Standby Redo logs and the Directory Structure in the Backup Site

Hi guru

I just want to confirm, I know that if the directory structure is different, I need to talk about these 2 settings in the file pfile

on the main site:

DB_CONVERT_DATAFILE = 'sleep', 'primary '.

LOG_CONVERT_DATAFILE = 'sleep', 'primary '.

On the secondary Site:

DB_CONVERT_DATAFILE = 'primary', 'sleep '.

LOG_CONVERT_DATAFILE = 'primary', 'sleep '.

But I want to confirm this weather I have to deliver the full path of the directory in the two paramtere above:

as:

DB_CONVERT_DATAFILE = ' / u01/oracle/app/oracle/oradata/sleep ', ' / u01/oracle/app/oracle/oradata/primary.

LOG_CONVERT_DATAFILE = ' / u01/oracle/app/oracle/oradata/sleep ', ' / u01/oracle/app/oracle/oradata/primary.

Second Confusion: -.

After that transfer standby Redo logs creates primary and made to sleep on the foregoing, mentioned the directory structure and after restoring the alongwith primary db backup, that ensures the control file will not affect the journal of physics again placed watch on the above mentioned location.

Thanks in advance for your help

vk82 wrote:

In fact, I create the day before by using the RMAN Duplicate command. but where I am confused is the point if I transfer the backup that i taken the pri on the C:\backup_files path. and after that, I transfer the backups to the waiting on C:\backup_files. After that when I restore it will create datafile and other stuff in another directory I mentioned using DB_FILE_NAME_CONVERT as LOG_FILE_NAME_CONVERT. I think Yes but need your advice during the same period.

Hello

Yes, files should be created under the directory mentioned in the path of the parameters 'db_file_name_convert' and 'log_file_name_convert.

Kind regards
Shivananda

Tags: Database

Similar Questions

  • One group of standby Redo Log is ACTIVE

    Hi guys,.

    I have successfully configured a custodian of data between a primary database (oradb) and a database ensures Physics (oradb_s8).

    However, I have noticed that in V$ STANDBY_LOG only one group of standby Redo Log is ACTIVE, regardless of how many times I go log in the primary database.

    ' The following was stated in the documentation:

    When a switch of newspaper occurs on the database of the source again, redo incoming is then written to the next group of waiting for redo log, and the group used newspaper before again Eve is archived by a foreground ARCn process.

    Source.

    So, I guess that group of standby Redo Log is turned on when the Redo Log is enabled in the primary database.

    Could you please clarify it for me?

    It's the Oracle 11 g R2 (11.2.0.1) on Red Hat Server 5.2.

    On autonomy in standby:

    SQL > SELECT GROUP #, THREAD #, SEQUENCE #, ARCHIVED, STATUS FROM V$ STANDBY_LOG

    GROUP # THREAD # SEQUENCE # ARC STATUS

    ---------- ---------- ---------- --- ----------

    4 1 248 YES ACTIVE <-this is the only group that is still ACTIVE

    5 1 0 NOT ASSIGNED NO.

    6 0 YES 0 UNASSIGNED

    7 0 YES 0 UNASSIGNED

    SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

    V $ ARCHIVED_LOG

    SEQUENCE ORDER #;

    SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

    ---------- --------- --------- ---------

    232 06-06-SEPT.-15-15-SEP YES

    233 06-06-SEPT.-15-15-SEP YES

    234 06-06-SEPT.-15-15-SEP YES

    235 06-06-SEPT.-15-15-SEP YES

    236 06-06-SEPT.-15-15-SEP YES

    237 06-06-SEPT.-15-15-SEP YES

    238 06-06-SEPT.-15-15-SEP YES

    239 07-06-SEPT.-15-15-SEP YES

    240 YES 15-SEP-07 07-SEVEN.-15

    241 YES 15-SEP-07 07-SEVEN.-15

    242 YES 15-SEP-07 07-SEVEN.-15

    YES 243 15-SEP-07 07-SEVEN.-15

    244 YES 15-SEP-07 07-SEVEN.-15

    245 YES 15-SEP-07 07-SEVEN.-15

    246 YES 15-SEP-08 15-SEP-07

    247 15 - SEP - 08 IN-MEMORY 15-SEP-08

    16 selected lines.

    On the primary:

    SQL > SELECT SEQUENCE #, APPLIED, FIRST_TIME NEXT_TIME

    V $ ARCHIVED_LOG

    WHERE NAME = 'ORADB_S8 '.

    SEQUENCE ORDER #;

    SEQUENCE # FIRST_TIM NEXT_TIME APPLIED

    ---------- --------- --------- ---------

    232 06-06-SEPT.-15-15-SEP YES

    233 06-06-SEPT.-15-15-SEP YES

    234 06-06-SEPT.-15-15-SEP YES

    235 06-06-SEPT.-15-15-SEP YES

    236 06-06-SEPT.-15-15-SEP YES

    237 06-06-SEPT.-15-15-SEP YES

    238 06-06-SEPT.-15-15-SEP YES

    239 07-06-SEPT.-15-15-SEP YES

    240 YES 15-SEP-07 07-SEVEN.-15

    241 YES 15-SEP-07 07-SEVEN.-15

    YES 07-SEP-15 242 07-SEP-15

    YES 243 15-SEP-07 07-SEVEN.-15

    244 YES 15-SEP-07 07-SEVEN.-15

    245 YES 15-SEP-07 07-SEVEN.-15

    246 YES 15-SEP-08 15-SEP-07

    247 NO. 15-SEP-08 08 - SEPT.-15

    If you have a large DML activity on primary, you see more than one group # in v$ active standby_log.

    RFS will always try to assign the next available standby log, because your group changes # 4 are already applied, it allocates this group again after the switch.

    Check metalink doc: bug 2722195 and 219344.1

  • Standby redo logs

    Hi all

    For the installation of dataguard, supposed to docs create standby redo logs on the standby server.

    It does not mention to create logs to redo waiting on the primary server.

    So what happens if I pass of the day before?

    Then my primary db now becomes the day before db. But there is no waiting for redo logs?

    Kindly shed lights...

    Thank you very much

    JC

    Jenna_C wrote:

    Hi Sysas and ALL,

    the rule is to create a group of newspapers waiting to roll forward pending Eve more than the number of redo log group in the primary.

    Do you mean > the rule is to create a group of newspapers waiting to roll forward pending Eve more than the number of the Group of online redo logs in the primary?

    So, if I have 3 ONLINE redo log groups and 4 STANDBY redo log at the primary level, 3o + 4 s = 7

    I'll create 3 groups of online redo logs and 1 redo log group ENSURES the standby?     3O + 1 s = 4

    Why not just create everything as even with the main number?  3O + 4 s = 7 for sleep?

    Thank you.

    Sorry... If you have 3 groups of newspapers online redo (in primary and standby), and then create 4 STANDBY redo record groups (primary and standby).

    Concerning

  • Clearing Online redo logs on the physical standby of the target

    Hello

    Version 11202.

    Primer on computer a.
    Watch on computer b.

    Later note: 11.2 Data Guard physical standby failover best practices using SQL * Plus [1304939.1 ID].
     
Online redo logs on the target physical standby need to be cleared before that standby database can become a primary database.
    And later:
     
On the target physical standby run the following query to determine if the online redo logs have not been cleared...
    (1) I did not understand where I have to run the query. On computer A, computer B or?
    2)
     
         Online redo logs on the target physical standby need to be CLEARED 
       
    Which means that it must be DELETED? Does transaction could be lost by running the command of compensation?

    Thank you

    Hello again;

    I would NOT use a script. The reason is that you are not sure what "switchover_status" will be returned by the database of v$.

    Oracle a broker data available for a quick pass, but I'm from the old school and I want to see how thing works in SQL for awhile first.

