Start an action sequence set by name within a native Acrobat Plugin (C++)

Similar Questions

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• Tab key to start an action

  Hello

  I would like to Catpivate to start an action when the user presses the tab key.

  Is this possible?

  I know it's possible with the action script, but with action script of captivate, I do not know how.

  Thank you

  You can try adding a button and then set the Tab key as its shortcut of typing.

  But sometimes try to use TAB as a shortcut doesn't always work because of the way some browsers of pigs shortcut keys.

• How to pragmatically set the name of the user event?

  In LabVIEW 2010, I register a user event during execution by using the function of events Reg, but I want to put the name of the user event, according to the runtime. LV said "If wire you a cluster at the entrance to the data type of the user events , LabVIEW uses the type name of the cluster in the event user name." But I need set the name of the event based on the data that is generated during execution.

  How can I pragmatically set the name of a user with data from cluster event at run time?

  I can do this by changing the text of the label of the bunch before I use Reg events function?

  How will I know what name the user never received?

  Thank you.

  I found a viable solution. I can create a user with a name known event. The event that is sent with the event data will include a Source DN string that identifies the sender of the event. The event handler can then handle each event based on the name of the Source. This is equivalent to have several unique named events, is only right they all share a common event data format, which is OK in my case.

  It works very well.

  THANKS for all the suggestions.

• How to use PL/SQL to create dynamic action to set the value of a selection by another list?

  Hello

  I would like to know how to use PL/SQL to create dynamic action to set the value of a list of selection by another selection list.

  

  I wish can create dynamic action to manage the two above the Room select list (: P9_ROOM) and building (: P8_BUILDING).

  When you select "1074" in the bathroom, building highlights like "BRM BLD 5"

  When you select 'Area of the black box' in the room, building must assign the value "7 BLD BRM"

  When the room is Null, building should also be Null.

  I thank you,

  Alice

  I forgot to mention, for the PL/SQL Code, because you are working with items in the selection list, the return values are different from the display on your LOV values, you must instead use the return values.

  Thank you

  Erick

• How to set the name of VM for VAPP instantiation

  Hello

  I'm trying to set the name for a virtual machine when its parent is instantiated VAPP from a model.  Note, I know how to change the name of the TIME itself, just not it's child VM.  The requirement to have this game during the instantiation is therefore the name of the computer in vSphere is in place.  Can someone direct me on how to do this?  Thank you.

  Hello

  in the API v0.9, it is impossible to change the name of the virtual computer on instantiation. One way to do that using dial operation, but 0.9 of the vCloud Director of Service, you are also not able to change the VM even if using the composition.

• How to set the name of the font?

  Hi guys,.

  Can U tell me how the name of font difine in flash builder?

  I want to set the name of the font.

  Please help me

  fontWeight = "bold".
  textAlign = "center".

  Thank you

  JaxNa

  fontFamily

• Dynamic action for validation of date with the notification message plugin

  Hi all

  Someone help me please with dynamic action for validation of date with the message notification plugin. I have a form with two elements of the date picker control and message notification plugin.

  The requirement first user selects the exam is finished and then selects the date. So, if the date is greater than the date of the examination is over + 2 years then doesn't trigger the message notification plugin. I tried to create that dynamic action on the date picker date that triggers the scheduled issue notification message but I want to make conditional, I mean displays the message only if date of the selected is greater than the date of the exam is finished more than 2 years.

  In terms simple, notification is displayed only if provided is superior to (date of the exam is completed + 2 years).

  I use oracle apex 4.0 version and oracle 10g r2 database. I tried to reproduce the same requirement in my personal workspace. Here are the details. Please take a look.

  Workspace: raghu_workspace

  username: orton607

  password: orton607

  APP # 72193

  PG # 1

  Any help is appreciated.

  Thanks in advance.

  Orton.

