SQL Fetch data recordset provides incomplete results

Similar Questions

• log in - help sql: error ORA-01489: string concatena result

  Here's a sql query and I am cooking a decoding, but since there are several columns invloved when I try to run it I get the following error:
  ORA-01489: result of concatenating string is too long
  
  Any kind of help is appreciated, I need to get it going or I'm dead :(
  
  Concerning
  Rahul
  
  
  
  SQL:
  Select sys_connect_by_path(c.decode_prep,'-') decode_prep
  from (select "DECODE (BIAPPS_11.'|)") substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1). «, » ||' RAHULKALRA.' | substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1) |', "1", "0")' decode_prep, rownum curr, prev rownum-1
  from (select rownum rn
  Double connect rownum < =.
  (select (length('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM')
  - length(replace('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM',',')))+1 total_cols
  the double)), (select ',' |') ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE ,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT SRC_EFF_FROM_DT , SRC_EFF_TO_DT, EFFECTIVE_FROM_DT, EFFECTIVE_TO_DT, DELETE_FLG, CURRENT_FLG, W_INSERT_DT, W_UPDATE_DT, DATASOURCE_NUM_ID, ETL_PROC_WID, INTEGRATION_ID, SET_ID, TENANT_ID, X_CUSTOM' | (',' double all_cols) b) c
  Start by curr = 1
  Connect prior curr = prev
  length (sys_connect_by_path(c.decode_prep,'-')) desc order
  
  ---------------------------------------------------------------------------------------------
  
  same as above sql only the difference is here I'm pulling the first record in the result set that top query returns:
  
  Select ltrim (replace(decode_prep,'-','||'),'| ') decode_prep
  of (sys_connect_by_path(c.decode_prep,'-') select decode_prep)
  from (select "DECODE (BIAPPS_11.'|)") substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1). «, » ||' RAHULKALRA.' | substr (b.all_cols, InStr(b.all_cols,',',1,a.RN) + 1, InStr(b.all_cols,',',1,a.RN+1)-InStr(b.all_cols,',',1,a.RN)-1) |', "1", "0")' decode_prep, rownum curr, prev rownum-1
  from (select rownum rn
  Double connect rownum < =.
  (select (length('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM')
  - length(replace('ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM ,CSCN_HIER1_CODE,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT ,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,DELETE_FLG,CURRENT_FLG,W_INSERT_DT,W_UPDATE_DT,DATASOURCE_NUM_ID,ETL_PROC_WID,INTEGRATION_ID,SET_ID,TENANT_ID,X_CUSTOM',',')))+1 total_cols
  the double)), (select ',' |') ROW_WID,COST_CENTER_NUM,COST_CENTER_NAME,COST_CENTER_DESC,CONTROL_AREA_NUM,CONTROL_AREA_NAME,CATEGORY_CODE,CATEGORY_NAME,CATEGORY_DESC,MANAGER_NAME,CURRENCY_CODE,CURRENCY_NAME,LANGUAGE_CODE,LANGUAGE_NAME,ST_ADDRESS1,ST_ADDRESS2,POST_OFFICE_BOX,CITY_NAME,STATE_CODE,STATE_NAME,REGION_CODE,REGION_NAME,COUNTRY_CODE,COUNTRY_NAME,POSTAL_CODE,PHONE_NUM,FAX_NUM,CSCN_HIER1_CODE ,CSCN_HIER1_NAME,CSCN_HIER2_CODE,CSCN_HIER2_NAME,CSCN_HIER3_CODE,CSCN_HIER3_NAME,CSCN_HIER4_CODE,CSCN_HIER4_NAME,CSCN_HIER5_CODE,CSCN_HIER5_NAME,CSCN_HIER6_CODE,CSCN_HIER6_NAME,ACTIVE_FLG,CREATED_BY_WID,CHANGED_BY_WID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT SRC_EFF_FROM_DT , SRC_EFF_TO_DT, EFFECTIVE_FROM_DT, EFFECTIVE_TO_DT, DELETE_FLG, CURRENT_FLG, W_INSERT_DT, W_UPDATE_DT, DATASOURCE_NUM_ID, ETL_PROC_WID, INTEGRATION_ID, SET_ID, TENANT_ID, X_CUSTOM' | (',' double all_cols) b) c
  Start by curr = 1
  Connect prior curr = prev
  length (sys_connect_by_path(c.decode_prep,'-')) desc order)
  where rownum = 1
  
  Published by: Mac_Freak_Rahul on November 28, 2012 01:31: in the first sql ')'
  removed after desc in the last line so now this query begin and will throw an error.

  Mac_Freak_Rahul wrote:
  @Blushadow:

  (1) first of all, I'm sorry for not posting my question according to the rules of the forum, next time I'll take care of that.
  (2) Secondly, thanks for the solution, I have no exp with clob, but I can take a deeper look later.
  (3) I just want to know if there are any other wayout, you mean the second concatenation of 4000 bytes sys_connect_by_path exhausts it might return this error?

  SYS_CONNECT_BY_PATH returns a VARCHAR2 data type. In SQL VARCHAR2 data type is limited to 4000 bytes, then Yes, you will get an error if the data that you generate is greater than 4000 bytes (and I say bytes rather than characters, because if your database uses a multibyte multi character set could be as little as 1000 characters)

  I'm right now stable for a table who got 62 columns... I have tables that have 200 close passes: (, great, if you can throw some light on this, if your the best way and the only one to achieve?)

  If you really need to concatenate strings together which exceeds 4000 bytes, then Yes you must use CLOB to store data. Oracle does not provide a native way to aggregate together in a CLOB datatype string, so why you need to write your own function.

  PS: just a quick overview of my value, it will be by comparing schema1.table (s) with shema2.table (s) where table_name must be the same...

  So why are you information concatenation together to achieve this goal?

• How to set sql server date has time format

  Dear Sir.

  I used the windows 7 operating system.

  I have work on scada software to explore siemens wincc.

  I develop the report based on sql server work.

  but the problem is when I put my system date in DDMMYYYY format, so my data was not stored in sql server.

  but when

  I put my system date in YYYYMMDD format, then my data stored in sql server.

  so, how to change the date format sql server.

  I am attaching screenshot (it is a red box, so this date format, I held DDMMYYYY)

  Please give solution.

  

  Abhijit Hello,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you have a question setting SQL server date time format. When you try to set the system date format id ddmmy, the data are not stored in SQL server on the system.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/search/en-us/TechNet?query=SQL%20server&beta=0&AC=4#refinementChanges=129&PageNumber=1&showMore=false

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• How to create Spatial indexes in SQL Developer Data Modeler 4

  Hello

  What is the procedure to create a Spatial index in SDDM v4? I found myself at an impasse because of the following problems:

  (1) retro-engineering rate the spatial index, then I need to add them manually.

  (2) adding an index does not allow me to check the 'spatial', and does not allow me to add the sdo_geometry column in the index definition.

  (3) for the registration of the spatial properties for a table, I can not choose the name of the Spatial Index.

  I came across an old post (Data Modeler - cannot create a spatial index), but this post is no longer valid because SDDM V4 does not allow me to create an index without columns (definition of the incomplete index).

  Help is appreciated,

  Kind regards

  Richard.

  Hi Richard,

  Thanks for your update.  I'm scared, I was assuming you were using the stand alone rather than SQL Developer Data Modeler.

  I tried using SQL Developer 4.1.0.18.37 (ai2) using a thin connection and got the ClassCastException you have found.

  But when I used ai2 autonomous, maker of data using the same login details 'Advanced', it worked OK and imported from the spatial index.

  (I'm puzzled as to why these two seem to behave differently, as this is the version ai2 data integrated with SQL Developer ai2 maker).

  I then plugged and reverse engineering the same tables (yet) in a new model.

  Funny is that there is no error in the external journal this time, but the spatial properties are still not retroconcues correctly.

  Is it possible that you have not set the option to import the spatial properties?  I expect that the spatial properties would be imported or that the error should be registered.

  SQL Developer ai2 imported properly the spatial properties and the spatial index, when I used a basic connection and specified host, port, and SID or Service name.

  Another issue: SQL Developer relies on a certain JDK / JDBC library?

  Any Java JDK 1.8 should be good.

  David

• ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  Hello!

  I have a simple object type and a proecdure in which I am trying to use it to insert into another table

  -object

  CREATE ORREPLACETYPEmt_mtg ASOBJECT

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  CREATE ORREPLACETYPEREF_MTG ASTABLEOFMt_MTG ;

  -same structure as the use of sampletbl target table in the cursor query

  create table tbl_MT_MTG

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  -procedure

  CREATE ORREPLACEINTERIORTEST_PROCEDURE1

  AS

  ref_cur sys_refcursor ;

  REFR ref_mtg ;

  BEGIN

  OPEN ref_cur FOR

  Select acol,

  BCOL

  DE sampletbl où rownum<10;

  Fetch ref_cur in bulk collectintorefr;

  Insert intotbl_MT_MTG(acol,bcol)selectacol,bcol fromtable(refr);

  commit;

  CLOSE Ref_cur;

  END;

  /

  When I run this procedure fails with

  ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  ORA-06512: at "TEST_PROCEDURE1", line 10

  ORA-06512: at line 2

  Any help on this please...

  Thanks to an OLD POST below

  so perfect helped me! Thank you

  Tubby

  After 5 years of more :-)

  How to store refcursor in collection How to store refcursor in collection

• Help of query SQL - inner joins and the separate results

  Hello
  
  ASP VB, SQL Server
  
  I have a structure of data base with 3 tables - users, albums and photos. each user has a identifier unique, each record has a unique albumid and also contains a column with the user name. each record in the photo has a unique id so that store the user name and the album in which the image belongs.
  
  I'm writing a query that returns a list of the albums for a particular user (based on a user name query string) and who will also bring back the id of the first record in the table for each of these albums photo.
  
  the closest I get is to run a query to select albumid albums where userid = varuserid with a join internal on the pictures table to remove the photo ID - problem I then it comes out all the photos from the photos table where userid = varuserid, so when I do a repeat region to display a list of albums for a certain user It produces a list of all the photos where userid = varuserid
  
  I really want to return just a list of ID album based on the username variable, but also to return the first record in the table of photos for each of these albumids
  
  I tried different combinations of inner joins, select distinct etc but no joy.
  
  any suggestion would be appreciated as am floundering here...
  
  
  
  
  

  First, you must define 'first' with regard to the photos. Is there a
  timestamp? They are numbered inside the album? Do you really care who is
  "first", or do you want simply a shot? You also neglected to indicate if they are
  empty photo albums have been allowed. I assumed that the empty albums are not
  allowed.

  Whatever you decide, the answer will be similar.
  SQL Server tends to get better results with joins with subqueries. You will have
  See such a written request more often with subqueries, and there isn't
  nothing wrong with that, but I'll use a join on a derived table. I have
  have not all column names (hint, hint), so I made them, but the
  Comments should help out you.

  SELECT A.Title, P.PhotoID, P.Caption, A.AlbumID, P.ImagePath
  FROM dbo. A albums
  -build a table derived, consisting of photo ID lowest for each
  album.
  INNER JOIN (SELECT AlbumID, MIN (PhotoID) AS FirstPhoto FROM dbo. Photos
  AlbumID GROUP) AS PM WE A.AlbumID = PM. AlbumID
  -details of the photo for the photo shown in the table above
  INNER JOIN dbo. Photos P on A.AlbumID = P.AlbumID AND
  H. FirstPhoto = P.PhotoID
  User A.UserID ='some WHERE '

  "tedstar" wrote in message
  News:ee4pfn$de$1@forums. Macromedia.com...
  > I am writing a query that returns a list of the albums for a
  > particular user (based on a user name query string) and also bring
  > return
  > the id of the first record in the table for each of these albums photo.

• How can I find out what is the cause of this error in SQL Developer Data Modeler

  Friends,
  
  I am trying to import features in SQL Developer Oracle Designer 10.1.2.3 Data Modeler.
  
  If you need perform the following steps to import:
  
  Template file-> Import-> Oracle Designer-> select connection to the base-> select work area-> select System application-> select an entity-> click Finish-> begins to import
  
  
  During the import process, I see an alert with the message dialog box:
  

  There are errors in import - check Log file 

  Clicking Ok dismisses the alert box, and I see the following summary screen:
  

  Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 584
  Oracle SQL Developer Data Modeler Import Log
  Date and Time: 2010-08-09 14:27:26
  Design Name: erdtest
  RDBMS: Oracle Database 10g
  
            All Statements:           32
            Imported Statements:      32
            Failed Statements:           0
            Not Recognized Statements:      0

  The entity appear in the logical view in SQL Developer Data Modeler.
  
  While they were inspecting the log file, I see the following entry:
  

  2010-08-09 13:50:34,025 [Thread-11] ERROR ODExtractionHandler - Error during import from Designer Repository 
  
  java.lang.NullPointerException
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.createArcs(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.generate(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionHandler.generateDesign(Unknown Source)
       at oracle.dbtools.crest.imports.oracledesigner.ODExtractionController$Runner.run(Unknown Source)
       at java.lang.Thread.run(Thread.java:619)

  Anyone can shed light on this error?
  
  Thanks in advance for any help you may be able to provide.

  We have identified that objects recovered and on the branches are not considered by the Data Modeler. This bug has been connected (#10022016) and is being implemented.

  What

• Why doesent runstate.sequencefile.data.seq.mysequence.mystep.result.numeric contains a measure value when I use it in a reminder of the UUT post?

  Hello

  I want to write that a witch of the csv file contains all the measured values and the limits of my machine. So I try to give the values in post use reminder to a vi. The limits work and the csv file contains all my limits, but the measured values are all 0. I used runstate.sequencefile.data.seq.mysequence.mystep.result.numeric

  I do not want to do with FileGlobals because they are values much.

  Thanks for any advice for this problem.

  There is probably a better way to accomplish what you want.  But to make your life easier, I'll give you the hacky solution:

  Use: Runstate.ProcessModelClient.Data.Seq.MyStep.Result.Numeric

  The funny is that the report must contain all the information you want. Just, I would create an engine to convert your csv look.  If you use 2012 then this seems to be an ideal candidate for a plugin.

  Hope this helps,

• Connection failed SQL State 08001 SQL Server Error 10061 SQL Native Client TCP provider no. could be made because the target machine actively refused it

  Wandering SQL Native Client Datasource - apparently, it's a pretty common problem and I see several resolutions to it.  This problem started for our long company until I started working here.  We do not allow remote connections.  JDE Enterprise Server and SQL server are on the same subnet.  Users are on a different subnet.  SQL Server gets this message tries to connect to the Server Enterprise JDE:

  Connection failed: State 08001 ' SQL': SQL Server Error 10061: Microsoft SQL Native Client TCP provider: no connection could be made because the target machine actively refused it.

  I tried several suggested solutions and do not get the case. Any help is appreciated. Thank you, Sophie

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the SQL Serversupport for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Research component returns incomplete results

  The search pane always returns incomplete results.  For example, to find all files that have been changed since April 8.  Several files are returned-, but two files I modified TEN MINUTES ago aren't.  And who knows how many others were not returned.

  How does search pane decided not to include files which should, and why?  What is the solution to make it work properly?

  If you have any Google products installed on your system, they can take over functions normally performed by Vista (in this case, the advanced search function).  Google does (and sometimes without warning or notification).  You should be able to access the Vista advanced search function by pushing the search button in the Start Menu (assuming that Google has not only taken over as well).

  Thanks for the comments!

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• By using the Service Push SQL Server data push?

  Hello

  We will implement a Blackberry, a Blackberry application that retrieves data from a SQL Server data source. In fact, there will be a web application where users will enter into data (SQL Server) and the BlackBerry user should see the data at the end of each day's work with his BB app on the go. I suppose we must apply a solution of "push technology". The problem is that we do not have a BES. Is it possible to implement a solution without BES, using 'Push the Service'?

  Best regards

  burakk

  No problem. Registration for BIS Eval, test your push button and then you can put in production. Be aware however that PUSH does not work in the simulator of debugging can be a bit of a pain...

• SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  After some testing today with a new installation and plugin subversion in the latest edition of data Modeler this error happens with every start of the tool.

  Have removed and unzipped the installation once again without changing the error.

  After that, I started with another user on my computer, it the error does not occur.

  Is there a system folder to remove the configuration of my personal like jdeveloper and sql developer?

  I lose the most important features, for example. have no browser and cannot open a design.

  Here is the full error stack:

  29 may 2015 22:17:40 oracle.ideimpl.extension.AddinManagerImpl

  SEVERE: Exception initialization 'oracle.dbtools.crest.fcp.DataModelerAddin' extension ' Oracle SQL Developer Data Modeling

  java.lang.NullPointerException

  at oracle.dbtools.crest.swingui.editor.UDPLibrariesPersistence.load(UDPLibrariesPersistence.java:220)

  at oracle.dbtools.crest.model.design.DesignSet.createElement(DesignSet.java:56)

  at oracle.dbtools.crest.swingui.ApplicationView.addDesign(ApplicationView.java:2497)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:435)

  to oracle.dbtools.crest.swingui.ApplicationView. < init > (ApplicationView.java:389)

  at oracle.dbtools.crest.swingui.ApplicationView.getInstance(ApplicationView.java:2258)

  at oracle.dbtools.crest.fcp.DataModelerAddin.initialize(DataModelerAddin.java:553)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:496)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:483)

  at oracle.ideimpl.extension.AddinManagerImpl.initializeAddins(AddinManagerImpl.java:299)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:160)

  at oracle.ideimpl.extension.AddinManagerImpl.initProductAndUserAddins(AddinManagerImpl.java:143)

  at oracle.ide.IdeCore.initProductAndUserAddinsAndActionRegistry(IdeCore.java:2294)

  at oracle.ide.IdeCore.startupImpl(IdeCore.java:1817)

  at oracle.ide.Ide.startup(Ide.java:772)

  at oracle.ide.osgi.Activator.start(Activator.java:209)

  to org.eclipse.osgi.framework.internal.core.BundleContextImpl$ 1.run(BundleContextImpl.java:711)

  at java.security.AccessController.doPrivileged (Native Method)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:702)

  at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:683)

  at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:381)

  at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:390)

  at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1176)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:559)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:544)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:457)

  at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:243)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.internalStart(EquinoxLauncher.java:271)

  at org.eclipse.osgi.framework.internal.core.EquinoxLauncher.start(EquinoxLauncher.java:241)

  at org.eclipse.osgi.launch.Equinox.start(Equinox.java:258)

  at org.netbeans.core.netigso.Netigso.start(Netigso.java:191)

  at org.netbeans.NetigsoHandle.startFramework(NetigsoHandle.java:209)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1352)

  at org.netbeans.ModuleManager.enable(ModuleManager.java:1156)

  at org.netbeans.core.startup.ModuleList.installNew (ModuleList.java:340)

  at org.netbeans.core.startup.ModuleList.trigger (ModuleList.java:276)

  at org.netbeans.core.startup.ModuleSystem.restore (ModuleSystem.java:301)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:181)

  at org.netbeans.core.startup.Main.getModuleSystem (Main.java:150)

  at org.netbeans.core.startup.Main.start (Main.java:307)

  at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:123)

  at java.lang.Thread.run(Thread.java:745)

  Hi Torsten,

  Thanks for reporting the problem. I logged a bug.

  You can view together as "list of system types" directory to "preference > Data Modeler"-probably no longer exists. I guess that the setting for this directory is empty when you start SQL Dev as a different user.

  Philippe

• SQL Developer / Data Modeler - lost visual on the relationships between the tables

  11 GR 2 DBMS / SQL Developer 4.0.3

  In SQL Developer, using the Data Modeler I lost the visuals 'lines' (one to several, etc.) which show the PK to FK relationship between different tables from one of my patterns of relationship.  I know they exist - I'm sure it's my fault--put out something that I don't have.

  I looked on the web but without SOAP.  Can anyone tell me if it is a property and (as applicable) how to re - turn on the property.

  Thanks in advance.

  Barry D.

  Sorry - I found it - the relationship lines were VERY clear yellow and I could barely see it.

  Article by Jeff Smith on the model configuration screen has been very useful in this regard.

  http://www.thatjeffsmith.com/archive/2013/01/Configuring-display-of-model-relationships-in-Oracle-SQL-Developer-Data-Modeler/

  Thank you Jeff (again).

  Barry D

• Virtual data center provider and Clusters of calculation ESXi

  I have 5 ESXi compute clusters, each with 10 ESXi servers in them.  Can I have more than one virtual data center provider for a single ESXi Compute Cluster?

  A links of virtual data center (pVDC) provider of a simple installation resources pool.  As many times as the list of resources is a list of resources of a ROOT cluster, but it doesn't have to be.

  You can extend your pVDC with "elastic pVDC" and the provider of a link to several resource pools (careful with this, you can not just move resources from one to the other to release one later)

• Language SQL Developer Data Modeling

  When I installed SQL Developer Data Modeling 4.0, it came out a German version (maybe because I have German Windows).

  Now, the documentation is in English, it designates the menu names of dialog boxes with English names, I find not in the product.

  Thus, forum entries refer to the English properties.

  What should I do to install this product with the English language?

  Hello

  You should be able to find some datamodeler.conf and datamodeler64.conf in the datatamodeler/datatamodeler/bin subfolder of the folder that you installed (uncompressed) Data Modeler 4.0.0.833 in.

  David