SSH for Linux server to a Windows Server instance

Similar Questions

• automatic backup for linux server script

  HII
  We want auto backup script for linux server and after the end of the backup, we want it copy the .dmp file auto
  Since the database server machine via ftp.
  
  so please provide daily_bkp.sh as a script
  and daily_copy.sh to copy via ftp and to schedule a task
  
  Select * from version $ v
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  Thanks in advance
  concerning
  VIJ...

  You've already got the backup here script is script for the dump of FTP file

  On source, go to the directory the user oracle home and open the file called .netrc, if its not there, then create it.
  and add after the entry
  machine login password

  then do as shell script

  FTP-i - n - v "Serevr address."<>
  put "name with the path of the file.
  Good bye
  EXPRESSIONS OF FOLKLORE

  and the timing of this script shell at the time desired.
  This will put the dump file in the base directory to the target machine, you can use the cd before order was able to put the file
  given a place.

  Kind regards
  Swastika.

  Published by: swastika on February 13, 2010 03:13

• Loading a flat file for Linux server

  Hi all
  I ask that my previous question otherwise. I need to load flat files in a directory on a linux server. ODI is installed on a windows machine. I created the physical components of the architecture of FILES / logic and I test the interface with a small file. I am receiving an error message = "file not found". Questions:
  1. do I need an agent of ODI on the linux server to achieve this?
  2. in the definition of the data to the FILE Server I inclulde host / username / password and it successfully tested. Was it necessary? I only did this for my windows files.
  3 understand #2 above, when defining the physical schema, I have included the host name. Is this correct? Since it is Linux the slashes go in the other direction - Yes? [I know it's a stupid question].
  
  I am sure that the file exists. All recommendations are much appreciated!

  1.) Yes, you need an agent on linux to achieve this. Or create a samba share that allows you to access files on windows linux
  http://askankit.blogspot.com/2009/02/step-by-step-guide-to-install-Oracle.html
  (2.) no it's not necessary for a base file of dataserver. These details are necessary for a DB according to technology.
  (3.) the host name is not necessary. It is governed by the location of the agent. If the agent is at the ABC's of the machine, then the host is ABC.

  In ODI, the agent is a server and ODI installed on your windows machine is just a client that connects to the server to perform the work.

• Download Firefox for Linux without Adblock and other extensions

  I have a problem downloading of an adapted version of Firefox for Linux to run on a Knoppix Live DVD system, for use in the trial publishable extensions I developed under Windows. (This isn't a development question extension, however, just a problem downloading and the FF configuration properly).

  I was surprised as the current (FF40) and anterior (FF34) version for Linux come with 3 extensions installed permanently - NoScript, Adblock Plus and FoxyProxy Standard. They apparently cannot be uninstalled, even if they can be disabled.

  I read online in various forums that Adblock Plus is a hog memory and that she, in particular, as well as NoScript, may adversely affect the values with legitimate code on Web sites and extensions. I also read complaints from users who disable Adblock Plus does not remove all its effects.

  During my tests I had problems that I thought were the result of Adblock Plus, so I turned off and restart the browser. The situation is greatly improved, but there are still some problems that may or may not be related to the shortage of memory.

  The question is this: I want to download versions 'clean' FF for Linux without these extensions part 3 installed, for more conclusive tests, but have not found a way to do it.

  I'm also curious as to why these extensions are 'forced' on Linux users. (I hope that never happens on Windows, or I could become a less committed user of the FF).

  Firefox any version for Linux, Mac OSX and Windows www.mozilla.org or www.mozilla.org/firefox/all doesn't come with all Extensions.

  You already had these extensions installed in Firefox profile, you use with Firefox.

  All three of these Extensions are by a third author (s) and not by Mozilla.

• CVI for linux and gtk +.

  Is it possible that I can manipulate the settings of window user interface as titlebar visible (ATTR_TITLEBAR_VISIBLE) via GTK + or another Toolkit on Linux?  Basically I'm manipulating the Visual attributes of the user interface that are not compatible with Linux such as the visibility of the title bar, minimize and maximize buttons hidden, etc...

  In windows, I used the windows SDK to create/manipulate the system tray icon menus.  There may be a similar approach under Linux?

