SSO installed with reverse lookup failure

Similar Questions

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• KB963671 update continually fails to install with error 80070652

  I have a HP Pavilion dv6000 laptop under Microsoft Vista Home Premium (32 bit).  My Windows Update is configured to be installed automatically, but there is an article that fails to install every day.  The update by using the Microsoft Script Editor (KB963671) fails to install with error 80070652 code.  I read this error code indicates failure prerequisite installation/update, but I don't remember that ever happening.  When I run Office Diagnostics, everything comes out very well.  I searched the Microsoft discussion groups and communities, but have not been able to discover a solution.  Any help or insight would be greatly appreciated.  Thanking you in advance for your help.

  -Vince

  Hi U07348,

  Have you tried to install the update as a stand alone.
  Here is the link to download the update by itself.
  http://support.Microsoft.com/kb/963671
  If it does not install to proceed with the following steps.
  Step 1
  Download and install Windows Installer 4.5
  http://support.Microsoft.com/kb/942288
  Step 2
  Download and Install CleanUp Utility
  http://support.Microsoft.com/kb/290301
  Let us know if you need help with this problem.
  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• repeated #105, "DNS lookup failure" error, pavilion2000-299wm

  Flag 2000-299wm, model # qe282uar #aba, WIN 7 home, google chrome.     I get the DNS lookup failure error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve DNS of the server addressmessages) and reloading is usually not good.      I décliqués the box "Use a proxy server for your LAN" "but do not know what else to do.

  also, I notice that my connection often shows "dormant" when I actively use the computer/connection...i don' don'tknow if this could be related or not.

  Unfortunately I am not very computer... the knowledge I have are self-taught and I only know how to use a computer not diagnose or even no terms that are second nature to someone who knows what they're talking about... so please use language I can understand and be patient with me?

  Looks like you are having network connectivity problems or if you connect to a network with problems.

  First of all, make sure that your computer is connected to a network with internet access with success, by checking the cable network (ethernet) - is - it connected correctly? If you do not use a network cable, make sure that your wireless connection is connected to the appropriate network.

  If you're still having problems after checking the physical connection, try to run Windows Network Diagnostics. Make a right click on the network of small size or icon wireless near the clock (bottom right of the screen by default), and then click "solve problems". This wizard will search for and attempt to correct any network, connectivity issues.

• RKM Hyperion Planning 11.1.2.3 of ODI installed with FDMEE

  Hello!

  We have a problem when you try to run the reverse engineering for hyperion planning.

  We get the following message:

  org.apache.bsf.BSFException: exception of Jython:

  Traceback (most recent call changed):

  File "< string >", line 41, < module >

  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347

  at com.hyperion.odi.planning.wrapper.PlanningWrapper.login (unknown Source)

  at com.hyperion.odi.planning.ODIPlanningConnection.connect (unknown Source)

  at com.hyperion.odi.common.ODIModelImporter.importModels (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: error/demarshaling return; nested exception is:

  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347

  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)

  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)

  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)

  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)

  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)

  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:745)

  Caused by: Traceback (most recent call changed):

  File "< string >", line 41, < module >

  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347

  at com.hyperion.odi.planning.wrapper.PlanningWrapper.login (unknown Source)

  at com.hyperion.odi.planning.ODIPlanningConnection.connect (unknown Source)

  at com.hyperion.odi.common.ODIModelImporter.importModels (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: error/demarshaling return; nested exception is:

  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347

  at org.python.core.Py.JavaError(Py.java:455)

  at org.python.core.Py.JavaError(Py.java:448)

  at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)

  at org.python.core.PyObject.__call__(PyObject.java:355)

  at org.python.core.PyMethod.__call__(PyMethod.java:215)

  at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)

  at org.python.core.PyMethod.__call__(PyMethod.java:206)

  at org.python.core.PyObject.__call__(PyObject.java:381)

  at org.python.core.PyObject.__call__(PyObject.java:385)

  to org.python.pycode._pyx0.f$ 0 (< string >: 41)

  to org.python.pycode._pyx0.call_function (< string >)

  at org.python.core.PyTableCode.call(PyTableCode.java:165)

  at org.python.core.PyCode.call(PyCode.java:18)

  at org.python.core.Py.runCode(Py.java:1204)

  at org.python.core.Py.exec(Py.java:1248)

  at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)

  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)

  ... 19 more

  Caused by: com.hyperion.odi.planning.ODIPlanningException: error/demarshaling return; nested exception is:

  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347

  at com.hyperion.odi.planning.wrapper.PlanningWrapper.login (unknown Source)

  at com.hyperion.odi.planning.ODIPlanningConnection.connect (unknown Source)

  at com.hyperion.odi.common.ODIModelImporter.importModels (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)

