EA6500, four Xbox 360, four WUMC710, firmware updated to 1.1.28.147876, now broken.

Similar Questions

• The streaming of Media Center PC on Xbox 360 problems after recent updates

  I've been streaming video of my Media Center PC on my Xbox 360 for about a month now.  I've never had problems until I installed the new update today.  Now I can listen to just a show for about 5 minutes then my PC freezes.  My configuration is:

  • Windows 7 (64-bit)
  • NVIDIA GTX295 1 GB video card
  • 8 GB of DDR2 memory

  If there is no additional info that could help please let me know.

  Thank you

  Robert

  Hello
   
   
  
  1. remember you number updates that you have installed?
  
  Method 1.
  Use the homegroup troubleshooter.
  a. Please open Control Panel and click on troubleshooting.
  b. click on "Network and Internet", then select the homegroup.
  c. troubleshooting tool find the cause and fix the problem? If this isn't the case, please move on next steps.
   
  Method 2.
  Check the following relevant services.
  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  b. right click on the "Peer Networking Identity Manager" service and click Properties.
  c. Please click the Stop button to stop the service temporarily.
  d. access to the following folder:
  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking
  e. delete all files and folders inside.
  f. start the following service gain: Peer Networking Identity Manager
   
  Method 3.
  You can disable the anti-virus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 4.
  If the steps above do not better work that you can do is to perform a restore system just before the point where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry smartphone WIFI / XBOX 360

  Good question for you GURUS... I have a Curve 8530...
  Is it possible for me to do a scan with my xbox 360 and locate the mobile web and connect to Internet with my Xbox 360?
  New teas KINNECT XBOX 360 have built in wifi...
  Personally, right now, my only connection is mobile and everyone around me is secured and locked...
  It would be great if I could connect via the mobile web and get live XBOX like that...

  Mobile Web for an xbox 360 does not ping hours will be unreal and barely enough bandwidth to even try to start Xbox Live on a BB.

  You would have to fill the connection to a wifi card to a pc to even bother. Get a real ISP if you want the net. A network of cells is not designed for games...

• How can I connect my xbox 360 controller to my iMac (last updated: mountain lion)? I bought star wars force unleashed on AppStore and it said only 360 controller can be used then, how can I connect to my mac? I have the wire on the load control

  I bought star wars power of the force on the apple app store. It says that i can use the controller to xbox 360 to play other than keyboards. now how to connect the controller 360 for mac? I have the charger cable to connect to the controller that has a usb key that I have connected to my iMac (desktop), but this isn't like the ps3 where he worked. Help, please! I have the latest version of the update of the iMac, which I believe is the mountain lion

  Not sure if this will help. Here and all over the web search will show that you mixed results.

  Try this download. I have a new Macbook Pro El Capitan 10.11.3 running. Just installed this to use my old Xbox 360 wired controllers USB to play Lego games. Despite the mixed reviews, this seems to have worked perfectly and actually gives you an ability to customize the controller.

  Al https://github.com/360Controller/360Controller/releases/tag/v0.15_beta5_unoffici

  NOTES:

  (1) it is Beta version 5; newer than all the other versions of this utility I saw reviewed about the feature. You may need a different version because your version of iOS, but I'm not an expert here.

  (2) once installed and the computer restarts, you will find the utility as a new icon in the system preferences (the gear in your dock icon, probably), not applications, utilities, etc.

• Update Xbox 360 title presentations

  I am currently waiting on a title update request to be approved for the Pinball Arcade machine.   This update is necessary to buy and download new tables Pinball for consumers.  I want to know if it is possible to speed up this process, as the owners of Xbox 360 are now 6 tables of Pinball behind other users of the platform.   Fans of this game have been warned by Farsight (the developer of the game) they expect on Microsoft for the approval of the submission until they (Farsight) can give us a release date.

  Is there anyway someone let fans and I know how long this process takes actually and what could be done to speed it up.  We all know that Microsoft wouldn't want to keep the CUSTOMERS PAID in dark waiting like this, right?   There are many of us ready to give you our money for the new DLC!

  Thanks in advance!

  You must post in the XBox forums.  http://www.Xbox.com/forums/

• My Xbox 360 update has been cancelled in the Middle until the update and is now glued to the screen saver.

  UPDATE XBOX 360 HAS CANCELLED IN MIDDLE NOW SA DOES NOT WORK

  I tried to update my xbox 360 to connect JOIN XBOX LIVE BUT MY BROTHER TURNS IT OFF BY SWITCH please TELL ME WHAT to DO. I'm blocked some how it's stuck to the xbox screen saver... Help, please.

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to the Xbox 360 and would be better suited to the Xbox technical support community. Please visit the link below to find a community that will provide the support you want.

  http://support.Xbox.com/support/en/us/NXE/default.aspx

• Message from Xbox 360 error 3151-335A-1380-2203-C000-0001 when you try to update

  I have a Xbox 360 in America and am currently in South Korea. Today, I tried to update my xbox 360 and got the following error 3151-335A-1380-2203-C000-0001

  This error often when the console is depassese. If not, then you must call the support technique xbox and ask to repair your console. If you have warranty still valid and you console is not exceeded then Microsoft will repair for free.

• Is there an update for Xbox 360 in 2011?

  Is there an update for Xbox 360 in 2011?

  Hi FerrisFerguson,

  The question you have posted is related to the Xbox 360 and would be better suited to the Xbox community. Please visit the link below to find a community that will provide the best support.

  http://forums.Xbox.com/

• What open firmware source for my valet M20 more should I use to get the internet to an xbox 360?

  I have a Valet more M20 I want to use to connect my xbox 360 to the internet. I want to use it instead of getting a wireless adapter for my xbox 360.

  Should I use Freifunk, openwrt or something else. DD - WRT seems to be updated more so I don't want that one, and I don't think it's compatible anyway.

  Thank you for your time.

  Hello

  Please ask your question in the Xbox forum.

  http://www.Xbox.com/en-us/forums

• 2012 update Xbox 360 Wireless Controller? Why is there not a?

  I wonder this for about two years now.
  Microsoft is generally quite well to this kind of thing.
  If it is not broken, I guess that she doesn't deserve any attention good huh.
  I was looking for a driver for this Xbox 360 wireless controller.
  The variety of PC mine is one that is very rare now, I believe that the innovator was "egg".
  In any case its identical to the Xbox 360 consoles computer only wireless controller uses the usb port and connect it to the computer.
  Just want see an update for this product...
  If not why not?

  Hello

  Answers has no influence on the XBox or XBox Live must
  contact with them.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't use the Xbox 360 controller for condemned Criminal Origins

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I can't using a wired Xbox 360 controller as a joystick for the origins of felons game.
  • I looked online for a solution and close using joy to key. I could map each button and it was totally functional, but I was still unable to turn or to consider, if I could walk because I had mapped the left analog stick for market controls. I tried to change the settings for the joystick in the game, but they are not what I noticed at all.
  • the game recognize at least some controller, when the mapping in the keyboard settings, it recognizes the buttons, but not the triggers or the analog sticks.
  • I tried to update my drivers, I tried different usbs and always made sure that it was connected, all of the simple things.
  • I really want to play this game, and I'll be really disappointed if I have to use the keyboard and the mouse to do it, I'm not comfortable at all to aid in a fps game.

  Thanks for your help!

  but in fact I ended up understanding.

  apparently my controller was defaulting to an old driver or the wrong driver or something, so the game incorrectly recognizes it. at least partially wrong.

  the old, updated, deleted totally worked! for the most part, had yet to use joy to key to map triggers, and the d - pad is recognized as a button, instead of four separate.

• ER4.12 - E337 for KDL52VE5 firmware update

  My KDL52VE5 had a problem since day 1 with the sound on my receiver DISH stall intermittently when using the HDMI ports. When you use the video input the sound works fine.
  I found the update of the firmware ER4.12 - E337.

  One of the things fixed is "Corrects a problem where an intermittent audio dropout occurs with a box of cable or satellite with the help of a HDMI connection"

  I downloaded the update and installed using the USB port on the service. The DISH receiver still works OK using the video input, but now if I use the HDMI input video and audio drop out intermittently about once every 2-3 hours. It lasts maybe 2 seconds then the HDMI info for entry appears in the top left of the screen briefly, then return audio and video.