  Thanks for reading,

  -pete

  Hi Pete,.

  After a little more research, I found that it is possible to change these attributes, because CVI for Linux uses the X Window System. To do this, you would be able to get a reference to the X Window System attribute by using the function int GetPanelAttribute (int panelHandle, int panelAttribute, void * attributeValue) with ATTR_SYSTEM_WINDOW_HANDLE for the panelAttribute. From there, you can use X Window System functions to change the properties.

  Best,

  John M

• Connect to Oracle Server(windows 2003 Operating System) to the Linux server

  Hey,.
  I've been a job of Director Oracle for Computer Science Dept (at University).
  Part of my job is to install Oracle 11 g on a server that has windows 2003 System.next of operation is to connect to the Oracle server through the server.and of Linux and then create accounts to other students and grant privileges.
  
  
  
  I finished installing on the windows 2003 server.
  The next part, to connect to the Oracle server via the Linux server. I have access only to the Oracle (privileges) server but not on the Linux server.
  
  I'm unable to connect to the Oracle server via the Linux server.
  
  Could someone point me in the direction or recommend any hardware to connect to the Oracle server via the Linux server. Please I need help.
  Thank you.
  
  Published by: user12379367 on December 22, 2009 19:46

  >
  Thank you very much, I want to just connect to the server Linux Oracle database.
  But I couldn't connect to the Oracle Server Linux server using ssh.
  >

  SSH is not a technology allowing to connect to databases.

  You will need to install an Oracle client on the Linux server, implemented a tnsnames.ora file that includes the necessary connection information for the database of Windows Server.

  See the Linux 11 g Client install Guides here - http://www.oracle.com/pls/db111/portal.portal_db?selected=11&frame=

  Then read through the 11 g Net Services (http://download.oracle.com/docs/cd/B28359_01/network.111/b28316/toc.htm) Administrator's Guide for an overview of connectivity.

  HTH
  Srini

• With the help of Remote Shell of Linux to run on Windows Server 2008R2 .bat files

  I use rsh to my Linux server to run Windows applications on a Windows 2003 server using .bat files remotely.  For example, from Linux:

  rsh win2008s.enterpisedomain.com D:\\appdev\\atm_ally\\bgr_atm_ally_standard_pip.bat ${PINSTANCE} {IVSWEBBROWSERUSER} ${PPASS} ${DINSTANCE} ${DUSER} ${DPASS}

  I want to be able to rsh to a Windows server 2008R2.  I installed SUA and the SDK and utilities.  I also installed the patch from this link:

  https://support.Microsoft.com/en-us/KB/2360829/en-us

  When I try to run the same command on Win2008R2, I get the following:

  RSH: D:appdevatm_allybgr_atm_ally_standard_pip.bat: not found

  I also tried to change the content of the file bat in the Unix syntax, following the signs to help SUA.  The following text runs if I use rlogin and run interactively, but fails to run using remote shell (rsh):

  #! / bin/ksh
  export PATH=/dev/fs/C/instantclient_12_1:/dev/fs/C/Windows/SUA/bin:/dev/fs/C/Windows/System32:/dev/fs/C/Windows:/dev/fs/C/Windows/System32/wbem:/dev/fs/C/Windows/System32/WindowsPowerShell/v1.0:/dev/fs/C/Program Files/FME2011:/dev/fs/C/Windows/SUA/common:/dev/fs/C/Windows/SUA/usr/lib
  export PATH_WINDOWS=/dev/fs/C/Windows/System32/.com,.exe,.ksh,.bat,.cmd,:/dev/fs/C/Windows/SUA/common/.com,.exe,.ksh,.bat,.cmd
  ' / dev/fs/program/C Files/FME2011/fme.exe ' E:\\appdev\\standard\\standard_pip.fme--BndTab BOUNDARY2015. BND_01_DMA - BndInst DWSTG - BndU atm_ally - edwat56c1 - BndIDCol GEO_ID - BndDType PBED ' VARCHAR2 (25) ' PntTab - V_ATM_JAN15_GEOCODE - PntInst DWSTG - PntU ATM_ALLY - edwat56c1 - PntID ID - PntIDType PntP ' VARCHAR2 (8) ' - PntLat N_LAT - PntLng N_LON - PntLatType "NUMBER (10.6)"-PntLngType "NUMBER (11.6) ' DestTab - ATM_JAN15_DMA - DestInst DWSTG - ATM_ALLY - edwat56c1 - NearDist DestP DestU 0 - Logfile 'test2.log '.

