SSM-IPS40 new show 50% CPU without traffic
We are poised to deploy 2 ASA 5585 s with SSM-IPS40 modules. IDM reports 8 CPU 100% usage for a total of 50% of the CPU usage. IDM it brings by mistake? I'm not finding a way to check on the CLI. There is no traffic through these devices at the moment.
Thanks in advance for any help.
Dennis
From engine E3 updates, the IPS uses a different algorithm to manage his idle
time and spend more time vote to reduce the latency of packets. Changes included E3, one
Difficulty with a problem with a latency during low traffic loads. The fix was to have sensorApp
Check buffers packets on the driver more often. So the package could be removed from the
queue the fastest rider for analysis rather than wait for the pilot fill the queue
before you pass it to sensorApp. This increased audit results in an increase in
CPU usage.
The measurement of the CPU usage can / will be high, due to the amendment to
E3 engine, remote sensing interfaces for more polling data. It's OK like if/when the
sensorApp process requires more time CPU, the amount that is using the mark is
scaling dynamically to useful to determine the actual workload of sensor.
So don't worry about the HIGH CPU but check the percentage of overhead on the IPS.
Please report if there are still unanswered questions.
,
Sachin
Tags: Cisco Security
Similar Questions
-
Can I install a new motherboard and CPU without reinstalling vista?
My PC currently consists of...
Operating system: Microsoft® Vista Ultimate (32 bit) with all updates installed
--------------------------------------------------------------------------------------------------
Motherboard: Alienware® PCI Express (Abit AA8XE) motherboard with Intel® 925XE Chipset 1066/800 MHz FSB
Proccessor: Intel® Pentium® processor 4 560 w / technology HT 3.6 GHz, 1 MB Cache
--------------------------------------------------------------------------------------------------
Memory: 4 GB Dual Channel DDR2 SDRAM at 533 MHz - 4 x 1024MB (current "Bios" recognizes only 3096MB)
Graphics processor: NVIDIA GeFrorce 8800 GTX OC Express 756 MB DDR3 X 2 digital output
Sound card: Creative Sound Blaster® X - Fi XtremeGamer high definition 7.1 surround sound Firewire (IEEE® 1394)
System drive: Western Digital Caviar Black 1 to/32 MB Cache SATA3
Optical drive: NEC® ND-3500 16 x dual layer DVD±R/W recorder
Network connection: built-in High Performance Gigabit EthernetI intend to replace the card mother and CPU with...
Motherboard: XFX nForce 750i SLI Extreme Motherboard - NVIDIA nForce 750i, support 45nm, Socket 775, ATX, PCI Express 2.0, SLI Ready, Gigabit LAN, S/PDIF, USB 2.0, Firewire, SATA, RAID
Proccessor: Intel Core 2 Quad Q6700 HH80562PH0678MK - 2.66 GHz processor, 8 MB Cache, 1066 MHz FSB, Kentsfield Quad-Core, OEM, Socket 775, processorIs there a way to pull this off with on the reinstallation of the operating system? This post http://arstechnica.com/hardware/news/2007/09/how-to-install-a-new-motherboard-without-reinstalling-windows.ars looks promising, but not specifically for Vista.
I don't have a Vista DVD that I bought the upgrade online. I have it on a spare SATA drive and can't burn on a DVD because for some reason any damned, it is slightly larger then what fits on a 8.4 GB DVD. I have a disc XP full version. The current installation is a clean vista who, for now, I forget exactly how I managed, but I remember that you can do a full install with upgrade to vista as long you have your original cd of XP handy.
Hello Sqrly,
All you can do is try. It's 50-50 if you try to fix the MBR (master boot record). If this does not work and clean install will be your only option. If I were you, I would like to do a clean install. You can download this ISO (Vista) link:http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ but the use of this software to burn your ISO. Link: http://download.cnet.com/Active-ISO-Burner/3000-2646_4-10602452.html?tag=mncol, let us know if this allows you to get your drive. Follow the instructions. Try to repair your windows MBR with this disc. If it isn't you may have an option to make your recovery partition recovery disks or you must contact the manufacturer to buy them for a small fee. Very nice MOBO you got there by the way! ;-) Let us know whether, if that helps you. Make it a great day!
"In the end, the love you take, is equal to the Love You Make"
-
New motherboard and CPU... Running slow
The back story:
First let me preface this by saying: "I don't know much about computers. OK, with that of the road, I have a Presario SR1703WM under XP. I added two gigs of memory a couple of years and it was running fine for what I needed.
