Step by step guide for custom legends

Similar Questions

• is there a step by step guide for Mozilla protection if my 5 year old daughter click on something that could be dangerous for her?

  I need to set up a login for my older daughter of 5 years on our computer, so she only has access to Mozilla, and once on Mozilla that she cannot access inappropriate Web sites. Is there a step by step guide for someone who has never done this before?

  My operating system is Windows 7

  Thank you very much for you help and guidance.

  Respectfully,.

  Derek Mr. Bond

  Hello Derek,
  I understand that you're concerned about your daughter and there is certainly a way to solve this problem.

  1) http://www.qustodio.com/
  This is a free parental control software that offers what you need

  (2) otherwise, you can also try this one: http://www1.k9webprotection.com/

  Best regards, G-Cloud.

• Step by step guide for management of the Persona

  Hi, I know, there are a few docs VMware 'official' on the management of Persona, but I was wondering if anyone has advice or links to the best way to set up the management of the Persona?

  Hello

  Check the following information http://www.vmware.com/files/pdf/view/VMware-View-Persona-Management-Deployment-Guide.pdf

  Hope this information helps you.

  __________________
  Im a nobody... Nobodys perfect... Therefore IM PERFECT!

• NB 100 and Windows 7, looking for drivers and step by step guide

  Hello everyone,

  IM thinking about to install Windows7 on my nb 100. But I have a question.

  1. How can I install the dvd version of windows 7 on my nb 100. This Microsoft tool is the right one?
  http://store.Microsoft.com/help/ISO-tool

  2. the Windows Recovery Cd will work, after I format the nb 100?

  3. where can I download the NB100 Windows 7 drivers?

  4. is there perhaps a step & step guide how to install windows 7 on nb 100?

  I would be grateful if you could help me

  Marco

  Hello

  (1) you can install Windows 7 using a Win 7 DVD or you can get an ISO file (image) and could create a bootable DVD or a USB bootable flash drive.
  The NB100 does not use an internal DVD drive. So if you do not want to install Win 7 from DVD then you have to buy an external USB CD/DVD drive. But you can also create a bootable USB key and might install Win 7 of this external USB.

  (2) Yes, it will work. The recovery disk to put the laptop in the same State as on the first day of purchase.

  (3) I think NB100 was created not for Win 7 because it is a netbook.
  Win 7 wouldn't go quite fast, of course, you could install it but the Win 7 needs a lot of material power and remedies like Vista and I guess NB100 is not supported these features powerful CPU or GPU.

  (4) I doubt that this teaching exists. I mean that the Win 7 drivers are not available for NB100. So, how to do an installation guide without no Win 7 drivers? But as mentioned above; You can install it by using the external drive. Win 7 drivers must be collected at your own hand.

• step by step guide to download from a DVD on USB

  step by step guide to download from a DVD on USB

  Hello

   
  You can try the following steps
   
  1. Insert your data DVD in a DVD player. Note: DVD must be a DVD-R or DVD - RW that was created for the storage of files. Cannot copy DVDs manufactured in series with videos or software on them.
  2. open the contents of the DVD by going to the 'Computer' utility and then double-clicking on the DVD. You should see all the data files
   
  3. connect your USB to the computer, and then open it in the same way that you opened your data DVD in the previous step.
   
  4. place the USB window and the disc data side by side. Then highlight the files that you want to copy by left-clicking with your mouse and then dragging the marquee on the icons of file you want.
   
  5 drag the icons highlighted in the window of data DVD to the USB drive window. A box appears stating that a file transfer is in progress. Once this window disappears, the file transfer is complete, and you can disconnect your USB and remove the DVD data disc tray.
   
  You can also try copying the data from the DVD, and then transfer to the USB key.

• Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Here.

  Re: Admins we can get an ad platform-specific sticky for banners of edge?

• How to change the step of the custom action?

  Hi, I use Photoshop CC 2015 and I want to change the property of a single step in a custom action. A lot of people through the internet said that if you double-click on a step, you can change the properties. But when I do this, he plays just this step (not all the action, just that step). What is the right way?

  Specifically, I would like to change the properties of this step:

  

  I like to "Select the front layer WITH Make Invisible"

  Now when you choose Select layer front/rear, it ignores the invisible layers. I would like to go to the next layer, even if the layer is invisible. If anyone know the shortcut keyboard for that... then I will not need to change the step!

  
  Thank you!

  Hello, when you double click you can have an option to change if you have something like a fit, with parameters.

