SSL works only with 10.3 and jdk 1.6.0_13

Similar Questions

• Microphone works only with Windows 7 and StarCraft 2

  I have Windows 7 64 bit is installed on a computer HP Pavilion Elite (HP-M9600T), and I'm having problems to make my microphone to work with Windows 7 and Starcraft 2 (SC2).  The strange part is that I have an old analog microphone that works, but it's quality is very bad.  I bought 3 or 4 new microphones (some analog other USB) and none of them have worked.  I tried standalone and headset microphones.

  Whenever I tried a new micro, I went in the 'Sound' Panel and check that the microphone is not muted.  I check that the microphone level is high (and if mic boost is available I assure me that it is also at the top).  Then I test the microphone via the 'Listen to this device' feature in the properties of Microphone Panel and can hear my voice through my speakers when I talk.  I also see the green bar on the acoustic Panel fluctuate everytime I speak.  However, no one can hear me when I play StarCraft 2 unless I unplug the new microphone and plug the old microphone.  StartCraft 2 settings are configured to use the default device and StarCraft 2 also has a test feature of "Listen to this device" and I can hear my voice through the speakers.  Just like in the sound Panel, when I speak I can see the Soundbar of StarCraft 2 fluctuate in recognition of my voice.  However, only the old work of mic.  If my old microphone had a mute and better quality, I would ignore the problem.  However, this is not so I would get a new mic work.

  All the drivers seem to be up-to-date and indicate that they are working correctly.  I uninstalled and reinstalled StarCraft 2.  I also reinstalled Windows 7.  I used two generic drivers and installed the drivers RealTek supplied with my machine.  The two sets of drivers give me the same result.  I thought they might be in conflict, so I uninstalled the RealTek drivers, but I got the same result.  Teh generic drivers recognize my mic fine, but no one can hear me.  Any ideas?

  

  Hi tlonni,

  You can try the following steps and check if it helps to solve the problem.

  a. Click Start, click Control Panel and then double-click sounds.

  b. in the sound dialog box, click the recording tab, click on the microphone and then click Properties.

  c. click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral checkbox and then click OK.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hot spot doesn't work only with I Phone and other devices Application Compatibility

  Point hot apperas to work and show my iPhone as a user, but I can't access the internet with the phone?

  Hello

  Thanks for posting your question in the Microsoft Community.

  You can check these links:

  iOS: Troubleshooting Personal Hotspot

  http://support.Apple.com/kb/ts2756

  iOS: Understanding Personal Hotspot

  http://support.Apple.com/kb/ht4517

  If this does not help, then contact Apple support team.

  http://www.Apple.com/contact/

  It will be useful.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? Every month I pay an amount for PS and LR...

  After the upgrade to Windows 10 Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? I bought the license more than 1 year ago. Every month I pay an amount for PS and LR, and for the past 4 months I can't work. Russian support team cannot solve this problem and sent me here.

  Thank you! I reset my password, the problem was in it.

• External speakers work only with powerpoint.

  External speakers work only with powerpoint. DVD, internet, music files, are not. They worked for the first few weeks.

  I have a HP dv7-6c27cl with intel core i5 and Windows 7.

  When I have the system check it, it finds no problem.  Apparently, I have the latest drivers. The fact that the speakers work with powerpoint, which is confusing.

  When I play a video file or music, I get an error message: "Windows Media Player has encountered a problem while playing the file."

  The headset works for internet but not DVD.

  I've installed Weatherbug a week ago and had to uninstall other garbage that come with it. I think that's when the problem started.

  Well, I set myself just now. I did a system restore to a point before that I installed Weatherbug, and now everything's fine.

• OKI Microline 184 Turbo printer works only with Windows 2008R2

  For Windows 2008R2, the test page is printed with the missing lines and introduces some corrupt characters.  Only 75% of content printed ok.  The printer works fine with other pilots and BONES.

  Hi mikechange,
  The question you posted corresponds to the Windows Server forums and would be better suited in the Technet forums. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads 
  Hope this information helps.

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• Adobe Acrobat dc works only with Microsoft office 2016

  Adobe Acrobat dc works only with Microsoft office 2016

  Hey Nick Villani,

  Desktop stand 2016 for Windows and MAC OS versions of Acrobat DC will be available in the next major update quarterly Acrobat, tentatively scheduled for October.

  Kind regards

  Ana Maria

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• Why is the hitTest function works only with attachmovie?

  Hello.

  I need help. I can't get the hitTest to work for my script below.

  I tested using movieclips created on stage at design-time and collided during execution. hitTest, works very well in this situation.

  But if I use the attachmovie command and create a movie on stage during the performance, the video cannot hitTest with other clips. The hitTest just doesn't work.

  Please help me by recommending changes. I don't know what to do. It is not that difficult.

  Thank you.

  -Aslan

  """"""""""""""""""""

  The script below is essentially to create instances of enemymc, and he will fall vertically, hitting a movieclip target_mc which is set at design time. Please help, out of ideas.

  """""""""""""""""""""

  var enemyTime:Number = 0;

  var enemyLimit:Number = 20;

  onEnterFrame = Function)

  {

  enemyTime ++;

  trace (enemyTime);

  if(enemyTime == enemyLimit)

  {

  var enID: Number = Math.Random ();

  enemy_mc = _root.attachMovie ('enemymc', 'en' + enID, _root.getNextHighestDepth ());

  ["fr" + enID] _root ._x = int (Math.random () * Stage.width);

  _root ["fr" + enID] ._y = - 5;

  _root ["fr" + enID] .onEnterFrame = function()

  {

  var chk:Boolean = false;

  var currMov:MovieClip;

  ce ._y += 5 ;

  currMov = this;

  if (this.hitTest (_root.target_mc, true))

  {

  trace ("the enemy detected a success.");

  }

  if (this ._y > (Stage.height - 10))

  {

  this.removeMovieClip ();

  }

  }

  enemyTime = 0;

  }

  }

  If you have two targets mc then they must have different instance names and you must hitTest for each of them.

  If (this.) HitTest (target_mc1) | this.hitTest (target_mc2))
  {
  trace ("the enemy detected a success.");
  }

  And if you need to deal with them in different ways depending on who gets the success, just use two separate tests.

  As far as why my way and not your way, I have to be honest and say that I spent time trying to get your way to work and by trial and error, I ended up with, that's what you see.  I thought that the biggest change took place (which means he started work) when I changed the hitTest to not include the "true" setting, which I think is applicable to the use of corrdinates, and not an object.  But when I started your code and changed only this line, it still does not work, so something else in my revised code also applies.

  I didn't like using the random calculation for falling objects, which may have been part of the problem.  That will produce a fractional value with a point decimal, and names of the instance with dots in them are probably an accident waiting to happen (ex: en0.27365514)

  If you want to know what changes were absolutely necessary for its work, start with your code and the hitTest change first and then see what must be done to get things working properly.  I was tempted, but I had other things I wanted to do, so I got what I got the job.

• Is - this calculation Manager works only with EPMA?

  It seems calculation Manager works only with EPMA for the application of the classic plsnning, I cannot use the module of business rule and cannot use the Manager of computing to work on business rules, is good? correct me and advise, thank you!

  Sorry I disagree

  You can use the calc for classic version 11.1.1.3 planning
  When you create a planning application in 11.1.1.3 classic, you have the option to choose if you use business rules or calc for the app Manager.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Windows 7 works only with canon MX 340

  Canon MX 340 printer works only with windows 7.

  Canon MX 340 printer works only with windows 7.

  You mean the Canon PIXMA MX340?

  You have the following drivers installed? :
  http://www.USA.Canon.com/nw3s/CanonUSA/DownloadContents/English/0100461601EN.htm
  (As of 10/23/12)

• I have the code for an Adobe Creative Cloud, it is alphanumeric, but the registry works only with numeric codes ¿where I can use my code?

  Hi, I have a problem with code for my Adobe Creative cloud, it is alphanumeric, but the registry works only with numeric codes ¿where I can use my code? is a subscription to creative cloud of throughout the year.

  Probably you have a redemption code... especially if you did not purchase directly from Adobe

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  -or https://forums.adobe.com/thread/1572504

• This calculator works only with round numbers

  I need help,

  This calculator works only with the numbers series, but is this 1.9 * 6 the result is 11.399999999999999 instead of 11.4

  Ware is the problem, can it be resolved?

  Theanks in advace.

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:Application ' xmlns:mx = ' http://www.Adobe.com/2006/MXML "layout =" " vertical " >

  < mx:Script >

  <! [CDATA]

  private function getTotal():Sub

  {

  var myInt:int = parseInt (input.text);

  var myFloat:Number = parseFloat (input.text);

  var myNumber:Number = new Number (Input.Text);

  var myInt2:int = parseInt (input2.text);

  var myFloat2:Number = parseFloat (input2.text);

  var myNumber2:Number = new Number (INPUT2. (Text);

  total. Data = (myNumber) * (myNumber2);

  }

  []] >

  < / mx:Script >

  < mx:TextInput id=" entry " />

  < mx:TextInput id=" INPUT2 " />

  < mx:TextInput id=" total " />

  < mx:Button " label = ' Button "click ="getTotal ();" />

  < / mx:Application >

  Welcome to the joys of IEEE 754 floating-point arithmetic. For more fun, try ".1 + 1 - 1»

  The simplest answer is probably to limit your result with Number.toFixed (). The answer is not so easy is to write your own class BigDecimal (in Java).

  --
  Maciek Sakrejda
  Truviso, Inc..
  www.truviso.com
  Truviso recruiting: http://www.truviso.com/company-careers.php?i=87