About a year or two back... It got to where I could not close without waiting a long time to get it to even start upward. I was told that the phones went wrong. Anyway... the food has recently taken a dive. I replaced it, but the computer had apparently had inhaled, it is the last and sang with the choir invisible.
I decided to fix it myself and in the process, destroyed the CPU... He looked like a little in the wake of a 747 crashing in a field of culture.
A friend IT just happened to have a new motherboard and CPU which it replaces for me (God have mercy on its processor)
The Situation as it is:
The computer came back from the dead, but he is running a bit slow sometimes. It is not constant. It seems to happen on Yahoo mail and when I watch Youtube videos or when there is a site with a kind of animation advertisemens. Yahoo email who has a little. PC Doctor 5 for windows came with the original computer, but now she says that she is not allowed now... not really a problem, but running a dignostic there will not happen. Compaq diagnostics is not upward in case of problem either. The slowness is erratic, even in the same session. It can correct itself and return to normal. It seems to happen when I have more than one high screen... like if I can access Yahoo email on one screen and I do appear Facebook on another at the same time.
Memory is adequate
Controls for Device Manager shows all my drivers are up to date.
The new motherboard is an Elitegroup P4M800PRO-M he came with an instellation CD
The new processor is an Intel Pentium 4. (He had an AMD Sempron before hand).
Please be patient with me and use it as simple as possible when replying with advice... I do not understand a lot of technical terms... but I'm learning.
After hours of slope on this problem... It seems that the culprits were Yahoo toolbar and Adobe Flash 9. At least it works a lot better now. We'll see if it continues to do so. Thanks to everyone who took the time to help. I appreciate it. Kudos to you all.
-
I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?
Try this procedure
Cancel the twinning of your iPhone - Apple and Apple Watch Support
-
Why isn't my old watch backup appear in the list when you set up the replacement or new shows?
Why isn't my old watch backup appear in the list when you set up the replacement or new shows?
I've been upgraded to a new watch, and during the installation of my phone would not offer a restore of backup. The problem is that the factory OS on the new watch was 2.0.1 while backup of my old watch watch OS 2.1.
I had to implement the new shows like new, then update the OS 2.1, désapparier it and pair it again. It gave me the option to restore the backup of the original watch origin.
[Must be like the iPhone backups, you cannot restore a backup of a newer operating system that the phone is running.]
Hello
Yes it is true backup must be the same ios
See you soon
Brian
-
How can I top up my new ipod touch 6 without mac or pc?
How can I top up my new ipod touch 6 without an update mac or pc? I use a laptop Toshiba Chrome. Mac OS is too old to update. and PC has Vista.
Also need a copy of the manual to use/users.
Thank you.
You can always load and synchronize with Vista (and XP
XP and Vista require iTunes 12.1 you get here:
12.1.3 iTunes for Windows (32 bit)
12.1.3 iTunes for Windows (64-bit)
For the load only you can buy a charger from the wall outlet that has a USB port. Yu can get everywhere
-
Original title: Task Manager
Manager tasks shows my CPU 100% usage but when I go to the processes tab and sort by CPU usage there are only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%. What else is using my system resources that is not displayed by the Task Manager?
Click Show processes from all users . There may be other systemic processes and processes that run under other accounts.
Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]
-
My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?
My current C:\ Size of the drive is 500 GB (I shrunk it once).
Thanks for help.
See the following topics:
http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/
-
My processor and motherboard in my computer are broken. I need to install new hardware, but I have an OEM of Windows 7 Home Premium version. Is there a way I can install the new hardware and start without any problem the reactivation of Windows 7?
Non - OEM license is locked to the original motherboardm and may not be transferred, except when the change is made in conditions of warranty.
You will need to purchase a new license for Windows.
-
How can I move live sites hosted in BusinessCatalyst of composition creative cloud for a new creative cloud membership without using the partner or partner codes portals?
I don't think you can but your best bet is to contact the support of the BC and see what they can do.
-
I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my own serial number adobe can give me a link or any suggestion for me? ! Thank you very much
Download through the page linked below and use the serial number, you need to activate it.
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
-
Publish the application fails for our new show.
Publish the application fails for our new show. What is the problem of service or subscription? How will I know?
Thank you.
He was neither.
Reconstruction of the folio and the Uploader again solved my problem.
