step by step guide to download from a DVD on USB

Similar Questions

• Boot from the DVD or USB on the Y580?

  Can someone tell me if it is possible to boot from the CD/DVD or USB on the Lenovo Y580?

  Thank you, Dave.

  in the y580 bios supports usb 3.0.

  you have the USB is connected before starting, right?

• I can't install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns the message to the final installation steps "invalid serial number." I had copied and pasted directly from 'My Adobe'.  What should do?

  I can't install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns the message to the final installation steps "invalid serial number." I had copied and pasted directly from 'My Adobe'.  What should do?

  Hi hgratz,

  In view of the error "invalid serial number" for Acrobat 9, I suggest you to please visit the doc KB link mentioned below:

  Error "invalid serial number". Acrobat 9 | CS4

  Let me know if this helps.

  Kind regards

  Ana Maria

• NB 100 and Windows 7, looking for drivers and step by step guide

  Hello everyone,

  IM thinking about to install Windows7 on my nb 100. But I have a question.

  1. How can I install the dvd version of windows 7 on my nb 100. This Microsoft tool is the right one?
  http://store.Microsoft.com/help/ISO-tool

  2. the Windows Recovery Cd will work, after I format the nb 100?

  3. where can I download the NB100 Windows 7 drivers?

  4. is there perhaps a step & step guide how to install windows 7 on nb 100?

  I would be grateful if you could help me

  Marco

  Hello

  (1) you can install Windows 7 using a Win 7 DVD or you can get an ISO file (image) and could create a bootable DVD or a USB bootable flash drive.
  The NB100 does not use an internal DVD drive. So if you do not want to install Win 7 from DVD then you have to buy an external USB CD/DVD drive. But you can also create a bootable USB key and might install Win 7 of this external USB.

  (2) Yes, it will work. The recovery disk to put the laptop in the same State as on the first day of purchase.

  (3) I think NB100 was created not for Win 7 because it is a netbook.
  Win 7 wouldn't go quite fast, of course, you could install it but the Win 7 needs a lot of material power and remedies like Vista and I guess NB100 is not supported these features powerful CPU or GPU.

  (4) I doubt that this teaching exists. I mean that the Win 7 drivers are not available for NB100. So, how to do an installation guide without no Win 7 drivers? But as mentioned above; You can install it by using the external drive. Win 7 drivers must be collected at your own hand.

• is there a step by step guide for Mozilla protection if my 5 year old daughter click on something that could be dangerous for her?

  I need to set up a login for my older daughter of 5 years on our computer, so she only has access to Mozilla, and once on Mozilla that she cannot access inappropriate Web sites. Is there a step by step guide for someone who has never done this before?

  My operating system is Windows 7

  Thank you very much for you help and guidance.

  Respectfully,.

  Derek Mr. Bond

  Hello Derek,
  I understand that you're concerned about your daughter and there is certainly a way to solve this problem.

  1) http://www.qustodio.com/
  This is a free parental control software that offers what you need

  (2) otherwise, you can also try this one: http://www1.k9webprotection.com/

  Best regards, G-Cloud.

• Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Here.

  Re: Admins we can get an ad platform-specific sticky for banners of edge?

• Is there a step by step guide to transfer licenses?

  I have a PC that started getting the following message: "windows has detected a hard disk problem. " ‘ Backup your files immediately to prevent the loss of information and then communicate with the production of the computer to determine if you need to repair or replace the disk. " It is very I need a new hard drive and if it is sent to the manufacturer it will have to be re define probably provided the factory." I think I can lose some settings in the registry, etc.
  
  Since the purchase of the PC, I bought Adobe Design Premium, so if I end up with a new hard drive or even a new PC - how can I make sure that I can transfer the software without affecting the permit? Some discussions have conflicting info on disable or deactivate do not first - I would really appreciate a simple step by step guide - would be a good thing if Adobe could issue a permit too!

