Still not get printer online

Similar Questions

• I've tried everything recommended to remove the Client Services for NetWare and still not get quick change of the user's screen. Becomes very angry. Rob

  Still not get quick change or log in screen which has all of the names to open a session

  Hello

  So in this case I recommend you to uninstall the complete NetWare using a 3rd party UN-install commercially available

  For example http://www.revouninstaller.com/index.html

  There are also many other software that I don't remember not and are available free on the internet for UN-install/remove left on entries of an application.

  Saurabh yapi | E-mail address is removed from the privacy *.

• I have a great had real Flight Simulator and can not get any online because they say that there is a firewall to the top, their stop Ishut still say is the same HELP.

  can not do a multiplayer game

  Hello

  -What operating system do you use?

  -What firewall you disabled?

  Step 01

  I suggest you to disable all security software installed.

  Disable the anti-virus http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software WARNING: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. Step 02:

  I suggest you to check with the ports of the link below and check for the windows firewall.

  Information about the ports that you must open in Windows Firewall to play or to host a multiplayer Flight Simulator X

  http://support.Microsoft.com/kb/925896

• I tried everything and still not get my firefox to respond

  I can get my browser to open, but then he said: it does not. I tried to start in safe mode, to reset, and even reinstalled Firefox and it still does not work. I have also conducted an audit of malware and restore my computer. I went through the troubleshooting and am unable to solve the problem. I can get online via the Explorer, but I love and miss my Firefox. What can I do else?
  I just tried to add troubleshooting information and it says that it cannot find the program to open it. Ugh, I'm really getting fed up! I'm not a computer expert, I'm the equivalent of about a student of 5th when it comes to computer skills. Help, please! Thanks in advance for any help.

  I finally thought to it! I was about to take my laptop behind the barn when my daughter called. I told him that I had worked on my cell phone and she says: oh did you check your java? She said that when its Firefox is upward, its usually to java. I went and downloaded java, restarted my laptop and back!
  Thanks to ideato for your help!
  And I hope this will help others with the same problem in the future!

• Can not get printer hp psc 750 to work with a new Dell dimension 8300

  Original title: the printer does not work

  I have a new Dell dimension 8300.  My printer is a former hp psc 750 printer scanner copier I can't print.  Can anyone help?

  Hello

  You should ask in the Forums of Windows answers corresponding to your version of Windows.

  Windows answers forums
  http://answers.Microsoft.com/en-us/Windows

  --------------------

  Check with HP Support, their drivers and documentation online and ask the HP
  forums for known problems.

  HP PSC 750 printer
  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=57769

  Drivers HP PSC 750
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=57769&

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------

  It might be a problem with the computer as an OEM Dell provides support
  for Windows.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• Still not get 2016 Outlook and Contacts calendar to synchronize with iCloud. iCloud data file has not been in Outlook but iCloud add-in is enabled.

  I use Windows 10 (v1511), 2016 Outlook Office 365 and iCloud 5.2. Mail is downloaded directly to Google mail Outlook. Calendar and Contacts live in iCloud and work properly in my iPhone, iPad and the app iCloud on the PC. Its just perspective that is not sync with iCloud to get these items.

  In outlook, the Setup program is not set up a data iCloud file ' * APLZOD.pst ' in the account tab data file settings. When you try to install a new data file in Outlook in account settings, the iCloud type available, but when you select what the error message says that this cannot be set in the iCloud Control Panel

  I tried several complete removal and then re - installs to iCloud for windows and have also done with the firewall and antivirus disabled active.

  I also deleted the Outlook data file * *.ost and allowed the installation program rebuild this application fee.

  The iCloud "add to" Outlook "add-ins" is active.

  The calendar, Contacts and tasks of the iCloud Panel section is checked when re-built, but after Outlook is running this section has not been verified and when you try to check it out and apply the change he UN-checks itself.

  Sorry for the long post, but I tried to solve this problem for some time.

  Thank you

  Chris

  The same problem.  I use iCloud for Windows 5.2 and Windows 10, 2016 office.   Everything worked well for several months until a few months ago, when sync calendar has stopped working.   I've updated iCloud of 5.1 to 5.2 but that just killed altogether.  Tried uninstalling icloud and relocation costs.  No luck.  When the iCloud settings appears, I check the box for the calendar and Contacts.  The driver then disappears.   I check again and it sticks.  But no messages on 'configure '.   When I close and reopen, the box is unchecked.   A few days ago I had the same problems the other another thread where he would show "set up" spinning forever (well, 30 minutes before giving up).   Not sure if it's an Apple problem or a problem of office.  But this is of course a problem.