    Best regards

    mseberg

  • the stubborn standby redo log

    I have a dowstreams that has four groups of log roll forward pending. one of these groups is always in a redo of the day 23/04/2010. This former roll forward is not filed, always there.
    This implies that the endorsements of the database are working with three groups of redo log and some oacaciones all that is in the active State and at this time that the view v $ archived_dest returns the error for that destination (natural).

    the question is:

    How can I eliminate this newspaper waiting for redo which is more archived.

    Thank you very much for your attention

    You have error messages in the alert log?

    See this Metalink Note:
    Alert.log watch no. standby redo Logfiles of size 153600 available blocks [405836.1 ID]

  • Standby redo logs must be configured on the primary

    Oracle 11.2.0.4, 4 CARS on primary node

    Oracle 11.2.0.4, node 4 CARS waiting

    Configured with oracle Data Guard using Data Guard Broker

    I use the latest version or orachk 12.1.0.2.4

    In the orachk report, I see the following error message:

    Standby redo logs must be configured on the primary

    +RECO/finprd1/onlinelog/group_13.2146.881183157

    +RECO/finprd1/onlinelog/group_14.2143.881183159

    +RECO/finprd1/onlinelog/group_15.5008.881183161

    +Data/finprd1/onlinelog/group_16.1660.881183161

    +RECO/finprd1/onlinelog/group_16.5003.881183161

    +RECO/finprd1/onlinelog/group_17.4999.881183163

    +RECO/finprd1/onlinelog/group_18.2096.881183163

    +RECO/finprd1/onlinelog/group_19.2094.881183305

    +RECO/finprd1/onlinelog/group_20.1778.881183305

    +RECO/finprd1/onlinelog/group_21.4994.881183307

    +RECO/finprd1/onlinelog/group_22.4992.881183307

    +RECO/finprd1/onlinelog/group_23.2049.881183307

    +RECO/finprd1/onlinelog/group_24.1454.881183309

    +RECO/finprd1/onlinelog/group_25.4983.881183309

    +RECO/finprd1/onlinelog/group_26.1688.881183309

    +RECO/finprd1/onlinelog/group_27.4973.881183311

    +RECO/finprd1/onlinelog/group_28.4969.881183311

    But when I check the primary database, I see that there are waiting for redo logs. So, why the error? Any ideas?

    [SYS@FINPRD11] SQL > select

    2 lg.group #.

    LG.type,

    3 4 lg.member

    l.bytes/1024/1024 as SIZE_MB

    Of

    5 6 7 v$ logfile lg,.

    v 8 $log l

    9 where

    10 lg.group #= l.group #.

    Union of all the

    11 12 select

    LG.Group # 13,

    LG.type 14,

    15 lg.member,

    16 st.bytes/1024/1024 as SIZE_MB

    17 of

    18 v$ logfile lg,.

    19 v$ standby_log st

    where the 20

    21 lg.group #= st.group #;

