Startup Repair still running after 2 hours 20 minutes.

Similar Questions

• scheduled task shutdown.exe still running after disabling SERVER 2008 R2

  Hello

  A scheduled task still running after people with disabilities (shutdown.exe/s) on my network. We have disabled the task in the Task Manager. and updated computers with gpupdate/force. However, it stops again. How can I make this stop?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Still incomplete after 8 hours trial download?

  Still incomplete after 8 hours trial download?

  Try using another browser.  You can also try to download directly via the trial versions linked through the website below.  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/tag/DDL

• Stuck in "Startup Repair" for more than 24 hours. How to get back to normal?

  Accidentally disconnected my external hard drive (my passport western digital), without disconnecting properly.  After that I connected again, with the power still on it, it asked me password of my external hard drive.  Once I entered the password as the frozen screen.  I manually turned off the laptop (sony vaio, nearly 2 years, vista pre-installed), then power.   He asks me to choose the startup repair or start normally.  I chose startup repair, need me a green-bluish screen with a blue loading bar.  Constantly load bar (move to the right on several occasions).  I let this one day and a half!  Nothing.  Off by pressing the power button.  Also, I unplugged the external hard drive thinking that was the cause of the problem.  No devices are connected to the laptop now. Power turned under.  Yet once, a black screen with text asking me to choose at startup repair or start normally.  This time I try to boot normally.  The screen is white and black for a few minutes, then an arrow cursor appears for a couple minutes, and then he brings me right to the Startup Repair choose or start normally.

  I also need to say that any action is veeeeeeeery slow.  It takes minutes just to get from one screen to the other.

  I actually pulled that momentarily to a screen with a gray window that reads "system recovery options choose a tool" with the following choices: «Startup Repair, System Restore, restore full pc windows, command prompt, windows memory diagnostic tool»  That return me to normal or the other.  Turned power off and then on again and I tried pressing F8 at startup upward.  It gives a long list of options of safe mode, etc.  I am at a loss.

  Every action I take, I find myself back to choose the Startup Repair tool or start normally.  Nothing works.  There is no way, that everything is just gone!  I didn't disconnect an external hard drive accidentally!

  Please help if possible.  Tomorrow will be the day 3 of this madness maddening, ridiculous.

  Well, it's a week or so later, here is what happened: the hard drive was dead along... Well well... According to the pc repair shop I ended up taking to.  That is why no troubleshooting worked.

  So THANKS to those who have tried to help me, but it was ultimately useless in the end.

  Computers are too sensitive if you ask me.  Certainly did not get my money's worth out of it.

• Former listeners still running after shutdown

  Hi people,

  My app has a thread with the listeners for various events (email, SMS, phone).  If I use System.exit (0) the application closes. But listeners continue to meet.  Listeners will be canceled because the App went or they will remain recorded forever?  In the case of an unhandled Exception cause App termination, restart the application causes the double declaration of each event.

  I use OS 4.7 (storm) and OS 4.5 (curve).

  If you app is no longer in the running, they will disappear after a reboot (removing the battery).

  However, a better way to manage these listeners should keep a reference to them and to remove them when the application terminates.

• FF 32.0 process still running after the closure of FF under Linux Mint.

  The application databases

  Name: Firefox
  Version: 32.0
  User Agent: Mozilla/5.0 (X 11; Ubuntu; Linux x86_64; RV:32.0) Gecko/20100101 Firefox/32.0

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: LastPass
  Version: 3.1.1
  Enabled: true
  ID: [email protected]

  Name: Mint search Enhancer
  Version: 1.0
  Enabled: true
  ID: [email protected]

  Name: elegant
  Version: 1.0.7
  Enabled: true
  ID: {46551EC9-40F0-4e47-8E18-8E5CF550CFB8}

  Graphics

  Description of the adapter: X.Org - Gallium 0.4 on AMD RS780
  Device ID: Gallium 0.4 on AMD RS780
  Driver version: 3.0 Mesa 10.1.0
  GPU accelerated Windows: 0/1 Basic
  Vendor ID: X.Org
  WebGL Renderer: X.Org - Gallium 0.4 on AMD RS780
  windowLayerManagerRemote: false
  AzureCanvasBackend: Cairo
  AzureContentBackend: Cairo
  AzureFallbackCanvasBackend: no
  AzureSkiaAccelerated: 0

