static radio
My clock radio static was when my Iphone is supported by her even if it is off at all!
Your charger is on the same circuit that your clock radio and you probably have a problem in the field.
Tags: iPhone
Similar Questions
-
Remove the noise? NON - add noise, YES!
Probably the reverse of most help requests, in fact, I want to add noise.
Here's the skinny-
I'm doing a multi-part tutorial series for a group of air traffic controllers. Most are me, sitting in a cockpit explaining the various procedures of the FAA. Part of it is listening on a radio. air traffic controllers I did air traffic controllers part, but it's all just too neat and clean and sounds like they are sitting in the cockpit next to me. What I want to achieve is the sound effect "on the radio" with all it's soft maimed and noise static.
How can I get this static noise to throw under my voice of controllers so that they sound like a speaker 5 "box they come on-line?
Thanks for your help.
Montie
You first to lighten the voice to make it 'phone' using EQ. Before using aCompressor to crush and perhaps reduce it has bit depth of 16 bit (or whatever it is now) to 8 bits. Finally, mix in a little from 'Hyacinth' bgy find a sound effect of the static radio or record some FM radio.
This plug-in free download from Izotope could help.
http://www.iZotope.com/products/audio/vinyl/
Post edited by: ryclark
-
Update- good because when the wireless radio failed to convert a wired Ethernet printer to wireless technology, or if you want your printer to support greater security WPA2 wireless.
Updated - connect to a hotel/motel/school dormitory may not work if the network uses Enterprise authentication requesting a user name and password on your computer.
This article will try to explain how to connect your wireless devices, including printers, to a wireless network when you are away from home. The problem when you're in a hotel, motel, room student or other areas is your computer connects fine, but your wireless printer, you have brought with you, has connection/security problems. Other people/wireless devices can find the printer on an open network, connect you to the printer and start printing without reason just because 'they can do. "
You'll need is a small wireless travel router. TP-LINK TL-WR702N Wireless N Nano router or other router of trip is all you need. The WR702N is available on eBay or Amazon for only $21.00, that's right, only $ 21.
This device does not support the authentication of company systems because it cannot meet any username and password prompts these system as your computer can. However, it will connect to a standard WPA SSID and your computer, but if you receive a browser for other questions page redirect, it won't work.
It's a small powerful travel router which built in 5 modes of operation (more than your home router can do):
- AP mode
- Client mode
- Repeater mode
- Router mode
- Bridge mode
The TP-WR702N information is found here:
http://www.TP-link.com/en/products/details/?model=TL-WR702N#over
To see the overview of applications see here first to understand:
http://www.TP-link.com/en/products/details/?model=TL-WR702N#app
I won't go into the details on how to configure these modes in the TP Link router Nano as the manual does a great job. One thing you must remember is that you must assign a static IP address on your wired Ethernet connection of computers to access the Web interface internal of the Nano. The Nano is configured with an Ethernet cable at any time. It's security that the router that has DHCP disabled so if you connect to a network, you won't crash it with an IP address conflict. The Nano is powered by a USB cable and comes with a USB AC adapter too.
The IP address of the Nano is default 192.168.0.254. Set your computers Ethernet Port, adapter not wireless, a static IP 192.168.0.1, 255.255.255.0 DNS address. You have to find a way to do it yourself, but it is explained in the manual and on the web for the operating system of your computer.
This leaves your wired Ethernet connection to a static IP address and your adapter wireless DHCP. Don't forget to put your wired to DHCP if you need to use it later for a wired connection. Connect the Ethernet cable from your computer to the router Nano.
Set up your browser by going to 192.168.0.254 (Nano IP address) in the address bar and you'll get the username and password login screen. The default username and password is admin/admin, you can change it if necessary.
Set the Nano bridged mode:
Other modes will be mentioned later but for now; Bridge mode will serve as this isolates and creates your own SSID private the hotel/motel/dorm room open wireless network SSID. In Bridge Mode you entrance and connect to the Rangoon SSID (paraphrasing) AND set up your own small network with your own SSID and password. Your SSID will be separated and protected through WPA2-AES security that you set up. You will be able to go online normally fine, but all of your devices will now connect to your private SSID.
