SQLPlus deletes spaces right in field clob on insert

Similar Questions

• Space in a field

  Hello

  We have two fields in a line < FIELD1 > < FIELD2 >

  Field - 1: If a particular condition is satisfied, it returns a string of other nothing.

  So, when the condition is not satisfactory, we get a space instead of field-1. For this reason, we get an extra space at the beginning of the line that we don't need.

  Tried to implement the rule of removewhitespace, but since it is only useful when the field is empty, we don't get the desired result.

  Is there a way for FIELD-1 return nothing so that the space before the FIELD-2 can be eliminated.

  Thank you.

  I guess that scenario has not yet been fully described. I'm going to guess that what you really have is a text box (or TRM with the Assembly paragraph field) with two built-in field references. When you fail to map one of the fields, the embedded reference is not printed, but regardless of the space it occupied is still present.

  When a field rule runs and returns a blank value, the assumption is that there is nothing to assign to the field, because the field data were already empty. However, you have a built-in reference field occupying space - probably you there - see an 'X' and the space remains when no data is mapped to the field because actually no formatting occurred.

  So what you have to do is get the field assigned a value first and then you can return an empty value. Which will be considered as a change to the data and therefore saved.

  Suppose that your domain is named "ABC" in the script where you decide that no value is to be returned, you must do something like this:

  else / * value * /.

  SETFLD ("1", "ABC")

  RETURN("")

  end

  As mentioned, affecting the field first real value will be considered to be a change. Then when the script returns a value that does not correspond to data that is already present, which is considered to be a change as well and in the end, you have an empty assignment in embedded reference.

• space between the fields in a page

  Hello
  
  I have about 5 fields to a custom page, one under the other. But I can't understand how to create the space between these fields vertically?
  
  Any suggestions are appreciated.
  
  Thank you

  create a new element and set its type as spacer

  hope this helps

  Prasanna-

• disk space right on hp E tools

  How to fix the right disk space in hp tools 'E' drive on my notebook g 6 hp pavilion with Windows 7 installed.

  file #2 may be the problem, something is backup on E who should not be, you should know if you have a backup program is running on a calendar and using E as the backup drive, which should not be.

  HP Support Assistant can be the culprit, even if she creates a point of system restore on a calendar, turn it off.

  Now copy this folder by name of HP-computer on the C drive for safe keeping, the go back and delete e

• SQL query to delete the item XMLTAG of CLOB

  CREATE FLOW

  (PAYLOAD CLOB

  );

  INSERT

  IN THE VALUES of flow

  ("< MC > < RECORD > < CODE > 4995908 < code >< TITLE > < /title > reduction< ROOT_CODE > 380146 < / ROOT_CODE > < MOD > 229 < / MOD > < / RECORD > < RECORD > < CODE > 69354563 < code >< TITLE > right < /title >< ROOT_CODE > 380146 < / ROOT_CODE > < MOD > 230 < / MOD > < / RECORD > < /MC > < MT") (> < TYPE > < RECORD > LATERALITY < / TYPE > < laterality TITLES > < / TITLES > < MOD > < MODIFIER > < MCS > 69383650 < / MCS > < / MODIFIER > < / MOD > < / RECORD > < / MT > ');

  I want TO REMOVE the XMLELEMENTS (< TITLE > adrenocortical < /title > AND < TITLE > < /TITLE > RIGHT)

  in the above line, could not convert into XMLTYPE also.

  Version database please? (4 digits)

  The following two statements will remove two nodes of TITLE under MC/RECORD:

  -from 11.2.0.3, by using XQuery Update:

  update stream t
  set t.payload =
      xmlserialize(content
        xmlquery(
          'copy $d := . modify delete nodes $d/MC/RECORD/TITLE return $d'
          passing xmlparse(content payload)
          returning content
        )
      )
  ;
  

  -on earlier versions, using Oracle XML DML function deleteXML():

  update stream t
  set t.payload =
      xmlserialize(content
        deletexml(
          xmlparse(content payload)
        , '/MC/RECORD/TITLE'
        )
      )
  ;
  

• How to prune the spaces in a field and run with lov query

  Hello

  I have a customized OPS page and one of the field's element is of type message entered lov. When the user enters the values for this field lov will validate and it will survey exception if the invalid value is entered in the field.

  Suppose that lov is to have values like 100,200,300,400,500.