  Thank you very much in anticipation
  

  Help--> Deactivate in any of these applications now, then just instal software ogical on the new machine. If activation does not work, contact support to reset on the server side. Nothing is more necessary.

  Mylenium

• Hello! How can I resume my apps purchased after a break... or do I need to download from the beginning... If so, how?

  Hello! My purchased apps (logic pro x) will not resume downloading after a break. Do I need to download it from the beginning?  If so, how?  I tried to resume the download, but the resume icon does not... I also tried to download from the start by removing apps half downloaded from my pc...  I m running os 10.10.5 yosemite. Any suggestions will be much appreciated.

  Hello there, im khans.

  Looks like you are unable to download the application Logic Pro X on your Mac under Mac OS X Yosemite. The following article contains some great instructions on how to reinstall Logic Pro X:

  Logic Pro X: Troubleshooting basics

  11 reinstall Logic Pro X

  Another approach you might consider is reinstalling Logic Pro X. To do this, you must remove the application and then reinstall it. You don't have to remove everything that was installed with Logic Pro X.

  To reinstall Logic Pro X, follow these steps:

  1. In the Finder, choose Applications from the menu reach.
  2. Locate the application Logic Pro X and drag it to the trash.
  3. Open the Mac App Store
  4. Click the Purchases button in the toolbar of the Mac App Store.
  5. Connect to the Mac App Store using the Apple ID you first used to buy Logic Pro X.
  6. Look for Logic Pro X in the list of applications purchased from the App Store. If you do not see Logic Pro X in the list, make sure that it is not hidden. See Mac App Store: hiding and showing buys for more information.
  7. Click on install to download and install X Pro Logic.

  To learn more

  For more information on settings or installation, please refer to the X Logic Pro User Guide.

  For any question, install the additional content, see Logic Pro X, MainStage 3: additional content installation issues.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Cannot download from any site

  For some reason, Mozilla or don't let me download from any site, including your own. This was not always a problem. He just started a while back. Maybe after an update? I'm not sure.
  Hope you can help solve this problem.
  Thank you
  Nancy

  Then you may check the list of extensions and disable or remove those that are not essential or unrecognized. Open the page modules using either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then, in case of doubt, disable or remove.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  I hope that will completely get rid of it.

  If it comes back, you may have to uninstall something in the control panel.

• Old videos downloaded from the phone will not play sounds

  original title: video phone

  video files recently downloaded from the my phone will play with his still earlier, who do not play with the sound, now are not... Troubleshooting said there is no problems, map its reports etc works well... someone has any ideas please?

  Hello

  1 did you change on your computer prior to this issues?
  2. What is the exact error message and the error code?
  3. what version of the Windows operating system is installed on your computer?
  4. what type of file format you are trying to play?
  5 are you facing this problem with specific videos?
  6. what application you're using to play the video?

  Try the following and see if it helps.

  
  Method 1:
  
  Step 1:

  If you use Windows media player to play videos, then I recommend you to install the appropriate Codecs and check if that helps.

  
  Codecs: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Codecs-frequently-asked-questions

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk

  Step 2:

  If you use any non-Microsoft player to play videos, then I suggest that get you in touch with the program to build support.

  Method 2:

  Set the audio output device by default using steps below and check if it helps.

  a. click the Start button and then click Control Panel. In the search box, type sound, and then click sound.
  b. click playback devices.
  c. Select the device by default and set as default to make sound come from specific device.
  For more information, see the following Microsoft article.
  http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds

  Method 3:

  No sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  See also:

  Tips for solving common audio problems: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• No sound on the downloaded files my laptop as well as other videos downloaded from a key.

  Original title: lack of sound

  I downloaded videos from my laptop over a few others downloaded from a stick.  There is unfortunately no sound even if the noise is heard clearly on the mobile.  Can anyone explain why and what I can do to fix the problem.  I tried the obvious things like using the up and down keys sound and also by using the Control Panel, all to nothing done.  The sound works fine on for instance replay.

