Stop following

Similar Questions

• Stop following the content

  Earlier, I chose the option to follow iTunes for Windows.  I have now solved the problem and want to stop following.  I can't find anywhere to do this.  I know that his need to be in there.  Can someone tell me where it might be?

  Follow the instructions here > Learn how to manage your subscriptions

• 'Stop following this discussion' does not always work

  I clicked on stop after a few discussions and they are off fine.  Then I tried clicking Stop following this maintenance on March 4 and I can not turn off.  I tried to refresh the screen, and it's still there.

  Suggestions?

  

  I'll ask the hosts to look into this for you.

  Just checking. If you go to Maintenance of communities of Apple 04/03/16, 21:00-03:00 PT Support is there a blue tick next at the top of the thread, and if you click above does go gray?

  TT2

• How to stop following a topic in the forum of the Apple users?

  How can I stop following a topic in the forum of the Apple users?

  Click the button following the top of the thread. If you are using an adblocker, you may need to disable temporarily to do this.

  (140801)

• After starting the setting stop following Hibernate causes the blue screen errors.

  Hello

  I use XPSP3 and seems it regularly I errors blue screen when I power following a judgment down, which followed the hibernation.  I have no problems otherwise.  Do I need to provide details specific to help solve this problem, or is the above is enough to get some ideas?

  Can anyone help with this?

  Thank you, Bob

  Hello to all of you,

  Well it must have been a harbinger of bad things to come as the 11/2 my computer would not not even start.  So I'll have a few recovered data and starting over.  Thanks anyway.

  Bob

• How can I stop following a thread I did not?

  I received an email regarding a topic I haven't posted in.  I want to only receive responses to e-mail to the questions I posted, or the responses.  How to stop these independent emails?

  The blockage of the e-mail notification is a function of this forum not for Windows 10 has no importance.

  When you get to the list of threads on the activity tab in your profile, E-mail stop will be beside the wire on the right side.

  I don't really know why you are getting emails relating to the threads you have not responded well.

  

• ITunes does not recognize the songs and the old shuffle stop at 30 seconds

  I have an old shuffle, 1 MB, maybe a 2nd gen, gold (A1204 EMC). iTunes (iOS 10.11.4 12.4.1) has problems with the shuffle. He quickly recognizes the shuffle, which appears as a mounted device and on the desktop a moment, then it reports that there are no. The shuffle disappears from the desktop and I get a warning saying that it has been deleted without eject.

  ITunes then freezes and I have to force quit.

  I can charge the shuffle, but when I go to listen to the songs, they last 30 seconds or less, the following starts then and in about 30 seconds, it will stop followed by another song.

  I tried to reset (turn on, turn off for 5 seconds and turn on) several times but nothing changes. I tried to erase using disk utility (15.0). The shuffle will not disassemble process works.

  All of the suggestions. My 2009 iPod Touch works better than this most recent shuffle. I like to use the shuffle when you do yard work.

  Same thing happens when I try to sync the shuffle using a snow leopard starts.

• Unable to follow 'show Email '.

  It has been suggested to me that I subscribe to notifications of system state using the link below and I select is given in "show Email".  Unfortunately, the only options I had were 'Connections Stream', 'Inbox' and 'Stop following', see image attached.  When I checked my preferences area, "Watch Email" was not an option he no more.  I checked with a few other colleagues and they were able to select 'Send watches' without problem.  Am I missing a setting or is there something funky going on with my profile?

  The Eloqua System State

  Hi Corey,.

  You can create a data flow, or use connections to follow it. E-mail watches was a custom stream that has been acquired to capture users that before the community and has had updates. This guaranteed that they were not lost. If you've followed the blog and have your preferences checked for emails, you won't miss a thing!

• did stop ' t back button array as3 swf loading

  I load a swf in the main file of a picture and its works well.

  and I need to add a button previous and next to load other SWFs.

