Startscen using an existing running agent could process

Similar Questions

• Windows 7 Installer error "Setup could not use the existing system partition because it does not contain the required free space.

  Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space.  All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation.  Tried to reformat a partition empty all reinstall Xp sp3 without result.  What can I do?

  Remove the data cable of all drives except the drive that you want to install Windows 7 on.

  Remove all external devices.

  Delete all partitions on the disk leave all of the disc as "unallocated".

  Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.

  Also: http://social.technet.microsoft.com/Forums/nb-NO/w7itproinstall/thread/1b1adc74-3d94-4897-a3c1-7aabde44fe4b

  JS
  http://www.PAGESTART.com

• During the installation of Windows 7 Ultimate, get error, "the installation program could not use the existing system partition because it does not contain the need free space."

  When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"

  If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.

• Need help with Copy-VMGuestFile: comments operations agent could not be contacted

  Hello world

  I am trying to copy and read files on a virtual machine.

  My virtual computer that is running windows server 2008 R2, VMware ESXi 5.0

  I tried the following, but it didn't work:

  Copy-VMGuestFile-Source c:\text.txt-Destination c:\ - VM VM - GuestToLocal - HostUser root collar - HostPassword

  Result:

  WARNING: The operating system prompted for the virtual machine «...» "is unknkow. The operation may fail.

  Copy-VMGuestFile comments operations agent could not be contacted.

  CategoryInfo: NotSpecified: [Copy-VMGuestFile], ViError

  FullQualifiedErrorID: Client20_VmGuestServiceImpl_GetGuestAuthentication_ViError, VMware.VimAutomation.ViCore.Cmdlets.Commands.CopyVMGuestFile

  My VM is a clean install. I have tried to look for the error, but can find no possible solution.

  Most of them is related to Invoke VMScript or the VMware tool (something that I have not installed on the virtual machine).

  Can someone help me please?

  Or can you suggest me a way to read and copy files to a virtual machine?

  Thank you in advance.

  The Copy-VMGuestFile cmdlet uses the VMware tools in the virtual machine to copy the file. If you need to install the VMware tools in the virtual machine before you can use the Copy-VMGuestFile cmdlet.

• Conversion back Office Documents using Java JDK running under Linux

  I need to convert Office Documents using Java JDK running in the Linux VM to PDF without human interaction, is this possible? How?

  It could be a service web or other solutions, but it should work on Linux and must be callable from java.

  You shot yourself in the foot because with accuracy of conversion of Office documents requires Office. Which requires Mac or Windows (preferably Windows). Solution server of Adobe's LiveCycle PDF generator. Has a Java interface, but you will need Windows server for it.

• "Error: not allowed to run the local process" during the execution of a WF in vRO7.0

  Hi all

  Need your help. We encountered a problem - "not allowed to run the local process", during the execution of a WF in vRO7.0.

  In this WF, they attempt to run the script class vRO 7.0 Server 'command. By default the Orchestrator applications having not allowed to run the command class, we get allowed by a mistake.

  To resolve this issue we need to set the system property ‘com.vmware.js.allow-local-process=true’ to the ‘vmo.properties’ properties file of the vRO 7.0 Orchestrator server.

  We already have the property to true for the properties file under ' / etc/vco/app-server " folder and after Orchestrator services are restarted. But still, we get the question.

  Another thing is that we use vRO cluster machines, so we put the real in both files to vmo.properties on both servers.

  
  

  Can you help me please how to fix?
  

  
  

  We have followed the link below.
  

  https://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.vSphere.vco_administer.doc_42%2FGUID-F4995BD2-f2f7-48C0-B239-197F27FFE693.html

  Thank you

  Miloud

  Thanks llian, complete reboot of the devices/machines vRO made the resolution.

  Now everything works fine.

  Thank you

  Miloud

• How to install Adobe on the new computer using my existing license?

  I have a Macbook Pro that is FRIED. I'm unable to retrieve my serial number Adobe Pro XI or uninstall it. I'll always be able to download on a new Windows 10 laptop using my existing Adobe license?

  Your license is valid for installation of Mac only.  I do not know if version XI qualifies for a swap of the platform, but since it was the last version without subscription, could be so you can always check with the customer and see.  A product for another language or version of trading platform

• Create a virtual machine using an existing backup [EXSi 5.0.0]

  Hello

  I've looked everywhere to find a thread that explains me to reach higher. Our ESXi is currently a backup copy using ghettoVCB and store it on an external NAS. I know that I can simply restore a backup virtual computer by using the same script, because it supports.

  But what I want to achieve is to create a separate entrance to the virtual machine by using an existing backup. I'm pretty there is a way, but I now know how to because I'm fairly new to ESXi and learn things slowly.

  All advise you will be highly appreciated and thank you in advance.

  Hello

  I finally managed to do that. I should tried before posting this discussion, but somehow he's ready now. Back to ESXi users who are finding similar questions or have a confusion on how to achieve this, you can see below the process and this;

  1. Before you copy, make sure that you have appropriate files related to the virtual machine (there should be a .vmx, hard & sometimes flat hard-000)
  2. Copy the folder to the location of data store where is your VM (generally, it will be under/vmfs/volumes/yourdatastore) using ssh and WinSCP (a tool to connect in ftp/sftp/scp).
  3. Once copied into the data store, go to the data store by visiting configuration > store > select the data store & access your virtual machine directory, then simply add the .vmx file to the inventory by clicking on the right (Note: do this when you are connected to the ESXi using vCenter IP which is the recommended way to do).

