Stop, or manage the system, daily update volume information
My Vista computer starts his incessant drive fly at 17:45 every day and continues for about 20 minutes. Indexing is disabled, the defragmentation is disabled, no program updates are running, and nothing is "intended" to run at this time, as shown in my task scheduler. Process Explorer displays the culprit (unlikely) the System Volume Information update of crud that take place.
My question: is it possible to stop this activity on-site, or forever, without disabling the system restore works? Note: I got my restoration of the system to be updated automatically once a month, and yet this crud Sys information theft goes on daily. Help!
Hello
By default, the system restore takes up to 15% of the total capacity of your hard drive under Vista. It is not possible to stop the update of system volume information.
System Volume Information is a hidden folder protected operating system on each disk partition, which stores information for the system restore function.
However, the cliché reserves a portion of each volume containing Previous Versions enabled in order to store the shadow copies. By default, the space reserved for shadow copies is 15% of the size of the volume. You can use the command-line tool Vssadmin.exe to change the size of this reserved space.
To reclaim space by deleting all but the last restore point follow the steps mentioned below.
a. Click Start, and then select all programs.
b. click on Accessories
c. click System Tools
d. click on Disk Cleanup
e. If it makes the files to clean up, select files from all users on your computer.
f. If it invites the reader to clean, select (c :))
g. click on More Options
h. click on clean under System Restore and shadow copies
i. click on Remove
j. click OK
k. click on delete files
See also the below mentioned link.
http://TechNet.Microsoft.com/en-us/library/cc749185 (v = WS.10) .aspx
Tags: Windows
Similar Questions
-
When I send an e-mail, the system automatically updates the message in my PROJECT folder. This happened last week. How to stop this annoying problem?
I use hotmail. (but is seriously considering moving to something else)
You need to ask the experts of Hotmail in their forum. I've never used the program.
Windows Live Solution Center Hotmail Forum
http://windowslivehelp.com/forums.aspx?ProductID=1 -
When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
use widows xpHello
- Have you tried to Hibernate for ever in the power settings option?
To resolve this problem, you can follow the steps below.(a) click and start(b) type power Option in the start search bar.(c) now select click Change plan for the current plan of the selected power.(d) now click on advanced power settings.(e) scroll down and click on the sign more next to sleep.(f) now click on allow the eve hybrid and turn it off.(g) click on the option put into hibernation after and set it to never. -
Why do the same daily update KB25556532 Update window
I get the same daily update, installed KB2556532 and it always tells me that I have this update to install
Hello
Method 1:
I suggest you to check if the update is installed.
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
Method 2:
I suggest you follow the link and check.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
-
Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).
Thank you!
I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:
In
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\
The 'Control' key with a string value 'ActiveService "=' Modem' was absent.
Also in
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001
I added a 'Control' button with a string value "ActiveService" is"ksthunk".
Finally, I restart my system and Windows again recognizes my camera and the driver installed!
Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.
I hope this helps someone!
NOW I'M GOING TO TURN OFF WINDOWS UPDATES!
-
Installed the "system tool update" but still have the same problem.
Greetings,
These 3 updates (KB971029; KB973540; KB982525) continually fail.
Error details: Code 800 b 0100
I have installed "The tool of the system update" & while he plans once the updates will never happen.
And when a manual update is done WindowsUpdate Notepad says that five updates have been detected.
Here are the updates:
{0527AD53-300D-4704-9C06-4CE155B7846D}.100 to search result
{BBA57C55-8EBB-4CEF-B2BA-B8192B272379}.100 to search result
{695F384E-105F-462E-88FE-C88C46F542D0}.101 in search result
{6D5BD96F-C862-4888-9EDD-3514384CBD8F}.101 in search result
{BCD51CB4-4166-4C6E-A2CC-AB6BBDCB4E08}.103 in the search result
Found 5 bets at day and 66 categories in research; evaluated Appl. rules of 1192 out of 2131 deployed entitiesEdited to add the following:
Manager updated SelfUpdate NOT required: current version: 7.4.7600.226, required version: 7.4.7600.226
Assessment of the applicability of the installation package ' ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226;
Installation package "ActiveX-SelfUpdate-WUClient ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226" is already installed.
Assessment of the applicability of the installation package ' WUClient-SelfUpdate-aux-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226.
Installation package "WUClient-SelfUpdate-aux-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226" is already installed.
Assessment of the applicability of the installation package ' WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226;
Installation package "WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226" is already installed.
Form verification SelfUpdate. SelfUpdate is NOT necessary.
Help & thanks in advance
Hello KCD-622,
Thanks for the response back. If you have your data backed up on an external device or a dvd, you can always perform a clean install and let it update.
With the boot, you disable the services to see if any third-party service is causing the problem.
Please let us know status.
-
DNS stopped working after the latest Vista updates
Yesterday my Vista Home Premium has been updated by Microsoft through the automatic update process. After the update and reboot network stopped working. I was able to trace this DNS no longer works. I was unable to solve the problem until I supported updates, after which the system returns to normal operation.
Now, of course, updates want to be reinstalled, but I don't want the network to fail again. Any ideas?
Change how to get updates:
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understand the Extras in Windows Vista and Windows Update info is at the link above.
Right click on those you don't need > UAC prompt > it hide.
Never install party hardware driver updates 3rd through Windows updates.
Go to the manufacturer's website, instead.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
See you soon.