  I then add and the previous and next button buttons works well, it stops after loading swf last stop followed and all.

  but the previous buttons doesn't work very well. It's keep clickable and keep tracing values less and retreating.

  any help will be honorable

  Thank you

  my code is here

  I is not written my script to load because I only need to know the previous button

  Thank you

  var myMovies:Array = ["Panel 1.swf", "Panel 2.swf", "Panel 3.swf", "Panel 4.swf", "Panel 5.swf", "Panel 6.swf", "Panel 7.swf", "8.swf sign"];

  var int index = 0;

  var numberOfPages:Number = 1;

  \\

  \\

  \\

  \\

  
  panel_control. Text = '01 '.
  next_mc.addEventListener (MouseEvent.CLICK, next_movieclip);
  pre_mc.addEventListener (MouseEvent.CLICK, privious_movieclip);

  function next_movieclip(e:MouseEvent)
  {

  If (numberOfPages < myMovies.length - 0) {}
  numberOfPages ++;
  panel_control. Text = '0' + numberOfPages;
  index = (index + 1)%(myMovies.length);
  
  loader.unloadAndStop ();
  trace (numberOfPages);
  
  loadSWF();
  
  }

  
  }
  function privious_movieclip(e:MouseEvent)
  {
  If (numberOfPages < myMovies.length + 8) {}
  -numberOfPages;
  panel_control. Text = '0' + numberOfPages;
  index = (index - 1)%(myMovies.length);
  
  loader.unloadAndStop ();
  trace (numberOfPages);
  
  loadSWF();
  
  }
  }

  Chances are that if you go back the next line should be changed to

  If (numberOfPages< mymovies.length="" +="">

  TO

  If (numberOfPages > 1) {}

• Persistent problems with the Magic Mouse

  I have persistent problems with my Magic Mouse. He often stops followed (i.e. the cursor on the screen does not move when I move the mouse), or the input button on malfunctions (i.e. I don't click and drag, or cannot right click, or when I click on something and that you hold the button down it doesn't "stick").

  I called Apple and they took me through all the troubleshooting steps (reset the SMC, PRAM, etc.) and I finally get a new mouse. I got a new and have exactly the same problems!

  The ONLY thing that solved the problem by restarting the computer, or logging in and out. But the problem then begins again after anywhere from a few minutes to a few days (the most often within hours).

  Any ideas?

  Here is more information in case it is useful:

  • I plugged a wired Logitech mouse, and to my surprise, it also does not work. I thought that the problem was related to the wireless/Bluetooth connection, but this clearly isn't.
  • I have a Wacom tablet attached to my computer, and it works very well, no matter if it has connected (via USB dongle) wireless or wired (via USB).

  There seems to be something wrong with any particular software/system control the mouse.

• How to set preferences so that open new tabs to the same page that activates when the command-T has been affected?

  By opening a new tab, the default tab opens to thumbnails based on recent history. The Safari, I want the new tab to open * to the same page, as was active when command-T was hit *. What are the specific actions, to set the default value (preference), new pages to open 'same page '? ('Same page' is check in Safari preferences box).

  Note, I've sailed available Support of Mozilla and using about: config have reset browser.newtab.url so that the new tab appears empty (stop followed recent history for this purpose).

  Note, most importantly, I found this article of Support Forum, which, although written challenge, gave me a temporary solution:

    * https://support.mozilla.org/en-US/questions/891635
  

  (The temporary solution for the Mac OS is to command-click the icon 'Reload current page' in the url/address box in the browser toolbar, which opens a new tab in the same window).

  However, I would like to define this as a preference permanent and would ask someone give me a solution. Cheers, teacher

  LeProf_7272 wrote:

  if I can possibly just create a new config line
  

  You can't, that's why I suggested the modules above. There is no option in the user interface or preferably hidden in Firefox that can duplicate a tab whenever you open a new tab browser.newtab.url can only be set to a fixed address, what address is to be opened in the current tab.

  Are the only two built-in methods to duplicate a tab:

  1. Hold down the Option key and drag the tab to a new position on the tab bar.
  2. Hold down the command key and click the reload of the address bar.
  • Use mouse shortcuts to perform common tasks in Firefox

  You can make feature requests by filing development bug reports or by opening the Help menu by clicking on your comments.

  • https://developer.Mozilla.org/docs/Mozilla/QA/Bug_writing_guidelines
  • https://input.Mozilla.org

• I am unable to unsubscribe from communities of APPLE. mailbox had 3-4 pages of comments. Have everuthing turned off and saved the changes... Help

  I am unable to unsubscribe from communities of APPLE. Mailbox has 3-4 pages of comments by email. Have everything turned off and saved the changes... Help

  , You click on "stop following" in each community/thread you posted in?

• Receipt of the notice of my validated activities

  It seems that I get no notification of my answer posted activities.

  I tried to add my preferences option, but I get thousands of emails.

  I just want to receive MY messages update only.

  Any DETAILED response will be appreciated.

  Thank you

  It's not quite that degree of control. You can enable notifications by e-mail or disable here: https://discussions.apple.com/user-preferences! input.jspa

  If they are on you get a notification for all content that you are 'suite '. You will automatically follow any thread that you contribute to the, and no matter where you clicked on the blue follow the link at the top of the wire. You will also receive notifications for all activities in any forum you have chosen to follow. You can disable all these individually and then stop following any thread you made a comment in but not want to hear again.

  Alternatively you could disable all notifications by e-mail and use these links to track responses to your messages, the first three highlight of discussions with the new activity:

  Discussions-authors

  Discussions participated

  Following Discussions

  Recently seen Discussions

  See also the communities and categories Site map.

  TT2

• Encoder triggered Acquisition (Single Channel N samples)

  Hello Internets,

  I am an inexperienced user of LabVIEW, I'm trying to set up a system in which blood samples are taken when triggered by a digital pulse.

  I'm sampling using a PCI-6250. I have an updated encoder in place that emits a digital pulse once per turn. I would possibly take about 1000 samples in a very short time triggered by this time by pulse rev.

  The problem I have right now is that I seem to get a lot less reading I expect otherwise, the LabVIEW program, I'm running also takes a long time to stop following my pressing the stop button.

  The table fills also in a way that is strange to me, perhaps someone could it explain?

  Thanks, any help would be greatly appreciated!

  Hi Relaxidermist,

  There are a few things in your current code that seems contrary to your goal:

  "I would possibly take about 1000 samples in a very short time triggered by this time by pulse rev."

  Assuming that you want to read 1000 samples for each received external trigger and you have several triggers coming, I would start by this example:

  Redeclenchables analog input finished using digital triggering

  I'll be the first to admit that he is not the most intuitive - on the M-series (like your 6250), use a meter to output to an acquisition really triggered.  You could rearm task in the software, but this takes time and is prone to triggering signals are missing.

  If you were on a series of X (63xx devices), the code you have is close, but you must make the following changes:

  (1) use the clock embedded to your example of clock instead of the external signal for PPR source.

  (2) make the task finished instead of continuous.

  (3) enable the redeclenchables property - it is not available on your device of the M series (where workaround posted above).

  Best regards

• PID state machine problem

  Hello.

  I have a problem with my design of State machine and I need help to know what to do.

  I m using a state machine six steps for HVAC test machines. Password-> Idle it down-> Run-> Acquire-> Report--> Shut. Run and acquire the States have PID controls in them (almost identical States) and very fast three-way-valves they´re for the desired control of the temperatures of the water mixture. I m running try to get static values for temperatures and I m satisfied with them, moving to acquire the State to get the data in the report. My problem is that when the race to acquire, PID control outputs from scratch and at that time there static temperatures have disappeared. Worst case is that the tested machine HVAC stops following liquids from bad weather and I start from the beginning.

  Is there a way to tell the PID.vi the release of starting a specific value? In this case, continue to the last value that they released in the State of enforcement?

  I know that scheluding of gain would do (machines would be not closed) but I Don t want to use it because the original problem would still be there.

  Arctic_Fox wrote:

  So PID vi:s remove from the state machine, placing them inside the while loop that surrounds the state machine and leaving all necessary writing DAQmx-functions inside the race and the States Acquire would make corrections on the positions of the valve only on those two States. Right?

  It is a good idea.  I leave the DAQmx functions outside the state machine as well.  If you need to write a fixed value for the outputs when the PID is not running, use the PID that you already have to determine the value to write (output PID or anything else) on/off switch.  In addition, I would make sure the reset of PID entry is true whenever the PID is not running.