Example:
Hotel SSID: HILTON Hotel Paraphrase and password: GUEST
Nano SSID: MYNETWORK Nano Paraphrase/password: HP5514
With this information, the rest is easy. You set your SSID private and password first, they you must find and connect to the SSID and password hotels. Simply click on the SURVEY button and a list of all available networks will be displayed along with their MAC addresses. Find the network SSID, you want to connect (bridge) too and click on "connect". Information is entered automatically. I suggest that you also edit your channel wireless on a fixed channel as the 1, 6 or 11, never 'auto '.
Save your settings and you will be told to restart the router. Follow the instructions and always restart the router after any changes take effect. This Nano restarts in 20 seconds approximately.
Now on your computer when you scan available networks, you will see MYNETWORK. Connect your computer to the SSID and enter your HP5514 password and you're on! Start surfing or something else.
Now, what about your printer? The printer must be set to DHCP and assuming that you have a printer wireless with front panel:
- Go to (Assistant) wireless configuration screen.
- Search for available networks.
- Select: MYNETWORK
- Enter your password: HP5514
- To connect!
In about 15 seconds, you're connected! Oh, guess what? The Nano has a WAN/LAN port and in Bridge mode, it is a LAN port that is connected to your network too! Then plug into a printer/computer Ethernet cable, if you wish.
Your printer will work as usual with no change at all. I set up in my house to test and it connected perfectly to my HP5514 wireless printer. All the tools, diagnostics, printer functions, alerts of ink were normal.
You're done!
The bottom can be used anywhere to create a local private network so that you and others can use your printer.
Now, what about the changes? If at home, you can use the Nano in Repeater mode to connect to your own network and extend the reach of all devices. Even as the Bridge mode, but you're on your network using your SSID and the word normal, so everyone can use the printer.
Don't worry what you heard with speed of execution of a router in Repeater Mode. Most routers House when running in wireless Repeater mode should be set to no encryption or WEP only. Here max speed is 54 Mbps. This Nano turns at full speed of 150 Mbps in these modes, using the highest security WPA2-AES (personal).
Remember that the size is small, so it's good to perhaps more than 50 feet. HD video streaming was impeccable and surf watch video at the same time was perfect.
I hope this help you when business or vacation. Some hotels charge for EACH device connection. With the implementation above, it takes only a charge for multiple devices, such as cell phones, iPads, light fires, computers or anything else you want to connect.
EDIT - do not forget that this Nano device has an Ethernet connection that once configured, you can use to connect a wired computer or wired Ethernet printer. It is a good radio your printer wireless doesn't have to convert a wired Ethernet wireless printer or if you want your printer to support greater security WPA2 wireless.
Have fun!
Read here on how to connect your printer to a network asking for additional security and information (username and password).
Most likely, you won't be able to connect.
-
Fix of the radio in the next firmware update
What I'd like is if they could correct the interference with radio, as recording before I start to record the station comes in perfectly but when I start to record that it is almost entirely static.
The hearing of radio headphone cables work as an antenna. Therefore replace your cables to headphones.
However recording by virtue will slightly reduce radio level reception - so if the reception is at the limit, record causes of poor quality. It is not in itself a bug.
-
Same Radio, different SSID, channel
Hello
I have two 1142Ns in stand-alone Mode. Both have a similar configuration with the exception of the static ip address. Each access point has two combinations of SSID / VLAN on each radio. An SSID is static WEP (not my choice) and the other WPA2 Personal Mode.
Originally, I had separated them so that one SSID would be available on each radio so it would be possible to distinguish the radio longer than bandwidth by SSID. I was told to change to have the two SSID on both radios.
Looking at the tags with inSSIDer, I noticed that on the same radio, two SSIDS are broadcast on the same channel.
Is only configurable at different or anything I should change in this configuration? If they are multiplexing two SSID on a canal, which cut my bandwidth down, or is - band just for the tag, not the actual data channel?
Sorry for the newbie questions. My installation is coming and I'm always trying to get up to speed on potential problems. Thank you for you account.
See the attachment for visual
Communication channels for the radio... so, if you're settings perticular channel of a Radio no SSID... Using the same channek never decreased BW but interference increases...
radio channel can be changed using the below command...
en
conf t
int dot11 0
channel? < when="" we="" use="" question="" mak,="" then="" we="" will="" find="" 11="" different="" channels="">>
end
Now, make sure that you assign different overlapping channels to different APs...
