Square box in AE not appearing in the first

Similar Questions

• Any Composition AE (dynamic links) and a text does not appear in the first (CS4)

  I have an AE comp I did with a few credits a few weeks which was 20 seconds ago. Now, I go back to edit it - done long 52 seconds (Comp changed settings), I increased the length of each text box appears a little longer; then I also copy & paste a text layer and put it between the 2nd to last and the last layer of text.

  Then I go and copy/paste about five more layers that all go behind what I had before - in my AE comp I also put the other. I edited all the layers of copied text and type in all that much good.

  I have a background with text on top of that. The background is precomposed and then all text layers in the final composition.

  When I go to the first I see * some * of the changes immediately.

  When I go to the for first now to watch, all changes are applied until the last layer of text I've had since a few weeks ago - including all changes made to these layers as length, font and size, as well as the text layer, I put between the last and the 2nd to the last layer.

  But that's it - once the last layer before is played, no layers of text appear, but the background is perfectly well yet, everything as it should.

  In AE, it plays well and looks great.

  What I am doing wrong? How can show in AE but not first - if the background shows?

  I went to the AE and has one of the layers of this latter text to see what he would do in the body and he hid the background well, but the text still does not appear in the body but in AE.

  Police is still - Adobe Caslon Pro

  My system:

  Windows 7 Pro (64 bit)

  Intel Core i7 980 X 3.33 GHz

  Drive system 750Go

  2 TB disk Media

  12 GB memory

  GeForce GTX 470

  Running Adobe Production Premium CS4

  AE version 9.0.3.8

  Body version 4.2.1

  Any idea would be appreciated!

  Thank you!

  Delmar Penner wrote:

  I changed it to the 3D and moved a few around closer - watched from top, right, left, back... Yes, all the different points of view and could not see anything wrong.

  In fact, the need to use the 3D is not very apparent in this model.  I would use 3D unless there was a reason to do so.

  Delmar Penner wrote:

  ... everything up to "Other credits" do not appear...  I noticed that there is the kind of grid with the blue symbol just in front where I name the layers - what does it means? It's all those who do not have their appearance... Any connection?

  Indeed it is!  Did you by mistake guide layers, not the text layers.  Here is their description:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS3878526689cb91655866c1103906c6dea-7e76 a.html

  .. .and here is more about them:

  http://community.Adobe.com/help/search.html?q=guide%20layer&HL=en_US&LR=en_US&l=AfterEffec ts_product_adobelr & site = aftereffects_cs5_all & auto = 1 & Filter = 0

• Name tag and description given to clip in 2014 prelude does not appear in the first 2014

  I get the comment marker, but the text of the name and description to not appear.

  Data remains available.

  Here is my tag:

  

  Here it is used as a prelude:

  

  and here's what markers look like in first 2014:

  

  Any help here on what I'm doing wrong?

  Thank you!

  Yay! Fixed in the latest version! Woo - hoo!

  MtD

• the extensions Manager does not appear in the first

  I downloaded the new version of first CC and the new extension manager so that I can enjoy the new speech - transcription function.

  But when I go in first the extension field is grayed out.

  It will be grayed out until you install an extension - this is expected behaviour.

• Hebrew does not appear in the securities or Firefox search box tabs

  Hebrew does not appear in the Firefox search box, or in the title tabs. But when I type in the Firefox search box and press ENTER, it searches and displays written correctly in the Google search box in the Google results page. Firefox is the latest version. Mac's OS X 10.6.8. I see that Microchip470 has posted exactly the same problem.

  What finally solved my problem has been installed the module "Theme font & size changer", then change the font in the search box of Firefox thanks to the add-on.

• Button on the printer does not appear in the PageSetupDialog box.

  Hi all

  We use the instance of PageSetupDialog which works very well under XP, but we run our application in Win 7 Print button does not appear in the dialog box how to back this printer button

  Hi vaibhav,

  1. what application you are faced with the question?

  2 are you facing this problem with a specific application or with other applications too?

  3. do the printer works fine on your system?

  Please re - write your question, this time make sure you have all the necessary information to help you better on this issue.

