SRV Win2k3 creating the new user at startup profile

Similar Questions

• Create the new user and remote access

  Hello, I create a new user from the admin panel. Now, I want to ask how my friend will have access to my nas also. He tries to connect from https://readycloud.netgear.com/ but it does not connect!

  I want to create some users and they can have access to my files from ther House. How can I do?

  I sin ready 102.

  Thank you

  Hi h_tsopelas,

  Please check this articleReadyCLOUD.

  I hope this helps!

  Kind regards

  BrianL
  NETGEAR community

• Created the new user account, and now the settings are gone.

  Accidentally, I created a new user in my previous account admin account, and now all of my settings are gone, as well as all the files on the first account. Is there a way I can return to my old account, or restore the files and settings? Either way, I run Windows XP. Help, please.

  You might be able to try a system restore to before you created the user account.
  Track information to restore the system in the KB article below:

  Article number: 2534454 - how to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/2534454
   
  I hope this helps.

• Restart the system created the new user profile

  When trying to connect to my laptop (before leaving), I have a blank screen with only a cursor before I could log on to the computer. I got tired of hitting CTRL alt del to get into the Task Manager, but he did not do anything.

  Then, I held the power button for five seconds to turn off the computer and restart it.  When he started upward, it showed an error that says the computer is not stopped correctly and on this screen, there are several options to reboot windows, I chose the option "restart windows normally" I could connect with my fine existing password, but when the windows actually open, my experience had changed and all my files are gone.  After some research, I found that all the old information of my were still there, but a separate user profile had been created and everything has been re-pathed to the new user.  The new user profile name was my existing profile name, then my name with a .pc at the end (ie. user name - username.pc).

  My questions are twofold: one) what the hell happened? and (b) what is the simplest to make everything re-pathed to my existing user profile.

  Thank you

  You have been put in a temporary user profile because the original was damaged. You can try the techniques below. If this does not work, let me know and I'll give you another path.

  Critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  If this is not the case, make the changes and try to connect as this user.

  More details of MVP Aaron Tiensivu - assume in this example that the user name is "atiensivu", field is "personal" and the user profile is located in % systemdrive%\users\atiensivu. Letter is usually C: on standard Vista installs. Replace each instance of "atiensivu" by the username of the corrupted profile.

  1. If you can log in profile, take note of the variable value environment % USERPROFILE. It will probably be "C:\Users\atiensivu" or "C:\Users\atiensivu.staff". Logoff.

  2. If you have opened a session with the profile at any time since your last reboot or you think that there are files in use in the profile, reboot. The important part is to ensure that there are no open files in the directory of the profile broke.

  3. log in as administrator or another account that has local administrator rights.

  4. run "takeown /r /a /d y/f % systemdrive%\users\atiensivu.

  5. starting at % systemdrive%\users, rename "atiensivu" to "atiensivu.old".

  6. in % systemdrive%\users, create a directory named "atiensivu".

  7 run "takeown/r/u staff\atiensivu/f % systemdrive%\users\atiensivu".

  8. run regedit and go to HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList and remove the SID key to the corrupted profile. Best way to find the correct SID is looking for the 'ProfileList' key to the directory mentioned in %UserProfile% in #1 step.

  9. closure of the session.

  10 log on the account "atiensivu". A new profile must be created. Copy all the files you can of the old profile directory.

  Orders "takeown" might be overkill, but I don't like permission errors.

  MS - MVP - Elephant Boy computers - don't panic!

• Question: How to create the new user and schema in 11g?

  Who can give me the answer how to create a new user and a schedule?
  
  I had installed oracle 11g DB and oracle in my OS windows client. I found in the 11g than there is no console management business with the new version. It is no different with oracle 10g. So I don't know how to create this new user.
  
  I had created a new DB instance, but I did not how to create a user on it. Who can give me a helping hand for who? I hope a give oracle experenice expert answers.
  
  Thank you very much!
  