  Suppose that user enters the value 100 with spaces for towing, so I want to trim left and right and validate the value after all ready for the values of lov. How can we approach for the same thing?

  Concerning

  Sree

  Hi Mary,

  Using formValue for the validation of the LOV? If Yes, then I guess that's the problem.

  If not, try setting the property to disable the LOV Validation point. This will disable your LOV validation. But in turn, you can check that your trim code works correctly. Recursive debug from here to share your results.

  Kind regards

  Zahid

• Pushing the right aligned field value to the left

  Hi guys,.

  I have a question about good alignment. I have a form with legend and supposedly, points as filler for the space between the legend and the value. I can stalled right value and I replaced the space with points by program, but if the value is too long, the field is cutting values instead of the fill hole (making the left position as the anchor rather than upright.) IMO, if it's just aligned, the anchor point must be to the right instead of the left.

  Can someone help me with this problem? Thank you!!

  For example.

  
  subtitle 1:... Value1

  subtitle 1:... V1WWWWW < WW > (value obtained cut points overlaps with the legend)

  subtitle 1:... V1 (if the value is too short, there is space between the legend)

  PS: or if you can give a different approach in the empty space between the legend and the value of filling with dots, it is also a pts 10 suggestion if it works. Thank you!!!

  Not sure I can send you a sample that shows the number of

  [email protected] and I'll take a look.

  Paul

• Reclaim the unallocated space - right of partitions

  I have two hard drives on my computer.  Recently upgraded to Windows 7 64-bit professional.  After data transfer, removal of previous operating system, I have unallocated space both disks located on the right side (as shown in disk management).  On the first disc, unallocated space is to the right of the only partition on the disk - the main partition.  On the second drive, unallocated space is to the right of a pair of partitions - the primary partition and logical partition.

  First, I want to add to the main partition unallocated space.

  On the second, I add 1/2 on the unallocated space on the main partition, the other 1/2 to the logical partition.

  Disk management does not partition to the left.  So, how can I add disk space unallocated right at existing partitions (on the left).

  Appreciate any help.

  Thanks Palcouk!

  Took time for me to get there (my computer was not dead in the water, in order to recover the unallocated portions of the disk was not urgent)... but I used the program you suggested.  It was working fine.

  1/3 of my disc of Microsoft disk management could not recover (which was empty unallocated space) is now part of my OS partition (C :) and the partition I created for programs (p).  (All data from there, files are on a second drive - for many years now, I've kept my data on a 2nd drive w the OS on the 1st disk).

• Space personalized between fields?

  Is there a way to put a custom amount of space between two labels on a screen that would be smaller (height wise) than to make an addition (new RichTextField()); between the labels?  I want to put a space between my labels, but it gives me too much space.  I would like to maybe 2/3 of the height of richtextfield a vacuum.

  There are two possibilities.

  You can create your own layout manager. This article shows you how to:
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/...

  for easier tasks, I use a SpacerField. It is my own extension of the field class, NON_FOCUSABLE and defines its scope to the desired height and width.

• Prune only to left and spaces of a field

  Is it possible to cut only the start and end of a field spaces?  I have a name field, which I shared later so I can generate simply by using the first name, using the rawValue.split method.  This way I can generate an e-mail that says: Dear John, instead of Dear John Smith , drawing from this field.  The problem I encountered there that the person typing the name sometimes leave space a prefix in front of the name, so the electronic message is generated without a name (so it says 'Expensive' .  Any help is greatly appreciated.

  
  

  -Very well, thank you for the review to null, your event is good, so good.

  Although, if you want to change the value NULL returned, here are the changes to return nothing instead:

  function trim (strValue) {}

  var str = new String (strValue);

  return strValue! is nothing? Str.Replace(/(^\s*) | () \s*$)/g,"") : "";

  }

  Enjoy!

• White space right - I know it is common, but I can't understand it

  Hello

  There are undesirables appearing on the right side of all pages of the site that I am building space: www.luluclients.com/wavesfinal seen on my Macbook Pro.

  I checked several times to make sure that no objects outside the width of the page (from 1200) and can't find. The site looks good in a great browser, but the space appear with scrollbars on my Macbook Pro. I have a separate phone provision, in which case it is important.

  The header and the footer are set to 100% width and it is built as a site fixed (non-responsive). Master pages & normal pages are attached to fixed. There are two master pages, and what is happening on the pages built on one of them.

  I don't know I'm missing something obvious and thanks in advance for pointing it out. It makes me crazy!