  Important change preferences

  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size_cached_value: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.frecency_experiment: 4
  browser.places.smartBookmarksVersion: 7
  browser.search.useDBForOrder: true
  browser.sessionstore.upgradeBackup.latestBuildID: 20140830210550
  Browser.Startup.homepage: http://www.att.yahoo.com
  Browser.Zoom.Full: false
  dom.mozApps.used: true
  extensions.lastAppVersion: 32.0
  keyword. URL: https://duckduckgo.com/?t=lm & q =
  network.cookie.prefsMigrated: true
  Network.protocol - handler.app.apt: / usr/bin/apturl
  Network.protocol - handler.app.apt + http: / usr/bin/apturl
  Network.protocol - handler.warn - external .apt: true
  Network.protocol - handler.warn - external .apt + http: true
  places.database.lastMaintenance: 1411426705
  places. History.expiration.transient_current_max_pages: 104858
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  Print.print_bgcolor: false
  Print.print_bgimages: false
  Print.print_colorspace: default
  Print.print_downloadfonts: false
  Print.print_duplex: 0
  Print.print_evenpages: true
  Print.print_in_color: true
  Print.print_margin_bottom: 0.5
  Print.print_margin_left: 0.5
  Print.print_margin_right: 0.5
  Print.print_margin_top: 0.5
  Print.print_oddpages: true
  Print.print_orientation: 0
  Print.print_page_delay: 50
  Print.print_paper_data: 0
  Print.print_paper_height: 279.40
  Print.print_paper_name: na_letter
  Print.print_paper_size_type: 1
  Print.print_paper_size_unit: 1
  Print.print_paper_width: 215.90
  Print.print_plex_name: default
  Print.print_resolution: 600
  Print.print_resolution_name: default
  Print.print_scaling: 1.00
  Print.print_shrink_to_fit: true
  Print.print_to_file: false
  Print.print_unwriteable_margin_bottom: 56
  Print.print_unwriteable_margin_left: 25
  Print.print_unwriteable_margin_right: 25
  Print.print_unwriteable_margin_top: 25
  privacy.sanitize.migrateFx3Prefs: true
  Storage.vacuum.Last.index: 1
  Storage.vacuum.Last.places.sqlite: 1409542471

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.6
  Version: 4.10.6

  NSS
  The expected minimum version: 3.16.4 based ECC
  Version: 3.16.4 based ECC

  NSSSMIME
  The expected minimum version: 3.16.4 based ECC
  Version: 3.16.4 based ECC

  NSSSSL
  The expected minimum version: 3.16.4 based ECC
  Version: 3.16.4 based ECC

  NSSUTIL
  The expected minimum version: 3.16.4
  Version: 3.16.4

  Experimental features

  Firefox crashes or does not - how to fix in this article there is a section of troubleshooting Firefox when it blocks when closing, please see these instructions. This aid?

• Defrag always run after 36 hours... Pavillion 6387c, Go 700, ext 500Go USB

  
  

  PenDever, welcome to the forum.

  I don't think you should see the misdeeds of the stop defragmentation.  I did it several times over the years.  You might want to try using Windows Defrag to see if it works better: start / all programs / Accessories / System Tools / Disk Defragmenter.  I am not sure if HP Support Assistant use this program.

  If your problem is solved, please click "accept as a Solution.

• Startup Repair - how long is too long?

  I'm trying to startup on a Windows Vista laptop repair which starts after would have been closed normally, after what looked like a Trojan attack.  (Do not know what happened to it exactly, but my friend was not run antivirus software!)
  Startup Repair tool says 'repair disc errors. It could take more than an hour to finish", but it worked for 9 hours now, and trying to cancel it, returns the message"the repair operation cannot be undone"- is it still doing anything? It would be worthwhile to let the Startup Repair to run longer?
  Thank you

  Sorry for the not not to return to this subject at that time. In the case of the laptop, I have problems, the hard drive had to be replaced. I don't know if the HD has been the cause of the original problem, or stop the process of startup repair damaged HD.

• What happened to delays that shot of children after 1 hour, 90 min., etc.. ?

  We have always had the option of curfew. But recently, you have added the ability to cut the children once they were on the computer after an hour, 90 minutes, 30 minutes, you have chosen. Now he is gone again. What gives? I want to go back!

  Hi aka809,

  Delays in Windows Live Family Safety functionality has been changed recently. To learn more how time allowance and the curfew works, please see the link I have provided below:

  How to work the allocation of time and curfew?

  Thank you!

• Startup Repair has been running for 2 hours is it Ok? __

  My HP computere cam test-load with Vista I downloaded vista recovery and my computer sees this disc and begins to run Startup Repair. He said now 'Attempt to repair' for a little more than 2 hours.

  The Startup Repair tool is a not so you might as well close. Since you don't give any information about your computer and what you're trying to fix with the Startup Repair tool, that's as specific as I can get. If you need more, please visit:

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question MS - MVP - Elephant Boy computers - Don ' t Panic!

