SSO - move the user to a different OU breaks SSO

Similar Questions

• Move the Users folder to another drive or partition under Vista 64

  I want to move my full users folder to another drive or partition under Vista 64-bit.

  I found these instructions to do with Windows 7 and confirm that they work very well on a Windows 7 computer I set up yesterday.
  http://Lifehacker.com/5467758/move-the-users-directory-in-Windows-7
  ROBOCOPY, RMDIR, MKLINK programs all exist in Vista and have all the command line switches such as specified in section of Windows 7.
  I want to use junction points as described in the article, rather than messing around with search-and-replace in registry. The use of junction points is cleaner and easier to reverse if I ever need to move the Users back folder to its original location.
  These same instructions for Windows 7 works with Vista 64 bit to move my users folder to a different hard disk or partition?

  Well, I couldn't wait any longer for a response.

  So I gave him a test and Windows 7 instructions work perfectly with Vista 64 - bit word. Hope it will be useful to someone else.

• Move the tables to a different tablespace

  Hello
  I created 6 tables with my account in the USERS tablespace. If users wish to access (and he has privileges), it can be accessed as - username.nameoftb.
  Now, I would like to create new tablespace, move there all the USERS tablespace tables and if someone (who has permissions) to have access, it can, but only with the table name. Without using the username who created them.
  
  Could you please help me, how to proceed?
  -move the tables to a different tablespace
  -users can access without using the name of the creator
  
  Thank you!

  1. change the SMSC table. ERSUSERWISESUMMARY move tablespace ERST_01 nologging;

  Can also rebuild the indexes as well.

  ALTER Index SMSC. INDX_ERSDATA_STRTTIME reconstruction tablespace ERSX_01 nologging;

  2 create a synonym for this object

  create public synonym mrbt_activation for owner_name.object_name;

  Concerning
  Asif Kabir

• full of drive c, drive d not. I can just move the users to the d drive

  Hello

  I have drive C (VISTA OS) 55 GB free of 3%. (System start-up, swapfile, active crash dump, primary partition)

  A drive D (DATA) 48.8 GB with 84% free also (logical drive)

  There is also an anonymous reader of 7.81 Gb with 100% free (primary partition)

  Now the problem... is possible for me to move the users (17 GB) of the C folder on D to release memory on C, or is there a better solution.

  Thank you very much

  John

  Hello

  I have drive C (VISTA OS) 55 GB free of 3%. (System start-up, swapfile, active crash dump, primary partition)

  A drive D (DATA) 48.8 GB with 84% free also (logical drive)

  There is also an anonymous reader of 7.81 Gb with 100% free (primary partition)

  Now the problem... is possible for me to move the users (17 GB) of the C folder on D to release memory on C, or is there a better solution.

  Thank you very much

  John

  Hey Jean vc

  back up your data on d: delete d: and c: and then extend it in the unallocated space where d: is

  read the below tutorial on how to do

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  Walter, the time zone traveller

• Any way to move the home directory of the user to a different partition?

  I have a dual boot Linux/Windows 7.  I managed to create a virtual Windows 7 machine running Linux that allows access to the physical partition of Windows 7 as the C: drive, but starts from its own virtual D: drive.  Also, I moved the users folder in the virtual machine on the C: drive.  In this way, regardless of if I started in the virtual machine, or natively in Windows 7, I can connect and my user files will be exactly the same.  (I still have to install applications twice, but it's OK for my purposes).

  My question is, I want to have a local administrator account in the virtual machine that has its directory on the virtual disk, in this case I have, somehow royally mess up my C: partition physical, so I can at least log in with administrator privileges and copy all critical files, for example.  Is this possible?  If so, how?  (I used to have a game similar to this one, except my local user does not have administrator privileges, but I do not remember how I set up to the top.)  Unfortunately, critical files on my partition C: physical got somehow deleted, and there was very little I could do because my administrator account was on this score, that's why I'm going to put all of this again.)

  Hi Samuel,.

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Virtual PC and XP Mode

• Why doesn't the mouse click on the tab context menu more displays the option to move the tab to a different group.

  When I click right click on a tab, the context menu no longer offer to move this tab to another group.

  What's new since 38.05

  Why was this feature depricated?

  I've got 38.0.5 on Win 7 x 64 Fx.

  You already have a userChrome.css file to change the user interface of Firefox? It is the only other method that comes to mind to hide a menu item. You can find such a file in this way:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Look for a folder named chrome , and if you find it, click on inside.

  Any userChrome.css file here? If so, you can open in a text editor and view its contents to see if it looks familiar.

  Or maybe your program files have been damaged in the upgrade. This happens from time to time, with unpredictable results. To remedy this situation, I would suggest:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (no incompatible or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  You can get reinstalled Firefox?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• How to present the user programmatically with different input parameters based on the choice of the Group of entry?

  I have an array of items that represent the inputs to an operation.  The user is allowed to choose a random order for entries to assemble in the table.  Each element, however, requires different input associated parameters that are used by the operation to define each choice.  I realize that, for an array of clusters, the individual cluster array element must all have the same format, that is, they must all have the same type and number of the cluster inputs or outputs.

  Ideally, I would like to have a picture of the clusters, where each cluster has a different set of inputs.  Does anyone have ideas for a solution of programming would be to approach or to simulate such a structure?

  Thank you

  Mike H.

  Hello

  I tried soemthing and attached the VI (LV 2010)

  develop something similar to what is in the attached VI and then package clusters for which the user enters the parameters... I prefer the tabs page, more than the cluster "all settings".

• Move the user off the system disk folders? Envy of all the data on E, so need to move directories user E. not individually, but in the world. If all new users, I create will have their user and docs folder on E.

  Got a new laptop with win 7 home premium pre-installed. Using the language of win 7... I have decreased the volume of HDD to 55 GB.  Made new simple volumes. I want all the data personal on E, so need to move user directories to E. No individually change the location tab on dozens of files, but in the world. If all new users, I create will have their user and docs folder on E from the gitgo.

  Under XP, I could just change the 'My Documents' link on each desktop, go to the e. * instead of c *. *, but with win7?

  As a Windows Home Server and most wise OS facilities, the system drive is isolated and a drive of 2 or 3 for everything else.  Get a problem? Just restore the system drive.

  You need the answer?

  Thank you
  Tom
  PS Microsoft: This backup/do imaging software, why don't we name the image so many can all be stored on easily in one place without having to go and rename it or move them elsewhere?

  Hello TomZork,

  Thanks for posting on the Microsoft answers Forum.

  In another forum, I found the instructions to move folders of users to another drive.
  You can follow the post here. This is attributed to Jimmie R. Houts.

  Article:
  You can move the entire folder C:\Users to another drive quite easily once windows is installed:

  1. Boot from the installation media and access the command prompt (I think you need to click on fix everything first)
  2. Use Robocopy to copy C:\Users to D:\Users: robocopy c:\Users d:\Users /mir /xj
     a. /mir says robocopy to mirror directories, this will copy all files and permissions
     b. /xj is very important, it means robocopy does not follow the points of junction. If you forget this, you will have a lot of trouble.
  3. Make sure that the files copied successfully
  4. Delete c:\Users
  5. Create the junction pointing d:\Users: mklink /d c:\Users d:\Users

  That's all. I used this process for Vista RTM with no problems.

  Here's an article that explains as well. Just use robocopy instead of xcopy as it does in the article in order to avoid possible ntfs permissions problems.

  Update: because I discovered the hard way, I thought I would mention also that if you plan on switching "Program Data", or "Program Files" with this method, you will be disappointed to know that everything works as expected, but the windows updates will install is no longer. I don't know if this problem has been fixed in Win 7.

  With the foregoing, it is not a Microsoft forum or Web site so you will have to use at your own risk. I also recommend to do a system restore point before making any changes in directories that you can then go back to a previous state.

  Please reply back and let us know if these suggestions help you to solve your problem, then to benefit others.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• move the cloud files account different cloud

  Hello

  Inadvertently, I have two different accounts of CC. One account was created when I started using the mobile app 'Ideas' several years ago. I have a hundred drawings stored on the cloud under this code. I also created a profile when I bought a membership CC with Creative Suite (paid in advance for a year - in February). What I would like is to have the folder 1 CC (the one with the designs) available when I am logged in as the user 2. My first impressions are a) cancel the membership on the 2nd account and sign up for the account of the 1st account. It would probably cost me money, but it will extend my subscription of 2 months. (b) find a way to save files CC (in their original format, not only in JPEG format) on my hard drive, so I can sync it with the 2nd account.

  I would appreciate any feedback or advice I can get. BTW, I already tried to go through customer on this subject and they were unable to help.

  Thank you

  Christa

  Since the page creations site active CC to https://assets.adobe.com/assets/mobile Mobile, you can use the Send link to make a public link to the old account with the files of ideas and then use Copy creative cloud to save in the new account.

  

  

• column of a link with the ability to send the user on several different pages

  using apex 4.0
  
  In my example:
  User: Secretary for a large company in charge of the HR database, enter new employees, reorganizing the employees, managers, etc.).
  Employee: A person working for the company whose information is in the database.
  
  The problem: my client wants the data divided into several subcategories, so, for example, it would be like sales, managers, etc., using the human resources database. The main page of this project contains a table that lists all the company employees, low to high. There is a column of navigation with several links to predefined reports filter that filters data on the question whether the employee in the database is a seller, Manager, etc.. If the user clicks on the link change, it will take them to a page master detail where the upper part is general information and background tasks of the employee. The problem is that, according to his level, there may be additional details that the user will want to change, such as if the employee is responsible for, the user will also want to see another table a list of employees by the Manager. There is also a second level of managers who will have a table of managers of this person manages. The dream is that there is a list of links above the tabular presentation, which will allow the user to choose what table they want to see. I thought about the following:
  
  1. create several copies of the home page, one for each subcategory, so that she will be the link change correct.
  Positives - Simple, easy, I know how to.
  Negative - would like it to appear on the same page, such that if the user deletes / adds a column in a single page, this change would occur on all other pages. I also have to make the same changes on several pages, one is required.
  
  2. create a text field hidden on the page that records the last link, what they clicked. When the user clicks on the link change, some kind of javascript selects the right page to go to in view of what is in the box.
  Positives - seems simple enough, but I have not tapped into javascript a lot
  Negative - not for sure if it is even feasible, would need help
  
  3. create a subpage of master-detail, that holds all the necessary tables and hide those that are not. When the user clicks on a link, the link triggers the current table to hide and another to appear.
  good points - all in the same place, that one page to link to main page
  negatives - it would require at least 5 tables on one page and I do not know how the apex would like that. I also don't like the idea of the page calling itself when the user is looking at senior managers and to display a lower Manager / employee.
  
  4. a creative method / useful / incredibly simple bore by a user of this forum.
  
  Because I'm in a very short, customer review period next week, I implémenterai #1 because it is the easiest and most straight forward, but I would like to know your thoughts to make much cleaner.
  
  Published by: rabbitman June 4, 2012 08:07

  I don't know if it's the best way to accomplish what you want, but it worked for me.

  Change the link in the column to specify the following for a target URL, where EMP_NO and EMP_TYPE are columns of the report.

  JavaScript:apex. Submit('#EMP_NO##EMP_TYPE#')

  In the processing of the page after several branches to different pages depending on the type of employee. For example,.

