Standby logic out of sync after that archiver slaughtered (how to Resync)

Similar Questions

• Audio goes out of sync after export (PP CS3)

  Hey there!

  So I had a few problems with first Pro CS3. My main problem is with the audio goes gradually out of sync after export. I am trying to export in 1440 p (2560 x 1440). I export in h.264 with 60 images/s.

  1. Original file type: AVI
  2. Original Frame height and width: 1680 968
  3. Original Audio bitrate: 1411 kbps
  4. Original Audio sampling rate: 44 kHz
  5. Original frame rate: 60 fps
     Data rate: 1191254 kbps
  6. Total bitrate: 1192665 kbps

  Before installation:

  

  Can someone help me and tell me what are the audio settings I should export in correlate with 1440 p and 60 frames per second? Any help is much appreciated, and I look forward to your responses.

  Much appreciation,

  -David

  What codec is used in this avi (as it isn't a regular avi of a camera) and if the framerate is variable, you need to convert to constant framerate before importing it in first.

  Converter for example Handbrake.

  Bit rate may be too high. Don't forget that CS3 is pretty old.

• Audio out of sync after importation. MOV

  Audio issues out-of-sync after you import a clip .mov in Premiere Pro.

  The .mov video the problem doesn't have a problem when played with quicktime or vlc: audio fits perfectly with the video.

  Adobe Premiere Pro 7.2.1 CC (4) on OSX 10.9.1

  Open the first new project... > OK > import the single video clip (either by dragging in the app, or by using the media browser). Start to play the clip in the Source monitor, rub with impatience. Result: audio and video are way out of sync.

  Clip .mov, the origin of the problem has been exported to the Silverback app.  http://silverbackapp.com/

  Details on the clip .mov, via Media Inspector app:

  ============================================================

  General

  Full name: /Users/jukeboxhero/20140203.mov

  Format: MPEG-4

  Profile format: QuickTime

  Codec ID: qt

  File size: 638 MiB

  Duration: 34 min 46 s

  Overall bitrate: 2 566 Kbps

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-06-02 15:55:40

  Library: Apple QuickTime

  Video

  ID                               : 2

  Format: AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: No.

  Parameters of the format, Reframes: 2 images

  Parameters of the format, GOP: M = 2, N = 30

  Codec ID: avc1

  Identifier of the codec/Info: Advanced Video Coding

  Duration: 34 min 46 s

  Bit rate mode: Variable

  Bitrate: 2 449 Kbps

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate mode: Variable

  Rate: 18,969 fps

  Minimum frame rate: 6,522 fps

  Maximum frame rate: 19,355 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  /(pixel*Frame) bits: 0.062

  Stream size: 609 m (95%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:46

  Marking date: UTC 2014-02-04 15:27:35

  Primaries: BT.709 - 5, BT.1361, IEC 61966-2-4, SMPTE RP177

  Transfer characteristics: BT.709 - 5, BT.1361

  The matrix coefficients: BT.709 - 5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

  Audio

  ID                               : 1

  Format: AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID: 40

  Duration: 34 min 45s

  Bit rate mode: Constant

  Bit rate: 104 Kbps

  Nominal flow rate: 128 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling frequency: 44.1 KHz

  Compression mode: lossy

  Stream size: 25.9 m (4%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-02-04 15:27:35

  ============================================================

  The video matter perfectly in Final Cut Pro 10.1.1

  I have Premiere Pro of the trial and the Final Cut Pro trial. If there is no fix or get around easily, I have to give up the first.

  > Frame rate mode: Variable

  No version of first does 'good' with Variable rate

  Below is on iphone, but can help

  Some people find that the Iphone will not edit easily because it uses a variable rate

  -A possible solution in the message #22 http://forums.adobe.com/thread/934466

• Video and Audio out of sync after rendering with SOUL

  I went videos of gameplay, with a fable for my microphone and one for the PC-ingamesound. After I visited with Premiere Pro 2015.4 all right.

  But with Media Encoder 2015.4 gameplay video is about 15 frames before the sound. I have an intro to 4 seconds, it is in sync, so I don't understand why the matter of gameplay GET is out of sync.

  When you need more information to help me, let me know.

  Hi Gunther, sorry you have problems with the SOUL.  Looks like the sync is correct when exporting directly from the first, is that correct?  Also, what format you export to SOUL & first?  The problem of synchronization occur even if you export to a different format of the SOUL?  You can try to revive the SOUL with the SHIFT key to reset your preferences, just to verify that the problem is not related to corrupt settings.

  If you agree with the sending of your first sequence and media I could study the problem more away from my hand, let me know and I'll send you a link.

• Adobe first Pro CC 2015 Audio and video out-of-sync after the upgrade of the 2014 cc

  Hello everyone

  Once the upgrade to first Pro CC 2015 I get all of my video projects that are locked with a yellow box (Adobe Player) that says "Audio and video out-of-sync clock to xx:xx:xx.xxx ', and all my footage has the same problem

  No reason? HE WORKED IN CC 2014 PEARLS!

  any help is very appreciated.

  OK, since I'm short on time and my boss's eye laser pierces my skull, I had to ROLL BACK TO CC 2014.2 G * T!

  Fortunately, there is a way MORE HERE: how access, restore or update any Version of Adobe CC apps | ProDesignTools

  don't forget to install the updates after: all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools

  Lesson of the day: If you have a big project on creation, and you are tempted to update CC 2015 for THE MOTHER OF GOD NOT WHERE, AND GET THAT HAND OF THE MOUSE NOW! It will mess up your project and throw the errors that you never had in CC 2014.2

  Good luck!

• Video timecode out of sync after upgrading from CS3 PP PP CC

  Hello!  I hope someone can throw me a Hail Mary here, because I'm wrapping a DVD project in the coming days in order to make a deadline for duplication of disk by Tuesday to have done before I'm driving up to Texas Thursday with hopefully 200 copies of a DVD I have already printed on the disks without content to burn bright disc labels.

  I consider myself as an amateur, but successfully put in place a project to Adobe Premiere Pro CS3 lasting 73 minutes in 2007 with three camera angles and audio of the soundboard.  At the time, I work on the menus of DVD in Encore CS3, but never finished due to many problems over the years.  So now I need for this project, because the band that I shot is back together once more, and they want to do something with it.  Their first show is June 29.

  After update of titles to reflect more MySpace pages and outdated information, when I tried to export to Encore CS3, he kept exporting to approximately 8 to 9 hours and then first Pro would just shut down without explanation.  I lost a few days trying to get this to work, but alas, it wasn't meant to be.

  So given that I just built a new computer with all the cool stuff on it and Windows 7 64-bit, Intel i7 quad core processor, I decided to take the plunge in the creative Adobe cloud, even if I have no idea if this issue with PP, closing no explainable reason would be corrected by the upgrade.  I downloaded first Pro CC and Encore CS6 and open the project file I had on CS3.  I had originally used the Smudger LET police for all securities, which has been is over rated, so my titles were all screwed up.  Not a big deal.

  What is the problem, is that my audio and video files are all out of sync!  I thought it could be fixed by moving the video files to be in harmony with the audio, but that didn't quite do the trick.  I get horizontal lines at the beginning of the clips that prove be a change in the videos usually start times.  Even if I cut out the pieces of the horizontal line and move the video to be synchronized with the audio, changes are all shifted and come at the wrong time.  I don't know even how to explain it properly, but I hope that someone out there understands what is happening.and can tell me how to get things back in sync.