  In your case, I think you can fix record this step. First, make a copy of your action, just in case something is wrong and then:

  -first uncheck the check box for all the step after that you want to save again.

  -remove the step you need to register again;

  -Run your action on a single file. It stops at the last stage before the one you need to register again;

  -Click on the Begin record button in the Actions Panel;

  -make your step again with the options you need.

  -Click the button to Stop recording.

  -Check the checkbox for all the steps and action should be ready again.

• Is there a step by step guide to transfer licenses?

  I have a PC that started getting the following message: "windows has detected a hard disk problem. " ‘ Backup your files immediately to prevent the loss of information and then communicate with the production of the computer to determine if you need to repair or replace the disk. " It is very I need a new hard drive and if it is sent to the manufacturer it will have to be re define probably provided the factory." I think I can lose some settings in the registry, etc.
  
  Since the purchase of the PC, I bought Adobe Design Premium, so if I end up with a new hard drive or even a new PC - how can I make sure that I can transfer the software without affecting the permit? Some discussions have conflicting info on disable or deactivate do not first - I would really appreciate a simple step by step guide - would be a good thing if Adobe could issue a permit too!

  Thank you very much in anticipation
  

  Help--> Deactivate in any of these applications now, then just instal software ogical on the new machine. If activation does not work, contact support to reset on the server side. Nothing is more necessary.

  Mylenium

• Link on the installation guide for content Portlet Suite 11 g Release

  Hi all
  
  Anyone knows the link to get the installation guide for dissemination of content Portlet Suite 11 g.

  Hello

  I also had this problem initially, but in my case I had missed on the following steps:

  1.

  From a command line, run the WebLogic Scripting Tool (WLST), for example:

  WLS-HOME/as11r1wc/common/bin/wlst.sh

  Note:
  The script of WebLogic (WLST) tool is a script command line that you can use to create, manage, and monitor WebLogic Server domains. See the Oracle Fusion Middleware Oracle WebLogic Scripting Tool for more information.
  2.

  After initializing the script of WebLogic tool, type connect() and press ENTER.
  3.

  You are prompted to enter the user name, password and server URL Admin. Enter the following values and press ENTER.
  4.

  Once connected to the server, run the following command to register your WSDL:

  registerWSRPProducer('webcenter','Provide_Any_Name_for_WSDL_Handle','Your_WSDL>',timeout=500)

  For example:

  registerWSRPProducer (' webcenter', ' StellentWSRP ',' http://Host_Name:Port / SPC/portlets/wsrp1? ") WSDL ", timeout = 500)

  Referencing your content server

  WLST following controls should be used to create, delete and reset an Oracle Content Server connection:

  Note:
  Custom managed server on which CPS is deployed and the WLS_Spaces server must be restarted after you run the following commands to make the changes take effect.

  *

  Run the following command from WLST to create an Oracle Content Server connection:

  createJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'Content_Server_Host' = serverHost, serverPort = 'Content_Server_Port')

  For example (if the CPS application name is StellentPortlets):

  createJCRContentServerConnection ('StellentPortlets', 'CSConnection','192.0.2.250 = ', serverPort = ' 4444' serverHost, socketType = 'socket')

  *

  Run the following command from WLST to remove Oracle Content Server connection:

  deleteConnection (appName = 'CPS_Application_Name', name = 'CSConnection')

  *

  Run the following command from WLST to restore an existing Oracle Content Server connection:

  setJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'New_Content_Server_Host' = serverHost, serverPort = 'New_Content_Server_Port')

  *

  Run the following command from WLST to list existing Oracle Content Server connections:

  listJCRContentServerConnections (appName = 'CPS_Application_Name')

  See if you've too missed to follow the above mentioned steps and if so then fill to see if the problem still persists.

  Hope this helps

  Thank you
  Srinath

• Error 2738 could not access VBScript Runtime for custom during the installation of a turbostick action.

  I am trying to install a turbo stick on my acer aspire - and getting a 2738 error could not access VBScript Runtime for custom action. I am running windows 7 and acer and Bell - my provider have not been able to help.

  Kevin

  Hey Kevin,

  Thank you for the update.

  1. Run as administrator command prompt:
     1. Menu start-> all programs-> Accessories
     2. Right-click on command prompt and select run as administrator
  2. Type the following command at the prompt: reg delete "HKCU\SOFTWARE \Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}" /f, then press on enter.
  3. Then, you must also type the following command: c:\windows\system32\regsvr32 vbscript.dll, and then press ENTER.

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• When installing or uninstalling the software get error 2378 - could not access VBScript Runtime for custom action

  I get error 2378 could not access VBScript Runtime for custom action, when I try to install the software and uninstalling some software.

  I tried several online for regsvr32 vbscript.dll fixes and nothing has helped.

  I tried to remove the keys from HKCU\Software\Wow6432Node and it is said that they do not exist.

  I have registered the VBScript engine in the folder it is installed, said successful but still does not work.

  I tried with run as administrator of the command-line also.

  It is a Dell laptop with Windows 7 Home Premium 64 - bit.

  Any suggestion would be appreciated.

  Thank you

  Oldestman

  Hello

  What operating system is installed on your computer?

  Method 1: This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation. I suggest to try the steps below and check if the problem is resolved. If you have already tried these steps then we do know.

  Delete the registry following key then save the VBScript code and check if that helps:

  Step 1:  If you have a 64-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}" / f

  If you have a 32-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  Step 2: Register VBScript by following the steps below:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. at the command prompt, type the following command and press ENTER:

  If you are using32 bit version of Windows, and then run the following command:

  regsvr32 vbscript.dll

  If you are using64 bit version of Windows, and then run the following commands:

  %windir%\syswow64 CD

  regsvr32 vbscript.dll

  d. after the command is executed successfully, try to install

  Method 2: Diagnose and correct program installation and uninstallation of the problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• can anyone guide for after the development of a plugin effects?

  Can anyone guide for after the development of a plugin effects?

  His strong to find directions to make a.

  Wrote scripts in script extended with the support of the community, adobe and online tutorials.

  
  

  But I know that Plugin development is not an easy task, but my curiosity is killing me if I don't try. Can someone please guide.
  

  I downloaded the SDK CC 2015. There are lots of examples, model Skelton, CEAP folder. All Visual studio solutions.

  When I try to open it, it says no loaded project that some components are missing, reinstall using microsoft visual studio c++ 2015.

  Can someone just to share a very small brief step by step from the beginning to the end.?

  .Aex format encoding?

  Thank you

  in the project settings, you can change the directory 'exit' to anywhere where

  you would like to.

  Ideally, you will set it to EI, or another folder plug-in directory

  in which you can create a shortcut to the plugin directory of the AE.

  in this way, you can build directly in a folder AE readings and debug your

  plugin.

  

• Guide for publishing iPad Apps V26

  I am keen to create an application of my folio.

  I downloaded the Guide for publishing iPad Apps (May 5, 2013 v26)

  On page 14, Miss me the next step (5), what kind of guy I have to select:

  

  And page 16, after step 14, what kind of security that I choose.

  

  Can someone help me with these steps?

  For the first, looks like you create a development certificate, in order to have the correct option selected. For the second, you have enabled a setting in the previous Panel that sets these options. Just use the defaults - 2048 and RSA.

• Installation guide for BPM SOA Suite and Oracle 11g

  Does anyone know of a good installation guide for a new installation of the following SOA and BPM of Oracle 11 g (Windows 64 bit)?
  
  I'm looking to the 'Setup Guide quick for Oracle SOA Suite and Oracle Business Process Management Suite 11 g Release 1"(http://download.oracle.com/docs/cd/E14571_01/install.1111/e14318.pdf), but it is a bit dated (April 2010) and I see that is missing a few steps.
  
  Thank you

  Take a look at the for Oracle SOA Suite 11 g 1 material (http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf) Quick Start Guide.

  The steps that do not appear in the document you mentioned are included in this document. It takes you through the necessary extra step for the installation of Oracle BPM. Although for 11.1.1.4, it works very well for implementing 11.1.15 in a DEV environment.

  Dan

• corrections to the Enterprise Deployment Guide for Oracle Identity Management

  Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management
  11g Release 1 (11.1.1)
  Part number E12035-06
  
  http://download.Oracle.com/docs/CD/E17904_01/core.1111/e12035/extend_oid.htm
  7.2.2 an additional Instance Oracle Internet Directory configuration
  Step 9 should be oid_inst2 instead of oid_inst1
  
  
  http://download.Oracle.com/docs/CD/E17904_01/core.1111/e12035/extend_ovd.htm
  8.2.2 configure an additional Oracle virtual directory
  Step 8, should be ovd_inst2 instead of oid_inst1
  
  Does this sound right? OTOH, if the manual is OK let me know why.

  You're right, the manual is wrong.