  See you soon,.

  Sarah

  There seems to be an empty object > object to insert HTML code in the bottom of the page that clings to the right edge of the page to about 1375px, while your page is 1200px. What is the cause.

• Simple? How do you want 'INSERT' function to return the empty space after a field?

  All,
  
  I just have a PET of brain? I have a situation where I have a field that must return a single space, with a value that has a space before and after it.
  
  Example:
  
  In the text == > I'm < field > go to the office. <-notice no space between the two am, < field > and will
  
  I mean if set to FALSE, then "I am * not * going to the office."
  If true, then "I go to the office."
  
  If it is true, I am just RETURN(""); <-this returns a blank space
  
  
  If FALSE, I tried:
  
  RET = 'no '.
  RETURN ("" & ret & "");
  
  This property returns "I am notgoing to UNRWA. <-don't notice any empty space after the 'no '?
  
  I tried
  
  RET = 'no ';
  RET2 = ("" & ret);
  RETURN (Insert (ret2, 3, ""));
  
  Always the same result. What is strange, that is, if I do a RETURN (Insert (ret2, * 2 *, "")); then he comes back "I'm not tgoing to office" <-note the space between the "o" and the "t"?
  
  Ideas?

  I forgot about it. Depending on which version you use, DAL actually supported a function that will make the hard space for you, like this:

  Val = FLOAT (160) & 'not' & CHAR (160)
  Return (Val)

• Carve out a space of input fields

  I find that some of my script logic fails when an end user happens to drop some spaces in an optional entry field. In other words, if the user presses the SPACEBAR so that an input field has the slider, and then continues, she is no longer a null field and my scripts waiting for data to be there (but data are white spaces).

  What is the easiest way to square the white space (or eliminate a string which is nothing other than space) of all the entry fields? Thanks for reading.

  Simple way is to add the following to the output javascript code: event of the input field:

  this.rawValue

  (= this.rawValue.replace(/^\s+|\s+$/g,""); "

  Whenever a user fills in and leaving the field he'll cut spaces (you can see it happen on the screen).

• Under enter the text for the deletion of a text field

  Is it possible to have a form in Flash with text entry fields as the user full and have some sample text in the field, then when the user left clicks to type in their text the sample text disappears?
  
  I have the following code - userName.text = "< type your name here >";
  
  I HAV looked at the various events but fails to work.
  
  It fills my text field (username) with guidance advising text to fill in the field. Currently when left clicked the field then they delete all the text in the sample before entering their own text. It seems like a simple idea but I've lived AS dictionary and searched old messages for something as cela, but cannot escape. This is one of those annoying last-minute client tweaks that I could really do with ironning outside.
  
  I'm using Flash MX and Flash Player 6 release.
  
  Thanks in advance,
  
  DannySS

  Hello!

  I do not remember if it is supported by Flash Player 6 or not, but if I remember correctly, I used to do it like this:

  I hope that you can use. And I would actually put the original text, so when the user is not this particular entry field I could reload the original text, perhaps even in a different color so that the user would knows he must fill in this field.

• Align to the right numeric field

  I'm trying to align to the right of the numeric fields in a table of results. I tried the two numbers and strings and cannot get the numbers to align to the right. I even wrote a method to manage alignment, and nothing works.

  in my table of results, I made the following

  in the controller class adds:

  on top
  Import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
  Import oracle.cabo.ui.data.DataObjectList;

  within the existing class
  ' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)
  +{+
  super.processRequest (pageContext, webBean);

  OATableBean = tableBean
  (OATableBean) webBean.findIndexedChildRecursive("*MyResultsTable*");

  tableBean.prepareForRendering (pageContext);

  DataObjectList myColumnFormats = tableBean.getColumnFormats ();

  field 1
  oracle.cabo.ui.data.DictionaryData = myFieldColumnFormat
  (oracle.cabo.ui.data.DictionaryData) myColumnFormats.getItem (pageContext.findChildIndex (tableBean, "* MyField *" "'));
  just do something with the area now...
  myFieldColumnFormat.put (CELL_NO_WRAP_FORMAT_KEY, Boolean.TRUE);

  After doing that, the number of 'My domain' field is shown just aligned.

  Please change MyResultsTable and MyField as you see in the browser of your object.

  If you need more of a field, please copy the section "/ / field 1" accordingly.

  Hope this helps
  Concerning
  Volker