Start Up questions among others

Similar Questions

• Windows Explorer crashes or resets whenever open the system properties, among other things

  So, recently, I had one set of questions arise in windows seven, apparently at random. It started to happen when I disabled it Internet Explorer (which I had reactivated it after that I saw coming problems) and uninstall my old antivirus (AVG Free). I also installed Windows updates not too long ago (after a long period of leave it turned off). I think it was about a week and a half ago or not.

  First of all, I noticed that the Windows Photo Viewer launches (even with the live Gallery, have not really tried the other windows live applications). After an investigation, I noticed that the dllhost.exe process would start up when I would try to launch the photo viewer, but would end not too long after. Apparently, I Live Gallery to run at startup (with anything other than HP related; it is as well as the laptop I use), but it doesn't seem to work in this case.
  Second, most of my programs installed (Mumble, the pitcher in the League of legends, steam, Skype, among other things) suddenly had to be run in compatibility mode for Windows 7... in Windows 7. Otherwise they don't start/stop working and other. Obviously, this is not good. I have not explored the question too, it's all I have on it.
  Third, whenever I open the System Properties Windows, either through my computer > properties or control panel, windows Explorer stops and restarts. Only this single window.
  I tried running sfc, who gave no results after a reboot (without reset my start ORB custom). A second performance immediately after the said nothing was wrong. I ran windows in safe mode, which seemed to have solved the issue of windows Explorer (not too sure Photo Gallery, because it cannot be run in safe mode). Since nothing seemed wrong then, I tried to run in clean boot mode, brings the issue of Explorer back, but solved the problem of Windors and Live Gallery Photo Viewer. I tried many restored system (a restore before windows update has solved my problem of Photo Viewer, but this restore point has long been lost at the time where this all started to happen all together). On a side note, I got a voip program, Mumble, to run correctly after all this happens, if I reinstall, repair or run the program in compatibility mode again.
  I spent my time recently trying to understand the issue of windows Explorer, and everything that I had going on right now is that it might have something to do with ntdll.dll
  . Here is the report of the accident event viewer and reboot:
  Log name: Application

  Source: Application error

  Date: 13/01/2014 02:50:41

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Fiora-chan

  Description:

  The failing application name: explorer.exe, version: 6.1.7601.17567, time stamp: 0x4d672ee4

  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24

  Exception code: 0xc0000374

  Offset: 0x00000000000c4102

  ID of the process failed: 0 x 3498

  Start time of application vulnerabilities: 0x01cf105d4a9207a3

  The failing application path: C:\Windows\system32\explorer.exe

  The failed module path: C:\Windows\SYSTEM32\ntdll.dll

  Report ID: 4e94424f-7c51-11e3-a854-28924a18ac7a

  The event XML:

   

     

      1000

      2

      100

      0 x 80000000000000

     

      55233

      Application

      Fiora-chan

     

   

   

      Explorer.exe

      6.1.7601.17567

      4d672ee4

      ntdll.dll

      6.1.7601.18247

      521eaf24

      C0000374

      00000000000c 4102

      3498

      01cf105d4a9207a3

      C:\Windows\system32\explorer.exe

      C:\Windows\SYSTEM32\ntdll.dll

      4e94424f-7c51-11E3-A854-28924a18ac7a

   
  I also have a crashdump also, which I have no idea how read for the life of me. I don't know if this download will work or not, but whatever.
  https://www.mediafire.com/?d5aidn8qe47id03
  I'm at a loss right now on how to solve this problem. I was planning to do a reinstall in place, but I don't have a copy of the Windows 7 disc, nor have I any DVD big enough to spare a. I have to take this laptop for repairs of the hinge, and I don't want this issue ballooning the cost of the repairs on my laptop should I take on someone to fix for me.
  I ran my new (MSE) antivirus and MalwareBytes to check for problems, and they found some (if I remember correctly, it was potential threats in internet explorer, which I use never, incidentally). After the removal of these questions, everything seems to stay the same.
  A quick response would be greatly appreciated.
  Trying not to lose sleep trying to solve this problem.
  JVenus

  Looking at the dump with WinDbg (Windows Debugger) file the module that seems to be the cause of the accident is the atiumd64.dll which is a component of the AMD graphics driver:

  WARNING: Unable to verify timestamp for atiumd64.dll
  ERROR: Module load completed but symbols can be loaded for atiumd64.dll
  Cannot load the image C:\Windows\assembly\NativeImages_v2.0.50727_64\mscorlib\88744044294787b99dd4a8704ab75a79\mscorlib.ni.dll, 0n2 error Win32
  WARNING: Unable to verify checksum for mscorlib.ni.dll
  WARNING: Unable to verify timestamp for explorer.exe
  Probably caused by: verifier.dll (auditor! VerifierStopMessage + 1f0)

  Try to uninstall then reinstall the AMD graphics driver using the latest version available.

