Need help with Copy-VMGuestFile: comments operations agent could not be contacted

Similar Questions

• ERROR - comments operations agent could not be contacted

  Hello

  We have a workflow that cloned clones of a paralytic, and after that VMware Tools begins in one of the virtual machines, we run a command script by using the workflow "to run the program in the comments.  We run this process of cloning several times without problem, but 1 on each ends of 5-10 with the error "failed to contact the agent of operations of comments.  Anyone know what can cause this problem or how we can implement workaround for it?

  Thank you
  Dan

  I'm not terribly sure of what could be the cause... Intermittent errors like that are always a big challenge to resolved. I can however make a suggestion on workaround. I would suggest adding to execute the program in the comments of your overall workflow of exception management... Drag a task containing a script or a logging element and drop it onto you existing call to the program in the comments of your workflow. This will create a new path with a red line (way of exception). On the program running in the comments element, you must now bind the exception to an attribute - the default name for this is "errorCode" - go come and create this attribute and use it for binding. Then pass this error code in your new logging or task scriptable element to provide feedback/indication that there was a problem and you are re - try. Add a sleep or wait that the time element (requires a wait time setting) in order to add a little break in the workflow. Then, remove the end of this exception path element and connect the last point back to the run the program in the comments of the workflow... so the flow should be something in the sense of:

  1. Regardless of prior treatment do you
  2. Clone/customize VM
  3. Run the program in the comments
     1. If exception, wait 30 seconds (or whatever the weather) and try again
     2. Eventually, a maximum number of attempts and implement a counter to track these - if max is filled, then lift the exception and/or e-mail notification
  4. End of the workflow

• "The comments operations officer could not be contacted" during an attempt to access comments just after management

  I have to install some software after the provisioning of my virtual machines.

  Just after the provisioning once the virtual machine is running, I run the workflow 'copy the file of the vco to prompt' to copy my scripts file that works perfectly, I then run the "run a program on workflow comments" which fails with the error 'comments operations agent could not be contacted.

  I know that I get this error when there is no session open on the virtual machine (I don't want to manually open a session).

  So do no open session that triggers this error or I do something wrong?

  Is it possible to log on to the comments via vCO?

  Thanks in advance

  PS: VMware tools are installed and running

  It's a Windows running, but I found my error, I asked an interactive session in my workflow... who cannot work because there is no session to interact with.

  Just put my interactive boolean false, and it works like a charm!

  Hope this can help someone.

• Desperately need help with my old Vostro 1510 which does not start!

  My old Vostro 1510 (my tried & true), I had for 7-8 years under XP Pro SP3.  Its really been a good little machine, but only started to have problems... Yesterday was the BSOD with the 07th code.  Do system restore from the command through the splash screen prompt & if necc doing the XP restore CD & same BIOS reset if being researched necc.

  So I tried to do the system restore to an earlier time with the button F8 at startup... blue screen then said that I had a windows configuration config 32 corruption & I need to use the recovery disk...

  Could not get a cd on the internal disk but finally prevailed in now the eject button then re start the computer.

  I guess it was a mistake to put the restore cd right there because nothing happened, just a black screen... I had to force close by pulling the battery because it is not closed in any other way.

  Tried to restart & it makes the usuall start noise, the "can" symbol lights up at the top of the keyboard along w / all the three symbols to "lock" near her but NOTHING happens... black screen & I cannot get the disc in the CD drive.

  I'm contemplating manually pulling the CD with a paper clip, but wanted to post my question here before I do & ruin even worse.

  I have a newer dell laptop as I expected that to meet his maker someday, but I have pictures on my old I need to save!  You think I would have a copy of these images, but of course I did not!  I don't care if old dies, but I really need these photos because they have great sentimental value.

  Can someone help me restore an old long enough to get my pictures of her?

  Thank you

  DEE

  You can try to use a Linux bootable USB to retrieve your files, see my instructions here:

  http://dellwindowsreinstallationguide.com/data-recovery-using-Fedora/

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• I need help with copy and paste does not

  I already asked this question, but no one seems to want to help or does not know the answer.  I can't afford to pay microsoft $49 help. It is their dang opertating system and you would think they would help the customers who buy their products.  Don't think!  Please, someone help me.  I am a graphic designer and need to copy and paste all the time, but it does not work.  It's so frustrating.  Should have bought a Mac time... next.  If no one here can help... where can I go for help?  Here the question again.

  Copy and paste the orders have stopped working in all my software programs (Photoshop, CorelDraw, Corel Painter, etc.).  When I type "copy", or "control c", it crashes and whatever program I use becomes inoperative, as well as all my programs, until I can get the specirfic program to close.  I ran Services.msc to ensure than the Clipboard (did not find Clipboard so I assumed it was changed to album) has been activated, which he was, but when I click on 'Start service' it says "cannot start service on local computer album.  "Error: 1068: the dependency service or group could start. It started several weeks ago and I have not installed new programs during this period.  Only my computer display was the automatic updates of Windows.  It's very frustrating... How can I copy and paste to work.  I got this computer less then 4 months.  Thank you

  To all with this problem, try this:

  http://support.Microsoft.com/kb/309662

• Need help with copy/move programs and Admin files to other users of the account.