Let me know if that answers your question
Concerning
Surendra====
Don't forget to evaluate the positions who answered your question or was useful
-
Deactivation / activation of the Radio buttons
Hi all
I develop application in Oracle Application Express 5.0.0.00.31.
In my page, I created a tabular form by using the query
SELECT
"ROWID",.
'EMPNO ',.
'ENAME ',.
'STATUS ',.
"ACCEPT."
FROM "EMP".
STATUS and ACCEPT two columns are type of radio button with a static query as
STATUS: STATIC2: new; N, entitled; A, completed; D
ACCEPT: STATIC2: accept; F, rework; R
My requirement is
1. When STATUS =has ' this time then ACCEPT column boxes must be activated. (I)
2. another in('N','A') of STATUS then ACCEPT column buttons Radio must be turned off
Note: Later I hide status column. Accept that column must be specified. Based on the value of the STATE Accept column column
Radio buttons work
I put my sample application in
https://Apex.Oracle.com/pls/Apex/f?p=28020
workspace: myspace77
user: comments
password: apex_demo
-What someone will help me in this regard?
Thanks in advance.
Kind regards
Colette
Hi Colette.
Check your Application-> Page 1 28020. I've implemented the toggle the radio button.
Here are the steps to accomplish the toggling the buttons in table form:
- Added STATUS column with alias STATUSD in the form of your table.
- Added real action "Run the Code JavaScript" in your dynamic action "updating of the form: turn radio buttons:
Action: Run the JavaScript Code
Fire on loading the Page: Yes
Code:
$('th#STATUSD').hide(); $('td[headers="STATUSD"]').hide(); $('td[headers="STATUSD"]').each(function() { var row_val = $(this).text(); var row = $(this).closest('tr'); if (row_val == 'N' || row_val == 'A') { row.find('td[headers="ACCEPT"] input[type="radio"]').attr("disabled", true); } else { row.find('td[headers="ACCEPT"] input[type="radio"]').removeAttr("disabled"); } });
Assigned items: no
Kind regards
Kiran
-
Disable the radio in a table button
Hi all
I develop application in Oracle Application Express 5.0.0.00.31.
In my page, I created a tabular form by using the query
SELECT
"ROWID",.
'EMP_ID,'
"EMP_NAME,"
"EMP_STATUS."
OF ' #OWNER # '. " EMPLOYEE. "
Here Emp_status is of type radio button with a static query as
STATIC: new; N, active; A inactive; I relived; R, have ended. T
My requirement is
1. that the status (Emp_status) in I, R, T must be updated capable (Enable) to update
2 disable the State N, has
How is tabular.
Thank you
Su.GI
Su.GI wrote:
By clicking on apply changes, it reveals an error in my application...
https://Apex.Oracle.com/pls/Apex/f?p=9067:1
error report:
ORA-20001: Error recovering the value of the column: ORA-01403: no data found
ORA-06510: PL/SQL: not supported by the user-defined exception
This is because all radio buttons are disabled in a few lines of the form. Use a dynamic action before submitting to re - activate the boxes option disabled before the page is sent.
Event: Before the Page is sent
Real Action
Action: Enable
Fire on Page load: Yes
Selection type: jQuery Selector
jQuery Selector : td [headers = 'Emp_status'] input [disabled]
A requirement more
I need to activate only Relived and Terminated radio button for recording that inactive status I.
For other files, all buttons are disabled.
Change the dynamic action after Refresh for:
Event: After refresh
Selection type: Region
Region:
Real Actions
Action: Disable
Fire on Page load: Yes
Selection type: jQuery Selector
jQuery Selector : td [headers = 'Emp_status'] [type = "radio"]
Action: Enable
Fire on Page load: Yes
Selection type: jQuery Selector
jQuery Selector : td [headers = 'Emp_status'] input [value = 'I'] [checked] ~ input [value = "O"], td [headers = 'Emp_status'] input [value = 'I'] [checked] ~ [value = "T"] entry
-
How to set the default value for the Group of radio buttons
Hello
Here's my situation.
I have a form of HTML text. In the form, I have an element called "* drinks * ' and its options in the radio button group or coffee, tea. Now, I want to put a default value("NA") to the radio of drinks group. Is it feasible. If so, how. Advice would be useful. Thank youHello!
You can also set a default value in the radio unit of page article under the default setings. Here, you must put the result value (if you have static: Café;) One, the; B, NA; C you write C if you want NA default choice) of your radio.
concerning
-
Hello!
