I can't create a new user account (Windows 7): the user profile service service has no logon
I tried to create a new user account, but I get the following error when I try to open a session with him:
the user profile service service has no logon
Until I leave than anything more I will add that I activated the hidden administrator account and this is the account I use to create a new standard user account.
Most of the patches for this issue are due to the fact that delete manually a user account does not remove the registry key that are associated, and you are required to go to the next section of the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENTVERSION\PROFILELIST
and delete the key associated with the user account to be deleted.
This fix IS NOT help, because whenever I try to create a new user, Windows doesn't bother creating a registry key to the new user. The new user account appears in the account management window. If I right click ondesktop and select Properties, then the settings , select the Advanced tab and click settingsunder USER PROFILES, the new account appears not here no more.
It is a huge problem. I have other people who use this laptop and I don't want to use my login information, or the guest account. I'm not editing the registry just to make a new account.
Please tell me there is a fix for this that works. Windows 7 was not free, and this kind of problem is very frustrating for the premium software.
Thanks - this is the only tip that help me to find the solution to this problem.
Two files in the folder C:\Users\Default\AppData\Local\Microsoft\Windows Live could not be copied without administrator privileges. This caused the connection in the attempt fail for all newly created user accounts. The files are:
C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm
and
C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm
I've added the read permission for all users in these two files and retried the logon. The opening of session proceeded set up initial user and filled perfectly. Probably, this problem started when I installed Windows Live Messenger which is the only Windows Live application, I installed.
Other important in your message board was to check the event log which stressed the two files which could not copy. Otherwise provided in WARNING messages immediately preceded files event log error message indicates that the profile service could not connect.
Tags: Windows
Similar Questions
-
I created a new Admin account and when I went to her, I got the message:
"The service user profile Service has no logon. The user profile Service failed to load.
What's up with that?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Hi guys,.
(I already tried this https://support.microsoft.com/en-us/kb/947215)
I have usually need two accounts on my system. I lent my laptop to a friend for a few hours and asked him to connect with the guest account but he got "the user profile service has no logon. User profile could not be loaded"error message. So I tried to create new accounts (standard and administrator), but nothing works. I am able to connect to my account but not to other accounts, I have create on my system. Pls help
OS: Windows 7 Home Premium
Hello Shashank,
Thanks for posting your query on the Microsoft Community.
I imagine the inconvenience that you are experiencing and I appreciate your efforts taken to solve the problem.
I suggest you refer to the suggestion of Nithyananda J replied on February 15, 2010 and check if that helps:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you
-
I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help
I had the same problem. Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked. Then I reinforced to the back and looked at the whole picture. It turns out that it wasn't a computer after all problem but a question of the user. Under folder C:/users/default in the end I managed to delete all subfolders except appdata. So when you went to create a new user he could not find the correct files to copy to the new profile to store information in. To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine. Of course I could create my comments and new users account once again. Finally. -
How can I solve this problem? I have Windows Vista.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Not able to connect to the user account, error: user profile Service has no logon
I'm on a HP Pavilion dv7 with Windows 7. I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon. User profile cannot be loaded. »
Where and how can I fix it?
Thank you.
Larry
Original title: need help with setting up an account
Hi Larry,
Thanks for posting your query in Microsoft Community.From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon
This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.
If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.
To resolve the problem with the user account, you can follow these steps:
Method 1:
(a) click Start, type regedit in the start search box, and then press ENTER.
(b) search for, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList(c) right click the SID that you want to remove, and then click on remove.
(d) log on to the computer and create a new profile.
You can also check this link:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Method 2: Also, see the steps in the following Microsoft article:
(a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.
If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.
(b) how to back up and restore the registry in Windows
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry(c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileFor any Windows help in the future, feel free to contact us and we will be happy to help you.
-
Can't connect! "The service user profile Service has no logon. User profile cannot be loaded. »
I can't log on to my laptop. I get the message "the service user profile Service has no logon. User profile cannot be loaded. "Can anyone help?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Original title: I can't connect to my admin account
Windows 7 - whenever I try to login on my admin acc it appears ("service user profile Service does not have the logon - user profile cannot be loaded") and do not know what that could have been and how to solve this problem, I have not tried anything yet if someone can please help me. I also connect to a standard ACC and cannot do anything because when he asks me my admin pass I put it in and nothing happens.Hello
This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
Run the diagnostic tool for Fixit for the article mentioned below and if it solves the problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Let me know if you need more assistance.