  Here is a screenshot:

  

  How can I tell first Pro CC I want to keep the changes exactly where they are, but adjust to start timecode to 00. 00; 00; instead of 00 00; 01; 41; 15, where the horizonatal lines finally disappear?  I already have over 200 hours invested in this project that I don't want to do it again, especially since I do it does not expect to pay for my efforts.  I'm just a fan of a group and want to share it with other fans of the band.  Essentially, I am donating the DVD and the CD of the show to the band to help raise money to cover the costs of production of a new album.  In addition, the red lines are Pro v3.4 video Neat plugin not yet rendering/preview.

  Thank you in advance!

  Matt

  It shouldn't be a problem.  Many people have multiple versions installed.

• Audio out of sync AFTER importation

  Hello how are you?

  I've been looking for a solution for a while, but I can't seen to find.

  The thing is... I captured some footage of gameplay, with the files that last an hour or even more.

  When I look at the files in any player (Windows Media Player, VLC, Media Player Classic), they play very well, the audio and the video seems to be on the synchronization, and click OK.

  But after I import into Adobe Premiere, it is just out of sync. Even when I look in the Source monitor before dragging to the timeline.

  It seems that there is a problem when the sponsor of audio.

  But even the length of time is different from the original, there are some frameworks or even seconds of difference inside the first.

  What is happening with different codecs AVI (from FRAPS), H.264 (with audio AAC and MP3)...

  I tried to clean the cache, remove the software and reinstall it again, conversion - all.

  Some say it is a recurring bug on Adobe Premiere. Is there a patch or something that I could do?

  It is really strange that the problems occur AFTER the import. Apart from the first is fine, so there is no problem with the catch, right?

  I would appreciate if someone can help me. Thank you very much!

  PS: I have Adobe Premiere Pro CS6.

  Intel Core i7

  12 GB OF RAM

  GeForce GTX 580

  HD 2 TO 7200 RPM

  Hey I don't know if you have found an answer to your problem to someone else, but I had the same problem before, and I've finally found a solution I would like to share.

  For my problem, it's the Visual of my webcam which became the desynchronization of audio from my webcam on top of my gameplay videos. Now, I'm not a computer genius, but I discovered that the recording devices can record in "variable framerate" or "constant framerate. If a vid becomes out of sync with itself in Adobe Premiere but not out of sync when we look outside Adobe Premiere, it's because it was recorded in "variable framerate. What variable framerate means that it cycles/changes managers at different rates throughout the video, making the video a different in Adobe Premiere as the original video outside length of Adobe Premiere.

  I downloaded a video converter called Handbrake. In Handbrake, I imported just the video I wanted to convert and edit a variable "framerate" option to "constant framerate. After that my webcam images has been transformed into "constant framerate", I imported the new webcam images in Adobe Premiere and everything was in harmony at last!

  I hope this help anyone who had the same problem.

• Audio/video Out Of Sync after export

  Hello, I hope I gave enough information below. I searched high and low for an answer to this and can not find a solution that has helped.

  I have an audio problem be out of sync a few images when exporting.

  First Pro Version CC using 2015.3 works on a Windows 7 PC with 16 GB of RAM.

  Source footage is Panasonic Lumix g-7 MPEG Movie wrapped in .mp4.

  Rate of the source footage is 59.94

  No external codecs are used.

  Here is a screen of the properties panel to one of the source images files in Windows.

  

  Here is a screen of the sequence settings

  

  Here are the screens of my export for video and Audio settings

  

  Here is a screenshot of the properties of one of the image source files window and the properties of the sequence.

  More large window - properties of the source images

  Small window - properties of the sequence

  

  However, the problem does not occur when I check the "Match sequence settings" at the top. I want to make so files won't be as big as when I pay with these settings. Just looking for YouTube, but even this preset produces the problem, I'm going to.

  

  Any help is greatly appreciated!

  The problem seems to be that I was unaware of a 2 ms latency when recording with a wireless LAV microphone system. I moved the audio advance 2ms and the delay has disappeared.