  You can get the value of the date of entry:

  $(ele) .datePicker ('getDate');

  So what to add functions such as:

  function validateNotification (d1, d2) {}

  Date1 var = $(d1) .datepicker ('getDate');

  date2 var = $(d2) .datepicker ('getDate');

  if(date1 && date2) {}

  return ((date2.getTime()-date1.getTime())/(1000*24*60*60))>(365*2);

  } else {}

  Returns false;

  }

  }

  The logic based on setting (I have two years from years of 365 days preceding)

  Then in the D.A. specify a JavaScript expression as:

  validateNotification ('P2_REVIEW_COMPLETED', this.triggeringElement.id)

  Refer to page 2 for example.

• Cannot set a default for documents pdf Acrobat XI.  Wants to stay with Microsoft Edge.  16 Windows.

  Cannot set a default for documents pdf Acrobat XI?  Wants to stay with Microsoft Edge.  16 Windows.

  Hi tenleyvan,

  Could you please if you want to XI default Acrobat open pdf documents?

  Or do you want to open pdf in Microsoft Edge?

  Do XI Acrobat default to open the PDF, right-click on any pdf file > click Open with > choose another application > select Adobe Acrobat in the list > check "Always use this app to open .pdf files" > OK

  It goes the same for Microsoft Edge, select Microsoft Edge in the list instead of Adobe Acrobat.

  Let us know if you face any problem.

  Thank you! Shivam

• How can I sequence photos in an album of Pad?  Pictures are sequenced by file name (for example, 10 C, 20 C, CN) within their folder (album) in Photoshop Elements on my PC to 10 Windows, but the sequence is disrupted on the iPad via iTunes import/synchron

  How can I, sequence, photos, in, one, pavement, album?, the, photos, are, sequenced, file, nam e, (e.g., AC, 10, AC, 20,...) (CNN), within, their, folder, (album), in, Photoshop, elements, on, my, Windows, PC 10, but sequencing, is, disturbed, to, import, /, synchronization, to, t it, Pad, via air, how, may, sequencing, PC, be maintained, soon, transfer, to, nth, Pad?  My PC operating system is Windows 10 and my iPad is version 9.2.1.  Photoshop Elements is version 10.

  There is no way to manually sequence on an iOS device.  You can import them to your computer and the sequence by using a photo application that has this feature.

  iOS: import personal pictures and videos of iOS devices to your computer

• Shipping costs: how to set the sequence for 'delivery name '?

  Hello
  
  How can I set the sequence "name of delivery." Right now, our requirement is to have an auto-numbering without interval.
  
  Thank you
  mangvoc

  System automatically generates the name of delivery under the number can be changed manually. There is a public API WSHCSPBB.pls - WSH_CUSTOM_PUB package - with the Delivery_Name FUNCTION. This public API can be easily changed/adapted to obtain the desired Delivery_Name.

• How do I either set channel name of a graph of cluster or get a 1 d waveform chart to start different time (t0) for each line of the waveform?

  I have a chart single 2D out a conditional of a loop indexing output such that over the rows of the table are not the same size. -Basically, they have different starting and ending points and sizes. -Not so concerned by the endpoints, because as soon as I get correctly starting points, everything shows fall in place.

  The challenge is that when I try to have the variable t0 (start time) for each line, the wave of construction vi form would always keep each line at the same starting point.

  I used the approach bundled with success (the cluster approach ensures that each waveform starts at different times according to the guidelines of my t0 defined for each line) but then I'm not able to get in the channel names I could make using the graphical approach (wave generation) waveform.

  In essence what I get here, I'm losing here.

  Because I don't want one of my mentors, Bob and Altenbach have fed up with me I have attached a vi this time

  Attached VI shows a combination of the two attempts (first with the waveform graph) and then with the graph of cluster

  1. with the first (graphical waveform), I get my channel names as you wish, but the alignment of the wave is not correct.

  2. with the second (graphical cluster), the alignment is good, but I can't do the names of channel in the chart, even if they are present in the cluster.

  I read some reviews that mentions that attributes can be displayed with waveform and data Dynamics (not clsuters) so I guess that's why.

  I saw another report indicating the start time for a waveform 1 d will always remain the same for the rest lines defined for the first line even if changed for the following lines in a loop.