  Suggestions for a question on the help forums

• Bounded task flows does not appear in the dialog box

  I use JDeveloper 11.1.2.3.

  I have a jsf page, called main.jsf, which has a button that calls a workflow bounded like a dialog box.

  When the homepage is called without the extension of jsf, as https://adf-tmp.xxx.com/receiving/faces/main and the button is clicked, everything works and the stubborn workflow appears as a dialog box.

  But the stubborn workflow does not appear if the homepage is launched with the jsf extension, like https://adf-tmp.xxx.com/receiving/faces/main.jsf.

  When the button is clicked to start the flow of stubborn work, just nothing happens.

  What is the cause of this?

  Thanks in advance.

  Hello

  the reason is that you call the physical page out of context in the workflow. Because the popup is a workflow feature you must ensure that the workflow is referenced, which is not if you call the physical file only (in which case would be sent to the underlying JSf, but not the workflow)

  Frank

• Jotformforms (import with HTML box) do not appear in the breakpoints after the forst breakpoint. . Using the slider I see the form disappear, I said not to give the command hide this breakpoint.

  When I try to import a form (jotform) with the imported HTML of the form box can only be seen in the first breakpoint (wider). When I move the cursor to the left, I see that he form in other breakpoints. When I systematic behavior of the site with the browser the form disappears. I have not used the hide command in this breakpoint.

  Maybe it's because the Jotform itself is not fluid/reagents. Looking into other forms of third parties to use with Muse which are fluid. Not sure those who will work best still but looking Typeform.

• I downloaded the profile for Costco, but the ICC profile does not appear in the assign profile box.  Thoughts?

  I use Photoshop CC 2015 on a new iMac OS X El Capitan version 10.11.2.  I downloaded the profile of the local printer from Costco and it is saved in the library/Colorsync/Profiles, as well as a few others who migrate on the previous iMac.  With the image open in Photoshop I go into Edit/Assign profile, but the new Costco ICC profile, as well as the others do not appear in the list of available profiles.  I restarted the iMac and Psalm what Miss me?

  How to install color - Apple OSX 10.11 El Capitan printer profiles

  Let me know how it went. Apparently, the rules have changed with plug body electric.

  Gene

• Sites of bookmark in the file that does not appear in the window

  I need to put several websites in a folder, I named "Accessories". He is not one of the four files in the drop down window. So, I have to save it in one of the four and then open that folder and move the site to the "Accessories" folder

  Is it possible to change the four sites in the window (two of them that I haven't used in years)? Then go straight to this folder?

  The seal shows what is happening.

  What I want to do is to click "bookmark this page" and be able to put it directly in a folder.

  I want to change the four folders listed in the drop-down list.

  What I do is put a bookmark in the 'Western Short Story' folder, and then open up the bookmark in the "Accessories" folder that does not appear in the box.

  It's not a huge deal, but I'm working on about 20 sites today and I would like to save a few steps.

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• The mouse cursor does not appear on the center of the screen to start upward.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  Suggestions:

  Go to Safe Mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

  1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• No system sound and audio icon does not appear in the notification area

  sound problems

  Player windows media are the only sounds that work on my computer. Unable to get sound when on the internet or other windows sounds. also the volume icon disappeared completely from the notification bar

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link.

  How to enable or disable the system tray in Vista icons (there are several methods
  and you can to use them all).
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  ============================================================

  When the icon is back - Double click on it see - mix - if all the elements are DUMB or sliders down all the way.

  -------------------------------------------------------------------------------------------------------------

  After above, if you have still no Internet sounds. (Be sure to check the MIXER you start one
  audio programs just in case where for MUTE or a slider is broken).

  IE - Tools - Multimedia Internet Options - Advanced tab - check sounds in Web pages
  APPLY / OK - close and restart IE.

  If it has been verified - uncheck the box - APPLY / OK - close and restart IE - then go back and re-check.
  APPLY / OK - close and restart IE.