  Hello

  · What is the format of the music file you are trying to play?

  · You use Windows media player to play music file?

  · If so, what is the version of the same thing?

  Follow the steps listed in the link: the quality of Audio playback problems: http://support.microsoft.com/gp/audio_playback_problems_windows

  I suggest you install the codec related and check if it helps. You can check the link below for more information on the Codec: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Codecs-frequently-asked-questions

• Why can not download from Microsoft Download Center?

  I have tried 3 days to download .NET Framework 4 (standalone) from the microsoft Download Center, but I can't.

  Also tried downloading something similar and still the same problem.
  What is the problem with that?
  Why all the downloads from Microsoft Download Center does not work?

  Hello

  ·         What web browser do you use to download .net framework 4?

  ·         You get the error message?

  Follow these methods and check if that helps:

  Method 1:

  Step 1:

  I suggest to start the computer in Safe Mode with network and check if you can download .net Framework 4.0.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  You may also start your machine in a clean boot State to rule out the involvement of a third party software conflict.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

   

  Method 2:

   

  If you use Internet explorer, you can try optimize Internet explore for better performance and check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Method 3:

  Also, follow the steps in troubleshooting this article and check if that helps.

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/KB976982

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• Cannot download for Media Center tv guide - says download but no results?

  Media Center seeems to work properly on the new Windows 7. No problem with the display of television channels or other records, but I can't seem to get a guide to download. The program says the guide is obsolete and you propose to download the ads but never seems to finish and no descriptions or check names are displayed. How can I fix this?

  Hi mcfat,.

  Welcome to the Microsoft Answers site!

  (1) you get an error during the download?

  For now I suggest you to download the latest announcements of guide manually and see if it gives any error or that the download is finished successfully.

  Follow the steps below to download the lists guide manually.

  You can configure Windows Media Center Guide lists auto update, but you can also download the latest Guide information manually.

  Method 1:

  1. on the start screen, go to tasks, click settings, click TV, click Guide, and then get latest Guide listings.

  2. When prompted, select Yes to begin to download the Guide listings. You are notified when the update of the Guide is complete. You can continue to use Windows Media Center and the Guide while new Guide information is being downloaded.

  Access the link below for more information on the above steps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/download-updated-Guide-listings-in-Windows-Media-Center

  If you have any question by downloading manually too, then try Method 2 and see if that can deal with the issue.

  Method 2:

  (1) close Media Center
  2) click on the start menu, choose run and type cmd
  (3) run the command regsvr32.exe atl.dll
  (4) run the command C:\WINDOWS\eHome\ehSched /unregServer
  (5) run the command/service C:\WINDOWS\eHome\ehSched
  (6) runs the C:\WINDOWS\eHome\ehRecvr /unregServer command
  (7) run the command/service C:\WINDOWS\eHome\ehRecvr
  (8) runs the C:\WINDOWS\eHome\ehRec.exe /unregServer command
  (9) executes the command C:\WINDOWS\eHome\ehRec.exe/regserver
  (10) runs the C:\WINDOWS\eHome\ehmsas.exe /unregServer command
  (11) runs the command C:\WINDOWS\eHome\ehmsas.exe/regserver
  (12) restart the computer
  (13) restart Media Center

  If the problem persists, look for any similar error you get during the download in the link below and let us know what it is to continue troubleshooting.

  http://blogs.msdn.com/astebner/articles/490466.aspx

  Come back and we will say what can be done better.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to download from Microsoft I get a virus detected error erased file

  Original title: carnt download anything

  When I try to download from Microsoft I get a virus detected error erased file

  When I try to download from Microsoft I get a virus detected error erased file

  Probably because your computer is infected with a rootkit. See if these steps in removing viruses, marked as the answer, apply to you:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/i-get-error-message-xxxxxxxx-contains-a-virus-and/fbb5e0fd-63bd-4E01-9a98-6074d33a8fd6