  Published by: user774630 on October 27, 2008 22:01
  
  Published by: user774630 on October 27, 2008 22:09

  Hello
  I'm not sure which option you are talking about? [Do you use the EMCA, http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If this isn't the case, the command line that the other is using DBCA (Database Configuration Wizard). I think you're talking about that. Yes, if the message comes from creating the repository that soon after, you can connect to the EM. You would get the port no port HTTP of EM comes from the $OH/install/portlist.ini file.
  HTH
  Aman...

  Published by: Aman... on October 28, 2008 11:36
  Waived, insertion of link does not work.

• Cannot create the new user account InContext Editing

  Whenever I try to create a new account or someone that I invited to be an editor or a Publisher tent, we receive an unnecessary error message that says: "there was a problem trying to create your account.»  Please try again. "This happens after you have entered the name, address of e-mail and typing in the image verification code and clicking"Create Account ".  Tried on IE, FF and three different computers, before and after the deletion of cookies.  Does anyone know what causes this?

  Thank you

  Barry

  Hi Barry,.

  the InContext Editing service has expirenced some short downtime due to infrastructure problems and it is possible that you tried in the minutes...

  Now, the service is running. I just created an account and it works beautifully.

  Could you please try again see if it now works for you also?

  Thank you

  Diana

• When I create a new user, the profile is not stored in my regedit.

  When I try to log on to my computer under a different name, I get the error saying profile services cannot load profile. When I created the new user, and then restarted, I checked the regedit and the profile is not listed there. Why is it not save the profile of the machine?

  Hello

  The question is on the domain environment and the post would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Windows 8.1 did not create a user profile after creating a new user

  I was deeply puzzled by this problem.

  Just bought a MS Surface Pro 128 GB and upgraded to 8.1 Windows it works fine until I needed to create a new user. He is a user of child for my daughter with a local account only. After creating the new user account, I tried to logon. He complained "user profile Service does not have the sign in» Google it and found the solution to change the registry for the location of the profile displayed on many sites. So I launched regedit. But to my surprise, there is no entry for the new user to the profilelist title - there are only two entries: one for me (admin), and the other is for a user named "fwuser". So I couldn't use the method to rename the master for this problem.

  Could someone give me a tip, which could cause this problem and how to fix it? Much appreciate it.

  Hello

  Have you tried this fix, please try it out and tell us:

  http://www.kapilarya.com/fix-error-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded-for-Windows-8

  Hope this helps, good luck :)

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Remove the admin and create a new user without disc 10.6.5

  I got a new computer from a friend, family, which has expired.    I did not drive or Admin password, how do I remove the admin wipe and back in mobile by default so I can create a new user

  You will need the original installation provided with computer discs.

  Clean Install of Snow Leopard

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After charge OF select hard drive entry in the list on the left (mfgr. ID and drive

  size.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Logged, if supported), and then click the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. Once installation is complete your computer will restart in the Setup

  Assistant. After finishing Setup Wizard will complete the installation, after which

  you will use a new installation of Mac OS X.  You can now begin the process of updating

  at the opening of updated software and installing all recommend updates to bring your

  current installation.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

• the profile user account folder can be renamed instead of create a new user account

  I noticed this issue posted everywhere that none got the answer, the person posting was looking for.  Basically, the question is "can the folder of the user profile account be renamed? '...  I have the same problem.  I sent a PC in for repair.  They reloaded the operating system and created the new test user account.  Rather than just create a new user account, I've renamed the test NAME user account.  I couldn't help but notice later that user account folder name has remained the same "TEST".  That's why you have people to ask the question "can the folder of the user profile account be renamed instead of create a new user account."  It of an easy fix but does not answer the question.

  It is not usually. If you have a computer, why not have just him take care of it for you instead of friction top yourself? ;-)

  Try this instead if you really must do it yourself:

  1. create a new administrator account. Call it 'CompAdmin' or 'Tech' or similar. You definitely want to have an administrative user account like this set up that you will use not except for emergency situations. You will use this in the elevation of privileges in your daily report - which will be a Standard account - but will not need to connect to CompAdmin after that company copy unless something goes terribly wrong. ;-)

  2. create a new user account Standard for your daily work. This called something that makes you happy. I don't know your real name, so I'll call it "HDXer". Connect to HDXer to create the profile files/folders.

  3. connect to CompAdmin and:

  a. Control Panel > everything on the control panel > Folder Options

  b. click on the view tab, click hidden files and folders, clear the Hide protected operating system files check box and then click OK. Now you can see everything.

  c. using Windows Explorer ("computer"), search for the file C:\Users\Test.

  d. Select all files and folders in this folder, except the following files: Ntuser.dat, Ntuser.dat.log and Ntuser.ini.

  e. click on the Edit menu and then click on copy. If you don't see the Edit menu, press ALT.

  f. Locate the C:\Users\HDXer folder.

  g. click the Edit menu and then click on paste. If you don't see the Edit menu, press ALT.

  Sign out and then sign back in as a HDXer. All your stuff should be there. You need to configure your icons and wallpaper (Control Panel > Personalize) and some preferences have been postponed, but really with the exception of the email all your data, Favorites, etc., should now be at the HDXer.

  If you have messages in an e-mail program, such as Windows Live Mail, Thunderbird or Outlook, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. Because I don't know what you use for email, I can't give you the details about it. If everything is working properly, you can remove the old Test profile by using the user accounts applet in Control Panel. It won't hurt anything to make you leave the trial on the system for a while, or even forever.
  MS - MVP - Elephant Boy computers - don't panic!

• I can't create a new user account (Windows 7): the user profile service service has no logon

  I tried to create a new user account, but I get the following error when I try to open a session with him:

  the user profile service service has no logon

  Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.

  Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:

  HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST

  and delete the key associated with the user account to be deleted.

  This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user.  The new user account appears in the account management window.  If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.

  It is a huge problem.  I have other people who use this laptop and I don't want to use my login information, or the guest account.  I'm not editing the registry just to make a new account.

  Please tell me there is a fix for this that works.  Windows 7 was not free, and this kind of problem is very frustrating for the premium software.

  Thanks - this is the only tip that help me to find the solution to this problem.

  Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges.  This caused the connection in the attempt fail for all newly created user accounts.  The files are:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  I've added the read permission for all users in these two files and retried the logon.  The opening of session proceeded set up initial user and filled perfectly.  Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.

  Other important in your message board was to check the event log which stressed the two files which could not copy.  Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• How can I create a new user account any movement towards it and delete the old

  Win7 need to create a new user ACCT. move all the Info for it because want to rename the computer, and then delete the old user account

  To create a new user profile

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. Open a user account by clicking on the button start , by clicking on the Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on create a new account.

  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. Log on as a user other than the new user that you created or the user that you want to copy the files.

  2. Open Documents by clicking on the button start , and then clicking Documents.

  3. Click on the Tools menu, and then click Folder Options.

     If you don't see the Tools menu, press ALT.

  4. Click the view tab, click hidden files and folders, clear the Hide protected operating system files check box, and then click OK.

  5. Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all the files and folders in this folder, except the following files:

     • Ntuser.dat

     • Ntuser.dat.log

     • Ntuser.ini

  7. Click the Edit menu and then click on copy.

     If you don't see the Edit menu, press ALT.

  8. Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. Click the Edit menu and then click on paste.

     If you don't see the Edit menu, press ALT.

  10. Sign out and then sign back in as a new user.

      If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.

• Licensing procedure to create the table for the new user

  Hi all
  

  I have created one new User, and give GRANT CREATE SESSION TO USER. But after that from which grant, i would be able to create table and other object, specially for table.

  Thank you
  Brij

  The role of resource works in your case, as it consist from under privs

  grant resources to ;

  
  GRANTEE                           PRIV NAME
  --------------------------      --------------------------
  RESOURCE                          | CREATE CLUSTER
                                     | CREATE INDEXTYPE
                                     | CREATE OPERATOR
                                     | CREATE PROCEDURE
                                     | CREATE SEQUENCE
                                     | CREATE TABLE
                                     | CREATE TRIGGER
                                     | CREATE TYPE         
  

  Please close the message if you feel that you have the answer and to clean the Oracle forum.
  https://forums.Oracle.com/forums/Ann.jspa?annID=885