  I created 'connect users of accounts' and 'lost' the original Admin, now I know how to access certain programs and others in shift, click with the right button on connection as an administrator. but can't seem to copy or move some things into "shared folder" can someone help me please? Thanks for any help! No real computer smart right now, but im learning :)

  Hello

  You can also try to connect to the original administrator account by pressing CTRL + ALT + DELETE (all three keys twice at the same time), you will get the classic login prompt. Type the administrator user name and password. You should be able to connect.

  To activate this visible account to the Welcome screen, once logged in click on Start-> Run Type &-> Regedit-> ok.

  Navigate to HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Windows NT-> CurrentVersion-> Winlogon-> SpecialAccounts-> UserList

  Select the username administrator and set the value to 1-> of the close Registry Editor and restart your computer.

  I hope this helps.

• Need help with copy/move a virtual machine to Mac Pro for MacBook Pro

  Hello

  I have Fusion 7.1.1 installed on my Mac Pro (lap) and my MacBook Pro (laptop). I am copying my virtual Windows machine 8.1 of the tower to the laptop. I copied the. vmwarevm file from the tower to the laptop. When I try to import the virtual machine in Fusion on the laptop it is grayed out. I don't know why 'find Virtual Machines' does not work either.

  
  

  Thanks for any help,

  
  

  Steve

  Have you tried "Open and run" in the file menu of Fusion with the 8.1 Win as target VM?

  Note that if it works, ask if it has been copied or moved. If you Copied, renewal may be necessary because the MAC address has been changed.

• I need help with a g4 pavilion operating system recovery

  Recently, I replaced the hard drive on my g4 pavilion laptop. The new hard drive doesn't do not have an operating system. I have no access to the old hard drive, but I got back up to an external memory. My question is that I'm able to use the files to restore the operating system, or do I have to order the recovery disks? OR do I have to buy the whole OS again?

  Thank you

  Alexandra

  You are the very welcome.

  First here is the link to order your laptop recovery media, where you decide to order recovery disks.

  Click on the link below and then click to expand the order recovery media line and then click on the blue button more downloads.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5148870

  Now, here's what you need to do to make your own plain version of W7 to install on your laptop by using the product key:

  Here is the link to the ISO from Microsoft W7 Home Premium 64 bit file.

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

  Make sure you get all the 3. XX GB of the file to download.  On rare occasions, it reports full download, but you do not receive the entire file.

  After you download the above file, use your option ISO burn program for burning DVDs to burn the ISO on a DVD that the DVD is bootable.

  Burn the DVD at the speed of slow burning you can.

• Need help with copy and paste in Excel

  I use Adobe 10 and I am trying to copy a PDF file that contains an image and then paste into excel. However, I want to choose only a part of the image and not the whole of the PDF document. When I do, and I tried all the options available, that it will stick to all of the data associated with the image in 1 column in excel. What I want, is to paste only the part I selected and copied into Excel as an "image." This used to work in an earlier version of Adobe, but I can't understand the do in 10.

  You probably want the instant tool that is not installed by default in Acrobat X (don't ask me why).

  To put it in your toolbar, right click on your toolbar. Select Edition > take a snapshot.

• NEED HELP WITH DVD DRIVE DON'T READ DO NOT DRIVE

  DVD player does not try to install a software, but it does not even recognize that a disk has been placed in the pilot. Think that I removed it by accident.

  Hello

  1 does happen with all disks?

  2. you get any error message?

  3. What is the brand and model of the CD\DVD driver?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

  Hope this information is useful.

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with installing XP on Satellite P200-IEE

  I mucked up my work phone thinking I could convert vista to xp by myself, questions of driver and software is the reason. I bought an xp license and have the disc.
  My laptop is a Satellite p200-IEE. I downloaded what I thought, was that drivers sata (f6flp32) put in the xp disk and drivers as above on a floppy drive.
  It goes, however, loading, ask you to press s and comes then in place with the installer of txt - oem could not be found. Any ideas of what I can do I need my laptop for work Monday morning.

  HELP Please

  There are some problems with installing xp on vista laptop... After talking to toshiba agent he's recovery discs there to put xp on as a straight install normally fails by experience.
  Some won't take only short xp. (for one, made this mistake on a new laptop!)

  Your best bet is the recovery disc and screw with vista, but do not install service pack 1 again... There are questions. Sort of a work in progress for Bill and his friends...

  Concerning

  Published by: ADMIN