• For more than 24 hours running Startup Repair

  I recently installed the Win 7 64 bit on my pc nine girls.
  Unfortunately, I installed on a motherboard, I had to change. One did not support the RAM I have.
  Then I installed the new ASUS mainboard and started.
  Everything seemed to go well after loading some new drivers.
  But now the pc always very briefly see a blue screen at startup then suggesting safe mode or the Startup Repair.
  The startup repair works now for more than 24 hours and that the current repair must not be abandoned. I'm considereing to close and restart and reinstall win 7, but it is a long process, install all software. What's your tip?
  O' race he could problems drivers bee due to be installed on the motherboard first.

  Stop and do a clean install of Windows 7. You can do anything else. Make sure you have Win7 64-bit available drivers for all your hardware first. MS - MVP - Elephant Boy computers - don't panic!

• Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  I would be out of system repair and safe boot mode:

  Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• battery charge level icon disappeared (after running Startup Repair)

  Reavilion dv5-1150us, vista 64 bit, IE 8

  I've always had the icon/battery level indicator in the lower right ciorner of the screen.

  He disappeared. It does not appear when I click on 'hidden icons '.

  very recently, I had to run "startup repair" maybe that brought on this?

  Hello

  Please try:

  1.right - click on the taskbar, and then click Properties.
  2. click on the tab Notification area.
  3. under system icons, check power supply.

  Kind regards.

• After repair startup repair to locked by default

  First of all thanks to all those who are willing to help me!

  HP Pavilion Elite m9400 desktop PC (M9400t)

  Who IS under warranty I should add...

  And had weeks of waiting to talk to someone about the current number of Ticket Service. (without any luck there...)

  Finally, I did a factory restore...

  After restoring to factory settings when I click on finish and the pc restarts, he went to

  «Startup Repair checks your system for problems...»
  
  If problems are found, Startup Repair will fix automatically. Your
  computer may restart several times during this process.
  
  No changes will happen to your personal files or information. This could
  take a few minutes.
  
  Attempt to repair...
  Repair the disk errors. It could take more than an hour to finish. »
  
  This works since 06:00 this morning... So, 12 1/2 hours. You can not hit Cancel or 'x '.
  It is said
  "Startup Repair".
  Repair the current operation cannot be cancelled.
  
  What should I do?
  I don't want to use the power button to turn off unless I know its ok?
  
  I'm waiting FRO a ticket service for weeks. I get the SAME answer over and over again... It's...
  
  Pasted from the email:

  Thank you again for contacting HP Total Care.
  After reviewing the question, I understand that you have not received response from the support of advanced technology.
  I appreciate that you have passed your question once again to us and gave me the opportunity to help you in this regard.
  Please accept my apologies for the difficulties that you are experiencing with your technical questions. I assure you that your situation is not indicative of the quality of service HP is able to provide. I appreciate sincerely taking the time to share your experience with us. Your comments are very important to us and will help to make improvements.
  
  (My name...), I regret to inform you that, due to a few techniques, cling to our advanced support group not able to you contact. Therefore, I'm climbing the case once again and you will certainly receive a response as soon as possible.
  
  If you have additional questions, feel free to let me know. I'll try to do my best to help you.
  
  We always try to ensure that the problems encountered by customers are always taken care with the utmost importance. Be a valued client of HP, we appreciate your prestigious association with us.
  
  For more information on keep your HP and Compaq products up and running, please visit our Web site
  to:
  http://www.HP.com/go/TotalCare
  
  Sincerely,
  
  ****
  HP Total Care
  

  I got this exact answer even FOUR DAYS in a row. GRRRRRRRRRRRRRRRRRRR
  
  In a previous e-mail, I was told...

  That's why I'm escalating this matter to our advanced support group (upper level)
  that will come back to you will be the next possible actions in the next two to
  three days.
   

  It was there for weeks.

  I can't get that degenerate anywhere. I tell myself that it's under warranty with HP support!

  So I turn on this Forum I saw a lot of things in the past from here that worked for me or the other pc that I was working at the time.

  So my fingers are crossed and just hoping that someone will know what to do.

  THANKS A MILLION IN ADVANCE!

  (and yes I know I'm shouting!)

  I'm waiting for a response before turning off or anything like that.

  
  
  
  
  
  
  

  
  
  

  
  

  Reminder, tell them that you talked with someone yesterday and had been promised a reminder. Tell them you need the fixed unit and you think it's a bad hard drive. Don't forget to stay nice and professional on the phone, it goes a long way.

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.