• Multi-track audio out of sync after you import elements of first

  I use - Adobe first Elements 10, Windows OS7

  I have two video files to MKV quality that I converted to VOB and MP4. I saw three formats on two different players. All right.

  When I import the MP4s or the VOBs first elements the audio goes out of sync. I did this several times, as a new project every time. I moved, renamed and re-converted MKV original. same thing happens every time.

  What can I do to keep the audio synchronized with the video?

  Please notify. Thank you.

  I would try to convert mkv to mp4 with brake hand (and it's free).

  Make sure that it is set to CONSTANT FRAMERATE.

• Audio track out of sync after importation of raw at first

  English:
  Hi there I have the following in first pro cc problem:
  I record Let's Play videos via Nvidea-Shadowplay in 1080p/60fps/30.000 Kbps
  I checked the equipment in VLC Player and all is well.
  Now, I do drag and drop the file into Adobe first CC and the audio seems to be out of sync.
  This is different. Sometimes the Audio seems to be beheind, and in other cases, it's too early.

  It is a serious problem for me, because it leads to a lot of post production audio tewaking to solve this problem.

  I have no idea how to solve this problem, because the raw material I recorded works perfectly, but the file is big
  to put on youtube, ofc.

  
  Deutsch/German:
  Hallo Leute, ich habe folgendes problem:
  

  
  

  Wenn ich Let's Play videos Shadowplay aufnehme und mir das dann material I m VLC Player betrachte sind Audio und Videospur 100% synchron.
  
  Wenn ich das material dann aber in Premiere Pro reinziehe habe ich bei Manchen, nicht bei allen videos das problem, dass die Tonspur asynchronous ist. Sometimes ist das Bild zu Fox, dann wieder der ton.

  DAS führt zu viel Zeitaufwand beim Nachbearbeiten.

  Wenn ich das video dann Raus ist make're immer noch asynchronous.

  ICH habe keine idea woran liegen konnte das...

  Vari-Productions says:

  English:
  I record Let's Play videos via Nvidea-Shadowplay in 1080p/60fps/30.000 Kbps
  I checked the equipment in VLC Player and all is well.
  Now, I do drag and drop the file into Adobe first CC and the audio seems to be out of sync.

  What you run is image variable rate (VFR) video.  ShadowPlay and any other application that uses nVidia's hardware h.264 encoders will produce VFR MP4 files.  Premiere Pro does not support the VFR vids very well at all; It is designed to handle the constant rate (CFR).

  To resolve this problem, you'll want to transcode your MP4 files using something like Handbrake on CFR versions.  I've never used Handbrake for this, but I know that others here to great success.  Search for phrases like 'VFR' and 'variable frame rate' and you should find a lot of results.

  I solved this by using the ffmpeg command line application, you can search and download from various locations.

  ffmpeg-i - hide_banner - 1 - crf 19 vsync - r 59.94 - vcodec libx264-preset copy - acodec ultrafast g 50

  If you prefer to use a GUI, then check brake hand or other tools.

• Help!  Audio goes out of sync after export.

  OK, people. I need your help. I have a looming deadline of THIS FRIDAY to put this.

  I have a multicam editing over a show that runs 1 hour 20 minutes. It renders perfectly in the timeline panel, all the video and audio perfectly synced. Looks and sounds exactly like what I need.

  When I export the video in form file H.264, audio not get synchronized with the video of 13 frames! But that's not all... It doesn't go to the complete audio track. There are about 50 minutes in the middle of the video where the audio goes out of sync. The audio at the beginning and end of the video is aligned perfectly in sync. It is just the central part which is twisted.

  What should I do?

  This has never happened before, and I have worked extensively with multicam in first Pro CC before that. Never been a problem. I tried to uninstall and reinstall the first and also remove all media cache files, but still no dice.  I also tried to copy the clips in a new sequence in the same project, copying the clips into a new sequence in a NEW project, the nesting of the sequence... nothing works.