  So I guess my question is: what is the way around questions like that?

  First of all, let me be the first to the congratulate and thank you for finally posting a code!  I'm not 100% certain I understand your question or your code, but I have an idea, perhaps, of what you want to do, so I wrote a little VI who made something simple that could be relevant.

  You mention waveforms of different lengths and beginning at different times.  You also want everyone to have a unique attribute (although I'm not sure what you want to do with the attribute).  So, I did the following:

  1. Generated an array of 100-sample random to represent one second of a waveform.
  2. Created 4 waveforms on this 100-sample basis.  The first waveform (channel 0) is just these 100 points.  The second, 1 channel, is the concatenation of string 0 with the base of 100 samples, or a waveform "double".  Channel 2 is 1 string concatenated with the base, and channel 3 is 2 string concatenated with the base.
  3. In order to trace the four channels that they rest 'on' the other, the waveform has the number of the channel added to it.  Channel 3 is 3 + (4 copies of the basis of 100 points), a waveform 400-point random centered around a shift of 3.
  4. All channels have dt value 0.01 (but I guess I could have varied, as well).
  5. To make the channels start at different times, I started channel N N seconds before channel 0 (by subtracting the index of the loop, I, T0).
  6. For each channel, I created an attribute called "Chan" equal to "Channel N" (where N = 0, 1, 2 or 3, as the case may be).

  This is the plot that results. Scale X is the absolute time value (no Date) using the 24-hour HH: mmS format.  You can see that the plots are 1, 2, 3 and 4 seconds of time, and are offset from each other by a second.  I used the trace attributes to change the name to the respective attribute.

  

  The code to do this is very simple - I almost don't need to show it, because I think it is completely described by the text above, but this is here:

  

  Now, it was not that much faster that some of your previous posts, when you refused to your postcode, "guess us" what you wanted (but not to not correctly guess), you tried to "push" us in the right direction (still refuses to post code), and no one seemed very happy?

  Bob Schor

• Combine several images via action sequences (and script?)

  My problem is quite simple.

  After that installation of the release of minutes of my 3d in photoshop (32-bit) application and changing the appearance through several CC layers in the layer modes different (e.g., hue/saturation in overlay mode) I'm done with my component printing purposes. The model is complex, with several hidden folders, single-blind CC layers and layers of the image (some with masks).

  Now the client asked me to animate the part of the image. No problem, I thought. But the trick is to know how to assemble different image sequences (diffuse, specular, reflection, masks, etc., etc.). I came with a PS action that has loaded the images simple and classified in the same way as the master file.

  But now PS does not load additional images to the batch.

  Images are named in a Diffuse_00001, Specular_00001,... fashion. The first set of loading, but Diffuse_00002, all work goes wrong and PS load files 00001 (with the exception of a file which loads the proper incremental way).

  I can't transfer anything like that on AE as it is much too complex and I don't no AE very little.

  I assumed that the PS should be able to solve this task of batch processing, but a simple gesture batch seems to fail.

  Anyone knows a solution?

  See you soon

  Thomas

  Here is a basic outline (not tested) it will be necessary to do a fantasy Action to do what you want, at the moment the action to close all four input files.

  What the script will do is open 4 files in each folder

  Your name of the action and the defined action must be changed in the code

  Once your completed action it must be only the left file to save, it will be saved as a png in Renders folder and the file closed.

  It will then repeat as abobe.

  Hope this is a start for you.

