Display error string indicator messages

Similar Questions

• States to display a string indicator

  Hello

  I have the vi state machine and me had created an indicator to display the current state on the front panel to indicate the status of the machine. However, I don't want it can be activated when the user clicks on it. How do I do that? It also comes with a decorative frame that I do not want to display the image. How can I remove the frame?

  I thought display just the State of a channel indicator that will fix the 2 questions, but I'm not able to simply connect to a string indicator. Is this possible? Appreciate the suggestions. Thank you.

  If you use an Enum, you can use the Format String VI.

  

• Display error in popup message

  Hello
  
  I have implemented a workflow bounded with fragments of the page. The region for the workflow is embedded in a popup, following the functional scheme of the Incorporation of the regions inside the pop-up windows .
  
  The workflow can be terminated by clicking OK or a Cancel in the page fragment button. The OK button calls a stored procedure (PL/SQL) with some of the arguments that went into the form located in the page fragment. The PL/SQL procedure can return an error message. In this case, I want to keep the popup open and display the error message in the pop-up window. On a normal page, I can do this by adding a FacesMessage to the FacesContext. But in this case, it doesn't seem to work like that. I tried the following approaches, which neither gives the desired result:
  < ul > < li > I added < tt > #{bindings.executeWithParams.execute} < /tt > as actionListener < tt > < /tt > my OK button directly. In this case, the result of the chain of my PL/SQL procedure is simply ignored. < /li >
  < li > I added a method of public Sub doSomething (ActionEvent event) < /tt > < tt > to the bean of support of the workflow, which lies on the pageFlowScope. This method then performs the execution of the method, and if the procedure returns an error, it adds the error to the FacesContext. But I see no error in my UI. < /li >
  < li > I redid my method to < tt > public < /tt > doSomething() as String and added as an action < tt > < /tt > to my button instead of < tt > < /tt > actionListener. I added a case of navigation since the fragment itself, with the name "error". The < tt > < /tt > doSomething() method adds a FacesMessage to the FacesContext, and returns 'error' If an error occurs. Still nothing in the user interface. < /li > < /ul >
  
  How can I display the error message in the PL/SQL procedure in my popup and prevent the popup to close?
  
  Best regards
  Bart kummel

  Hello

  closed model in response to a dialog box empty viewId detected for the current view of the TF. So instead of run the method to exit, he perform an activity of the method and have decide to an activity of the router where to go next. output or a page fault.

  Frank

• A single application preventing the closure of the displayed error message...

  Hello

  When I closed my laptop, the displayed error message one application preventing closing down.

  as directed by your previous post, I have set up my laptop with it, but this problem yet and still occur.

  now the error message saying Windows host prevents your stop down.

  Please, help me to overcome this problem.

  Hi Regis,

  Thanks for posting your question on the Microsoft Community forums.

  I understand that you get the error message so that the closure of the system. However, I would like to know some more information on the issue to provide you with better assistance.

  1. Who is "previous post" you are talking about?
  2. What is the exact error message you get now on "Windows"host?
  3. You did it any significant hardware or change software on the computer before this problem?

  The question may arise if certain services (including background Windows services and other third-party application services) are still in operation when you try to shut down the computer.

  The applications or programs sometimes have ongoing services which are still ongoing even if you close your programs. Properties of an instance, there are many third party messengers that require you to sign in to use the application. Thus, when you close the application, the corresponding services are sometimes even functional whereby the program restarted in less time and log into the self-signed.

  Therefore, usually do not completely quit us some programs when we literally close them and so we get these guests. To diagnose the problem, you can restart the computer in safe mode when only minimal services are in use, you should not get these guests so that closing.

  If you do not get these guests in safe mode, you can also try to boot your system in a clean boot, a selective startup in the third that most of the services are disabled. To do this, you can consult the following link:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need additional help on the issue, we will be happy to help you.

• I have the last El Captain MAC update fom and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

  I have the latest update of El captain and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

  I also got an iMac mid 2015 27 "retina and not have problems. But I have another option 'see the add screen pictures"deselected it's the ravages of a single reading. See screenshot of my graphics card.

  

• Display error message when a condition in the process page returns false

  Hello
  
  I doubt by displaying the error message in a page. In my treatment of the page, I have a process that is assosiated with
  
  a press the button. In the process, I have an 'if' condition and insert in a table when the "If" condition returns true. If
  
  It returns false that I need to display an error message like "cannot insert a value. I tried to give him in the error of process
  
  message, but it is not displaying when the if condition fails. Help, please
  
  
  Thank you
  
  TJ
  
  Edited by: tj2010 Oct 6, 2009 21:25

  Hello

  Have you tried

  If condition = true
  then
  insert into the table;
  on the other
  apex_application.g_print_success_message: = "your Message here";
  end if;

  Make sure that the branch on the page that is triggered after your process has the "success of process message includes" checked.

  Concerning

  Paul

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• Safari doesn't play videos Netfllix and gives a HDCP compatible display error

  I am able to watch netflix on any other browser. When I try to play anyv netflix videos in Safari it gives the message error "Ah, something went wrong" and HDCP compatible display error...