-
How to create the new Custom XML report without the use of the form builder
Hello
What are the steps to create the new Custom XML report without using the Report Builder?
Thank you and best regards,
AertsAerts,
Can you clarify your question more away!-bifacts
http://www.obinotes.com -
Hey guys...
Hoping that someone else noticed this. I have a host that is running with a release of U4 freshly updated three virtual machines running. One of the three shows a CPU usage abnormal on customer VIM graphics, but when I'm sitting inside the virtual machine, the CPU usage is normal 3-10% with a bit high spikes every now and than. If anyone else has noticed something weird like that? I restarted the VM and the host and its always show this. VMware Tools are updated etc. His host W2K with 2vCPU and 3 GB of ram.
Thank you!
Each unique Windows 2000 multi proc machine I P2V would had this problem. No exception. The strange thing is that Windows 2000 VM built from scratch are very good. Change the HAL to single proc will correct the problem, but if you really need and processors multiple (as we do) then the only option I found is to play with the advanced VM option 'monitor.idleLoopSpinUS '. A value of 2000 is a good compromise for us.
-
top or sar? the two different shows idle cpu %
Hi all
I know that is not related to the oracle, but his associates to the performance issue on the server. I use top and sar cmd find the top user session... but I actually found this... the top of the cmd page it shows me that my cpu is slowed to about 97 percent... but using the cmd. SAR... SAR-allows you to check for tips of cpu... it shows my cpu is about 20% only slowed down... and I fell really cmd around the same time... of 2 different PuTTY session... now make confused me... that one is right on?
Here's the idel cmd (97% cpu) top
and here's the sar command that ran at the same time and it should cpu is about 20% only slowed down...Cpu states: CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS 0 0.05 2.2% 0.0% 2.0% 95.8% 0.0% 0.0% 0.0% 0.0% 1 0.05 0.4% 0.0% 0.0% 99.6% 0.0% 0.0% 0.0% 0.0% 2 0.06 3.0% 0.0% 3.6% 93.4% 0.0% 0.0% 0.0% 0.0% 3 0.05 2.4% 0.0% 1.0% 96.6% 0.0% 0.0% 0.0% 0.0% 4 0.05 2.2% 0.0% 0.8% 97.0% 0.0% 0.0% 0.0% 0.0% 5 0.06 1.0% 0.0% 0.8% 98.2% 0.0% 0.0% 0.0% 0.0% 6 0.05 0.4% 0.0% 2.4% 97.2% 0.0% 0.0% 0.0% 0.0% 7 0.06 1.4% 0.0% 0.4% 98.2% 0.0% 0.0% 0.0% 0.0% --- ---- ----- ----- ----- ----- ----- ----- ----- ----- avg 0.05 1.6% 0.0% 1.4% 97.0% 0.0% 0.0% 0.0% 0.0%
$ sar -u 5 5 HP-UX XXXXXXXXX B.11.23 U ia64 07/20/09 08:19:32 %usr %sys %wio %idle 08:19:37 2 1 77 19 08:19:43 2 2 79 17 08:19:48 2 4 70 24 08:19:53 2 2 73 24 08:19:58 4 2 78 16 Average 2 2 75 20
On Linux with 8 cores, I realized 'sar' recount with precision. (I can't exactly specify the version of the kernel). I think that 'sar' manages only 4 cores and ignores the rest.
Maybe you are looking for
-
storage of iPad is not available, even if I bought extra 5 GB
I want to use store bought, but I can't seem t access?
-
HP 1000-1b02au: I can't control brightness in windows 10
I installed win 10 in my laptop, the installation was fine and os worked well but brightness in my laptop was full and I can't fix. I've updated all my drivers, but there is still no solution Data sheet: Processor: amd vision of e1 RAM: 6 GB
-
How to stop monitor subfolders in Media Player
Is there a way to prevent the monitoring of the subfolders in the 'My music' folder in Vista Media Player11?
-
Vista Home and missing DVD drive
I get this problem too-it is spent as I don't know how many times whenever I stop and start at my office. Mr Fixit works only once. Real frustrated too that I think I have an external DVD burner instead. I find that this usually happens after a few
-
C210 M2 hangs at "hardware platform, configuration and test".
Hello We did a MMIC and update the BIOS on one of our servers to the latest version. System tells us that everything went well and the logging in the BIOS also worked well. The confusing thing is, even if the BIOS itself showed the correct version, t