sqlplus script + the return in unix script value value not rehired.

Similar Questions

• the host performance, no update values not returned to the orchestrator script...

  Hope someone can tell what I'm doing wrong.

  I'm still on 5.5 and trying to get the load data for ESXi hosts (via connected to the orchestrator Server vcenter) to decide on which host is the best target for vmotion-action.

  As I could not find any workflow builtin or efforts to get data to load, I tried to dig myself via a script.

  • find all hosts
  • for each reading of the host.summary.quickStats.overallCpuUsage host

  I have values, but they are static and do not get updated.

  If I use perl-sdk and perform the same actions to vcenter I get updated for each esxi host values.

  Browse objects via the web on the server vcenter watch also updated these values.

  If only my orchestrator workflow seems to be wrong.

  I do not suspect that the workflow in orchestrator performs a query only the inventory and not the living objects. It is much faster than doing the same thing with perl-sdk.

  My little script (which could be run in a single Scriptable task with no impression one journal entry/exit). Problem can be seen by newspaper printing. Total used MHz does not change in my environment.

  --------------------------------CUT

  var host = System.getModule("com.vmware.library.vc.host").getAllHostSystems ();

  var tothz = 0;

  for {(i in hosts)

  var cpu_used =. summary.quickStats.overallCpuUsage of hosts [i];

  tothz = tothz + cpu_used;

  }

  
  

  System.log ("tothz:"+ tothz ");

  --------------------------------CUT

  Q1: I am doing something stupid in my script?

  Q2: I have to do some extra steps to get the updated values?

  Q3: Is there a better way to find/load-performance data for ESXi hosts?

  Stupid enough to write the sollution myself

  It is possible to force an update of the inventory values for objects that are important to your script/workflow.

  It can be done by the following function in a script.

  VcPlugin.refreshObjects (object-to-update - in - stock)

  So for my specific problem, I could solve it with a single additional line.

  --------------------------------CUT

  var host = System.getModule("com.vmware.library.vc.host").getAllHostSystems ();

  var tothz = 0;

  for {(i in hosts)

  VcPlugin.refreshObjects (the hosts [i]) / *.< my="" new="" line="">

  var cpu_used =. summary.quickStats.overallCpuUsage of hosts [i];

  tothz = tothz + cpu_used;

  }

  System.log ("tothz:"+ tothz ");

  --------------------------------CUT

  This seems to force an update of the inventory values before I use them.

  It will certainly slow down my script a little, but it's part of the game.

• Expiry of the return label.

  I started a back and received an e-mail UPS shipping label. My question is can I just sell it to my friend? Or do I need to return it. I see that the UPS label expires in 30 days... Thanks for any help

  IMHO, you can sell the computer if you wish.  The shipping label is just a piece of paper until its scanned by UPS for the returned product, so if you do not return the Dell product will close on your authorization to return as being unused.  If you sell your friend's computer to ensure that they fill out a transfer of ownership, so the warranty transfers to them.

• How to get the return value in sqlplus to index?

  Hello
  
  I am a PL/SQL Developer, and I have a problem with an existing batch.
  
  Here's the situation:
  I have a lot of unix, calling a first script sql with sqlplus (call script0.sql )
  script0. SQL call other scripts sql with the command @ (script1.sql, script2.sql,... = > scriptx.sql )
  My version of sqlplus is 9.2.
  
  ScriptX.SQL modifies the data in table with insert or update and not commit or rollback anything (it is in charge of script0.sql ).
  If there is an error produced in a clue all changes must be rollbacked.
  Unfortunately when something fails, it returns only to script0.sql without any information on his breaks down, so continuous script0.sql and when he arrivals all changes are committed because the State of script0.sql is successful when the exit is made.
  
  Is there an equivalent of the $? UNIX in sqlplus to obtain the return of a status @scriptx.sql?
  
  -----
  Here is the general syntax of the script0.sql :
  
  WHENEVER SQLERROR EXIT 99;
  WHENEVER OSERROR EXIT 98;
  
  @script1.sql
  @script2.sql
  
  "exit";
  -----
  
  Here's a simple scriptx.sql file:
  
  Insert into table values (x) (y);
  
  -----
  
  Published by: user10713865 on October 30, 2009 06:51

  Hello

  You can use 'Whenever SQLERROR WHAT' options to build the logic.
  Use: 'every time THAT SQLERROR EXIT DISMANTLING', if you want to there are a whole script error
  OR "WHEN SQLERROR CONTINUE ROLLBACK", if you want to restore and continue to the next.
  You might explore other options 'whenever SQLERROR WHAT' to suit your logic and add "COMMIT / ROLLBACK" to not relevant.

  See sample tests below:

  SQL> create table t1 (col1 number primary key);
  Table created.
  

  * 1. In script1 case fails, then restore and exit *.

  kallo:f632736> cat 1.sql
  WHENEVER SQLERROR EXIT ROLLBACK
  insert into t1 values(1);
  insert into t1 values(1);
  kallo:f632736> cat 2.sql
  insert into t1 values(2);
  kallo:f632736> cat main.sql
  @1
  @2
  
  SQL> @main
  
  1 row created.
  
  insert into t1 values(1)
  *
  ERROR at line 1:
  ORA-00001: unique constraint (ADMLHMGM.SYS_C0013874) violated
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select * from t1;
  
  no rows selected
  

  * 2. When script1 fails, then restore and continue to script2 *.

  kallo:f632736> cat 1.sql
  WHENEVER SQLERROR CONTINUE ROLLBACK
  insert into t1 values(1);
  insert into t1 values(1);
  
  SQL> @main
  
  1 row created.
  
  insert into t1 values(1)
  *
  ERROR at line 1:
  ORA-00001: unique constraint (ADMLHMGM.SYS_C0013874) violated
  
  Rollback complete.
  
  1 row created.
  
  SQL> select * from t1;
  
        COL1
  ----------
           2
  

• Windows Media Player Script ERREURUne error has occurred on this page of script line: 303 tank: 25 error: the value of the property 'btnfinish_onclick' is null or undefined, not a function of object Code: 0

  Where to find information on the album in Media Player, I get the following message appears when I click on the button "Finish":

  An error has occurred on this page of script
  Online: 303
  Tank: 25
  Error: the value of the property 'btnfinish_onclick' is null or undefined, not a function object
  Code: 0
  URL: HTTP://FAI.MUSIC.METASERVICES.MICROSOFT.COM/FAI/ALBUMMATCH.ASPX?LOCALE=409&GEOID=F4&VERSION=11.0.6002.18311&USERLOCALE=409
  Do you want to continue?
  By clicking 'Yes' or 'No' doesn't produce any action. Does 'Cancel' which is there for that.
  This feature works flawlessly for months and now I can't download the album or graphics information.
  Help, please. Thank you
  original title: Windows Media Player Script error

  I solved this on my machine after a few game.

  When you arrive at the last stage of the search for album information, before you click on finish, click the small globe in the upper left corner of the dialog box.  This refreshes the connection to the server.  Click on finish, then it started working again.

  Refresh a couple of times before that it worked but so far 2 of 2 machines working again on my other maching.

  Hope this helps!

  Thank you thank you. Sometimes, it takes "Refresh" several times but finally the player "seems" to calm down.

• Script to change the BIOS VMX. UUID value?

  Due to how transfer us models of VM to stand-alone ESXi 4.1 guests before their junction to vCenter, the UUID for the models come out the same. We use Veeam Backup to restore the templates, so they can be compressed enough to fit on a DVD.

  I'm looking for a little PowerShell script that can define a custom BIOS. Value of UUID for a VM named on ESXi 4.1. 1002403 KB VMware has a Pearl script that allows you to do this, but we are a store of PowerShell and would make it easier for us to customize in the future. Ideally, the script would generate a UUID Pseudo-aleatoires without user intervention. For example, to set the last six digits to use the current month, day, and minute (MMDDMM, for example 100111).

  vCenter will create of course unique UUID for our production of VMs, so it's only to manage the initial models, that we download to standalone servers in "factory".

  Ideas?

  Try something like this

  $vmName = 
  $newUuid = 
  
  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.uuid = $newUuid
  $vm = Get-VM -Name $vmName
  $vm.Extensiondata.ReconfigVM_Task($spec)
  

  Note that the call to the method it is more simple forms, not waiting for the completion of the task, no error checking.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How can I apply an opacity for the blending mode Script value?

  Hello

  How can I apply an opacity for the blending mode Script value?

  Is this something like?

  theLayer.blendingMode = BlendingMode.SOFT_LIGHT;  Add blendingMode with opacity for selected layers

  var opacity41 = opacity

  Thank you

  It seems that you have the right merge mode part. The other part of your question how to set the opacity of the layer value?

  It is like this:

  theLayer.property("Opacity").setValue (41);

  Dan

• SQLPLUS script execution vs dot comma

  Hello world
  
  is it possible to set up such sqlplus when a statement (for example, an INSERT) do not have a semicolon at the end (or and / at the beginning of the next line) an error is returned?
  
  Here is an example:
  
  INSERT INTO emp (emp_no, emp_name) values (5, 'John')
  
  INSERT INTO Emp_status (emp_no, status) values (5, 'full time');
  
  Running a script that contains these two lines with sqlplus won't the first home and will not give an error.
  
  By default, these human errors are handled silently through sqlplus.
  
  I'm pretty sure, there is no way to detect it, but in case I'm wrong, I ask the question.
  
  Best regards.
  
  Carl

  You need to set sqlblanklines on:

  SQL > set sqlblanklines on
  SQL >
  SQL > select * from the double
  2
  3
  4
  5 Select * twice;
  Select * of the double
  *
  ERROR on line 5:
  ORA-00933: SQL command does not complete successfully

  SQL >

• Y at - it an 'if statement ' to SQLplus scripts?

  Is there something like an "if" statement that I can use in SQLplus scripts?
  
  For example, I want to check if the value of a certain variable is equal to '123 '.
  If so an ALTER TABLE command must be performed otherwise a DROP TABLE command.
  
  Peter

  You can use the function CASE and DECODE in SQL queries like this:

  SQL> select * from t1;
  
          ID
  ----------
         123
         222
  
  SQL> select decode(id, 123, 999, id) from t1;
  
  DECODE(ID,123,999,ID)
  ---------------------
                    999
                    222
  
  SQL> select case when id=123 then 999 else id end from t1;
  
  CASEWHENID=123THEN999ELSEIDEND
  ------------------------------
                             999
                             222
  
  SQL>
  

  However, you cannot perform DDL operations in SQL queries. You can achieve the same using PL/SQL using EXECUTE IMMEDIATE.

  Asif Momen
  http://momendba.blogspot.com

• OATS: script entering does not in the if-else statements

  I created a functional test using Oracle's Web. My database file (.csv) contains a number of numbers that are used to browse through the script with different values. now in my loop for, I have included an if-else with action statements in these (Actions like) by clicking on the different tabs. Now, when I run my script, is to not enter the if-else statement and jumping directly to the next step.

  Here are my script:

  beginStep ("search page", 5)

  {page opening}

  String Var1 = (string) 'value from the .csv data bank ";

  for (int i = 1; i < = 2; i ++)

  {

  beginstep("/ASC",0)

  {

  if(var1=="ABC")

  {

  Task1;

  Task2;

  }

  ElseIf (Var1 == "efg")

  {

  Task1;

  Task2 ;}

  }

  }

  endStep();

  beginStep("/asc",0)

  {

  Task3;

  Task4;

  }

  endStep();

  }

  According to my above script, the script is to jump directly to TAsk3 and 4, instead of going to task if-else performing 1 and 2.

  Thanks in advance.

  Kind regards

  Deepak Khari

  Hello

  Use eval(), c.

  
  

  String Var1 = eval ("{{db. Var1.ColumnName}} ")." ToString();

  System.out.println ("scnro_class--->" + Var1);

  
  

  Kind regards

  Dembélé M
  

• Import specifications of centralized in Sqlplus scripts possible column format?

  I want to centralise the definitions of column as
  
  FORMAT of COLUMN TABLE_NAME A20 direction "foobar".
  ...
  
  keep in a centralized definition file and import into several Sqlplus scripts (executing).
  
  Is - it somehow possible?
  
  Peter

  Is - it somehow possible?

  Yes put all definitions of column in a single file, you say coldef.sql

  Whenever you need to use it in a script that is run with the help

  Start coldef.sql

  Max
  http://oracleitalia.WordPress.com

• Use the return value to do step digital multiple success or failure

  Hello

  I use a multiple digital step to check several measurements by an external DMM through a function created in CVI.  I would like to use the return value of the function to replace the global status of the step. The reason is that the return value indicates a communication error, while steps are being taken, and which would lead to a "fake" fake or false 'Pass '.

  What I would do is more or less this >

  If the return value is 0, then check if the measuremets are between the limits

  If return value! 0 = there was a communication error so step continues to operate independently of the measure.

  I tried combining multiple digital step with a step of pass/fail, but it does not work.

  I also trie to change the expression of the status of the multiple digital steps but basically ignores him.

  Any ideas?

  Thank you

  Javier

  Why don't you just make that return the value limits for multiple numerical limit stage.  Comparison of the EQ value and the low limit to 0.

  That would make the most sense.

• Display success or failure in report based on the return value

  Hello

  I try to incorporate TestStand to TestComplete by using the ActiveX/COM server adapter  I have the COM setup so that TestStand can call a test in TestComplete and have TestComplete to return a string value (true | false) to TestStand.

  Now I need to get the TestStand report to view 'pass' or 'fail' text for this call sequence, by the return of TestComplete string.

  Is there a place in Expressions or Actions Post I can say and how:

  Returns 'True' = pass

  Returns ' false ' = failure

  Thank you.

  Hello

  (Option 1). Use a string value Test.   The Limits.String would be 'True '.  It would be the easiest because you already channels return of your ActiveX call.   You could do your ActiveX calls a test of a string value.

  (Option 2). Use a step of success/failure.   You can set the string returned in a local variable and then create another step of success/failure that would pass/fail criteria as Locals.StringReturned is 'True '.

  Here are the two options that we hope can help you get started...

  Thank you

  PH

• Executed as user: domain\username. The return value is unknown. The process exit code was 128. The step failed.

  I have a job with 20 steps. This error occurs for any stage of perticular. It produces randomally at any stage.

  "The return value is unknown.  The process exit code was 128.  The step failed. »

  This is not the right forum for SQL database issues.

  Please repost your question in the MSDN SQL forum
  http://social.msdn.Microsoft.com/forums/en-us/sqldatabaseengine/threads

  Sincerely,

  Marilyn

• Possibility to get a popup to display the display value "" and not the "return value".

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  Concerning

  Ben

  Benton says:

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  See limiting the number of values in a LOV

  If it comes to a page element, and then change the type of Popup LOV key.

  If there is a control in a table, it's another reason to upgrade to a supported version, or the tabular form will need to be converted to be manually generated and processed in order to allow the appropriate control be returned using the apex_item.popupkey_from_lov method