(Version 4.0.2 of the APEX)
I need definition LOV that returns multiple values for a display value. For example, when I select the return value TV is 1, when I select RADIO return value is 2. And when I select what I want to return to the 1 and 2 values.
List of values definition should be something like this:
STATIC: All; (1,2), TV, 1, RADIO, 2
Is this possible? Without any plugin, like SuperLov...
Thank you!Dark salvation,
Maybe this thread could help?
Kind regards
Sandro -
The items in the Group Radio poster pictures - APEX 4.1.1?
Hi all
How can you display an image in addition to the display value for a group of radio element?
Request Express 4.1.1.00.23 in use on Oracle 11 g 2.
Clients are Internet Explorer 8 <.
I have five pieces of a static lov radio group.
Each list item must show an additional image (png type) that is stored in the form of app_image.
Examples for an article:
LOV display value:
"Podium" | #APP_IMAGES #podium.png '
Display the page of the radio group element:
"Podium" | wwv_flow_file_mgr.get_file? p_security_group_id = 3472010183987334 & p_flow_id = 104 & p_fname = 'podium.png'
LOV display value:
"Podium < IMG src =" #APP_IMAGES #podium.png ".
Display the page of the radio group element:
"' Podium < img src =" wwv_flow_file_mgr.get_file? p_security_group_id = 3472010183987334 & p_flow_id = 104 & p_fname = podium.png "" alt = "Podium" / > "
Kind regards
Franz LangnerHi Franz.
for your group page element radio set the attribute 'Escape special characters' (Soussecurite) 'no '. Please keep in mind that it makes your application potentially vulnerable to XSS attacks if the radio group values can be entered by end users.
Concerning
Patrick
-----------
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
Hi all!
I am looking for a way to make a radio button to change the background color of the 'radio' when it is active.
I'm processing to do with CSS, but I can't get what I want.
Here's the way I'm putting.
Option buttons do in stage Builder.radio-button .radio:focused { -fx-background-color: red;
You will find simply in other ways, but I could not... Someone help me?
Thank you all/* radio.css place in same location as RadioCssTest.java and ensure build system copies it to your output directory */ #red-dot .radio-button:selected .dot { -fx-background-color: -fx-mark-highlight-color, red; -fx-background-insets: 0 0 -1 0, 0; } #red-radio .radio-button:selected .radio { -fx-color: red; }
import javafx.application.Application; import javafx.scene.Scene; import javafx.scene.control.RadioButton; import javafx.scene.layout.VBox; import javafx.stage.Stage; public class RadioCssTest extends Application { public static void main(String[] args) { launch(args); } @Override public void start(Stage stage) throws Exception { VBox layout = new VBox(10); layout.setStyle("-fx-padding: 10; -fx-background-color: cornsilk;"); RadioButton redRadio = new RadioButton("red-radio"); redRadio.setId("red-radio"); redRadio.setSelected(true); RadioButton redDot = new RadioButton("red-dot"); redDot.setId("red-dot"); redDot.setSelected(true); RadioButton normalRadio = new RadioButton("normal-radio"); normalRadio.setSelected(true); layout.getChildren().addAll(redRadio, redDot, normalRadio); Scene scene = new Scene(layout); scene.getStylesheets().add(getClass().getResource("radio.css").toExternalForm()); stage.setScene(scene); stage.show(); } }
-
CheckBox and radio button text color
Hello
This could be a very simple question, but I can't find the answer anywhere?
How can I change the color of the labels on the radio buttons and checkboxes?
I tried this:
a1.setStyleProperty("textColor",0x990000);
but I get this error:
1061: Call to a possibly undefined method setStyleProperty through a reference with static type fl.controls:RadioButtonGroup.
can anyone help?