  Greetings Hawkdive,

  Thank you for using communities Support from Apple!

  I understand that you are not able to play videos from Netflix in Safari on your Mac, so that you can without problem using other browsers. In this case, I recommend reading over and working through the troubleshooting steps suggested in the following Help article Netflix.

  Netflix error S7363-1266-48444350

  Have a great day!

• is it possible to put in place a control of the event in labview to create a string indicator when you press a button

  I'm trying to implement a user interface where an operator can set the column headers for a report and I use indicators of the string as the placement for the text in the column headers.  Given that many of them will have experience with Labview, I was hoping to set a button with the ability to add or possible delete a string indicator when you press.  Is it possible to set up an event like this?

  You cannot create an indicator of the string, but you can change the visibility of the existing volumes.

  For example, you can display an indicator of the string, giving the impression that his creating.

  /Y

• How to simplify the code to generate custom error codes and messages

  I designed a vi that generates the error when any data entry is missing, it works correctly, but the problem is that I want to simplify, because it is part of the main program and its block diagram is great to use as such (I tried to use this vi as a Subvi in the main program, but that does not work correctly) so I need help to simplify the code or if there is no other better medium to generate the error message.

  Hello

  As shown in the previous example, to a different question of yours, it is always good to reduce with diagrams of huge block with repeated code.

  When you overwrite functionality even repeated several times, put it in a loop and run it to have recurrences of 4 or 5 of the same code.

  It will be evolving in the future.

  joined the vi changed for you.

  Note: when you want to simplify your program, isolate your code in functions, put each function inside a under vi.

  in your case, you can have the control to an empty string for all channels within a Subvi. build an array of strings and go through the subvi. Control in the sub that VI is that strings are empty.

  an array of Boolean output error. build your error string in another under vi. the wires together.

• Express dialogue VI file modifies the error string

  Hello

  today I got a strange error message form the express VI of the file dialog box (with the name of the new folder dialog box):

  1055 error has occurred in the new folder dialog box-> check if the directory exists.vi-> configure the directory path.vi-> load PS config-> program.vi Triax file.vi

  Possible reasons:

  LabVIEW: Object Reference is not valid.

  After some research, I discovered, that VI is not the source of the error, it has just changed the information received from the error in terminal.

  Is this a known problem in Labview 2011? I have not found anything.

  The expressway screws work is that they generate a real VI that will be executed whenever you change the configuration and that VI is saved as part of the VI call. You can watch the VI generated by VI right-clicking and selecting Open the front panel, which will be asked if you want to convert. If you do this and look inside the real VI she calls, you will see that it performs an unconditional call for a VI that modifies the error string. I would say this call should probably not do if it the error was true, then I would call it a bug.

  In practice, I'd say the best option is to call the primitive file of dialogue yourself or call errors to merge and put the initial mistake of wire on top or wrap all express VI into a case of error structure.

• I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  I m unable to turn on windows Defender. It displays error 0 * 800106ba. I m using microsoft security databases since then I m having this problem

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?
  Whether Windows Defender is blocked from running by them. McAfee, AVG and many others to do this.
  MSE includes features of Windows Defender inside run that separately it would be redundant.

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Outlook Express (XP) - Error Message "there was an error opening this message. An error has occurred. "When you try to open an e-mail.

  I can not open e-mails or addressbook from OE.

  When you open an email, I get the following messages, 'there was an error opening this message.  An error has occurred. "However, I can save an email on my desk (cause I can't open it) and receive the following error message while trying to open my office on the second dialog box AFTER the above message, Outlook express could not be started.  It can be installed incorrectly.  Make sure your disk is not full and you're not out of memory.  Contact Microsoft support for further assistance (0x8004104F)".  I'm not out of disk space or memory.

  When I try to open the address book within the OE, the error message says "unable to open the address book.  The AddressBook is may not be installed correctly.  I check that the WAB file is not read-only (as a matter of fact, I can open the WAB file directly by double-clicking in Explorer and email as an 'Action' very well).  Also, I check register and I have not any sharing with Outlook 2007.  I continue to receive emails and such mentioned, can send through the WAB file.

  There was an update of Windows by 18 points before it do not longer work.  I don't have a record of what has been installed.  I tried to come back a week to a previous restore point, but told me that nothing has changed.

  Help, please.  This has worked well for years.

  Remove Folders.dbx. If you can get OE open, create a new book of identity and address.

  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  The path to the message will be very similar to this:

  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• try to update to sp3 xp, get an error 8024400 a message

  When you try to upgrade to sp3, windows looks like my computer to see what I need, then I get an error 8024400 a message and a website message has encountered a problem and cannot display the page you are trying to view

  Try to download directly on your desktop, then run it. You can get SP3 from here.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  I hope this helps.

• What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  Hello

  1 how long have you been faced with this problem?

  2 have you made changes on the computer before this problem?

  3. when exactly you get this error message?

  The following threads may be useful:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-from-webpage-not-implemented/d09fa331-92c6-4CD3-bc89-9a2c03e304fe

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn