Markup in El Capitan (11.0) in the Preview submenu always?

Similar Questions

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• How migrations (El Capitan) not come to the photo library?

  Hello

  I want to use the Migration Wizard to move my user account for my MacMini BUT put the photo library on a separate hard disk from the system drive.

  My MacMini has two internal drives, the library is huge.

  The MacBook (early 2008 - running Snow Leopard) old a MacMini (late 2009 - El Capitan cool running).

  How migrations (El Capitan) not come to the photo library? It seems to only be set for the entire account.

  If I do this, put the library on a separate disk. How to use Time Machine to back up the library?

  The separate HARD disk transfer photo library, and then delete the disk that you are migrating.

  Time Machine backup disks all connected, unless you put them in the list of exclusions.

• El Capitan calendar window opens the mosquito net

  As one of the last updated at El Capitan, whenever I run the application calendar, the main window to open just half of the screen. Incredibly annoying when you are in month view. I tried to resize and then quit calendar in the hope that it would enter the window location, but it did not help. The next time I run the application calendar, the main window open covering just half of the screen.

  Am I the only one having this problem?

  Drag the largest window in any corner.

  If you are out of fashion full screen (Control F)

• The markup extension does not work in the mail. It works fine in the preview.

  iMac, OS X 10.10.5...

  I tried and tried to mark an image in an e-mail message, that I'm composing. I have tried both a new message and a reply. I tried it with PNG, GIF, and PDF image files attached to the message. I found the suggestion of Apple to run "lsregister - kill - seeds" and did, my user account and under sudo. He many .bundle, .appex and a couple of files .opplugin, but none of them was the markup. I made sure the markup has been enabled in system preferences > Extensions.

  The small icon of menu drop-down appears in the corner of an image when I wave the cursor over them, but clicking on "Markup" in the list does not cause nothing to take.

  When I try to call the markup extension, the following text is written in system.log...

  Apr 12 16:50:08 {host.domain} Pkd [4900]: activation pid = 41013 for plugin com.apple.Preview.Markup (1) 120F1A87-AA89-4963-BB88-502448673078 /Applications/Preview.app/Contents/PlugIns/Markup.appex

  Apr 12 16:50:08 {host.domain} secinitd [30716]: No. AppSandbox current cache.

  Apr 12 16:50:08 {host.domain} [45426] markup: plugin sdk "com.apple.ui - service" unregistered

  Apr 12 16:50:08 - last message repeated 1 time.

  Apr 12 16:50:08 {host} com.apple.xpc.launchd [1] (com.apple.ReportCrash [45427]): endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  Apr 12 16:50:09 {host} com.apple.xpc.launchd [1] (com.apple.Preview.Markup [45426]): Service came out because of the signal: invalid statement: 4

  Apr 12 16:50:09 {host.domain} Mail [41013]: plugin com.apple.Preview.Markup interrupted

  Apr 12 16:50:09 {host.domain} Mail [41013]: connection Hub Domain = NSCocoaErrorDomain Code error error 4097 = "could not connect with a helper." (connecting to the service named com.apple.Preview.Markup) UserInfo = 0x610001876f40 {NSDebugDescription = connection to the service named com.apple.Preview.Markup}

  Apr 12 16:50:09 {host.domain} Mail [41013]:-error: error [ShareKit]-[NSExtension beginExtensionRequestWithInputItems:completion: error domain = NSCocoaErrorDomain Code = 4097 "could not communicate with a helper application."] (connecting to the service named com.apple.Preview.Markup) UserInfo = 0x610001876f40 {NSDebugDescription = connection to the service named com.apple.Preview.Markup}

  Apr 12 16:50:09 {host.domain} ReportCrash [45427]: report of incidents recorded version 1.0 (1) [45426] markup to /Users/ {MyName} / Library/Logs/DiagnosticReports/Markup_2016-04-12-165009_ (host). Crash

  Apr 12 16:50:09 {host.domain} ReportCrash [45427]: Remove excessive log: file:///Users/{myname}/Library/Logs/DiagnosticReports/Markup_2016-04-12-141435_ {host} .crash

  Oh, I found a few clues and worked on my fix.

  Referring to the thread Sharing feature works not well, I used

  sudo ls-leOR "/ Volumes/Macintosh HD/System/Library/Caches".

