Start up - then close

Similar Questions

• MDS Simulator starts and then closes

  I have installed Java, MDS Simulator and the BBY Simulator on a laptop. Installs it all ran without any errors. I did this for 5 or 6 other people and that you have no problems. On this machine when I go to launch the Simulator MDS the DOS window opens and closes a few seconds, I can't see the messages of. Then when I run the Simulator BBY it opens but when I try to run our application I get a communication error. On other machines the BACK area stays open and the Simulator works very well. I found an article about this type of problem and not the recommended patches and the MDS Simulator still does not work. I checked the logs on this machine and there is NO errors. I uninstalled everything and started around and it still does not work. Has anyone seen this kind of problem before?

  Thank you

  Bill

  Version 4.1.2 MDS - CS Simulator requires JDK version 1.5.  It does not work with version 1.6.

• Xbox 1 Smart glass does not. Watch Splash Screen, then closes. SmartGlass.

  My smart glass a Xbox does not open.  When you click it, it opens the start screen, then closes to the activity bar having never been opened.  It has been like that for a few days now and others are experiencing the same thing apparently.

  http://support.Xbox.com/en-us/Xbox-Live-status shows that the Smartglass application is limited on all platforms currently.

• Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Try starting with the ALT key down.  It waits for you to choose a library to open it.  If it does not open your library then there is something wrong with the library.

  Try running after have connected you to your computer under another account if it works, there is something wrong with the configuration of your account

  Try to remove and then reinstall iMovie

  Geoff.

• iTunes problem, when you start the Windows program "a problem" and asked for a report to be sent, then closes

  I downloaded the latest version of iTunes (11.2.2.) it opens but does not play my music, don't download or burn CDs, or allow access to the iTunes Store because Windows 'a problem' and request a report to send, then closes.  So, I use of course, that the report is now ignored by Windows because they are more concerned with XP Windows XP Home Edition.  It of a Windows problem or is this a problem iTunes... .to someone at - it a solution?

  You need to move to an operating system that is supported (see the risk of Running Windows XP after support ends April 2014), but Apple says iTunes works with XP service pack 3:

  

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• HP Pavilion Sleekbook 15 TS. Next Message: Preparation AutoFix and then closes.

  Our laptop 6 months old is not working - I have to return it under warranty.                  It is a HP Pavilion Sleekbook 15 TS. Next Message: Preparation AutoFix and then closes. Journal F2: Specifies the ID of hard drive failure: failure of RTQHBO-6RJ75J-6OQW03 and the software. He came with Panda 2014 Spyware, but does not start in safe mode. Any who have experienced the same problem with this computer laptop touchscreen HP and how best to solve.

  Hello

  Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  As your laptop is still under warranty, contact HP and will make repair - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• How do open Applescript AI can open the file and then run ExtendScript then close?

  Here is the code sample Applescript that I came with the help of the script guide/reference for CS6 and by doing some research online:

  Tell application "Adobe Illustrator"

  activate

  period of 10

  pfilepath the value "/ Users/username/Documents/Temp/someFile.ai".

  the pfile POSIX file pfilepath value

  Open the pfile as alias without options

  period of 10

  do javascript "#include" / Users/username/Documents/Temp/someScript.jsx ".

  delay 1

  quit smoking

  tell the end

  I just want to open the app (example here for, but also pleasant to do same for Photoshop), open a file, then run the ExtendScript file against her, and then close after treatment. With this example script, all that works is the app starts. No file not opened, any script executed, app does not close at the end. I see no error doesn't pop up or anything appear in the command prompt.

  Just ExtendScript sample triggers an alert popup for the test message

  Also note, the Applescript code snippet is executed from Python, but I think where/how it runs shouldn't matter (except perhaps where the error messages may appear). But in the worst case, I'll debug/run through the AppleScript Editor.

  Some tips on what's not here? Or is it technically correct?

  It solved here: MacScripter / POSIX Pass file path to Adobe Illustrator to run ExtendScript

• Installed Windows 10, now Word opens and then closes immediately

  When I installed Windows 10 my screen flashed constantly. Rectified that by disabling "Problem reports and Solution Control Panel" and "Windows Error Reporting Service". But now, when I tried to open my "word" it just opens and then closes immediately.

  You mean Microsoft Office Word? This forum is for Mozilla software like the Firefox browser and the Thunderbird e-mail software.

  While we are not very well informed on desktop applications, I found a Microsoft article on the use of "repair" which may help:

  https://support.Office.com/article/repair-an-Office-application-7821d4b6-7C1D-4205-aa0e-a6b40c5bb88b

  If you continue to have the same problem, I suggest using Microsoft support options: https://support.office.com/

• I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  Does anyone else have this problem?

  It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?

  I have the same problem!

• Skype opens then closes! Help please...

  Skype opens then closes! Help please...

  When I open Skype a white window opens and then it closes. On the small icons to the right to open also to the Skype logo in offline mode. (There is an arrow that goes upward, there on the taskbar), some assistance please.

  Have you uninstalled DroidCam and other applications of virtual screenshot?

  See also this:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-closes-on-startup/m-p/3478525#M290321

• opening app e-mail but in white, then closes after 20 seconds

  opening app e-mail but in white, then closes after 20 seconds

  Have you tried to force quit the mail app? Tap the home button twice. Browse the overview of messaging out of the screen to close, then single tap the home button to exit this mode.
  Try again.

  Alternatively, you can try to force your iPad to restart. Press the sleep and home for 20-30 seconds. When you see the silver Apple, release taken and let reboot then try again your mail.

• Windows8 tile problem - when I click on a tile, it opens, then closes instantly...

  Windows8 tile problem. When I click on a tile, it opens, then closes instantly. I have studied the site of Microsoft to solve this problem, but all attempts have failed. I tried to click with the right button on tile and used the feature, turn off, then I was instructed to shut down the computer, restart the computer, click with the right button on tile and select turn on, it did not work. Microft offers a COMPREHENSIVE ANALYSIS of the SYSTEM using Norton. I did and it did not resolve the tile not not opening problem. Can someone help me solve this situation. Is this a common problem with Windows 8?

  My problem has been resolved. I down loaded Windows updates more added Bing bar.

  I can open the tiles now.

  Larry

• Trying to download a game that won't play, I asked for help on the game site and they start saying "click on start and then"Run". Try as I might I can't find "run". Any suggestions

  I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?

  I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?

  It is an older version of windows.  In 7 or Vista, click Start, and then use the search box - enter the article they say "run" and press ENTER.