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: just changed password an hour ago. I can not connect.
Password just changed an hour ago. I can not connect. I don't have a password reset disk. When I type the password and press ENTER, the next page says ' THE SERVICE PROFILE has NO logon USER. USER PROFILE CANNOT BE LOADED. »
HelloThis error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
Try to connect to your computer from another user account and follow the steps listed in the article below.
Check out the following link and follow the steps to solve the problem:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Note: If you do not have any other user account the computer checks to see if you can boot to the desktop insafe mode , and then perform the steps listed.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
We get the error message "the service user profile Service does not logon, user profile cannot be loaded." Prevents us from entering the computer laptop-so how to solve this problem? Help?
Hi LisaPie,
Step 1: You can run the fixit available in the article below
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/If you cannot start the computer in normal mode, try the steps in safe mode with networking
Step 2: Start the computer in safe mode with network. To do this, follow the steps below:
Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error message: the user profile service has no logon. Profile of user was not found.
Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon. Profile of user was not found.
The user is locked. I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install. Peux-I re - install online? I have the product key.
Thank you
Joe R.
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
-
Error 1051: User profile Service has no logon
Mr President.
I use a real operating system Windows Vista Home Premium SP2 with my laptop Lenovo Y430. I have recently updated to SP1 to SP2 Windows Update online. last week when I tried to log in one of my user accounts, the above-mentioned error popped up on my screen. on further verification, I found that the "user account" does not exist in the c:\user\(account name folder). I could not find the same in the registry editor "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList".I've traveled all your forums to get help, including http://support.microsoft.com/kb/947215. even installed the "Microsoft Fixit" given on the same page, but it did not help. I even tried to restore my system to an earlier point.
In addition, when I tried to stop/restart the "user profile Service", the same mistake invited each time. but when I stopped/restarted the "user profile Service" after the removal of the user of the control Panel\User account account, the system didn't invite me with the error. and then; even after the service is restarted, and then creating a new user, I was unable to login with this user account.
now I find myself with a single administrator account to work with
Please suggestThank you in anticipation
Hello
Maybe this will help:
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in
Safe mode has no default password.Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
Earth) has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with
a temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
In Vista, get the error logon "user profile Service has no logon. Unable to load the user profile.
I can't logon and I get the notice. The user profile Service has not logon. User profile cannot be loaded.
PLEASE... HEEEELP.Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
user profile service has no logon
Just did an automatic update on my HP laptop with Windows Vista home premium (64-bit) and now I can not connect when I click on HP owner what happened to The User Service profile service does not have the connection. User profile cannot be loaded. I do not turn off computer when installing the new update.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
User logon denied-"the service user profile Service has no logon. User profile cannot be loaded. »
When I try to login, I get "user profile Service service has no logon. User profile cannot be loaded. "What does that mean? How did this happen and how to fix it?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Maybe you are looking for
-
Impossible to uninstall apps after updating to iOS 10
I need serious help with my iPad 2 Air which I recently updated to iOS 10. Apps can not be uninstalled. I already checked the restricted zone. I also tried all updates current stop and even switch to airplane mode. Whenever I try to keep an app for a
-
Kind of hard to explain in the title... who probably is meaningless. Basically, I used to use a BTinternet email for any account. But over the years, I went to my iCloud email account. I have both implemented in mail because I still have the BTintern
-
Windows 7 - error Code: 80070BC9 (could not install KB2398632)
I can't install KB2398632 (update for Wibdows 7 for x 64 systems). I tried several times. Restarting the computer does not work
-
Loading The C:\Windows\nswienT.dll module specific error could not be found Rundll
I have the error loading c:\windows\nswienT.dll... The module is not found Rundll... como error code appears when loading my system... is how doeds this way? will cause damage to my system... How can I fix it?
-
Installation driver for slave OS?
I have a question, my usb shipped from mothers does not (Yes, I'm sure) I only have USB ports, no PS/2 I opened the PC and there aren't housing PCI-E (x 3) not PCI I bought a PCI-E USB card, the problem is when I start PC I need keyboard or mouse to