  ... more than 33

  Caused by: java.rmi.UnmarshalException: error/demarshaling return; nested exception is:

  java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347

  at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:247)

  at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:162)

  at com.hyperion.planning.HyperionPlanningBean_Stub.Login (unknown Source)

  ... more than 41

  Caused by: java.io.InvalidClassException: com.hyperion.planning.HspException; incompatible local class: stream classdesc serialVersionUID =-2065834634290912749, local class serialVersionUID = 1173493819024915347

  at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:621)

  at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1623)

  at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1518)

  at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1623)

  at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1518)

  at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1623)

  at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1518)

  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1774)

  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1351)

  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:371)

  at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:245)

  We use:

  Hyperion Planning 11.1.2.3

  ODI (installed with FDMEE)

  We trace the error in the knowledge base, but apparently is a common error present in other products, but we are a little confused

  If you can help us with any suggestions would be helpful!

  Thank you

  Ivan Lemus

  Take a look at the following support doc - ' java.io.InvalidClassException: com.hyperion.planning.HspException' reported when attempting to return a genius Hyperion Planning data warehouses (ID of Doc 1378423.1).

  I've seen usually the error when the username/password of planning name is either incorrect in ODI or has no administrative privileges

  See you soon

  John

• Problem installing with Dreamweaver. (Error 1935, the code of exit 7)

  Hey there,

  So I've been Googling my little heart there for 8 hours now and I have not found any results.

  I installed on a x 64 Win 7 system. My Google search, I discovered that the relevant part of the installation log is:

  Function: Microsoft_VC80_ATL_x86_

  Action 19:23:42: PublishProduct. Dissemination of product information

  [808] Tue May 15 19:23:43 INFO 2012

  Error 1935.An error occurred during the installation of Assembly component {97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

  Action ended at 19:23:43: InstallFinalize. Return value 3.

  Here are the logs of error-installed

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 19 (s), 19 WARNING (s)

  ATTENTION: OS configuration is not for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}

  ATTENTION: OS configuration is not for {A1BC7068-C1BA-410F-8B9A-DB807C803DE2}

  ATTENTION: OS configuration is not for {C79312BD-3E76-4474-A10C-1435D1856A4B}

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ATTENTION: Payload cannot be installed due to the failure of the operation dependent

  ERROR: MsiConfigureProductEx failed with the error: 1603

  ERROR: The following payload errors were found during the installation:

  ERROR:-Adobe Media Player: installation failed

  ERROR:-SiteCatalyst NetAverages: installation failed

  ERROR:-Microsoft_VC80_ATL_x86: installation failed

  ERROR:-DeviceCentral_DeviceCentral3LP-en_US: installation failed

  ERROR:-AdobeHelp: installation failed

  ERROR:-Adobe ReviewPanel CS5: installation failed

  ERROR:-CSXS Extension history: installation failed

  ERROR:-Adobe CS5 language: installation failed

  ERROR:-DeviceCentral: due to a lack of Language Pack installation

  ERROR:-Adobe CS5 Extensions CSXS: installation failed

  ERROR:-Creative Suite 5 Design Premium: installation failed

  ERROR:-HIL help search: installation failed

  ERROR:-Adobe Dreamweaver CS5: due to a lack of Language Pack installation

  ERROR:-Adobe Dreamweaver CS5_AdobeDreamweaver11en_USLanguagePack: installation failed

  ERROR:-CS5 Adobe Extension Manager: installation failed

  ERROR:-Adobe ExtendScript Toolkit CS5: installation failed

  ERROR:-Adobe AIR: installation failed

  -------------------------------------------------------------------------------------

  I already tried in safe mode, install fix my .NET Framework and sfc / scannow.

  Anyone have any ideas?

  Edit: added in install log

  It seems that your installation is a failure due to the failure of runtime 'Microsoft_VC80_ATL_x86 '.  We already have an article for the same question could you please follow the steps mentioned in the KB

  http://helpx.Adobe.com/Creative-Suite/KB/Visual-Studio-runtimes-install-fail.html

• I have windows 7 installed with boot camp.

  I have Windows 7 installed with boot camp and use it for some financial software and games. Is this compatible with El Capitan Win7 installation, if I update?  Thank you

  Yes. Please check that you have backups and disk not resized/re-partitioned, before the upgrade of the El Capitan. In addition, create a Windows system restore point before the upgrade.

• Since its installation in Firefox 20.0.1. There is a box in the center of my screen titled progress install with a bar running below the Green progression.

