Steps to install Windows 7.

Similar Questions

• How can I install Windows Xp with Windows Vista?

  INSTALLATION OF WINDOWS XP WITH WINDOWS VISTA?

  I HAVE WINDOW VISTA HOME PREMIUM 32-BIT IN MY SYSTEM, BUT SOME OF MY SOFTWARE IMPORTANT DO NOT INSTALL VISTA SO I TRY TO INSTALL WINDOWS XP WITH VISTA BUT IT DOES NOT WORK.
  AFTER AWHILE, I SEE THE TYPE OF HARD DRIVE IN MY SYSTEM IT IS AHCI IN THE CASE OF VISTA, WHEN I CHANGE TO THE SECOND IDE TYPE THEN XP IS INSTALLED AND WORKING BUT VISTA IS DEAD AND WHEN I CHANGE TO NEW TYPE OF DISC TO AHCI THEN VISTA THROUGH REPAIR AND BECOME WORK VERY WELL , BUT DESTROYED XP.
  BOTH THE WINDOW WORKS ON DIFFERENT DISC TYPE AND WHENEVER THE DISC TYPE CHANGE, IT WILL TAKE VERY LONG TIME TO FIX THE WINDOW.
  IT BECOMES IRRITATING.
  WHY I CAN'T USE THE WINDOW AT THE SAME TIME?
  SO PLEASE GIVE ME THE GUIDE-LINE STEP BY STEP HOW INSTALL WINDOW XP WITH VISTA?

  Hi AbidAman,

  I suggest to check the following items and check.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

   

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

   

  Install multiple operating systems (multiboot)

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-more-than-one-operating-system-multiboot

   

  Set up a dual-boot system

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-dual-boot-system-from-Windows-Vista-inside-out

  Hope this information helps.

• Error 0x8007054f while installing Windows 7 SP1

  When you install Windows 7 SP1, the installation fails with the error 0x8007054f. Can someone tell me how to solve this problem?

  Mary,

  This problem is sometimes associated with damaged files or registry keys, to solve the problem, you need to search for files that are damaged, perform a upgrade on the spot and then reinstall Windows 7 SP1. Here are the steps:

  Step 1: Run Chkdsk.exe

  Click Start , and then click computer

  Right-click on the system (usually C:\) drive, and then click Properties

  Click on the Tools tab, then click on check now under error checking

  Use the default settings, and then click Start

  Click on schedule the disk check

  Restart the computer and the drive will be checked to find errors

  Or

  Run Chkdsk in command prompt with administrative rights.

  CHKDSK x: /F /R  (this command will perform a complete analysis (including bad sectors) and an attempt to remedy)

  Step 2: Perform a upgrade on the spot:

  Click on the following link for more information about how to perform an in place upgrade

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Step 3: Install Windows 7 SP1

  Start Windows Update and install Service Pack 1

  You can also consult the following content is necessary:

  Starting steps to take before installing Windows 7 Service Pack 1 from the Microsoft Download Center

  Problems to install a service pack for Windows 7

• How to install Windows XP in Satellite A210-14 - need info step by step

  I'm not an expert on the Installation of the OS. I've heard many people how complicated to install WXP Vista laptop. Is it a document, how to do step by step? What should I do first? My labtop will work 100% once I installed Windows XP Home edition? What I have is a CD of WXP SP2 installation.

  Can someone explain to me exactly? Thank you!!

  It seems that the drivers of Windows XP Home edition are not available yet. Check the Toshiba download page in the next few days and if you still need help, please post again.

• Cannot install windows update, error: configuration of updates. Step 3 of 3. 0% complete. Do not turn off your computer

  Original title: My laptop has frozen all by installing a Windows Vista Automatic Update

  My Samsung R70 was installing an update when it stuck on a screen saying, "Configuring Updates. Step 3 of 3. 0% complete. Do not turn off your computer. "After several hours, I turn off my laptop and since then I tried to open safe mode. I removed the battery and let the power drain before restarting and I also tried to startup, Samsung II of the recovery and restoration of the system repair. Nothing works! When I start I get the same "Configuring Updates" screen and I can't get in front of her.

  Someone at - it ideas? Thanks a lot in anticipation!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  Hope this information is useful.

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Steps to install the latest version of Peoplesoft on Windows

  Hello

  Can someone guide me with high level steps to install the latest version of Windows for peoplesoft.

  Thank you

  Patricia

  Hi Patricia,

  Yes, the steps are the same.

  Please only check if windows server 2012 is certified or not.

  I checked the same in support.oracle.com and it is certified.

  PeopleSoft PeopleTools 8.54 is certified Microsoft Windows x 64 2012 (64-bit)

  Thank you

  Yogesh P.

• The time machine shaped my result of ssd unable to check my key when installing windows?

  Brief summary:

  My machine: Macbook pro mid 2012
  What I have: Samsung Evo SSD, optical Bay caddy, 8.1 windows bootable dvd with serial
  I wanted to do: install windows in my second internal SSD (optical Bay)
  What went wrong: Enter key I get: "we could not verify the product key. Please check your installation media. »

  I suspect that the problem is: I have formatted by mistake the SSD mac front.

  Question: Has been put in shape my SSD the cause of the problem? and if yes how can I do to reset?

  Detailed long version

  I have a macbook mid 2012 retina not pro that I wanted to have the option to be able to boot from a windows and a mac. As a result, I bought a samsung EVO solid state drive for this purpose. I decided to try the drive and put it in instead of the optical drive caddy the day I got it. I was invited with the message that the mac was unable to acknowledge it and follow a few steps online to format. I would find it later when we look at a forum that I should have left the unformatted SSD. However, I tried to install windows on the EVO by placing the optical drive in the computer, put the EVO in the main Bay. I put the windows cd in and followed the installation. Everything was good until I had to put in the windows key. I put in and received the message "we could not verify the product key. Please check your installation media. "I double checked to see if it was right by voluntarily entering a wrong key he gave me a message that the key was invalid. Snooping around, I tried to reset the drive by using the offer of advanced tools and I was told that windows did not have access to the partition or something of the sort.

  A format the drive of the source of the error and if so is it possible to return to the factory settings?

  All the advice/help is greatly appreciated! Thank you very much!

  The formatting SSD is not related to the issue with the product key. Windows Setup reformats the SSD in the main Bay NTFS still. If the SSD is less than 2 TB, you can format the MBR with attempts as well as FAT32 format.

  Your model is compatible with the installation from DVD and USB, both. You can also download the ISO of Microsoft W8.1 to the https://www.microsoft.com/en-us/software-download/windows8ISO to ensure that your DVD is not a several bits (32-bit and 64-bit DVD).

• No sound after installing windows 10 MBP 2012

  Hello world

  Here's what I did.

  I have MBP 2012 with El Capitan on it.

  I installed windows on this 10. Here are the steps I followed.

  1. Plist file modified to allow the creation of iso windows 10 on USB for my MBP (PreUSBBoot USBBoot and 2 other usual changes)
  2. ISO file 10 Windows installed
  3. Make a key USB bootable but Bootcamp with drivers
  4. Use disk utility to partition the drive for windows (reason - because it gives error while installing windows, windows MBR EFI only on device TPG error)
  5. Restarted my MBP used and selected EFI boot option key (as when installing windows in Bootcamp, it gave an error saying no device found startup)
  6. Installed Windows and driver loaded by installing bootcamp
  7. Everything works fine but the sound

  Tried, but failed

  1. Clean install of windows if partition bootcamp (error - no found boot device)
  2. Boot EFI (error - error EFI GPT MBR, windows can be installed only on TPG error)
  3. Tried the update of drivers for the sound. However, did not

  Please help me with the steps to solve this problem. In addition, windows is not activated is there any way through which I can still get windows 10 free.

  Change the Info.plist file is incorrect. Your MBP 2012 takes in charge the two, USB and DVD facilities. Please use BCA and remove the current installation. Installation of Windows using boot EFI on a preUEFI machine will cause more problems.

• I installed windows 7 from XP and reinstall Firefox. However, I have lost the list of favorites. Is there a way I can recover the previous the "Favorites".

  Installed Windows 7 Professional custom in the required form XP. All the favorites were lost in Firefox and had to reinstall Firefox.
  Explorers has maintained the Favorite list, I had to explore - quite different from Firefox.
  Check the programs created separately by 7 to include the XP file. Favorites, registration is not relevant to the list lost on Firefox reinstall.
  Question: Is it possible that I can get back the original Favorites listing lost when the 7 install, or is it 'gone with the wind "?

  I have not read what is happening in an installation of XP to 7. You can find this file on your system:

  C:\Windows.old
  

  If so, you can find one of these:

  • C:\Windows.old\Documents and Settings\your user name
  • C:\Windows.old\Users\your username

  If so, your old given Firefox might be in there. To explore more, it would be useful to set windows to display the hidden files and folders. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hidden-files

  Then search either:

  • \Application Data\Mozilla\Firefox\Profilesyour usernameC:\Windows.old\Documents and Settings\
  • Your username\AppData\Roaming\Mozilla\Firefox\Profiles C:\Windows.old\Users\

  Here you can find one or several folders named random semi. Who has most recently updated content is probably the one you want to restore from.

  Bookmarks only

  Go down the old bookmarkbackups folder and copy the last two backups in a location such as the desktop.

  The restore feature will replace the bookmarks in Firefox by default (and what you added since the reset) with all like bookmarks. If you want preserve newly added bookmarks, use the first, export function before the restore, then the import function later. The following articles have details:

  • (Optional) Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
  • Restore bookmarks from a backup or move them to another computer - to access backups on the desktop, use the command 'Choose file' menu
  • (Optional) Import bookmarks to an HTML file

  Success?

  Complete restoration

  This post has my suggested procedure to resurrect your old wide profile in your new installation of Firefox. Please note the use of the copy instead of move throughout the process. This allows you to try again if it fails somewhere along the way.

  https://support.Mozilla.org/questions/1024189#answer-638319

  A little luck?

• Cannot install Windows 8 on retina Macbook Pro 2011

  I try to install and run Windows 8 on my Macbook Pro 15 "retina end 2011 with OS 10.10.5."

  I read a ton of forums, and they say all get a Windows 8 ISO from Microsoft Web site. I did it.

  Then, they say get a Virgin USB key and plug it in. I did, and I put the ISO on my USB external drive.

  Then he said: open Boot Camp Assistant, what I do, but then it does not match what say all forums. When I open the Boot Camp Assistant, he goes to the Introduction page. I click CONTINUE and the next page says SELECT TASKS. The only two available tasks are to "Download the latest software from Apple support" or "install Windows 7 or later.

  I select both, it asks me to select my destination drive, what I do, then click "CONTINUE".

  It downloads the Windows support software.

  Then I get an error message that says "Installer disc cannot is, wait a few minutes for something (I forget exactly).»

  So I wait and nothing happens and I'm back on the screen SELECT TASK.

  ANY HELP MUCH APPRECIATED.

  Greetings Peter Degaillande1,

  A MacBook Pro and MacBook Pro with Retina display requires different versions of Windows due to their different abilities. Here is the information you need to determine what Windows operating system can be installed on your.

  Use Windows on your Mac with Boot Camp 8.1 - this article explains what MacBook Pro models can install Windows 8.1 and the steps on how to do this.

  Install Windows 7 and older versions on your Mac with Boot Camp - this article explains what MacBook Pro models can install Windows 7 and previous versions, as well as the installation steps.

  I hope this helps!

• Error message when you try to install Windows on OSX 10.10.5 10

  I have a Mid-2014 retina Macbook Pro and I am trying to use the Bootcamp Assistant to install Windows 10 on OS X 10.10.5 and Bootcamp version is 5.1.4. I can't upgrade to El Capitan from now due to work related software, long story!

  I took the steps so far:

  (1) reset the PRAM.

  (2) reset SMC.

  (3) ensure that only a single partition is present using disk utility.

  (4) check the permissions of the drive and repair at least twice.

  (5) check the disc.

  (6) use Bootcamp assistant create the Windows Installer by using 64-bit Windows 10 iso file downloaded from Ms. All boxes have been checked.

  (7) in a suitable place when Windows Setup asks me what partition choose, I select created Bootcamp partition and click on Format. Product key has been entered each time.

  (8) installation continues until the point where it says "Ending up", then a pop-up window comes up saying "Windows cannot update the configuration to start the computer, Setup cannot continue."

  (9) I click OK and the window behind what is said "installation has been cancelled, any changes made to your computer will not be saved."

  (10) the computer is stuck on this screen for awhile. When, finally, he tries to restart, I just get a white screen. and eventually everything goes off.

  (11) when I turn on again, if I hold down the Option, I can see the OS X partition, partition Windows, recovery disc, then Windows on my USB (in yellow) and the "EFI Boot' in yellow.

  (12) I tried to click on Boot EFI, and goes through the same installation process and gives me the same error.

  (13) I tried to click on the Windows USB button, it starts to install (with the normal resolution unlike every other time) and this time gives me the error message "Windows cannot be installed on partition disk 0" (View details) "when I click it, it says"Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  I'm pulling my hair out on this one (and I don't have much to lose) Please HELP!

  Your Mac of 2014 is able to support two different types of Windows, most modern BIOS or EFI old installation.

  The Windows icon on USB is the method inherited from the BIOS while the start EFI icon is the most recent and modern method. Each has its own requirements for partitioning.

  2014 BC on 5.1.4 Assistant should have three check boxes. The first two should be checked only once to build the installer, while the last one can be used as needed.

  1. use the last checkbox to delete the current partition of BC.

  2. use only a USB flash drive (USB2 is preferable), other USB devices or SD cards cause problems.

  3. run SMC/NVRAM reset external storage after everything is disconnected.

  4. the USB should be directly connected on the Mac. Do not use a USB hub.

  5. your ISO source must be an ISO only 64-bit and about 4 + GB. ISOs larger and mixed-mode are not valid for MCR, although they can run on an ordinary PC.

  6 re - run BCA and check the last box - only install or delete... and try again.

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .