How to set the name of VM for VAPP instantiation

Similar Questions

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to set the name of principle user lowercase and samaccoutname

  Hi Experts,

  How to ad the name of principle SAMAccountName and user provisioning got capitalized.

  How can I set up an AD of and can set attribute AD in tiny i.e. SAMAccountName and the username policy.

  Ask for your help.

  Kind regards

  David

  Have you tried to use an adapter that will use the java code to set in lowercase?  You don't have to use the default prepopulate adapters.

  -Kevin

• How to set the Destination of scanning for your Hp Printer in window - 7

  How to set the scanning for your printer Destination is a common question is asked.  I am including a useful video that will guide you in the process.

  I hope this video helps.

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the name of the font?

  Hi guys,.

  Can U tell me how the name of font difine in flash builder?

  I want to set the name of the font.

  Please help me

  fontWeight = "bold".
  textAlign = "center".

  Thank you

  JaxNa

  fontFamily

• How to set the name of resource VISA as a constant?

  I'm properly communicates with a device series using ModBus. The drop-down list on the front displays correctly COM3. I would like to remove from the drop-down list and set default COM3 on the block diagram. Can someone tell me how to do it please? Thank you very much

  Hello

  Right click on this drop-down list and select replace by, constant...

  So you can see the name of constant of Visa on the block diagram and no need to pull down...

  Pals

• How to set the delay of frame for an animation in PS?

  I've created an animation I want to convert a gif to put on a Web site. When I put the gif on the Web site and check it out there is a delay of 5 seconds or more before it starts to play. I think it's because of the delay of the frame however it is not obvious to me how I can change the delay in Photoshop. Any advice?

  My apologies for the late reply.

  It turns out I had set the animation to start 6 seconds after that that he had loaded in revolution Slider on the timeline. I put it at the beginning and it worked fine.

  Thanks for your help on this.

• How to set the time-out value for a namedcache programmatically?

  I have a cache named with near cache configuration and no expiration set in the cache configuration. The backup plan that is a distributed system has a policy of expulsion of limited size, but no expiration. I have an algorithm to determine the timeout of this cache named at run time. How can I adjust this delay on the named cache programmatically?
  
  Thank you
  Sairam

  Hi Sairam,

  You need get the plan of support for the cache and set the expiration on the support plan; assuming that the storage card is supported by the expiry.

  For example:

  NamedCache cache = CacheFactory.getCache ("test");

  CacheService service = cache.getCacheService ();
  DefaultConfigurableCacheFactory.Manager MDB = service.getBackingMapManager ((DefaultConfigurableCacheFactory.Manager));
  Map of bm = bmm.getBackingMap ("test");

  If (WB instanceof ConfigurableCacheMap)
  {
  System.out.println ("timeout setting");
  (WB) .setExpiryDelay (100000) (ConfigurableCacheMap);
  }

  -John

• How to set the zoom to 125% for the partially sighted users

  On I.E. I can set the zoom to 125% on the computer so that all I see on my screen is enlarged as discount of 25% for low vision requirements. I can't find such a framework on Firefox.

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level and set a default zoom level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or try the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• HOW TO SET THE TIME AND DATE FOR MALAGA SPAIN 29130

  TIME AND DATE FOR MALAGA SPAIN

  Hi Colin,

  Thanks for posting your query in Microsoft Community.

  • Are you referring to a zip code when you say 29130?

  I would refer to the procedure described in the article below to set the date and time in Windows 7.

  Change the display of dates, times, currencies, and measures

  You can also view: set the clock

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How to set the method of color for the logo

  Hi all,

  I would ask which is the best way to define the method of color for a logo.

  I would make a logo for the device and any support and so I want to design a logo with colors that

  will always be the same in all supported and the device.

  To achieve this how can I do?
  Who are the best guidelines to achieve that?

  I am awating your kind response.

  Bye!

  gigi71 @ wrote:

  I would make a logo for the device and any support and so I want to design a logo with colors that

  will always be the same in all supported and the device.

  This is why color management was invented. Without color management, which is probably 99.8 percent of all software and peripherals out there, there is no way it will never look the same. You have no control over this, and you will never have.

  Create the logo in sRGB and use a screen properly calibrated and profiled (and good). That's how it will look on all properly color managed platforms, if at least you have a reference of how it should look like.

  EDIT: Yes, Norman, Lab is an independent reference device as such, but does nothing to actually how it will display on all no color management devices out there.

• How to set the header properties custom for the JCA adapter

  Hello
  I need to pass DB connection information when executing BPEL to DB adapter. How can I do this?
  Aditya
  
  Published by: Aditya on May 4, 2012 16:42

  Hi Aditya,

  IMO, you shouldn't watch settings (to your DB). Instead, I would say, by the way information JNDI the runtime would be good enough for your condition. And Yes, the data sources must be configured on your server weblogic before "moving their dynamics" when running.

  You should find enough resources on the web that would guide you on dynamically configuring the jndi name.

  I hope this helps.

  See you soon!

• How to set the brightness and contrast for HP Omni 120-1125.

  You will have to troubleshoot my mother-in-law who has a HP Omni 120-1125.  Impossible to find info in the online books

  I don't know any button to change the display settings on this computer. However, I think I can help you find the equipment and audio in the control panel. I hope that all you need to do is change the setting "display by. I suspect that right now, it's on one of the icon views.

  Open the control panel and in the upper right, click the drop-down list next to "view in:

  Select "category".

  You should now see a list of categories, including equipment and audio.

  And now, I hope that the steps that I posted before will work for you. Please let me know if you encounter any problems.

• How to set the version of tartget for blackberry app building (sorry if duplicate)

  Hello

  Today I've just updated to the latest NDK via Momentics IDE 10.2.0.

  Verification to /Applications/Momentics.app I see that already the objectives here 4:

  target_10_1_0_1483
  target_10_1_0_2420
  target_10_1_0_4633
  target_10_2_0_339

  However when I build app (using 10.1 API level) inside the Momentics IDE, it uses target_10_1_0_1483, not the last 4633 a. How can I make Momentics recorgnize and use 4463 for construction of application?

  Thank you

  He solved.

  I use "Update API Levels" Momentics IDE to uninstall 10.1 SDK, it removes all the 10.1, then I install SDK 10.1 again for one last activated as the target to build.