  Try HP for the latest driver for AMD graphics for the laptop, or you can try this link AMD:

  http://support.AMD.com/en-us/download/mobile?OS=Windows

• Last night my operating system not found a set file and reloaded among other Outlook express things - is it possible to recover the address book, folders and emails?

  Last night my operating system not found a set file and reloaded among other Outlook express things - is it possible to recover the address book, folders and emails?

  original title: Outlook Express problem

  Hi John,.

  Try to locate your data from outlook express:

  Click on start-> Run & paste-> %userprofile%\Local Settings\Application Data\Identities

  You will see the folders as {xxxxxx-xxxx-xxx-xx-xxxxxxxxxxxx} click-> Microsoft-> Outlook Express, you should be able to locate the DBX files, these are the outlook database files. Ideally, you should see inbox.dbx, Sent Items.dbx... check the size of the file.

  Now to get it back on outlook express, open outlook express-> click on tools-> Options-> maintenance-> the storage location.

  Click on change location, and then select the location that you have your data in.

  For the address book, see: click Start-> Run and paste the following:

  %USERPROFILE%\Application Data\Microsoft\Address Book

  Address book with wab extension, these should reflect your Outlook Express user name.

  I hope this helps.

• My Mozilla Firefox browser does not open 4.5 sites that I use the most. That is, among other things, Gmail, Facebook, LinkedIn and other 2. I have re installed twice and got

  My Mozilla Firefox browser does not open 4.5 sites that I use the most. That is, among other things, Gmail, Facebook, LinkedIn and other 2. I have re installed twice and got a version update, but the problem is still there. Please help me, I am so worry not.

  Thank you.

  Shakeel.

  See:

  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Firefox 5 does not work with the AVG and Google toolbar, among other problems

  I downloaded Firefox 5, invited by Filehippo. Among other things, my anti-virus sw were not compatible, the Google toolbar disappeared and could not be put back because I was using an old browser! I did a system restore with the result that Firefox did not work at all. I went back to version 4, only because a guardian program requires firefox, otherwise I'd returned to Windows Explorer. It cost me a lot of valuable time.
  I tried to make this complaint under the feedback, and the button send didn't work.

  Google must update the program toolbar for Firefox 5.0.

  The 7.1.20110512W version Google toolbar works in Firefox 5.0 using the add-on Compatibility Reporter, I tried it myself because of the large number of comments on the problems of the GTB.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

• In one of the inDesign tutorials instructor pulls up what looks like an application bar that contains among other things a text editor to cut and paste the copy into the inDesign project.  That is a feature of inDesign, and how is it accessible?

  In one of the inDesign tutorials instructor pulls up what looks like an application bar that contains among other things a text editor to cut and paste the copy into the inDesign project.  That is a feature of inDesign, and how is it accessible?

  The instructor used the App Switcher on Mac to switch to a text editor and copy this text editor text. InDesign is not the active application.

• Everytime I open the preferences file damaged and is Illustrator CC reset back to the default and then change among other keyboard shortcuts.

  Everytime I open the preferences file damaged and is Illustrator CC reset back to the default and then change among other keyboard shortcuts.

  Thank you

  Hello

  We have published a fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• Photoshop CC2014: where is the toolbar, which shows the box color, RADIUS box, among other things?

  I take a class of Photoshop using Photoshop CC2014.  I can't find the toolbar that displays the box color, RADIUS, among other things.  Can someone tell me how to find them?

  All your panels are found under your menu of the window at the top of your screen. Looks like you are looking for the properties panel for the forms? Click on a layer and shape your shape tool, and you should see it. Everything is context - sensitive which means your options at the top of the screen bar will show you the options for only the currently selected tool.

• Get a "waiting...". "or"install... ". "message after sideloading a company signed app on iPad iOS 7 Mini (among others) using App Builder 3.1.0.