    GROUP # TYPE MEMBER SIZE_MB

    ---------- ------- -------------------------------------------------- ----------

    1 +DATA/finprd1/onlinelog/group_1.286.876507139 on LINE 512

    1 +RECO/finprd1/onlinelog/group_1.706.876507139 on LINE 512

    +DATA/finprd1/onlinelog/group_2.384.876507141 online 2 512

    +RECO/finprd1/onlinelog/group_2.737.876507141 online 2 512

    +DATA/finprd1/onlinelog/group_7.451.876507495 online 7 512

    +RECO/finprd1/onlinelog/group_7.714.876507497 online 7 512

    +DATA/finprd1/onlinelog/group_8.450.876507497 online 8 512

    +RECO/finprd1/onlinelog/group_8.1162.876507497 online 8 512

    +DATA/finprd1/onlinelog/group_5.449.876507499 online 5 512

    +RECO/finprd1/onlinelog/group_5.355.876507499 online 5 512

    +DATA/finprd1/onlinelog/group_6.448.876507499 online 6 512

    +RECO/finprd1/onlinelog/group_6.818.876507501 online 6 512

    +DATA/finprd1/onlinelog/group_3.447.876507501 online 3 512

    +RECO/finprd1/onlinelog/group_3.1188.876507501 online 3 512

    4 +DATA/finprd1/onlinelog/group_4.446.876507503 on LINE 512

    4 +RECO/finprd1/onlinelog/group_4.385.876507503 on LINE 512

    +DATA/finprd1/onlinelog/group_9.1653.881182905 online 9 512

    +RECO/finprd1/onlinelog/group_9.5058.881182905 online 9 512

    +DATA/finprd1/onlinelog/group_10.1654.881182985 online 10 512

    +RECO/finprd1/onlinelog/group_10.2206.881182985 online 10 512

    +DATA/finprd1/onlinelog/group_11.1655.881182985 online 11 512

    +RECO/finprd1/onlinelog/group_11.2205.881182987 online 11 512

    +DATA/finprd1/onlinelog/group_12.1656.881182987 online 12 512

    +RECO/finprd1/onlinelog/group_12.5045.881182987 online 12 512

    +RECO/finprd1/onlinelog/group_13.2146.881183157 EVE 13 512

    +RECO/finprd1/onlinelog/group_14.2143.881183159 EVE 14 512

    +RECO/finprd1/onlinelog/group_15.5008.881183161 EVE 15 512

    +DATA/finprd1/onlinelog/group_16.1660.881183161 EVE 16 512

    +RECO/finprd1/onlinelog/group_16.5003.881183161 EVE 16 512

    +RECO/finprd1/onlinelog/group_17.4999.881183163 EVE 17 512

    +RECO/finprd1/onlinelog/group_18.2096.881183163 EVE 18 512

    +RECO/finprd1/onlinelog/group_19.2094.881183305 standby 19 512

    +RECO/finprd1/onlinelog/group_20.1778.881183305 EVE 20 512

    +RECO/finprd1/onlinelog/group_21.4994.881183307 EVE 21 512

    22 +RECO/finprd1/onlinelog/group_22.4992.881183307 ENSURES 512

    +RECO/finprd1/onlinelog/group_23.2049.881183307 EVE 23 512

    +RECO/finprd1/onlinelog/group_24.1454.881183309 EVE 24 512

    +RECO/finprd1/onlinelog/group_25.4983.881183309 EVE 25 512

    26 +RECO/finprd1/onlinelog/group_26.1688.881183309 ENSURES 512

    +RECO/finprd1/onlinelog/group_27.4973.881183311 EVE 27 512

    +RECO/finprd1/onlinelog/group_28.4969.881183311 EVE 28 512

    41 selected lines.

    [SYS@FINPRD11] SQL > SELECT GROUP #, THREAD #, SEQUENCE #, ARCHIVED, STATUS FROM V$ STANDBY_LOG

    2;

    GROUP # THREAD # SEQUENCE # ARC STATUS

    ---------- ---------- ---------- --- ----------

    13 1 0 UNASSIGNED YES

    14 1 0 UNASSIGNED YES

    15 1 0 UNASSIGNED YES

    16 1 0 UNASSIGNED YES

    17 2 0 UNASSIGNED YES

    18 2 0 UNASSIGNED YES

    19 2 0 UNASSIGNED YES

    20 2 UNASSIGNED YES 0

    21 3 0 UNASSIGNED YES

    22 3 0 UNASSIGNED YES

    23 3 0 UNASSIGNED YES

    GROUP # THREAD # SEQUENCE # ARC STATUS

    ---------- ---------- ---------- --- ----------

    24 3 0 UNASSIGNED YES

    25 4 0 UNASSIGNED YES

    26 4 0 UNASSIGNED YES

    27 4 0 UNASSIGNED YES

    28 4 0 UNASSIGNED YES

    IT would be difficult to debug, better you trigger SR in support to verify the code. Good thing is you know again sleep exists, so why worry.