Mick Murphy - Microsoft partner
-
I noticed that Windows 7 RTM (all versions, x 86 / x 64) has a bug on its features to Software Installation service which causes updates Windows hang during setup of the system (i.e. Windows is stuck on the message "preparing to configure Windows - do not turn off your computer"). M$ suggests to perform a repair with system restore or re - install the operating system from scratch, but is not an effective solution.
Given that Microsoft has published 5 updates for setup of functionality of software on Vista, I wonder why they don't release a similar patch for Windows 7?
I opened a support to report the problem incident, which probably occurs after installationreliability KB974431 update(Windows6 1 - KB974431 - x 64.msu).
When Windows Update installing KB974431 update , the following error message appear when Windows configures updates after the system restarts and the installation of the update fails with error code ofC004F050 .
Above the error due to the Windows operating system can not pass genuineWindows validation (WGA) . installation of KB974431 will fail if validation fails, or returns a status not valid or not genuine. Here is the procedure to fix it:1. click on Start .
2. in the run box, type cmd and press ENTER.
3. you will see the black command prompt window.
4. enter sfc/scannow
5. If this disable the grace period, it is reset using this code: slmgr /rearm
6. restart your computer.
7. try to update again.Hope this solution helps!
-
Windows Installer service is stopped 3 error "the system does not have the specified path.
Original title: Windows Installer Service is stopped
When I try to start the windows service install, I get: Windows could not start the Windows Installer Service on local computer.
Misconception # 3 "the system does not have the specified path.Hello
Try the methods below and check if the problem persists.
Method 1:
I suggest that you follow the steps under the heading Windows Installer issues in the link below to fix the problem.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651#reso1
Method 2:
You can also try running a Scan SFC (System File Checker):
SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
-
The Windows Vista system upgrades
Configure automatic updates to one setting other than "auto". See to change the automatic update of the settings here: http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsvista.mspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
My system does not work properly. Something has closed most of my Windows programs. How it happened and why I don't know. I can not do that more with Microsoft. First it was XP, Vista now. It's like as soon as Windows 7 is out Microsoft has launched programs to destroy Windows Vista. I have to deal with that now. Please if anyone sees this and can help, please help me!
Hello eco123eco,
1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.
2. click on continue or provide credentials admin if prompted.
3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete.
Hope this helps you. Let us know anyway. Make it a great day!
"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
HP Envy all in one PC: Recovery Manager, the system restore is disabled by a virus
Had a virus on my all in one PC envy after a free update to windows 10. Computer has been closing down could not get antivirus to work fast enough. After reboot system had disappeared. There is now no operating system. HP Envy Recovery manager, System Recovery is not highlighted, do not not the possibility to do a restore? Virus stronger than I've ever met. Thank you in advance.
Hello;
Let me welcome you on the HP forums!
It would NOT in fact the virus which prevents HP Recovery Manager to work.While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windows-10-Upgrade/td-p/5170752What you would really need to do, is to erase the entire disk and restore your PC using something known as HP recovery media.
HP recovery media is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs. You must order at HP; they cannot be downloaded.
You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.
Or, if you prefer, you can do the same by contacting HP Customer Service:
If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
If you have difficulties to find a phone number, then try: 1 (800) 474-6836
If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/Good luck
-
Speakers have stopped working after the flash BIOS updated for Windows 8
I had recently changed the OS of my HP Pavilion dm4t-2000 for Windows 8. After that an update of the BIOS flash me suggested by HP Support Assistant, speakers have stopped working. I tried to reinstall the Audio Codec, but it does not work. Could someone help me please?
jaikvk,
Go into Device Manager and uninstall the sound and restart the computer. This will reinstall the driver once more.
Also, it could be a bad installation of the BIOS; You can go to HP.com and re download the update of the BIOS.
Let me know if it helps.
-
WEBCAM PROGRAM STIIL STOPS WORKING AFTER THE INSTALLATION OF UPDATE
I installed the update Windows suggests for the Logitech software, but there is like until LSW has stopped working when I click the icon. It works very well in a chat room but I can't access the software to make my own videos and pictures. Logitech said the problem is is the registry of the computer. How can I fix it? How can I access the registry to repair or do I have to consider and have it fixed?
HelloI suggest you do a System Restore to the point before the update. -
Outlook 2010 has stopped working after the installation of updates
10/11/2015 my system (Windows 7 Ultimate) undertook an update of 15 files.
After the reboot, I started Outlook 2010 and found that he had stopped working.
I have tried several things to correct, but none worked.
I did a system restore to remove all updates and Outlook now works.
One of these updates has a problem with Outlook, but I don't know which.
I need help please.
After you have uninstalled Outlook KB3097877 works very well.
It has something to do with emails with HTML links in them.
Maybe you are looking for
-
I can't load ios9.3. I get a message that I am not connected to the Internet, but I check and I am connected.
-
I have a problem with the return of the browser.
Whenever I open a tab (from the starting page), or a bookmark, I can't use the back button to return to the start page of origin. I have to open a new window and then close the previous page. This happens every time and. Any suggestions?
-
QOSMIO G30 - no sound on HDMI when connected to HDTV in XP MCE.
Hello- Can anyone help with a frustrating problem... How output sound on HDMI in Windows XP MCE? I place the video on HDMI output using * Fn + F5 *-I get a perfect image on my HD TV. However, the sound always comes from my laptop speakers.I have all
-
Markup in El Capitan (11.0) in the Preview submenu always?
Must I keep having to go to the Preview under the VIEW submenu to bring up the toolbar of the Markup every time? Is there a way to auto-apparaître each time preview is open?
-
How can I configure my Xbox 360 as an Extender?
How can I configure my Xbox 360 as an Extender?