States to display a string indicator

Similar Questions

• Display error string indicator messages

  Hello world

  This time, my dilemma is as follows:

  I work in a machine control application where I provide a display of error messages to show the machine Operteur some text links to the fault. I intend to use an array of strings and a logic to select the message to be displayed as a result of the fault using index string array to display the message in an indicator of the chain. Now, one of the requirements is that if by any reason the machine has a fault, all the defects that are displayed in the GUI at the same time, here is where my problems start. I show you a message by line, so I intend to use the end of the constant line with a string concatenation. I did a few tests with my idea, but the messaes fault shows a fixed line according to the position of entry her concatenate, I need the error messages to be displayed in the order that they appear.

  If someone did something like that before, or has an idea how do or if there is a better way to do that I have in mind (as explained above), I'd appreciate the help. Thank you!

  See if it works.

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• is it possible to put in place a control of the event in labview to create a string indicator when you press a button

  I'm trying to implement a user interface where an operator can set the column headers for a report and I use indicators of the string as the placement for the text in the column headers.  Given that many of them will have experience with Labview, I was hoping to set a button with the ability to add or possible delete a string indicator when you press.  Is it possible to set up an event like this?

  You cannot create an indicator of the string, but you can change the visibility of the existing volumes.

  For example, you can display an indicator of the string, giving the impression that his creating.

  /Y

• editing text in a string indicator

  I use a slide switch to set either AM or PM on my front.  How can I use an indicator of string and the text in the change of the indicator from am to PM that the position was on my slide switch?

  Hi Mitch,

  Why not use the Boolean text of the switch instead of a string indicator separated?

  Why not use a simple Select function to select between AM and PM and wire the result to the string?

  Why not use a case structure according to your switch?

  Why not use AppendTrueFalseString?

• Selected pass contains a string indicator combo box when you press the Enter key

  Hello

  How to pass selected contains a string indicator combo box when you press the enter keyboard key?

  Right now I use a button to send the command selected in the combox to string indicator.

  The photos shows a combo box with the button that I use to send to the indicator as example.

  After the user selects the text to pass, "send the cmd" button must be pressed to pass the string.

  I need to pass the selected string when the user press enter on the keyboard rather than press the button 'send cmd '.

  Kindly to you needing help.

  Hello

  You can use a structure of the event to capture keystrokes and filter, transmit only the drop-down list box "value of the indicator of channel when you press the return or enter key."

  Let me know it the joint allows an example (in LV 8.6).

• How to position programmatically multi line of text in a string indicator

  Hi all

  I have problems of command positions of multiline text programmatically in an indicator of the chain. The goal is to have X and coordinated is who will control the multiline text programmatically positioned in an indicator of the chain. So, for example if I have a line of text multi as shown below in the first box, I'd like to be able to control programmatically if I can get a comparable result shown in the second box below. Sorry that I used a simple rectangle box representative indicator of string, but I am currently not to work if I was unable to copy the actual string indicator, however I think you guys got the idea.

  Thanks a lot for helping me.

  

  All you need to do is insert (or remove) the spaces at the beginning of the lines.

• How to remove or delete the line in a string indicator?

  I have a string indicator that receives data continuously. If the number of rows in the indicator becomes 100 then receives a new line after the very 1st line 100 line will be removed and so forth... in simple terms, I need to keep only the last/final 100 lines received in the indicator. How can I do this? Kindly help me.

  Hello

  Please find the attached snapshot.

  Hope this helps

  Concerning

  David

• Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  Original title: CAPS LOCK.

  Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  There is no native parameter.  Is your keyboard led (if she has a) can be used, OR use a third party program if your keyboard does not have cpome with indicator software (probably it didn't it.)
   
  http://www.georgejopling.co.UK/CapsLock/CapsLock.html

  (Maybe that will do it for you...)

• Display a String Array in a box

  Hi all
  
  I'm developing a web application using jd 11.1.1.4
  
  In my grain of support, I have a variable of String (String []) array to store messages.
  I want to display these messages in a web page by using a dialog box
  I want to know how to display a String [] in a dialog box
  
  Thanx

  instead of an array of strings... use an ArrayList... and display... the message of dialogue by using the af:forEach

• How to display a string in number?