  "to determine that I had not 'limited' flags troubling my Caches. So I jumped to Linc Davis' 9 and 10 steps (in response to 13:40 February 9, 2016) and

  sudo/usr/libexec/xpchelper - rebuild-cache

  sudo/usr/libexec/AppSandbox/app_sandbox_cache_builder - rebuild-cache

  and now the markup extension works in Mail.

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• El Capitan stop built into the optical drive to work?

  Hi people

  I hear and read that El Capitan stop construction in the optical drive to work? I don't know if it's true, and other bugs. I remember when I upgraded to Yosemite this happened to my mac mini, and the super drive was not recognized. However, it was fixed. Although I used to be able to run when any player with the mavericks, but Yosemite has changed all that.

  In any case I had to go to Yosemite, and I'm not sure whether for now, if it's going to ruin my drive and other things. I have a 2012 end pro MacBook. Everyone has problems, or advice to share, or stick to Yosemite.

  Sorry for this Question, it's just that I'm not sure on replacement after hearing this.

  Concerning

  Cap

  N ° as always do a backup in case the new version does not meet expectations. If you are happy stick with Yosemite.

• El Capitan crashes when watching the videos on QuickTime Player

  Hi all

  I faced a problem while watching the video on QuickTime Player. I'm not in streaming video. The video is in my SSD. Looking to halfway through my Mac suddenly freezes. I tried to press the touch Trackpad Force but nothing happens. The comments of tactics is absent. It's like the trackpad has been disabled. The screen is always on but the video is blocked right of the stage when my mac started to freeze. The sound of the video is still there. I tried to force the application to quit by using the keyboard shortcut, but nothing helps, it is not helped. The last resort, that I took is to press the power button for about 30-40 seconds before my mac stops completely. Can I know the reason behind this? And what steps should I take?

  Thank you.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter "BOOT_TIME" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the BOOT_TIME message that corresponds to the last boot time when you had the problem. Now, clear the search box to display all messages. Select those recorded before starting, during the time that something unusual was happening. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  For example, if the system is unresponsive or unable to stop for three minutes before you forced a reboot, post the timestamped messages within three minutes before the start time, not after. Please include the message BOOT_TIME at the end of the extract from newspaper - not at the beginning.

  If there is a long series of messages, please post only one example of each. Do not post of many repetitions of the same message.

  When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A crash report has a name that begins with the name of the process crashed and ends with ".crash". A report of panic has a name that begins with "Kernel" and ends with ".panic." A report of stall stop has a name ending with ".shutdownstall". Select the most recent of each, if any. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot. It is possible that none of these reports exist.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, there was a crash or panic, you can have selected diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  When did start?  I have the same problem for about 3 days.  I downloaded and applied update of OS X El Capitan 10.11.4 Combo, ran disk utility and ran disk first aid.  Have not had a problem since (touch wood because it is only since the mid morning today).

  

• Can annotate is no longer in the preview

  To take notes in class, I used to save PowerPoint slides in PDF format in the format '3 slides per page with notes.

  Previously, I had no problem opening the PDF file in preview and clicking on the lines that would automatically provide a text field for annotation and allow me to quickly start typing.

  In the last few days, I lost this feature. Now, if I click on the lines, a field appears but it is asymmetrical (skinny, long) and I can't type in it. My only option is to select a text box in the toolbar of the Markup, click and drag the text box on the line and start typing. It is not feasible to quickly take notes in class.

  Curiously, I lost the function slowly over the last few days. The problem arise randomly, I close and restart overview or re - create PDF of PowerPoint file and the service would be restored. But as of this afternoon, I can't return all original function. Even if I open a PDF file that worked previously, it still works.

  I know that this may be a little obscure. I tried searching for existing threads with this problem and find nothing. I hope someone has a few clues as to what is happening.

  Please, back up all data. Leave the preview runs.

  Hold down the option key and select go ▹ library in the Finder menu bar. In the library folder, delete the following, if they exist:

  Containers/com.apple.Preview

  Containers/com. Apple.QuickLook.UI.Helper

  Group Containers/com.apple.Preview

  Preferences/com.apple.Preview.LSSharedFileList.plist

  Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist

  State/com.apple.Preview.savedState request registered

  Sign out and then sign back in. Launch the application and test.

• turn off the preview pane

  Is it possible to completely disable the preview pane in the mail?