    You can ignore it.

  • REDO LOG STOP TRANSPORT MARITIMES TO THE BACKUP SITE

    Hi guru,.

    After physical creation Eve redologs are shipped and applied to standby mode. But suddenly stopped shipping redo log. I checked the main site from the log file it log archiving generates here but that is not delivered to the backup site. As I checked the pwd file is same on both sites, so I am able to connect to the db of the main site backup site.

    Can any of clarify you why it happens so.

    Thanks in advance

    From point 1 to 3, I check that all are defined

    But for pt 4 when I run the above command is as below:

    STATE ERROR

    -------------------               ---------------------------------------------------------------------

    VALID

    DISABLED ORA - 16057:DGID OF THE SERVER NOT IN THE CONFIG OF DATA HOLD

    OK, I got the error where is is LOG_ARCHIVE_CONFIG check box enabled on db primary

    I correct and now delivery is correct, but one thing which still confuse me, is that when I run the command to check the archiev applied

    SEQUENCE # FIRST_TIME NEXT_TIME APP

    APP COLUMN ALWAYS SHOWS NO standby, as well as on the primary, but before it shows why Yes

  • Many redo logs switches the line seconds on an irregular basis

    Hello

    We are 11 GR 2 RAC. We migrated a DB 10 g that used to pass on every 20-25 minutes all the

    While doing about 160 to 200 GB per day; I noticed this newly migrated DB now show

    pics of quick saves switches from time to time, for example yesterday (excerpt):

    SQL > select thread #, FIRST_TIME from v$ log_history by 2;

    ...

    1 20140524 10:19.36
    1 20140524 11:24.34
    2 20140524 11:24.35
    2 20140524 12:00.02
    1 20140524 12:00.03
    1 20140524 12:00.05
    2 20140524 12:00.08
    1 20140524 12:00.14
    1 20140524 13:06.19
    2 20140524 13:09.44
    2 20140524 14:15.46
    1 20140524 15:00.08
    2 20140524 15:00.50
    2 20140524 15:53.56
    2 20140524 16:45.37
    1 20140524 16:45.39
    2 20140524 17:43.26

    Ignore lines because of lunch at this time that I start a backup of archive logs, but to explain

    switches 11:24.34 et.35 for example, or 15:00.08 et.50, then at 16:45, where

    Do you think I should study? I have no reason why in these moments my DB suddenly

    give 3 GB of Oder, before you wait another hour to do this (e.g. between 16:45 and 17:43)...

    Everything about the fact that we are on CARS now?

    Thank you very much.

    Kind regards

    SEB

    Nothing to worry about.

    Each node in a RAC has it of own redo logs and performs his own logswitches.

    If you look for each thread (1 and 2 that correspond to the node) itself, everything is ok.

  • Creating standby Redo Log

    DB version: 11.2
    OPERATING SYSTEM: AIX 6.1

    We have a 2 RAC node. We have a disk group for all files of data, tempfiles, recovery logs... etc.
    Currently in our primary database Redo logs look like
    SQL> SELECT a.group#, b.thread#, a.member, b.bytes
FROM v$logfile a, v$log b WHERE a.group# = b.group#
order by a.group# , b.thread#  2    3  ;

         GROUP#         THREAD# MEMBER                                BYTES
--------------- --------------- -------------------------------- ---------------
              1               1 +ORCL_DG/orcl/orcl_log01.dbf         104857600
              2               1 +ORCL_DG/orcl/orcl_log02.dbf         104857600
              3               1 +ORCL_DG/orcl/orcl_log03.dbf         104857600
              4               2 +ORCL_DG/orcl/orcl_log04.dbf         104857600
              5               2 +ORCL_DG/orcl/orcl_log05.dbf         104857600
              6               2 +ORCL_DG/orcl/orcl_log06.dbf         104857600

6 rows selected.