  I hope this helps!

• Running APEX application process

  Hello!

  Application process (with htp.p in it) is not running when onSubmit process page returns the error (and shown in the notification bar).

  How can I make the process to run? Or is it a bug?

  You can see example in the application of test Report 1

  Just press the "SUBMIT" button and see difference about the expression "'application process is here" at the top. "

  Thank you!

  You can do this by using a chain of substitution as mentioned above. Rather than display the results of the query of the user using lifestyle htp.p , create a USER_STYLES application point and store them in it:

  declare
    l_user_styles varchar2(4000);
  begin
    for cur in (select t.param, t.value
                    from USERDATA t
                  where t.authid = :APP_USER
                      and t.application = :APP_ID
                      and t.page = :APP_PAGE_ID) loop
          l_user_styles := l_user_styles || '#' || cur.param || ' {' || cur.value ||'}');
    end loop;
    :user_styles := '';
  end;
  

  The application can then be referenced in heads of page template using the substitution string syntax:&USER_STYLES.

  This approach is more effective than what you try to do what the style of the user information must be defined in the application element when connecting and when the styles are changed, rather than on each page show that you propose.

• Use top/left rather than webkit processing in Adobe Edge animate

  I had a nice simple interaction using Adobe Edge animate with ui jquery draggable and able to receive. You drag a region boxes in other places. Everything worked well.

  Then, I decided to add an entry for the boxes animation. That ruined because jquery draggable anime top: left: the values of your object, but somehow adding animation on board put on: left and: 0 and use webkit transformX / Y.

  So now, as soon as I start to slip, box jumps way down because movable anime top: left:, and Edge lead prevents the transformation

  Is there a way to force EA to use top: left: for animation? Note, part of the entrance of the area includes a rotation, so maybe that is why he decided to use the transformation so he could do the X / Y and turn all in one.

  Any ideas?

  I'm sorry that the blog was not helpful in this situation.  The problem is that AE, you can animate 'Top' and 'Left', but you have no control over whether that becomes a transformX/y or a change to the top of the css: left:.   AE made up his own mind.  It seems that once you something else that simply move the element (for example, rotate or scale) she decides to stop using top/left and combine it all in a single transformation including x y and rot.   AE does not let you select animate css top: left: property and also add a css to decay transformation.

  However, I found a working hack for the moment.  at the start of the operation the slide, I add a class

  {.notransition}

  -webkit-transform: none! important;

  transform: none! important;

  }

  and if the transformation is cleared and the brake works perfectly.  The strange thing is that after I drop it, I DO NOT delete the class.  It remains for the rest of the time.  Now that I think about it, it makes sense, since the transformation is zero and the upper part: left and have been modified permanently by draggable jquery-ui.

  If I ever wanted to do any other animation after that, I guess it would get very weird.

  Anyway, ability to force the x and y of the transformations to use top: left: instead of processing would be a key element for a future release (close).

• AddNode cmd failed for the secondary node: internal error of AAM - agent could not start. : unknown error HA

  I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.

  In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.

  In the release notes for vSphere, in the section known issues, I can read:

  "Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.

  When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.

  Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »

  The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.

  Thanks in advance for your support.

  Hi Caddo,

  I had the same problem with one of my hosts.  It was resolved after disabling HA on the cluster and enabling again.

  Mirko

• Skype HP7plus let me use my existing account

  I have a Skype account on my mac desktop. I'm trying to access my Skype with my HP7plus account. He keeps asking if my account "microsoft." I chose NO and it won't let me. I don't want to make another account. I want to use my existing account. Help!

  Thank you!!!

  Hi nylongirl4. I understand that you are unable to login with your existing in the Android app Skype account. It should be possible, but Microsoft has Skype they may be forcing you to link a Microsoft account, with an existing Skype account. Take a look at this document to support Skype in "you have a Skype account and you just want to connect to Skype.
  
  How can I register in Skype for Android
  
  Contact Skype support for details, if you are still having problems.
  
  I hope this helps.

• Can I buy a second Apple TV and use my existing account even information on it for use on another TV in the home? These Apple TV count as one of the "peripheral" in the application itunes/environment?

  Can I buy a second Apple TV and use my existing account even information on it for use on another TV in the home? These Apple TV count as one of the "peripheral" in the application itunes/environment?

  Yes, you can. As far as I know, you are allowed 10 devices (including iPads, iPad and Apple TV), of which 5 can be computers.

• I have all the games Age Of Empires, the versions of Windows and I changed to a Mac computers. How can I get the Mac version of the games and use my existing serial keys?

  I have all the games Age Of Empires, the versions of Windows and I changed to a Mac computers. How can I get the Mac version of the games and use my existing serial keys?

  Hello

  As you have bought Age of Empires for Windows OS, you will not be able to install the same copy of Age of Empire Windows version on Mac. However, you can contact the telephone support for confirmation on this issue.

  Here is the link:

  http://support.Microsoft.com/kb/295539