  using rsh:

  rsh win2008s.enterpisedomain.com /dev/fs/E/appdev/atm_ally/test_pip_win.ksh

  remote shell fails with the error:

  ' / dev/fs/C/Program Files/FME2011/fme.exe "no such device

  Anyone have any ideas?

  Your query is better here

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• Windows 7 - cannot get the IP address of the DHCP Linux server

  I have several desktop computers and portable computers that have the Windows 7 operating system.  Some have Windows 7 Starter, Windows 7 Home and Windows 7 Professional.

  My network is configured like this:

  Desktop computers > switch > DHCP Linux server > router > Internet

  Laptops > wireless bridge > DHCP Linux server > router > Internet

  Windows 7 Professional does not appear to have a problem with my set up.  It can enter an address IPv4 automatically, wired or wireless.

  Windows 7 Starter and Home cannot obtain address IPv4 correctly, wired or wireless.  If I give the static addresses of these computers, they can access the internet.  If I let them as dynamic, they will constantly try to connect and try to Identifingtwork.

  I want to get my Windows 7 start and home computers to enter dynamic IPv4 addresses of my Linux DHCP server.  Note, I have never had any problem with Windows XP Home or Pro.

  Hello
  
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the TechNet Windows 7 networking forum.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Steps to update of JRE or JDK in Linux Server for EBS 12.1.3

  Hello

  1. Is there a document that I can return to order updated JRE or JDK in Linux Server for EBS 12.1.3 for me?
  2. If it's an environment of multi nodes, do I need to update on every single node?
  3. Here is the output of the command 'java-version'

  Java version "1.6.0_24".

  OpenJDK (IcedTea6 1.11.1) runtime environment (rhel - 1.45.1.11.1.el6 - x86_64)

  OpenJDK 64-bit Server VM (build 20, 0 - b12, mixed mode)

  If I want to update to the latest java which is 1.8.xxx do I need to install the version 1.7.xx first?

  Thank you and best regards,

  Nadhrah

  Hello

  1. Check these documents:
     Using the JDK 7.0 updated with Oracle E-Business Suite version 12.0 and 12.1 (Doc ID 1467892.1)
     Deployment of JRE (Native plug-ins) for Windows customers in Oracle E-Business Suite Release 12 (Doc ID 393931.1)
  2. Yes
  3. It is the Java software that comes with the operating system. It is not used by EBS.
     JDK 7 is the version the most recent can be used by the application and database layers.
     JRE 8 can be used with the client tier.

  Kind regards

  Bashar

• Download link for vCenter Server Appliance (Linux)

  Hello

  I have the following situation: we bought VMware this week for our internal servers and want to administer the virtual machines with Linux (and only with Linux).

  I downloaded VMware-vCenter-Server-Appliance-5.1.0.10000-1065184_OVF10.ova and imported this virtual machine. I can now administer all our virtual machines within a browser running on a linux client.

  This virtual machine is running SUSE Linux Enterprise 11 (64-bit) and I would like to download these packages install to put in place a dedicated linux server (vShpere Web Client Version 5.1.0 build 1063329, customer-integrations-Plug-Ins: VMRC Version 5.1.0 Build 1060398 and Support Client Version 5.1.0 Build 832030)

  I downloaded tons of ISOs and OVF from VMware today but found nothing to install on a Linux server dedicated (except these tools of comments).

  Can we put a link or give me a clue where to download or in what ISO is?

  And another question is: is it possible to install

  Thank you

  Bernd

  The Linux version of vCenter Server is only available as a Virtual Appliance that you downloaded and not as a separate package such as the version of Windows.

  André

• Install PeopleTools 8,53 Linux question: Windows Client and Linux Server suite

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually using Starter named PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  Then, we perform Data Mover script in a Windows Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.
  I have installed Oracle Database 11 g 2 client for 32-bit Windows in my Windows XP 64-bit. The installed directories are below:

  Server Linux machine:
  Oracle_Home: / home/user/OracleDB_Home
  ORACLE_BASE: / home/user/OracleDB_Base
  PeopleTools 8.53: /Linux/PT8.53

  Windows XP Client computer:
  Oracle_Client: /OracleDB_Client_Install_Directory
  PeopleTools 8.53: /Windows/PT8.53

  
  What machine installed PeopleTools 8.53 in customer Windows, it is a step:

  Select the location of the connectivity program directory:

  What directory to select? We select the directory ' / home/user/OracleDB_Home "on Linux?
  Oracle Client tools in Windows XP "Start" menu is used to connect Windows XP with Linux?

  Thank you.

  The answer is «Yes, they use the tools of the Oracle Client installed on Windows XP.» The longer answer is that these client tools communicate with the Linux using TCP/IP database, etc., and exclusive Oracle TNS 'protocol '. This network communication usually occurs on port 1521, but you can configure your server to database for listening on different ports. Alternatively, you can do all kinds of fun things with forwarding port, tunnels, VPNs, etc. for the use of different ports and security protocols. There is much more than that, but basically these Oracle client tools provide utilities communication (drivers) used by PeopleSoft to connect to the database on Linux via the network.

• RMAN backup Linux drivers shared on windows 2008 Server.

  Hi all
  
  I want to know is - it possible to rman backup to shared disk windows 2008 for a database of runnig under Linux.
  
  I tried it and getting rman-03002 followed by ORA-19504, error Ora-27040 and linux-x86_64.
  
  I used the following command to mount my windows share
  Mount-t cifs/o username = administrator, password = "XXXXXX" //172.16.1.50/files/MNT
  
  
  Concerning
  Nidsh
  
  Edited by: 883687 August 15, 2012 23:08

  Hello;

  It should be possible. The ORA-27040 is

  "O/S-Error: (OS 3) The system cannot find the path specified."
  

  and the second error ORA-27040 seems to be an effect of the first.

   File create error, unable to create file
  

  Could be a permissions problem, so if you can mount the disk space windows, but cannot write to it (yet)

  There is a note of support Oracle that covers this:

  ORA-19504 ORA-27040 during Rman backup in a Directory Windows mounted under Linux [464267.1 ID]

  Which confirms, in my view, the answer is Yes.

  Further that:

  RMAN fail with ORA-19504 ORA-27040 when backup remote server linux [726858.1 ID] Windows Mount Volume

  Best regards

  mseberg

  Published by: mseberg on August 16, 2012 04:33

• 11 driver ODBC Microsoft® for SQL Server® - Windows - files not available

  It seems that the files are not available...

  Microsoft ODBC Driver for SQL Server® - Windows 11

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=36434

  When I go to this URL - click on the one that I want - no download works.  I tried a couple of computers different and various internet connections.  Doesn't seem to be a firewall / the problem linked to the internet.

  It seems that files no longer just on Microsoft servers.

  Any other place I can get these from?

  Thank you!
  Jeff

  Jeff

  It seems to be a systemic problem with this exact problem.  I reported it but no answer yet

• I use a server DNS Server 2008 and need to transmit the DNS lookup on a Linux server that only allows you to Port 3128 for DNS.

  Hello

  I use a server DNS Server 2008 and need to transmit the DNS lookup on a Linux server that only allows you to Port 3128 for DNS.

  How can I configure my DNS server to use this port for shipments?

  Thanks for your replies

  Marcus

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/threads
   
  Here are a few Server DNS forwarders. Links for refrence,
   
  http://TechNet.Microsoft.com/en-us/library/cc754941.aspx
   
  http://TechNet.Microsoft.com/en-us/library/cc731991.aspx
   
  I hope this helps.

• How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?

  1. How to maximize the number of RDP session for Remote Desktop connections in windows 2008 server?
  2. By default, the system says 2. and to not change/increase.
  3. is everything permissible special necessary to buy?
  Hello
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to maximize the number of RDP session for Office remote connections to the server. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.