  Before moving to El Capitan, I could disable it manually whenever I started to Mail. Now, I can't find the option to do it again.

  Ideally, I would love to disable it completely, but even the old way to do everytime I open the Mail would be preferable.

  Thank you!

  jmmbbb wrote:

  Is it possible to completely disable the preview pane in the mail?

  Before moving to El Capitan, I could disable it manually whenever I started to Mail. Now, I can't find the option to do it again.

  Ideally, I would love to disable it completely, but even the old way to do everytime I open the Mail would be preferable.

  Thank you!

  Open Mail.  Go to Preferences-> look at one.  Click on "use the classic setup."  I've checked it because I like the preview pane of the message.

  

• How can I stretch/tilt a rectangular selection in the preview?

  Hi all

  Q: can you the proportions for a rectangular selection of cut-and - paste be unlocked?

  Formerly, in Snow Leopard 10.6.8 cut and paste a rectangular selection of an image in the preview has resulted a selection with eight points of click-and - drag: one at each corner and one on each side.  By clicking and dragging one of these licences stretching/tilt the value selected in any direction.

  Now, in the current version of El Capitan 10.11.3 preview, dragging these points only expands or collapses the selection and the aspect ratio is locked.  I have the impression I'm missing something very basic, but can't find any way to unlock the proportions for the selection in the drop-down menus or toolbars.

  A minor inconvenience, but boring, as the old function provided an extremely useful tool for making models quick and easy collage images that eventually became the graphic designs.

  Many thanks in advance,

  btambaschi

  MacBook Pro, OS X El Capitan (10.11.3)

  Always stretching works for me, the tilt doesn't.

• Reading of interlaced scaling BAD video in the preview of files 2015.3

  Hello, working in first Pro 2015.3 blow us up the size of the video to any value, say 110% (to exclude boom to the shot or other).  While we make (in ALL preview format - they all have the same defect).  During playback, we get bands chunky of a coarse comb effect where fields are of course spread over a fast movement.  It looks like old fashioned gross low resolution scaling.  Here is a screenshot of instant pause the playback view, it shows part of the image at 100% is to say 1:1 pixel to the screen:

  

  Then, we step forward (or rear of a framework to get the view full resolution according to the natures/parked frame display.)  Then, the effect of coarse comb went and we see the software displaying a reasonable interpretation:

  

  See how the striping is much better.  That's what you'd naturally expect to see reading all the courses in your sequence of rendering, because you have A) full playback resolution and B) you have actually rendered images for preview files (even choose the preview format that actually matches camera codec) or even a format Prores422 HQ.

  But now in 2015.3 in our normal workflow for many years, we can not be satisfied that our work is acceptable for broadcast because he plays today back this feverish comb coarse, crude effect.  So now we have to discount or ignore what we see and make a movie out and play this movie in reading software (Quicktime Player or MXF reader) just to see if it IS OK.  This means that any work of self-QC in first became useless.  This also means that we can make our work for customer insight and look with the first client.

  WHAT CAN WE DO?

  NOTE, HOWEVER, if we don't make a preview of a file and so native playback (DALYS-100) with yellow bars on top, it's all THE FINE - no gross comb effect - that is, it is exactly the same as the frame step full resolution/render!

  How can this be?  How can we better than quality render rendered Max reading UN-rendered file?

  We have even exported and then imported a rendered movie file and same that reads with the same effect of coarse comb despite this new film now playing at the 100% level.  While any player left 3rd he plays well - that you expect it to be.

  This is non-rendus with Instant playback pause playback:

  

  Here is the scale factor:

  

  Here is the view of the timeline:

  

  Here are the current settings of the sequence:

  

  This machine is a MacPro 24-core OS 10.9.5 with an ATI Radeon HD of Mo 5770 1024 card.

  Exactly the same problem that happens on our other new 6-core MacPro with graphic AMD over-pants 500 3072 MB on El Capitan card (these are the guys that started with this complaint, that they cannot trust their work).  Of course after color correction, effects and subtitles, most of our sequences MUST be made... until we need to do?

  Some have reverted back to 2015.2 where it is is not a problem. 

  Concerning

  I think that one of our in-house editors found a work around for this bug. Try adding a layer of setting on the video that is resized. This seems to fix deinterlacing problems when scaling of images.