Thank you! : )
You must use the TextFormat class to assign the text formatting...
var newFormat:TextFormat = new TextFormat();
Regardless of the font styles to applynewFormat.color = 0xFF0000;
A1. SetStyle ("textFormat", newFormat);
-
Hi, I added option button and group fail over, following the example on Oracle's Web site
My radio button are not added to the Group of rocker. I always choose all three choices. If I set the button toggle group and radio in the initialze() of my control class, everything works fine. I wonder if I miss anything in FXML. I can't understand. If anyone knows, please help.<VBox> <fx:define> <ToggleGroup fx:id="myToggleGroup"/> </fx:define> <children> <RadioButton text="A" toggleGroup="$myToggleGroup"/> <RadioButton text="B" toggleGroup="$myToggleGroup"/> <RadioButton text="C" toggleGroup="$myToggleGroup"/> </children> </VBox>
Thanks in advance.This example works fine for me:
package test; import javafx.application.Application; import javafx.fxml.FXMLLoader; import javafx.scene.Parent; import javafx.scene.Scene; import javafx.stage.Stage; public class Test extends Application { @Override public void start(Stage primaryStage) throws Exception { FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("test.fxml")); Scene scene = new Scene((Parent)fxmlLoader.load(), 640, 480); primaryStage.setScene(scene); primaryStage.show(); } public static void main(String[] args) { launch(); } }
Maybe you do something different in your loader code?
-
RadioGroup, radio buttons in the criteria of cursor
With the help of FORMS 10.1.2.0.2
I have radiogroup with about 15 radio buttons. The value of the value of radio buttons can be alphanumeric - 100, 200, A200, B200, etc..
I have a cursor on a button pulled the trigger. The cursor will query the table of data I need based on a few criteria (in the where clause). I need one of the criteria to the value of the option buttons.
I tried
and all return 0 records.where xyz = ':control.abc_radiogroup' or where xyz =:control.abc_radiogroup or where xyz =':control.abc_radiogroup.value'
EDIT:
but, static
works perfectly.where xyz = 'A200'
So, my question is how to get the value of the radio button to my cursor criteria?
Thank you.
Published by: apex_disco on November 16, 2011 09:59If it works:
where xyz = "A200"
so I can only imagine that your radio button does not have the same value. Maybe a space end or something?
It works when you select A200?for r in ( select 'A200' value from dual where :control.abc_radiogroup = 'A200' ) loop message('Result: '||r.value); end loop;
If so, it must be something else in your select statement which causes no records to retrieve. What the statement is complete?
You have a trigger when Radio change which also changes some values used in the cursor?
Published by: InoL on November 16, 2011 15:51
-
Show/hide subform with Radio
I try to get a subform to be initially hidden and visible only when one of the option buttons are selected. I looked and looked on these forums and tried all the different combinations, but none work. I have radio buttons in a subform that is different then the elements want to hide. Any help would be great. Here is an example of what I have. Form1. Design1.ITManQuest.ITMan::change - (JavaScript, client) (this is where I put the script) if (this.rawValue == '1') {Design1.Routing.Signatures.ITSignSub.presence = 'visible' ;} else {Design1.Routing.Signatures.ITSignSub.presence = "hidden" ;}
Thank you, download it now
Looks like you are hiding a few lines in the following table when you click No on the radio at the top group? If Yes, then you must save the PDF dynamic form. At the moment its registered in static pdf. Nothing will happen when you click on no, the provision cannot be changed to static pdf of the way you are trying to do. Just resave as dynamic and the overview should start working properly.
Probably needs on the subform ITSignSub hidden initially
Maybe you are looking for
-
Why can I I is no longer the scrolling of the message?
I have a wireless mouse and allows to scroll all suddenly is no longer within the e-mail. I have to up and down instead of the arrow keys. I am able to scroll outside the e-mail. Is there any solution for this?
-
EliteBook 840 G2: Elitebook 840 G2 screen freezing Point
Videos are not, but its is issued, unless you keep the mouse pointer movement (then it will display the video. Web pages also freeze, you can't scroll down unless the mouse pointer is moved. All this tends to happen when running on the battery.
-
In the light of the announcement that the xp version support will be withdrawn w.e.f. April 8, 2014, I want to restore the B205 Toshiba laptop with the latest version to recover the notebook. Please suggest measures to be initiated at the end.
-
Speed phone (as seen in the game)
Hello, I play this game called Empire of Transport. Maybe some of you know (or are addicted too, but sometimes it is really slow and the animation of the things flying over screen makes it almost stop.) Some days, but it's going pretty fast and I won
-
Shrink/minimize/close keys went to older versions (windows XP ect)
Help, please! I play a game on my pc (Minecraft) and to register using Banicam. He started to say does not not, which he does a lot, but then it poped in saying you want to go faster ect. and you want to revert to old keys close/minimize/shrinking of