Stop a picture scroll at some point in the page

Similar Questions

• Magic mouse does not scroll up and down in the Pages?

  Hi my Mouse 1 Magic suddenly stopped scrolling up and down in the Pages, BUT: it scrolls by always going up and down in Safari and some other programs I've tried like overview and reminders.

  If you are using El Capitan I believe that there is an update of Pages since last October.   Have you downloaded.

  In my view, the current version number with the El Cap is 5.6.   Failure to have done might be the problem.

• How can I eliminate the scroll for different elements of the page bar?

  I downloaded DreamWeaver CC 2015. I had worked through a tutorial on DreamWeaver CS3, which included a cap, a sidebar, and a main display area. The main display area was scrollable, but the other sections were not. Unfortunately, I lost this tutorial, and I don't know how the non-defilement sections have been fixed. Now, I'm trying to find out how remove (turn off) the scroll bar on some areas of the page. And since I'm on bootstrap.css, the style settings may prevent my being able to eliminate scrolling. I don't seem to be able to substitute the bootstrap.css styles, and I guess that's the way that DreamWeaver is designed. What is the magic trick to do this?

  Ben Pleysier wrote:

  engineerbob wrote:

  The section that I wanted the scroll bar is the one with the H2 heading + paragraph.

  Bob,

  I see that you use for your development, which is a good thing because it also allows delicate design Bootstrap. Problem is that - scroll bars are not useful in RWD, especially when it comes down to the smaller size of the screen.

  I don't particularly like the scroll bars myself, but the 'Tweet' is popular and use it. On small areas and within the limits I didn't see no problem in smaller screens.

• Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages and some of them are constantly a quantity apparently endless on top of e

  Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages, and some of them are constantly a quantity apparently without end on top of the other. For example, I replace to change the color of the border and notice a black there's below him so I deleted the extra and there is another and another and another... EEK. I can easily hide them, BUT I fear they will lead to complications in the case of pre-press printing. What is the cause? What can I do to prevent it? How can I get rid of the stack-up?

  It's always haapening, if you substitute any element on the page and later master you reapply the same or another master. I would NEVER say to replace any itme master page in the page. Instead create another master based on the first, make the substitutions and apply this master. Substitutions on the pages should be avoided in all cases, not only for the problem you described above, other issues of accessibility will also come into play.

• can I put a specific point on the page to go with a button?

  I got a page of 1024 x 3072 and I put a button to go to a specific point on the page, for example, to 650px to 724px just using a button.

  So my question is can I do it?, how?... Thank you

  Not supported.

  Bob

• Vietcong, a game developed in 2003, which could be played on Windows XP crashes at some point at the beginning of this game on Windows 7 (Home Premium 64-bit)

  OS system - as above, namely Windows 7 Edition 64-bit family.

  Computer model - Packard Bell ixtreme. CPU-Intel (R) Core (TM) 2 Quad Q8300 2.50 GHz

  RAM - 6.00 GB

  Graphics - Nvidea GeForce GT 220

  Title - VIETCONG - Purple Haze Gathering Pterodon/illusion/game (the company has Take2)

  The game seems to install ok and plays normally up to a certain level. At a specific time in the 'campaign', the game crashes and the computer returns to the office. An icon appears on the compatibility of the parameters. For example, I tried different settings in Windows XP service pack 2, among others, but exactly the same things happen at the same point in the game. It is a game of great "cult" and I want to keep. You are able to help.

  Thank you very much

  Rob

  Hi Rob,

  Here are a few things to try.

  Check the event viewer for errors related to the game. See the link below to open the event viewer

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Update your graphics card if you do not.

  Consult the following Microsoft articles for more information on the update of drivers:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Some games that worked on the old operating system may not work in your Windows 7 64-bit operating system.

  There is currently no information on the compatibility of the Vietcong with Windows 7.

  In the meantime, contact the game manufacturer and check if the game is compatible with Windows 7 64-bit edition.

  If it is compatible, then patches to make it work under Windows 7. Download and install the patches of the game if that's the case.

  http://www.Vietcong-game.de/

  Aziz Nadeem - Microsoft Support

• When clicked on a menu item is still done scroll to this part of the page but not properly noted in the menu more

  Today I opened my site in Muse to do some small updates and my head was completely broken, I have a header menu that uses the anchor points, and when clicked on a menu item is still made this part of the page-scroll but not correctly highlights the menu more.

  I also had a slideshow put in place to change each px 1100 scrolls, but who has stopped working completely.

  How did this happen without changing me anything? or I could go back to an old backup?

  It turns out all I had to do was reboot all and everything was fine, the program must just acted buggy

• How can I stop Firefox displaying Javascript/CSS inline when viewing the Page (CTRL + U) Source?

  Recently, I noticed that the Javascript and CSS files are shown online while you watch a page source. Is there a way to stop the Firefox to do this?

  Thanks for the test.

  When I try Reddit, this stylesheet is not inline in the page.

  I can't access/browsing Netflix, I'm redirected to a login screen. But it seems strange that when I try to navigate around Netflix, I'm still on HTTPS and you load on HTTP.

  This problem happens only in the pages of HTTP and not HTTPS pages?

  Is it possible that some sort of proxy or security filter modifies the page until it reaches your browser?

• Frames with scroll cancelled by video on the page

  I had wired a framework floating (tab) at the bottom of my page. Tested and everything works fab. I added a layer above this area and dropped several video clips in the layout. These clips are part of the content of the main page.

  As soon as I did, the container and the scrollable content place in this container is not made when the file is published/tested. It fails on the desktop and iPad Viewer.

  If I hide the layers contain video clips, the contents of the scroll frame returns and works very well. Is this a known problem and even video to be present on the same kills page content drop-down?

  New pictures floating along side, video content and I have not tried the myriad of hacks to make it work. You want to start with the obvious questions... it should work?

  Thank you

  Steve

  UPDATE:

  Correction of the problem. Think that I followed it it down to the fact that two containers of scrolling have been appointed to the same thing. So I've changed that. I can speculate only that was the issue, but we noticed that a link has not properly displayed in a scrolling box, and not the other. He actually traded stand published.

  We have rebuilt the two frameworks scrollables on 1 page, and then that of the multi - state. And it seems to work fine now.

  Phew, what's wrong with the head!

• Change the color of the point to a point on the page label

  I have several page elements that have labels. My customer wants to change the default color of some of the labels of page elements be of different colours on the page so that they stand out. Can I do this? I can change the color of the data in the actual cell, but I can't change the color of the label.
  
  Example:
  
  ARTICLES: < given here >
  
  I fill the < data here > with a column in a table. I can change that, but what they want to change me is the color of the type in the label ELEMENTS:
  
  Could someone tell me please the process for this if possible.
  
  Thank you
  Patti

  Patti,

  You can do this by adding some CSS where you have the point label.

  Change the desired page element, goto label box, add the CSS label. For example,.

  Item:
  

  I hope this helps.

  -Chris

• On my Macbook when you connect on some websites of the page shows only a few Chinese characters gurbled.

  When I log into my bank address online or Web site secure my business does the page is garbled with some Chinese characters but the same page is OK on Safari.

  The default value is used when a server does not send an encoding.
  
  The default encoding is Western (ISO-8859-1), so it's best to use this setting.
  
  If pages give problems then they may need UTF-8 or an encoding, you can easily change the character encoding menu now you know where to find specific windows.

• The title bar has stopped working and now I can't close the page with the cross or minimize or maximize, cannot close the pages

  Toolbar is not functional cannot use the cross at the top to close and cannot minimize or maximize the pages.

  What program is this (name and version)?

  Are you sure that the title bar is not hidden because the screen is in full screen mode?  Make sure it is in normal mode (usually hit the ESC key will do that).  When you say that you "cannot minimize or maximize or close pages" is because you don't see these icons or press them, and they do not work?  You see the title bar?  Is it the same with EACH program or all instances of this particular program, or only with this page?

  If it's an open program, you can still use the toolbar at the bottom of the screen and do a right click on the prgram open and then click Close.  If it isn't there, it can also be hidden. Move your mouse to the bottom of the screen and see if the toolbar appears.  If so right click on it and select properties and uncheck Hide able toolbar and click OK to close - that way it will always show (except when it is in full screen mode).

  You can also press CTRL-ALT = DEL to bring up the Manager tasks, go to Applications and select the program that you want to close, and then click end task.

  If you have access to the Menu bar, you can usually go into file, and then click close tab or simply close.

  If you can help me with answers to my questions (assuming that what I said has not solved the problem), then I will answer you with some suggestions to solve the problem (whatever it is)-, but there are too many possibilities without knowing more about the problem.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hidden entry point causes the Page not found error

  Hello.
  
  I use Apex 4.1.0 on Oracle 10.2.0.5 and mod_plsql (Oracle application server).
  
  I created an application with two tabs.
  
  On one of the tabs in a block of Annonymous PL/SQL, I have the following code:
  

  begin
    htp.p('
  <!DOCTYPE html>
  <html>
  <head>
  <title>AMO PROPOSAL CHECKLIST</title>
  </head>
  <body>
  <h1>AMO PROPOSAL CHECKLIST</h1>
  <form action="" method="post">
  <input type="hidden" name="FS-1" value="1" />
  text2<label for="C12" class="hideMeButHearMe">text2</label><input type="text" name="f02" size="20" maxlength="12" value="" name="TEXT-Q12" id="C12" />
  My Question
  </form>
  </body>
  </html>
  ');
  end;

  When I run this page, the HTML code is rendered correctly.
  
  However, if I then click the other tab, I get the error: Page not found.
  
  I've narrowed the problem to the inscription of this point of entry hidden: < input type = "hidden" name = "FS-1" value = "1" / >
  
  If I simply delete this hidden, switch to another tab throws any error.
  
  I ran this page using Firefox with Firebug. But does not help me understand why this hidden item throws the error.
  
  Anyone know why this is happening?

  EEG wrote:
  Hi, fac586.

  Well, today the good folks at Oracle/Apex unlocked my account apex.oracle.com and so, was able to connect.

  I created a new application:

  Workspace: EEG
  Username:   [email protected]
  Password:   galaxy (Note: all lowercase)
  
  App Id: 28044 (Name = Debug Page Not Found Error)
  

  I created a new user of fac586 , so that you can follow what I've done through the activity if necessary log...

  The application uses the same theme (Sapphire, #17). Page 1 contains a region PLSQL Annonymous Block in which I simply preprogrammed the exact same HTML code that throws the error "Page not found" that started this post. The other page is just a page of report.

  When the application runs, page 1 immediately appears with the HTML code. However, by clicking on the 'Report' tab (for the 2nd page) get the Page not found error.

  If you have time, I'd appreciate it if you could kindly look at what I've done. It would help to understand if you can translate essentially advice you have already posted to what is shown in this sample application.

  After seeing what you do more in detail I am now actually suggesting a completely different approach ;-)...

  Given the potential duration visualized forms and the obvious importance of the applied CSS, preview style has really come in the form of a separate document. (As noted above, you can not have more than one element html, head and body in the page and that and the CSS that you attempt to register is completely destroying the presentation of the APEX on page 1.)

  Therefore, I want to say now is made the preview in a separate document in an iframe within an HTML region, as illustrated on page 3:

  Document source is a process on demand in your application from which you can call a procedure that returns the HTML survey form. The iframe is automatically sized to display the complete form.

  You still need to take measures for the visualized form either by ferry to sand/locked so that it can be made: it is the case in the examples the measure where there is no form action and no submit button, but it is unclear if this is indeed the case in your application?

• video reset to start the point - after the page transition

  I'm looking for a way to make sure a flash video reset at startup after a page transition. For the moment that the video starts just to the place, it ended after the initial page is displayed. I found some info in the FAQ that enabkes reset components but not for Flash Video elements.

  Anyone know how?

  Did the video come from? I suspect, it has been imported into SWF using Flash Professional. This is the original file, you need to bring in Flash Catalyst.

  Chris

• How to program the computer to stop at some point in the night in Windows XP

  Running Windows XP Home edition - how to plan my PC (office) at the stop at 23:00 every day.

  Thank you
  Ben

  Read this article for detailed instructions.

  If you believe in the Dungeon it simple and right in policy.

  1. go in Control Panel > scheduled tasks.

  2. double-click on 'scheduled to add task' to open the scheduled task wizard.

  3. click on next.

  4. click on the button 'Browse' below the list of programs.

  5. navigate to C:\Windows\System32, and then select shutdown.exe

  6. Select daily in time options and click Next.

  7. Select your time and select all days of the week.

  8. Enter the password if you set one.

  9. finish the wizard by following the instructions

  10. right click on the task you have planned, and then click Properties.

  11. in the field "run" add s so that it looks now like -

  "C:\WINDOWS\system32\shutdown.exe-s" (without the quotes)

  12. click on OK.