  Please help this driving me Mad
  Since the installation of Firefox 20.0.1. on my MS Windows 7 Toshiba Laptop there was a box in the center of my screen titled "progress install < with a bar running below green growth."
  Firefox 20.0.1 (FF) works very well and I can drag the box of progress on my screen to my heart's content. Although there no small cross at the top right I can get rid of him by my mouse over the icon (ff), pinned to taskbar program in hover. This gives me a box of progress of installation with small cross, click and his party. That is until I got close and restart (ff) and back it comes in the middle of the screen. I tried to get rid of it through CTRL-ALT-DEL Task Manager, but even once, it reappears on start up (FF) I also stripped (ff) of my machine, once using widows uninstall/change of MS program features and for the second time by using third-party software as soon as I reinstall (ff) new same old problem.
  Thank you
  Cordially Fenfolly

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How can I remove new toolbar (with Bing, MSN, celebrities, etc.) installed with 3.6.3

  remove the new toolbar (with Bing, MSN celebrities, etc.) installed with 3.6.3

  This has happened

  Each time Firefox opened

  is downloaded 3.6.3

  Firefox does not come with the Bing toolbar. Another program that you have installed delivered the Bing toolbar and added to Firefox.

  If you can find the Bing toolbar in Add/Remove Programs, uninstall it from there.

  Otherwise search for the toolbar in tools-> Modules-> Extensions in the Firefox menu bar and uninstall or disable.

  It can be named Research Assistant or Search Toolbar 1.04.

  See this thread for other possibilities: https://support.mozilla.com/en-US/forum/1/531033

  If you are using help-> information on troubleshooting and the button copy to the Clipboard to paste here troubleshooting information, I can help you identify the culprit.

• El Capitan installed with problems

  Hi people,

  I just installed El Capitan of Snow Leopard 10.6.8. Everything seemed okay... until I opened the first application, which is a PDF file. I tried to close the new Acrobat 8 pro installed with El Capitan, but it does not close and the screenshot stays on the screen. I tried to reinstall El Capitan again on the app store and when its done, it won't restart my computer, like Acrobat does not close. It will not force me to leave or the other. I pulled the plug on the wall and turned back on to find that the Acrobat is still healing. Any suggestions?

  PS: my mouse now scrolls the contrary somewhere else :/ I have to scroll to the top to make the page down?

  IM on a 24 "early 2009 Imac, 2.93 GHz Intel Core 2 Duo processor, 4 GB memory

  

  

  Thank you very much

  El Capitan does not install Acrobat of any kind. Do you mean that you installed when you installed El Capitan or did you update the version that you had already installed before installing El Capitan?

  Your screenshots are not displayed to me what happens regularly here.

  The scrolling direction has been changed while you push the content around the page, does not move the little thumb in the scroll bar. It shouldn't take more than a few hours to get used to. If this isn't the case, you can enable in the preferences of the mouse or Trackpad.

• I have an installed with real-time PXI-8109 module. Displays the indicator USER1?

  Hi all

  I have an installed with real-time PXI-8109 module.

  USER1 indicator LED displays on the Panel?

  Thank you

  The LEDs of the user are the indicators that you can control programmatically if needed be.

  -Jayk

• Applications installed with device drivers OR

  I bought a few applications that have been written entirely in LabVIEW that also use data acquisition OR PXI cards.  Before the installation, I installed the drivers of devices OR newer.  I discovered that more than 70 applications installed with the drivers.  Where can I learn what do each of these applications?  I need this information because, in order for me to install device drivers OR on my networked computers, I need to know what my local network vulnerabilities could be introduced with these applications.  If anyone can help?  I enclose a list of executables (*.exe) installed in the C:\Program NIUninstaller Instruments\ folder only.

  Hi USAARL.

  I follow with you on a private message. As mentioned, we have what you ask because well documented right now, it's something we will address actively. We are having this type of information will be documented and available to all users soon. Please, followed in the manner specified in the private message.

• Multisim update fails to install with error.

  The regular update fails to install with error: an error occurred in the installation of an update.  If this error persists contact technical support OR.  It comes to Multisim.

  How can this be repaired?

  Thank you

  Multisim is different to the discussion forum... Please post there is http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370

  It will help you get a better answer...

  Best regards

  H S

• Warning could not cancel install with error 80070057

  Installed upgrading windows on my Windows server 2008 and after that 1 day download and installation to date is an error message indicating that

  Warning could not cancel install with error 80070057

  warning do not cancel the installation in class HR = 80070057

  Original title: it Manager

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• HP hp Server ml310e gen8 v2 install with Server 2008 4 t hard drive can be used completely

  Know one on hp hp Server ml310e gen8 v2 install with Server 2008 and why 4 t hard drive cannot be used entirely to the server? How can I change the settings of the Bios MBR TPG mode?

  This would be better served if posted in the Forum of Support Business company instead of the global consumer support forum.

  http://h30499.www3.HP.com/