  I have a table with a colunm containing country names (countryVis). I'm creating a query to return the details in the table, but for the columns of this I want to go back to the following: USA as '1', '2' India, China as '3' and the Spain as "4".
  
  At present, the countryVis data type is varchar2. I try to use a decode statement to display each country as a number. This is my attempt so far. I try only for a change of the USA in number in this case.
  

  select      "IT220_HOLIDAYDETAILS"."HOLCODE" as "HOLCODE",
        "IT220_HOLIDAYDETAILS"."HOLDESCRIP" as "HOLDESCRIP",
        "IT220_HOLIDAYDETAILS"."COUNTRYVIS" as "COUNTRYVIS" 
   from      "IT220_HOLIDAYDETAILS" "IT220_HOLIDAYDETAILS"
  decode (CountryVis,'USA','USA'='1');

  From what I've read on the decode my statement should do the following:
  
  If column = USA CountryVis may
  
  USA = 1
  
  Otherwise do nothing.
  
  Is this correct or am I wrong? The error I get from this code is > > > > ORA-00933: SQL not correctly completed command
  
  Thanks in advance!

  Hello

  Try aliasing instruction box like that...

  SELECT   hdt.HOLCODE,
           hdt.HOLDESCRIP,
           hdt.COUNTRYVIS,
           CASE hdt.COUNTRYVIS
              WHEN 'USA' THEN '1'
              WHEN 'India' THEN '2'
              WHEN 'China' THEN '3'
              ELSE '?'
           END me_country
    FROM   IT220_HOLIDAYDETAILS hdt
  

  Your original SQL was wrong because you had your decode incorrect syntax and that's after the from clause.

  See you soon

  Ben

• Displaying a string instead of the "null" value in the columns of answers

  Hi, is it possible to display a string (e.g. "no data") in responses instead a NULL value in a column of a table or a PivotTable? I read everything by using the formula in the column section in the answers, but I do not understand what expression should be used... could you help me?
  
  Is this kind of possible substitution only in the web interface of answers, or still in BI Admin meta - data? I would be very interested to recognize from analysis UDML in metadata,
  Thanks in advance!

  You must do this in the business model and the Mapping layer

  Go to the properties of the column

  1. in general tab, you have "use existing columns of logic as a source.
  Select this check box. Click the period (...)
  In the formula for the column, you can add the condition of ifnull
  In this col formula editor, you can choose the logical columns.

  2. on the Data Type tab, you have the maps and logical sources
  Here too you can achieve.
  In this col formula editor, you can choose physical columns.

  Kind regards
  Rambeau

• Display the test using the output "string" indicator?

  Hi, I'm trying out the test to the indicator of string data as you can see below,

  but with 'For' the logic of loop that it is only the display last number, so if you run this, you'll see

  following output.

  Test #6

  If I move the concatenation of string outside of the loop block, you will see the result as below.

  Test #0123456

  However, I want to achieve more of output. Can someone suggest me a way to do it?

  By the way, I use the for loop.

  The output I want to display with the for loop

  Test #0

  1

  2

  3

  4

  5

  6

  Thank you

  

  Close but no cigar.

  You need concatenate the string using a shift register.

  

  This will be the output:

  

• Lower flow display of text in a string indicator.

  I need to display the test in an indicator of the string output, I see the test output

  in a display string, but it just export all text output at the end of the test.

  I want the text to scroll display more is attached.

  Basically, I want to see the output of text in real-time as soon as it is available.

  I saw on the answer to one of the close theme.

  If this is the way, can someone explain further?

  Basically, I don't how I can configure this attribute for my chain indicator mode!

  "If you want the text to scroll as it is.
  added, use the indicator string attribute node to set the scroll
  position. "

  Thank you

  Do

  Yes, as in the example.

• Change background string indicator when color in short

  Hi, I know how I can change the background color for an indicator of string by using the Text.BGColor property.

  My question is how can I change this only when the indicator is at the point, I mean when the cursor is in this area.

  As soon as the cursor will move to another indicator of the chain, I would color to follow the cursor so to speak.

  1 go to give this idea a Kudos: key Event discussion

  2. you could do something like this in a loop