• Still not get the filtering and the SUMIF with visible cells

  Hi all

  I know it is a pain for you people, but I'm really stuck with this problem.

  I tried to use the answers I found in the community and the User Guide, but I have to be closed to this kind of explanation.

  Once again:

  In the column A is a series of dates

  In column B the value corresponding

  In the foot of B line, I want the SumOf only the visible cells that I filtered before.

  So far I have always the sum of all the lines, filtered or not.

  I added another column with a True/False value and tried to use it but get the same result.

  I'm pretty slow, so I guess that I'll need your help once more.

  It is the sum before filtering:

  

  And that's the sum after filtering:

  

  I thank you for your time and patience.

  Lopez

  Lopez Hello,

  Table filtering only affects the rows that are displayed. Hidden lines are always included in the calculations of formulas referring to them.

  Your formula, = SUM (B2:B16) summarizes the content of all the B2 to B16 cells, including those that are hidden.

  There are several other functions in the family of the SUM. SUM, SUMIF and SUMIF. ENS are of interest here.

  SUMIF (English: SUMIF) accepts a condition and only adds the cells on the lines which is assembled as a condition.

  SUMIF. ENS (English: SUMIFS) accepts several conditions and only adds the cells on the rows that meet all the conditions.

  For the example stated in your post, must be the form you need:

  = SUMIF. ENS(B; A; "> = 02/01/2016." A; "" < 03/01/2016 ")"

  (NOT tested. The dates should be placed in two cells and these cells referenced in the formula. post a reply with any error message if the formula does not work as written).

  The lines not included in the amount need not be hidden.

  If the formula is inserted into column B, it must be in a line defined as a footer line using the menu item in the same position as the highlight in this screenshot:

  

  Footer lines can be placed on foot (bottom) of a table.

  Kind regards

  Barry

• still not get Windows 7 for Mac on the home network

  The question asked by several users, without satisfactory answer.  This seems to be a problem without a solution.

  I can't get my laptop Windows 7 see my Mac desktop on my home network wireless.  The laptop connects to the network very well and can access the Internet without problem.  But I can't connect the Windows PC to Mac to share files.  The Mac can see the PC and connect to it from the Mac side, so if I'm at the Mac I can drag files to the PC.  If I'm on the laptop, it is an island in the ocean.  Nothing can be seen anywhere on the network.  It is impossible to copy files to the Mac from the PC.

  There must be a Windows 7 problem.  I have another laptop running XP and it automatically connects to the Mac.

  Is this a bug of Windows 7 and this is why no one can explain how to solve this problem?  Mac forums are loaded with people having the same problem with their Windows 7 computers.

  Problem solved!

  PilotBob's suggestion did the trick for me. I was tearing my hair on all last night about why my Windows 7 (Ultimate) machine can access the files on my old MacBook Air for a year and not my two new OSX machines. When you try to access the new machines I kept getting an alert box saying connection failure and asks me to enter my username and password. Although they have identical accounts on all of my machines, I couldn't login to the new machines, OSX, even after you type the correct user name and password.

  The problem, it turns out, was that the Macbook Air has been configured to use the same working group as the Windows 7 machine (which I had imaginative name "WORKGROUP") and the new OSX machines did not use any group of work at all. Once I did that change, Windows 7 automatically connected the new OSX machines.

  My only point remaining dissatisfaction is that Windows 7 does not automatically captures the OSX machines on the subnet and the list under 'Network', as it does with my other Windows 7 machines. I have to enter the address of the OSX machine I want to access in the address bar of the file manager: i.e. "\\ComputerName" to see shared files on OSX machines. But once this is done, the OSX computers under network in file manager and remain there, and I can click on it to access all that is shared. I can live with that, even if, as John + 6154 pointed out, it seems that Microsoft could facilitate this. OSX automatically resumes all Windows machines on the subnet. So why can't Windows do the same? (My guess is that Microsoft will not be able to get away with this kind of arrogance much longer. "If things continue as they are it might soon be Microsoft touting that Windows plays nice with OSX, rather than OSX touting that it plays well with Windows.)

  In any case... taking into account the situation as it is, and adaptation of all the advice above with special credit to Malkeleah, here is what I believe is a complete list of what you need to do to allow access of file under OS Windows 7 x:

  On Windows 7:

  1. Configure a user account with a password
  2. Go to control panel > all items in the control panel > network and sharing Center, click on "change the advanced sharing settings" and make the following settings for any kind of network, you're on (probably home or work)
  3. Discovery of plug in the network
  4. Open the files and printers sharing
  5. Turn on the sharing section Public folder sharing
  6. Plug the password protected sharing
  7. Do not use "Homegroup" (he has a knack for spoiling your manual network settings)
  8. Make sure that your firewall allows traffic on your subnet to cross
  9. Identify the task force of your Windows machine by going to control panel > system and security > system. The name and the workgroup for your computer are displayed. You can change these if you have administrative privileges; Click on "Change settings" just to the right of the name of the computer. You will need the Working Group to set up your OSX machine.
  10. It seems you have to use Windows 7 Professional or ultimate edition to make the work of file sharing. I have not tried with Home Premium.

  On OSX:

  1. Go to the Apple Menu > System Preferences
  2. Select users and groups
  3. Set up a user with the same username and password as on the Windows machine (there is a padlock at the bottom left that you may need to click to allow you to make changes - this appears for almost all settings in system preferences)
  4. You can, if you wish, set up an automatic connection as Malkeleah for Windows. Just click on "Connection Options" at the bottom of the list of users
  5. Go back to system preferences, and then select the network
  6. Click on the Advanced button
  7. Click TCP/IP and make sure that you are on the same IP subnet as the Windows machine: that is 192.168.XXX. YYY, where XXX represents the subnet identifier and YYY represents the identifier of the machine. (I believe you can access the machines on different subnets, but you need to search the full IP address rather than just the name of the computer.)
  8. Click on WINS and set the NetBios name of the computer you want and the Working Group for the same workgroup that the Windows machine.
  9. Say OK for everything, then return back in system preferences and select sharing
  10. Check the things you want to share (at least the file sharing)
  11. Highlight file sharing, click the button under file sharing options (right) and select share files and folders using SMB (Windows) and select the users for whom sharing must be enabled. (It does no harm to also click AFP (Apple File Protocol) to share with the other OSX machines.)
  12. Click done, and then add the folders that you want to share using the sign [+] and [-] buttons at the bottom of the window and users. You can specify the privileges of each user the name of the user.
  13. Return to the WINS settings and make sure that OSX has defined the name of working group. For some reason any this does not happen instantly. If it is empty, then it has not been set. I had to try and try again repeatedly before 'take '. But once there, he should stay there. You may have to restart, however.

  Finally, to access your OS x from Windows machine

  1. Open a Windows Explorer window
  2. In the address bar, type \\OSXComputerName, that is to say "\\Air" or something else
  3. If all goes well, your shared folders should appear immediately, no need to enter a password, the password of Windows 7 is the same.

  I hope this helps someone.

  LF

• I already canceled my account adobe photoshop but still not get charged .this which should I get?

  I have already cancelled my package of adobe photoshop, but am still getting billed for the month. This is the second time. What should I do?

  Contact the Adobe Support directly (when they are available)

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• still not get the procedure to compile and run

  Sorry again for the problems.
  Here is the entire SQL, but I suspect seriously the problem is originally somewhere, with one of the statements.
  Any help would be appreciated. Given that I get do this work without a stored procedure (all except the statement execute immediate), then I guess my logic is ok, but as I said, something is not upward.
  
  Thank you
  Floyd
  
  
  The sql is:
  coil proc.err
  CREATE OR REPLACE PROCEDURE floydw.loadtable_config AS
  
  I have pls_integer;
  sql_stmt VARCHAR2 (4000);
  all_names VARCHAR2 (4000);
  all_names2 VARCHAR2 (4000);
  TYPE typ_coltab IS TABLE OF dba_tab_columns % ROWTYPE INDEX BY pls_integer;
  coltab_table typ_coltab;
  coltab_table2 typ_coltab;
  coltab_rec dba_tab_columns % ROWTYPE;
  CURSOR cur is SELECT *.
  FROM dba_tab_columns where owner = 'GWSTAGING_SENTRYPROD' and table_name = 'CONFIG ';
  
  BEGIN
  I: = 0;
  Heart OPEN;
  LOOP
  EXTRACT the heart in coltab_rec;
  When the output cur % notfound;
  i: = i + 1;
  coltab_table (i): = coltab_rec;
  coltab_table2 (i) .column_name: = "" ' | " coltab_table (i) .column_name | '"' ;
  END LOOP;
  
  all_names: = NULL;
  all_names2: = NULL;
  
  FOR j IN 1... I have
  LOOP
  all_names: = all_names | ',' || coltab_table (j) .column_name;
  all_names2: = all_names2 | ',' || coltab_table2 (j) .column_name;
  END LOOP;
  
  all_names: = SUBSTR (all_names, 2); -Delete ',' start of list
  all_names2: = SUBSTR (all_names2, 2); -Delete ',' start of list
  
  sql_stmt: = 'insert ' | coltab_rec.table_name | ' (' | all_names |) ') SELECT ' | all_names2 | 'OF' config"@sentry_l;';
  
  -dbms_output.put_line ('run' | sql_stmt);
  run immediately sql_stmt;
  END;
  /
  
  
  If I try to create such what, I get:
  SQL > show errors
  Errors of PROCEDURE FLOYDW. LOADTABLE_CONFIG:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  7/3 PL/SQL: ignored element
  7/31 PLS-00201: identifier 'DBA_TAB_COLUMNS' must be declared
  10/14 PL/SQL: ignored element
  10/14 PLS-00201: identifier 'DBA_TAB_COLUMNS' must be declared
  11/18 PL/SQL: statement ignored
  12/8 PL/SQL: ORA-00942: table or view does not exist
  18/5 PL/SQL: statement ignored
  18/20 PLS-00320: the declaration of the type of this expression is
  incomplete or incorrect
  
  21/5 PL/SQL: statement ignored
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  21/24 PLS-00320: the declaration of the type of this expression is
  incomplete or incorrect
  
  22/5 PL/SQL: statement ignored
  22/22 PLS-00487: Invalid reference to variable
  "DBA_TAB_COLUMNS % ROWTYPE.
  
  30/7 PL/SQL: statement ignored
  PLS-00487 30/56: Invalid reference to variable
  "DBA_TAB_COLUMNS % ROWTYPE.
  
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  31/7 PL/SQL: statement ignored
  31/61 PLS-00487: Invalid reference to variable
  "DBA_TAB_COLUMNS % ROWTYPE.
  
  37/3 PL/SQL: statement ignored
  37/33 PLS-00320: the declaration of the type of this expression is
  incomplete or incorrect

  Hello

  Apparently, there is something wrong with the dynamic SQL statement sql_stmt.

  sql_stmt := 'insert into ' || coltab_rec.table_name ||' (' || all_names || ') SELECT ' || all_names2 || ' FROM "config"@sentry_l ;' ;
  

  I see an error: sql_stmt must not end with a semicolon. Try:

  sql_stmt := 'insert into '
           || coltab_rec.table_name
           || ' ('
           || all_names
           || ') SELECT '
           || all_names2
           || ' FROM "config"@sentry_l' ;
  

  Looks like you have a commented line scheduled for debugging sql_stmt:

  --dbms_output.put_line ('executing ' || sql_stmt) ;
  

  This could be a good time to use it.

  Remember that the names inside quotation marks are not automatcially converted to uppercase.
  So, if you say

  ...      || ' FROM "config"@sentry_l' ;
  

  then the table name config (all lowercase letters) should work on sentry_l.

• I tried everything but still not get any sound in Firefox.

  Firefox works except there is no sound. I've refreshed it, tried safe mode, checked plug-ins and everything else that the

    Firefox advice gives but still cannot find the off and on switch.  The other browsers work fine.
  

  I he did not notice until I sent the answer above the sound now works. When mozilla sopport came, he arrived in Fox browser, I then tried places that I said to you and it worked, - strange, but I don't know what happened.

                                            thanks anyway
  

• I installed restaurateur classice of theme and restored throbber, but still not get the throbber to appear. How to operate?

  How can I get the activity indicator to work?

  Hello, could you post that the ctr help wireless http://forums.mozillazine.org/viewtopic.php?f=48 & t = 2827985 instead? Here you can receive the best support for any questions...

• Can not get printer to print

  Just install the HP LaserJet Pro MP M127fn and my Mac found the printer and are wound the jobs but then nothing is printed.

  Any suggestions?

  Thank you

  Natalie

  Take a look at this linkHP.

• What should I do to get my pc to play through the TV? Ive connected the two, but still not getting all of the music television.

  Ive connected the two, but don't know how to get the sound to play through the TV speakers.

  Standard graphics cables don't carry audio, you need HDMI cables to the video with audio. If your PC or TV has no audio HDMI capability must come from the audio output jack on the PC and go to the audio in connector on the TV, which is probably phono, so you'll need stereo Jack 3.5 mm to phono plug lead (or 3.5 mm jack on some audio input of your TV is compatible).

  Tricky

• still not get resolution just what is a vic player, I'm not a computer genius

  always ask for the resolution to change what is a vic player, I'm not a computer person

  always ask for the resolution to change what is a vic player, I'm not a computer person

  VLC Player

  Have you updated your graphics driver? If this isn't the case, update the driver - visit the manufacturer's Web site to download and install the latest graphics driver.

  1. Click the Windows 7 Start button.

  2. Type the following command in the start search box, and then press the enter key:

     devmgmt.msc

  3. Scroll down to graphics cards and expand that to know what graphics card is there.