  Branch to Page 2: Condition = instr (: REQUEST, 'SALES') > 0
  Branch to Page 3: Condition = instr (: REQUEST, "MANAGER") > 0
  Branch to Page 5: Condition = instr (: REQUEST, 'PRÉSIDENT') > 0

  Since the: APPLICATION also has the EMP_NO, you can use this to set the value of the EMP_NO for the target page, pull up to the employee's file.

  Natasha

• How directly the user to a different scene from inside a clip?

  Hey,.

  I have a button inside a mc and I need to direct users to a different (outside mc) scene when you click.

  How can I do?

  Thanks in advance!

  AS3: MovieClip (root) .gotoAndPlay (name of frame or label, stage name);

  AS2: _root.gotoAndPlay (image tag);  don't use not scenes for navigation.  which frame label and use the image tag.

• Move the user ORGANIZATIONAL unit is failing in AD

  Hello
  
  I use moveuser method in AD OOTB to move user in AD.
  I'm getting ' AD. USER_OR_ORG_DOES_NOT_EXIST'.
  How the user is never in AD OR old and the new ORGANIZATIONAL unit is also there.
  Previously, I am turning off the user. How will I know whether or not the user is disabled on AD. The status of the task shows "user disabled successfully".
  
  Thank you and best regards,
  SK

  Which user are you trying?

  It seems that Admin ID which is present in ADITResource doesn't have sufficient permissions to perform the operation.

  Give the permission to that user, then try.

• Windows 7 cannot move the user to the login screen.

  I use a windows virtual machine 7 for an assignment and it requires me to connect to a host server with a domain name and Setup. On the connection with the windows machine screen 7, there is no option to switch to the user. When I connect to it as an administrator and try to use the switch user here, nothing happens when I click it. I really need to fix this quickly because I am unable to continue the assignment without logging as long as domain user, I put in place. Thanks if you can help

  http://PUU.sh/3fn2H.jpg

  Hi,

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

• Move the user profile on Windows XP/Vista/7 for Windows Server 2008 R2

  We set up a Terminal Server Windows Server 2008 R2 server in a network. The plan is to move all profiles of Windows XP/Vista/7 user machines to this new server.

  Is it possible to automate the passage?
  Thank you

  This question goes a bit beyond the scope of this forum.  Here, we help Windows users having problems with files in their family environment of Windows.  Server gurus hang out in the TechNet forums, and if anyone knows a solution to your problem, they will be.

  http://social.technet.Microsoft.com/forums/en-us/categories

• ESXi 4 - move the virtual machine to different hardware

  Hello everyone, I'm new to VMWare. I was wondering if I say ESXi 4 running on a Dell poweredge 2800 dual processor with 2 VM I could take these virtual machines and move them (the moving process no matter as long as it is possible) a dual processor Dell Poweredge 2950 with different RAID card, RAM, CPU, etc, and ESXi 4 is also installed, etc. it would work?

  Thank you!

  Like you, I'm pretty new to VMWare. That being said, I have 2 servers ESXi right now, and I moved the computer virtual from one to the other without problem. I vSphere Essentials, and it was very easy to ' cold migrate "a virtual machine from one server to the other. The host of the virtual machine (white non-liste) origin is simply a HP dc7900 PC with a quad-core processor and 8 GB of RAM. The new host of the virtual machine is a Dell 2850 (non-whtelisted) with 2 processors duo-core and 8 GB RAM. The virtual machine has been the guest of 32-bit OS (Windows XP), while she had no problem. I can't move my Windows Server 2008 VM for your Dell printer, because it does not support 64-bit for the guest operating system (the processors are not compatible VT).

  The only thing that will happen is that Windows (XP, in this caes) will have to go through the process of Validation WIndows again, because there are some major hardware changes, as seen by the operating system. Not a big deal, just soemthing to consider. I also had to re - check my Adobe products on this virtual computer, as I did not have the unvalidate on the virtual machine before moving on to the virtual machine. Adobe also thought that it was a whole new PC, so I had to call & make them validate the installation manually.