  My configuration:

  MacBook Pro retina (Rev A)

  First Pro CC (latest version)

  Panasonic GH3 images in 1080 p 24 p AVCHD timeline

  3 cameras & 1 audio file to WAV in Multicam

  Any help would be greatly appreciated!

  OK, I figured out how to fix it:

  1. In first Pro CC, choose SEQUENCE > DELETE RENDER FILES.
  2. Try to export the movie again.

  It worked! I exported the same sequence, and it took a lot of time to do a new rendering of the audio files, but when it was finished export audio and video are in sync. I don't know what caused it, but this fix, so I hope anyone else having this problem can save a lot of time in reading this.

  See you soon!

• Audio and video out of sync after rendering

  Hey!

  I already asked a fairly identical question like this, but I have some news:

  First of all, my problem is that after the export of the audio and video is not synchronized as in the scenario. Well, many have told me that he deals with variable frame rates, because I have images is 25 frames per second and sequences with 29.97 fps. But normally first would have changed directly each element in my sequence (25 fps, 1920x1080p) settings. And later when I add the clip in MediaInfo, he also tells me that the frame rate is 25 fps constant, not Variable. So I think that this is not yet the problem more.

  But now, here's a little 'story': when I open the video after the return of his perfectly synchronized WITH the VLC Media Player (and not Windows Media Player).

  And my question is: how is this possible? Couldn't, I now just change the Standart to VLC Player and then upload it to Youtube with the normal sync? What is the difference between windows media and VLC media player in this case player? Maybe it's because I have a few Quicktime footage in my sequence, which can be read with VLC Media player and not with windows media player?

  If you have any ideas, let me know!

  Thank you

  You basically answered your own question. VLC has proved to be more versatile and superior then the WMP.

• Is it normal to get logged out of sync after closing the browser? In other words I have relog in there everytime I open Firefox.

  After I created an account, all set up and close the browser, next time I open firefox, it says set up sync, instead of sync. So I have to set up synchronization > I already have and account > I don't have the camera with me > etc.

  Windows 7 64-bit.

  Well Yes, "armor" passwords are saved in password under a Manager chrome: / / "the site" address (password Mozilla Services) and (Mozilla Services encryption key). Weave is the original name for the Firefox sync service, when it grew in 2009 and 2010 and uses this name for many internal files within Firefox.

• I export to a jpeg file and add to the cat but if I do a sync after that he wants to delete it

  If I export a raw to jpeg format in the same folder update catalog it all works, but if I do a sync folder after who want all my exported jpeg should be deleted.

  Our administrator of the LR group tried this as well and got the same results. I'm on 5.7.1 on 5.2 and we both experienced users. Because normally I export my JPEG files in a separate folder in the catalog I didn't notice it earlier, but I was actually a test for a user with a similar problem involving edit in PS and lose the tif.

  Synchronization of folders is sort of an IMPORT statement so maybe he respects the parameter "treat JPEG files files next to raw as separate photos" in the preferences.   Put him in power and see what happens.  With it turned off the synchronization will delete the Lr jpg file as you say.  With the preference off she probably should remove the photo even if there is a setting to not to in the Synchronization dialog box.  I didn't test too as far as my workflow does NOT keep jpg is the same folder as the RAWS.

  

• I try to print. Out of memory after that ID tear for 10 minutes because of the complex Illustrator image

  We have a picture of one of our customers. It has been done in Illustrator and is extremely complex. When I try to put in place 14 in InDesign to print labels, ID just tears and rips and tears and throws finally an error message saying "insufficient memory". I have about 4.5 GB available. I tried PDF, the file format and I can get a PDF file, but when I try to print our Copier, it just crashes and gives me "Acrobat is not responding" in the force quit window.

  Any thoughts? All that I can do to the Illustrator so that it will print the complex picture not so crazy?

  CS 5.5

  OS x 10.8

  With these images, I convert it to bitmap images and replace the version HAVE.