  Get a "waiting...". "or"install... ". "message after sideloading a company signed app on iPad iOS 7 Mini (among others) using App Builder 3.1.0. The application icon is 'weak' on iPad office with one of the two messages. The messages vary according to sync with iTunes or marketing of a stop. V30 tried affectante and v31 as Viewer versions, neither seem to work. The signing of the certificate appear to work without incident. The appropriate profile is displayed correctly in that the iPad is not displayed it is expired.

  This occurs when the mobileprovision file does not include the device ID of the device you are trying to install on. You must re-create the .mobileprovision file and make sure absolutely that the device for the devices ID are included.

  Neil

• How to make a Flash swf file. start only after all other elements are on the DW page?

  Sorry if I'm posting in the wrong forum. I didn't know if I should be here or in the forum of Dreamweaver. Just trying to figure out how to make a Flash swf file. start only after all other elements on the page have been downloaded. Is that what you would do in Flash through publication settings, or this would be finished in Dreamweaver?

  You are welcome.  I just checked and there is an onLoad parameter you can use in the BODY tag to ignite a javascript function.  I hope that's what this implies, that it is.

• I can't connect to windows. It starts in the account "other users" and request user name and password.

  When the machine starts, it takes a screen for other users.  I've never had any created user account.  When I try to recovery of windows or safe mode, it is always up to any other user.  I can't go in front of her.  Please tell me how to connect to the system

  Hi matthewmarzullo,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. you receive an error message?

  4 are. what other user account you referring?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Oracle database won't start - Interview Question? How to answer Interview in short-

  Hello people

  I am Java programmer, trying to gear to Oracle DB, attended a few Interview.

  So far in the Interview they ask this question "How do troubleshoot you if Oracle database is not running / does not start?

  Since I have no experience in real time.

  I would say that I'll go and do a TNSPING, check the Listerner.ora entries. If Windows I will tell me that I'll check Services.

  but so far, it seems that they are not happy with my answer.

  So I ask each of you to tell me how I should answer.

  I know it's the open question but how should I tell them in a nuttshell.

  Thank you

  Matt

  I am Java programmer, trying to gear to Oracle DB, attended a few Interview.

  So far in the Interview they ask this question "How do troubleshoot you if Oracle database is not running / does not start?

  Since I have no experience in real time.

  I would say that I'll go and do a TNSPING, check the Listerner.ora entries. If Windows I will tell me that I'll check Services.

  but so far, it seems that they are not happy with my answer.

  So I ask each of you to tell me how I should answer.

  I know it's the open question but how should I tell them in a nuttshell.

  Well - until now I disagree with ALL of the other answers!

  IMHO the FIRST STEP in ANY troubleshooting task is to CONFIRM that the problem really exists.

  The KEY part of this confirmation is to get ALL the information available to the person reporting the issue. In an interview which is SIMPLE - the person reporting the issue is sitting right in front of you. So instead of running around like a chicken with its head cut off you should begin by asking a few key questions:

  1. you said that the data is not running

  a. IS IT supposed TO BE running - that would be my VERY FIRST question!

  b. How do you know this? A user did report it to you? Have you tried to use yourself?

  c. How do confirm you the DB was down? Have what measures you taken?

  d. What do you mean by DOWN? Stone cold dead? Running but not accessible to business users? Running but inaccessible to anyone including DBA?

  e. what other information you have about the problem? Have you checked the log of alerts? When was the last time it was running normally? What could have happened since then to bring it down? There were backups or scheduled maintenance tasks?

  2. you said that it does not start

  a. How do you know this?

  b. did you try to start it yourself?

  c. how the restart was attempted? how much? where (what machine)?

  d. what command they use? They use 'EM? Or a console?

  (e) what has been the result? What has been the response on the console (if the console has been used) what has been the result if EM has been used?

  Your answer to that seemingly simple question should have been to about a dozen questions of your own like I did just above. There is NOTHING to do, IMHO, before getting THE news AND ALL of the one who reports the problem - that includes interviewers.

  Disappoint my more great in interviews is when otherwise intelligent people are so reluctant to ask questions to get the information they need to understand and confirm the question/problem.

  The above is why I "disagreed" with the other responses made so far. Certainly, the alerts log is important and must be checked. But it's a lot easier knowing what the person concerned (interviewer) know asking them just before starting to run. As far as we know that the interviewer was ready to tell you what the alert log say if you just ask.

  My rule #1 in an interview: ASK QUESTIONS!