  Solution to Youtube or other Flash video embedded no sound in external websites
  http://www.mydigitallife.info/2007/08/16/solution-to-fix-YouTube-or-other-embedded-Flash-video-no-sound-in-external-websites/

  and, if necessary:

  Adobe Flash no sound WaveMapper trick
  http://www.mydigitallife.info/2007/08/15/Adobe-Flash-no-sound-WaveMapper-trick/

  --------------------------------------------------

  You need to maybe uninstall and reinstall Adobe Flash

  How do I uninstall the plug-in Adobe Flash Player and ActiveX control
  http://kb2.Adobe.com/CPS/141/tn_14157.html
  Install Adobe Flash Player
  http://get.Adobe.com/flashplayer/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Total memory of 4 GB newly installed does not appear in the Task Manager

  Total memory of 4 GB newly installed does not appear in the tab of the Task Manager performance. Only 3.3 GB appears. Is something wrong with the chopsticks of mem or mem from Vista 32 bit OS limit uses at this level. I have SP2.

  http://support.Microsoft.com/kb/929605

  "System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed.

  This behavior is the expected result of some hardware and software factors.

  Various devices in a typical computer require memory-mapped access. This is known as memory-mapped i/o (MMIO). For the MMIO space is available for 32-bit operating systems, the MMIO space must reside in the first 4 GB of address space.

  For example, if you have a video card that has 256 MB on-board memory, that memory must be mapped in the first 4 GB of address space. If 4 GB of system memory is already installed, the part of this address space must be reserved by the graphics memory mapping. Graphics memory mapping replaces part of the system memory. These conditions reduce the total amount of memory available to the OS System.

  The reduction in available system memory depends on the devices that are installed in the computer. However, to avoid potential driver compatibility issues, 32-bit versions of Windows Vista limit the total available memory to 3.12 GB. See the section 'More information' for more information on potential driver compatibility issues.

  If a computer has many features implemented, the available memory can be reduced to 3 GB or less. However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB.

  See you soon.

  Mick Murphy - Microsoft partner

• SendTo shortcuts do not appear in the drop-down list sendto

  I just have to move on to Windows 7 and the drop-down list sendto does not work properly.  I have consulted the folder sendto successfully by the username C:\"Users\Your '\AppData\Roaming\Microsoft\Windows\SendTo.  There are shortcuts and standard destinations that are not appearing in the actual drop-down list.  The only destinations referenced when right click and access the sendto method are the disk of the user and a sendto folder that places the documents to the location C:\"Users\Your username"\AppData\Roaming\Microsoft\Windows\SendTo.

  Hello

  Make sure that you are logged on as administrator.

  Start - type in the area of research-> shell: SendTo
  Press enter

  Shell commands
  http://www.SevenForums.com/tutorials/4941-shell-command.html

  =======================================================

  If necessary:

  You use professional, Ultimate, or Enterprise (part of a domain)
  where could be set in Group Policy (GPedit)? Antivirus/security, supposed
  refinement of public and other services could be the cause of the issue.

  Try to use a clean boot, and then check by removing and add a.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  ====================================================

  Other methods.

  1 follow these steps to remove corruption and damaged/missing system files that may have a role of repair or replacement, and it must be eliminated.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------------------------------------------------

  2. troubleshooting questions Menu context (right click) are a process of eliminating exercise.

  Make a right-click is slow or weird behavior caused by context menus managers
  http://WindowsXP.MVPs.org/slowrightclick.htm
  and here:

  Manage the entries in the context menu for files, folders, disks, and objects in the Namespace
  http://WindowsXP.MVPs.org/context_folders.htm

  The ShellExView utility displays the details of shell extensions installed on your computer and allows
  easily disable you and enable each shell extension.
  http://www.NirSoft.NET/utils/shexview.html

  ShellMenuView is a small utility that displays the list of menu items which appeared in the context
  menu when you right click on a file/folder on Windows Explorer and allows you to easily disable unwanted
  menu items.
  http://www.NirSoft.NET/utils/shell_menu_view.html

  How to change or remove items from the right click Menu.
  http://www.WinVistaClub.com/E11.html

  =====================================================

  If you have exhausted these try a repair Installation that allows you to
  keep the programs and data, although redundant backups are always a
  good idea. It is less likely to help you if you have not used the above
  methods such as the same parameters and conditions exist.

  I hope this helps.

  I hope this helps.