1 member per group
3 group per instance
    We need to create a physical standby DB for DB above with real time applies. For standby Redo logs, I need a log file additional for each Instance.

    So, I'll add
    Group # 7 for thread 1
    and
    Group # 8 for thread 2

    Finally, SRls will look like

             GROUP#         THREAD# MEMBER                                BYTES
--------------- --------------- -------------------------------- ---------------
              1               1 +ORCL_DG/orcl/orcl_log01.dbf         104857600
              2               1 +ORCL_DG/orcl/orcl_log02.dbf         104857600
              3               1 +ORCL_DG/orcl/orcl_log03.dbf         104857600
              
           7               1 +ORCL_DG/orcl/orcl_log07.dbf         104857600  ------->  Additional

              4               2 +ORCL_DG/orcl/orcl_log04.dbf         104857600
              5               2 +ORCL_DG/orcl/orcl_log05.dbf         104857600
              6               2 +ORCL_DG/orcl/orcl_log06.dbf         104857600
              
           8               2 +ORCL_DG/orcl/orcl_log08.dbf         104857600  ------->  Additional
    Something wrong with my creation SRL project?

    Super good

    1 member by regular group raises a different issue.

    Generating all you need is 1.

    Best regards

    mseberg

  • Redo Log and Supplemental Logging doubts related

    Hi friends,

    I am a student extra import logging in detail. Reading a lot of articles and the oracle documentation to this topic and redo logs. But couldnot find answers some doubts...
    Please help me to delete.

    Scenario: we have a table with primary key. And we execute a query update on the table that does not use the primary key column in a clause...
    Question: in this case, the roll forward records entry generated for changes made by put request to update contain primary column values... ?

    Question: If we have a table with primary key, we need to enable additional logging on primary column of this table? If so, in what circumstances, do we need to?

    Question: If we set up replication streams on this (having the primary key) table, why do we really need to enable saving of its complementary (I read documentation saying that flow requires some then more information., but in reality what information does it. Once again this question is closely related to the first question.)

    Please suggest also any good article/site that provide inside details of the redo log and additional logging, if you know.

    Kind regards
    Lifexisxnotxsoxbeautiful...

    (1) assuming that you do not update the primary key column and additional logging is not enabled, Oracle doesn't have to log in the primary key column in the log to roll forward, just the ROWID.

    (2) is rather difficult to answer without being tautological. You need to enable additional logging if and only if you have some use downstream for additional columns in the redo logs. Rivers and streams, these technologies built above are the most common reason to enable additional logging.

    (3) If you run an update as

    UPDATE some_table
  SET some_column = new_value
 WHERE primary_key = some_key_value
   AND <>

    and look at an update statement that LogMiner relies on newspapers in recovery in the absence of additional record, basically it would be something like

    UPDATE some_table
  SET some_column = new_value
 WHERE rowid = rowid_of_the_row_you_updated

    Oracle has no need to replay the exact SQL statement you issued, (and so he doesn't have to write the SQL statement in the redo log, he doesn't have to worry if the UPDATE takes a long time to run (otherwise, it would take so much time to apply an archived log as it did to generate the log) ((, which would be disastrous in a recovery situation) etc.). He just needs to rebuild the SQL statement of the information contained in the restoration by progression, which is just the ROWID and the columns that have changed.

    If you try to execute this statement on a different database (via the stream, for example) may the ROWID on totally different destination database (since a ROWID is just a physical address of a line on disc). So adding additional record tells Oracle to connect to the primary again key column and allows LogMiner / flow / etc. to rebuild the statement using the values of the primary key for the changed lines, which would be the same on the source database and destination.

    Justin

  • Cannot archive archive a redo log because the output device is full

    Dear Experts,

    When I'm connected to the MA of my DB 11 g R2. I found the following:

    - State of the database Instance : down
    - Details
    The instance has been terminated by a database due to a deadly internal disease process, or a critical background process was killed by the user.
    Archive is unable to archive a redo log because the output device is full or inaccessible.
    - Connection of the agent to the Instance
    Status: Failed
    Details: ORA-01034: ORACLE not available

    Thank you in advance for any help you provide

    Best regards

    you do not have enough space on your disk,

    You must remove all archivelog/backup obsolete/expired:
    . make a cross-checking first:
    RMAN > obsolete report.
    RMAN > remove obsolete;
    RMAN > list expired backup;
    RMAN > list expired archivelog all;
    RMAN > delete expired backup;
    RMAN > delete all. expired archivelog
    or
    increase the space in your disk.

    To know how many days/backups are in you, the RETENTION POLICY, checking:
    RMAN > show all.

    You can change with the least number of days for example.

    HTH

  • control the size of the Essbase.log and the application log

    Understand that there are many messages have been written for the Essbase.log and the application log. Is there any method to control what message to write to the log file in order to reduce the frequency of the e/s of the partition of the server data?

    Thanks for your help!

    You can think of forcing your ASF/ASO PAG & IND/DAT files to go on a separate disk from your base volume binary Essbase. This can be difficult to do in a SAN environment, because it is difficult to know what is really where.

    Another option would be to use CLEARLOGFILE to reset the logs (this will remove the whenever you stop/restart Essbase, so make sure that you check them if you need to open a historic session).
    See: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/config/clearlogfile.htm

    Still another would be to SSLOGUNKNWON set to false to break down on the newspaper.
    See: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/config/sslogunknown.htm

    Kind regards

    Cameron Lackpour

  • Failure of the master node and the backup in VSAN 6.0

    Just curious as to what will happen to VSAN Cluster if master node and backup is omitted VSAN 6.0 cluster. Lets assume there are 10 esxi hosts in this cluster.

    It assumes that you implement a FFT = 2, which means all your VMS survive this double failure.

    Another host in the cluster will be the responsibility of the master, and the other will take responsibility of the backup.

    This may take a little longer than normal, as the new master and the backup to learn more about the configuration and rebuild the contents of the directory (that's what the backup node already for a quick conversion to master the master goes down).

    Other than that, affect without side effects.

  • I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

    I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

    I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects

    * original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.

    Hi SCS PCs

     

    I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

    http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

     

    I hope this helps.

  • I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have both the serial number

    I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have two serial numbers.  I can't find a number that strives to speak to a live person at Adobe.  I need to reduce the size of the pixel today on some photos and need the program.  Is there another way to reduce pixel if I can't get my Photoshop runs today?

    See the page linked below.  Your installation/serail number will not work.  You need to acquire a download for it with a specially assigned serial number...

    CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

Maybe you are looking for

  • CTRL keys do not work on Portege A600

    Both CTRL keys do not work in my Portege A600, I'm updating from vista to win 7 and I can´t use of keys CTRL times. in this thread talks about it, but have no solution http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40628 I con

  • HP Pavilion G7 - 1316dx reset password Adninistrator?

    I turned on the lap top yesterday and he asked my administrator password or power on password. I entered what I thought it would be, and after 3 times, it disables the system. It gives a code< 55627001="">. Does anyone have an idea on how to reset. A

  • Crash after printing photo creations

    Software Photo Creations works very well. I do what I want to do and then I print the finished product and then it hangs, freezes. I do a reboot to get it back. Twice what happened.  New Envy 4501 printer provided with the software. I downloaded it o

  • Of screen heat and hardened glass

    Hi allI am a proud new owner of the z2. As usual my first thoughts are protection accessories. I always put a glass on previous phones (g2, s5, nexus5) for better protection and sensation. My question is, is tempered glass stress the screen more than

  • C521 - changed CPU and pre-post error...

    Hello I'd love help please. I just tried to use a new processor in a C521 and the result is a light amber constant without diagnostic lights and fan at full speed. Old processor was Sempron 3400 +. New processor is Athlon X 2 5000 b (brisbane) 65 w (