  Anyone who is not asking questions in my interviews gets demerits. I can train someone how to solve problems and perform DBA tasks. But I found it almost IMPOSSIBLE to tell when they don't know something if they don't ask questions or tell me "I don't know".

  If someone just asking these questions above this would indicate to me that they know how to FIND the information they need, even if they don't know yet how to use this information.

• To start the Question?

  Hi, I bought Final Cut Studio with FCP 5 a few years for video personal edition, updated the studio for FCP7 when it came out, and memory, it came with a great tutorial from Apple Pro Training called Blue Horizon trailer. I remember what you accessed through the edit in FCP, movement, sound editing title STP and finally creating the DVDs in DSP.

  I have not used the FCP in a long time now and I start my drone video and GoPro as well as many tables with sequences DV and HDV from my son since his birth I finally want to bring together all the best clips in a movie memories.

  I come to reinstall Final Cut Studio that I continued to read THAT FCPX wouldn't my camera Sony HVR - A1E. I thought I'd go through the tutorial Apple once again as a reminder, I first noticed that the movement is disabled then thought that I should skip this part. Anyway after importing the first 4 bands, I downloaded the trail of FCPX and it is important both DV and HDV form my device without any problems. So now I am seriously considering the purchase of FCPX, before I do I just have a few questions.

  1. I noticed PLEASE get more, I have to buy something in addition to FCPX or it will do what I need?

  2. what I need to buy Motion or FCPX not good titles? Even though I have an intro video in After Effects, I would like to import into, but as his record as a. MOV, I should be able that it is sufficient to include in the FCPX scenario?

  3. do I need to buy compressor for the weird film? Most will target only YouTube, Vimoe, FB, iPad. Only the video of my son may end up on DVD.

  4. what you use today instead of DVD Studio Pro because it is not in the Mac App Store?

  Sorry that was long... I just wanted you to be aware of my needs to get the right answers, I hope.

  Thank you very much

  Nick

  Think you need to be in the Final Cut Studio forum

  Final Cut Studio

• Satellite U300 - 14Q starts plus-question of warranty

  Hello!!

  I bought my computer laptop last may in Spain, and today, I couldn't t start.
  I can start my computer t, so I m really worried about it, because I live in Berlin for 2 months.

  Can I send my computer to any service near Berlin Center? Or other service center in Germany, even if I bought it in Spain?

  I strongly need my data files that I save on my computer.
  If I open the laptop and take from inside my hard drive before sending, I don't he's losing the warranty?

  Thank you very much

  Well, Toshiba notebooks are covered by the guarantee big world so usually the ASP from Toshiba in Germany should be able to help too.

  > If I open the laptop and take from inside my hard drive before sending, I don't he's losing the warranty?
  Well, the HARD disc is placed at the bottom of the device and the cover of the HARD drive can be removed and you will not lose the guarantee. I think more details you will get from the ASP.

  But you said that your computer laptop doesn't boot.
  Please check if this will help you start Notepad;
  -Remove the battery and unplug the AC adapter
  -wait for about 30-40 min and bring together the two sides for the laptop
  -try to turn on the laptop

  If this will not help you then it s time for the ASP.

  Good luck

• Using the drive almost always at 100% at the start and sometimes at other times

  Recently, my laptop seemed particularly overwrought, even when executing threads. Whenever I start it (and also sometimes at random so that I use for light work), it is much slower than it has been in the past, and when I check the tast Manager, it says that the disc is in 90 to 100% almost every time. So I watch programs using the floppy and almost all of them use it with a rate of 0 MB/s, and all other use at a fairly slow pace. I know it's normal for notebook computers to slow down over time (mine is a little over a year old), but I wonder if it is an expected behavior. I find it odd that the drive is the treatment so furiously, but it seems to me that no program is really use it. I enclose below, pictures of my complete task manager a few minutes after starting.

  My processor is an Intel i7-4700MQ CPU @ 2.40 GHz and I have 12 GB of RAM.

  @MirandaSnow ,

  Hello and thanks for the display on the HP support forums.  What you have going here is not a hardware problem.  It is a common problem with windows 8.1 and an update.

  Here are some links that I could find that should help you with this problem.

  Use of the disk Windows 8.1 100%

  Windows 8 guard slows to grip and 100% use of the disk.

  How to fix: problem of its use for the drive 100% Windows 8

  Let me know how things are going with this.

  Thanks again for posting and have a great day.