  Not only does the DISH receiver, but now my Blue Ray Panasonic player features in the same way. It doesn't matter a HDMI port that I use.
  The update is here:
  http://eSupport.Sony.com/us/Perl/model-... ownloadTab

  Kind regards
  SD

  Hi Nicolas,.

  FYI, I experience the exact behavior even after updating the firmware, and I saw the same incident described in other forums, is not an isolated problem. I experience this problem with all HDMI sources: PS3, Xbox 360 and WOW! Ultra TV - box.

  I hope it's useful!

• The Xbox 360 controller connection

  Hi all

  I have my amazing Lenovo P70, that I really like. Everything worked without any problem, except my Xbox360 wired remote. I check with my keyboard USB, mouse USB USB OTG and USB flash key. All these devices work as expected.

  But when I connect my original Xbox 360 wired controller via the same dongle USB OTG, the four LEDs (player indicators) start to blink. Operating system does not recognize controller and I can't exploit office with the help of knobs and buttons.

  I also try to run "USB host diagnosis" (from gPlay) and here is the result:

  http://usbhost.Chainfire.EU/?search=1018316

  I have the version of android stock 4.4.4 kitkat

  Lenovo/P70-A/P70-A:4.4.4/KOT49H/P70-A_S134_150729_16G_ROW:user/release-keys

  I think the OS (android) are missing the necessary controller driver.

  Can you please help me solve this problem?

  Thank you

  John

  I solve this solution myself.
  Everything works beautifully.

  John

• WRT54G2 show me customers &amp; xbox 360 lag issue

  I just got a wireless router WRT54G2 about 2 days ago, and after having switched from Netgear, I badly due to find some settings.

  I have 3 computers on my network and 1 Xbox 360. One is one laptop (WiFi), the other 2 desktops (directly connected).

  They do not appear in the DHCP Clients. I get lag issues on my Xbox 360 and I want to see if its using the IP address I posted, since I'm portforwarding. I decided to go ahead and manually configure all computers to have a static IP address.

  If the DHCP Clients cannot be resolved, is there another way to see that if the Xbox is using the IP I assigned it?

  Triple post, oh gosh. I fixed it, well done linksys. I just updated the firmware, I just bought it didn't this necessary update already! But Portforwarding and UPnP are on, if all goes well no conflicts!

  Thanks for your GENEROUS response. :]

• Xbox 360 slim connect to the interface on WRT160N wireless - g

  Hello:

  I bought a new Xbox 360 Slim a month ago. Before that, in anticipation of the console to my new wireless capabilities I advanced and changed my old WRT54G (1.1) for a wireless-N router WRT160N allowed.

  When I plugged the console for the first time it was a nightmare to configure wireless settings... It wouldn't connect, in every possible way... And when I finally made a connection that he deleted just after 1 hour (I think it had something to do with the renewal of WPA key, if you must ask) I've updated the firmware and all was good again. BUT! It only connects to wireless-G... I have the router located on 'Mix', so she accepts my notebooks 802.11 G and my 360 Wireless N, but just, it detects the router mode G and connects like that...

  I tried EVERYTHING, but nothing works.

  It connects fine, I even get open NAT on the console and play online with no apparent problems, but I need Wireless N, because the router and 360 are too separate, and the signal is becoming weak. Also I usually stream 1080 p content so I need more bandwidth.

  I tried setting that "only wireless n" router, but then the console just does not connect, says he "can't connect to the wireless hardware.

  I could not test any hardware wireless-N, so I don't really know if it's the fault of the router, the console or is that just, they are not compatible...

  Any tips?

  Can't... My only two options are 'automatic' or 'only 20 Mhz'... :/ I can only change the channel on 20 Mhz. But thanks for the tip.

  EDIT:

  OMG, I can't believe it... It is NOT a malfunction N wireless network... This has to do with security... I had my personal WPA authentication method... According to joint works like a charm and everything connects, but the Xbox connect just the wireless G. Under Wireless-N only, it just does not connect. But I tried to disable security, and he comes to connect n wireless!

  Now, I switched to WPA2 Personal... it connects perfectly on Wireless N even if I set the 'Mixed' router and broadband radio and the way to the car.

  My problem is solved, however, I got to know is always:

  Why he doesn't connect WPA enabled?