences
  5. export all the information of this new scheme (version 4) to another file or something
  6. compare steps 1 and 5.
  
  Can what tools I use to do step 1, 5 and 6? It's all automated, so I need some command line tools. How can I do this? I'm quite new to oracle and new on schema comparison as well.
  
  Thank you
  Dean

  You don't mention a version of Oracle, so I'll assume something relatively new, 10.2 or 11.1.

  An option that would be relatively simple to automate would be to use the DBMS_METADATA package to generate the DDL for each object in the schema (I assume that you're not really blow away the entire base Oracle, just the particular schema where you deploy your application tables). SQL * more script that covered objects in the schema, calling DBMS_METADATA, queue the results to a flat file would be all that is necessary. Assuming that you do this before and after reconstruction, you should be able to use your favorite diff command line tool to generate the differences between the two.

  Another option would be to simply save the data in the data dictionary (e.g., USER_CONSTRAINTS USER_TABLES USER_INDEXES, USER_TAB_COLS, USER_CONSTRAINTS, etc.) and compare it to the actual data dictionary after the reconstruction (ignoring statistics columns that are supposed to change).

  Oracle has also a pack of change management (additional cost) which has an interface SQL that you could probably use. But I'm guessing that this is not what you are looking for.

  Justin

• White lines fixed with optimization of the art - is - it possible to copy with this setting?

  I have seen discussions on the white lines, you get on the edges of the objects due to anti-aliasing in Illustrator, and I found that when exporting, you can remove them by setting 'optimized art' in one of the options there.

  For those who do not know the issue of the white line:

  Sometimes, when the Illustrator blend the pixels around an object, it puts a thin white line around it that always appears 1 thick px any zoom level.

  Not really there and when it printed disappears. Trouble is, even when you export the document, or a copy of objects in other software for the use of the screen, it's still there.

  Many people think that white line is a tiny space, but it is not.

  People also tend to tell you that it is because you have two objects butted against another. Also, this is not true. The white line persists even on overlapping forms.

  People will also say it is when two shapes on top of the other follow the same path. Yet once, is not true. White lines appear even when you have only 1 object following a particular path.

  My problem is that I rarely export an entire document at once, but tend to copy items to it in Photoshop. When I do, the white lines traveling with her and becomes permanent. Even on a .jpg, .png, or .gif image file, the lines are still visible.

  What I want to know is, is it possible to copy objects in Illustrator using optimization of art?

  Or y at - it another way to copy them without taking these white lines with me?

  I know that I can get rid of them by turning anti-aliasing off the coast, but everything really looks pixelated, so it is not much better.

  In addition, anti-aliasing is not actually solve the problem, it just hides it. Even with the power off, when I copy the affected objects to Photoshop, the white lines reappear in Photoshop.

  And please don't bother the answer for me, explaining what the white lines are, or how to get rid of them or how to lose them in the export. I know all that.

  Notes:

  I'm under Illustrator CS6

  And Photoshop CS6

  Helmer,

  I wonder if this may be useful, or is simply ridiculous. I apologize if this last.

  If you can use a Raster object to copy into Photoshop, you try to use the object > rasterize and set Anti-Aliasing for Art Optimized, can see.

• Developer SQL 3.2.20 always invites to indicate the path full java.exe

  I installed SQL Developer 3.2.9 to 3.2.20 on my Windows 7 64-bit system. I've updated just like I did earlier. It is "installed" in C:\Program Files (x 86) \sqldeveloper and down there, I have a folder for each version that I installed. sqldeveloper_3.1.07.24, sqldeveloper_3.2.09.30 and now sqldeveloper_3.2.20.09.87.
  
  Now the 3.2.20 new version asks me to enter the path to java.exe whenever I start it. I think that the previous version did this, but only once. This new version does not seem to remember when I choose the path to the java.exe that I use.
  
  Any thoughts on how I can do Developer SQL do not forget where my java.exe?

  Open the sqldeveloper/bin directory who settle.

  Edit the sqldeveloper.conf file and specify the path.

  Save the file.

  Behavior indicates that the SQL Developer is not able to write to this file...

• There is little space between the paths, please help me solve this problem

  Hello everyone, I have little doubt on the trail. I have this problem every time, I searched and found no answer.

  There is little space between the two tracks of different colors. There are image below to show the more open problem.

  Thanks for help.

  

  sscayir,

  It seems that the artifact/Anti-Aliasing screen problem so often discussed here.

  You can get rid of it by uncheck work of Anti-Aliasing in Edit > Preferences > General, see more of pixelation on screen, but you will probably find that the artifact remains the same size when you zoom in and that he will not appear in the PDF files, print, and images raster created by export or save for Web. and again, it can be a real problem.

  Who is this?

• Widget: reading of the call command line parameters

  Hello

  I use a Blackberry Web plug-in for Eclipse Version: 2.5.0.201009142140 - 15.

  I try to call a widget from a Java Application, passing a parameter to the main html page.

  My config.xml file has the following line

  In the Java application, I try to call:

  String param = "TestParam"String url = "TestObjJava?param=" + param;
  ApplicationManager appmanager = ApplicationManager.getApplicationManager();
  appmanager.launchApplication(url);
  

  This launches the application, but params are lost, in the widget the window.location.href has followind value:

  http://external_server/index.html
  

  so I can't read the TestParam inside my Widget.

  Is possible to read parameters invoke from within the javascript widget?

  It looks like your java code is the syntax of type of mismatch, should be:

  String url = "TestObjJava?" + param;
  
  

  or if have more than one params:

  String url = "TestObjJava?" + param1 + "&" + param2 + "&" + param3;
  
  

  See references:

  http://www.blackberry.com/developers/docs/4.7.0api/net/rim/device/api/system/ApplicationManager.html...
  or: http://www.blackberry.com/developers/docs/6.0.0api/net/rim/device/api/system/ApplicationManager.html...