  Select folder Renders
  var inputFolder = Folder.selectDialog ("Please select makes folder");
  Set the folders
  diffuse var folder = (decodeURI (inputFolder + "/ broadcasts"));
  var specularList = folder (decodeURI (inputFolder + "/ specularList"));
  var reflection = folder (decodeURI (inputFolder + "/ reflection"));
  var alpha = folder (decodeURI (inputFolder + "/ alpha"));
  The list of files
  var diffuseList = diffuse .getFiles (/ \.) (HDR) | (exr) / $i);
  var specularList = specularList.getFiles (/ \.) (HDR) | (exr) / $i);
  var reflectionList = reflection.getFiles (/ \.) (HDR) | (exr) / $i);
  var alphaList = alpha.getFiles (/ \.) (HDR) | (exr) / $i);
  Create a loop to open and process the files
  for (var a = 0;<>
  Open all the files of four
  Open(diffuse[a]);
  Open (specularList [a]).
  Open (Reflection [a]).
  Open (alpha [a]).
  get your action name and action series
  At present, the action will have to close four files!
  doAction ("ActionName", "ActionSet");
  Do your backup etc.
  var saveFile = file (decodeURI (inputFolder + "/ Image_" + diffuse[a].name.match(/\d+/) + "png"));
  Save in png 24-bit
  SavePNG (saveFile);
  Close document
  app.activeDocument.close (SaveOptions.DONOTSAVECHANGES);
  }
  function SavePNG (saveFile) {}
  pngSaveOptions = new PNGSaveOptions();
  pngSaveOptions.embedColorProfile = true;
  pngSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
  pngSaveOptions.matte = MatteType.NONE;
  pngSaveOptions.quality = 1;
  pngSaveOptions.PNG8 = false; 24-bit PNG
  pngSaveOptions.transparency = true;
  activeDocument.saveAs (saveFile, pngSaveOptions, true, Extension.LOWERCASE);
  }

• Dynamic action - action sequence problem?

  I have a button whose action is defined by a dynamic action.
  Click on the button I want to do some pl/sql on the database, return a value in an item, and then open a url based on a value that is defined within this element.
  
  I created a dynamic action (click on the button), having 2 real actions:
  1. run pl/sql code - do some actions of database: generates a line in a table and return a value in an item (say p1_test)
  2 run javascript - open source code is a url that uses a value stored in the p1_test item.
  
  I have problem on the order of execution of these real measures: on click of a button, a new line is created in a table, the url is opened, but bad: the url address is incomplete, if I get an error that the p1_test element is not yet populated with the value.
  
  After you open an error window, the element p1_test is filled with a correct value.
  This is a problem. :( I need start by filling the value such that I defined by real action, and to open a url.
  
  Can someone help me?
  TNX

  Hello Valentina,

  using APEX 4.0 or 4.1 of the APEX?

  (a) If you use APEX 4.0, you can use the "Set value" action after your action "run the Code in PL/SQL" to read the value stored in P1_TEST from the server and place it in the P1_TEST element in the browser.

  (1) create an action 'Set value' with the type "PL/SQL Expression.
  (2) the value of the expression of pl/sql

  :P1_TEST
  

  (3) set P1_TEST as affected item.

  The JavaScript code to use $v ('P1_TEST') to read the value.

  (b) in the APEX 4.0 just use the 'Page return points' attribute of your "PL/SQL Execute Code" to return the value modified on the server to the client. If you set it to P1_TEST the modified value will automatically be returned to the browser.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Change the username on the start to something else, as the name of the computer

  I'm on a domain.
  I would like to change the username on the start menu for anything other than the username.
  User ID would be ok. Name of the computer would be even better.
  I see a number of things that could go instead.
  How is that possible?

  It would be nice to be able to customize the name of this poster in the startmenu.
  Too bad Microsoft don't think that in time there is.

  Windows XP puts the name of the person currently logged on to the system at the top of the start menu. The reason for this is to make it easier to say that the user is connected to a Windows XP system that is configured with multiple users. However, if you are the only person using the computer, you don't really need to have your name at the top of the menu start. You can remove it by using the Group Policy console (Microsoft Management Console snap-in used to edit Group Policy objects).

  1. Start the Group Policy console (Gpedit.msc).
  2. Go to User Configuration | Administrative templates | Start menu and taskbar.
  3. Find and double-click the setting remove the username from the Start Menu.
  4. Select the active option button, and then click OK.
  5. Exit the Group Policy console. The change will take place immediately.

  Note: This tip only applies to Windows XP Professional.

  Please rate me upward if you find my post helpful. Thank you!