Stop playing for hot spots

Similar Questions

• Video stops playing for no reason

  I do a banner that has several film clips, sharing the same area, creating Rainbow effects different when different areas (invisible buttons) are speckled on.

  First I could not understand if there was a way to have an invisible button over the entire surface that has changed to a different color effect with each mouse above (first mouse on black and white would change to the reds, second would change it to the blues, the third would change it Brown, etc..). Because I couldn't understand this, I settled on the creation of three buttons covering a third of the banner each, so when the mouse enters a button, it turns red, on another button it changes to the blues, in the third it at browns.

  The effects are video clips where each image has another band color change so it goes into effect of wave from one to the other and then back to white and black in the same way.  The first frame of each clip I had to turn in a nested movie clip, so I could turn the alpha to 0, because I was going to have these clips of film color effect over the other in the main scenario on different layers, and so you could see the effect, even if it was not this color layer on top. I used the same clip nested with zero alpha for the first frame of each clip color effect (red video clip, clip video blues, etc.), so I don't ' know if this is a problem.

  In any case, it seems to work correctly for a while, but after working on it for a little longer (and does not get more because I removed most of the changes I've done), now when I test the movie the mouse above doesn't seem to work properly. It works very well, apparently, for the first time I mouse over each button, but for that it work once again, that I have the mouse on the button twice and then it is paused at random during a part of the clip and I have to move my mouse over to the video to continue.

  I can't tell if it's because of video clips that overlap, or because my buttons are confusing, or if my actionscript is messed up, or if the timeline must be longer, or what. The timeline is currently 55 frames, identical to each video clip.

  I put a movieclip_instance.stop (); command of the first frame of the main timeline, is there a better way to do so? Should I put the stop command in the clip itself?

  Here is an article of my as in the scenario, it is my first time programming ever, in any language, and trying to learn from the internet is more difficult that I thought it would be.

  redmovie. Stop();

  red_btn.addEventListener (MouseEvent.ROLL_OVER, playRed);

  function playRed(event:MouseEvent):void

  {

  redmovie. Play();

  }

  I'm not sure what is the problem, so I don't know if this will help or not.  One thing I might suggest is that you use gotoAndPlay (1) instead of play().  In this way, if your movieclip is in the middle of play it won't continue, but will start from the beginning.

  You can use a button to have the different movieclips at play in order if you prefer that.  You just need some form of counter that keeps track of who is the next to play. Something like...

  var mcCounter:uint = 0; start at 0 because a table is used to identify what movieclip to play

  var mcs:Array = new Array (redmovie, bluemovie, brownmovie);

  only_btn.addEventListener (MouseEvent.ROLL_OVER, play);

  function playMC(event:MouseEvent):void

  {

  MCS [mcCounter]. Play();                  say the current mc to play

  mcCounter += 1;                            increment to the next mc

  if(mcCounter == 3) mcCounter = 0;  reset the counter if it exceeds the table

  }

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• Certificate for the hot spot ISE error

  We have just install an ISE Server (Version 1.3.0.876) and that you have set up a hot spot for guest users portal. Everything on the Portal works fine, however! The question that we run is, we installed a public cert signed by a public CA (Starfield CA), but when you can go to the EULA page on the ISE server, they get an error the path of certificate cert becomes not filled. I watch the cert that it gets, and the path contains only the issued cert, not the case there are on it. (I think that cert requests the browser to go to a site to download the latest public certification for the issued cert)

  I can work around this in order to allow this IP address he strikes in the ACL on the WLC, but I would simply like to have deliver ISE cert WITH public cases that's just in case the IP changes, or it is actually hitting a VIP and it comes to be responsive would be.

  Does anyone know how this is done?

  I tried the following:

  From the cert out of ISE, added public certification in the server certificate and added to the ISE, no luck. (I can this is done properly, let me know if this should have worked)

  Added the case public in ISE and self-confidence, no luck with either.

  Let me know! Thank you guys!

  Good job to fix the problem and for taking the time to post back here! (+ 5 from me).

  What is interesting is that the ISE should warn you and automatically restart the server when a new HTTPs certificate is installed. I wonder if this behavior may be changed with the last patch/version. In both cases, glad your problem is solved!

  Now, you must mark the thread as "answered" :)

• I have problem watching video on youtube it will start and play for 10 sec and stop

  When you try to watch a video on youtube or another network, it will start to play for about 10 to 45 sec and stop to let to memory buffer for hours custom go no where

  Click on the gear in the top right, symbol

  Point to security, and what is checked, uncheck the box
  Then click on internet options,
  Go to the Advanced section and check the box at the top of the page,
  Use rendering software instead of gpu rendering, apply and OK.
  Close and open a new window of ie9,
  Also make sure that your not using the 64-bit version of ie9, they are clearly identified and 64-bit operating system has two versions.

• Reading problem, when I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB

  When I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB, im using adobe production premium cs6

  Here is my card in my machine.

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: of 2.66 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 cache (per CPU): 4 MB

  Memory: 8 GB

  Bus speed: 1.33 GHz

  It is found on all projects, I'm still under snow leopard, I have a NVIDIA GeForce 7300 GT graphics card, and yes the playhead stops after a second reading of a video in the source and program window.

  After hours of research and troubleshooting, I managed to solve the problem by signing on the standard user and account logging in as an administrator. Somewhere in the standard user account prevents play video.

  I'll recreate a different standard user account and see if that fixes the problem.

  Thanks for your response

• Only plays for 1 second, then stops.

  CS6 11.0.1 with a Quadro 4000 using. I have about 50 stills from my calendar that are about 1 second. When I press play (or space bar), the playhead moves for about 1 second, then stops. I press the space bar again and he will play for a second (or less)... then stop. I tried to turn rendering CUDA off the coast, but the same problem.

  I also tried to disable the video and just play the audio track. The same problem. I turned off both audio and video and I get the same problem just play black! Same thing if I play a clip in the editing window.  It is not a problem of secure keyboard (I can play the SPACEBAR in AE CS6 & Quicktime Player very well)

  I made my calendar (it is all green). Why can't I play a little bit at a time?

  Try this.

  http://helpx.Adobe.com/Premiere-Pro/KB/playback-stops-loops-Soundbooth-premiere.html

• CS4 plays for the fraction of a second, stops

  I did a project in Premiere Pro CS4 on a Windows 7 computer, for starters. I imported more than 150 .mov files. I cut the movie together, everything worked like a charm.

  Then, I moved the project and source files to my new MacBook Pro (Snow Leopard 10.6.3 Core i5 2.53 ghz, 4 GB ram, etc.), and now I have this problem. When I hit a 'play' button anywhere in Premiere Pro, the video plays for a second or less and then stops, go back to the first image it has played. I tried to make new projects, import from different media, capturing media directly in Premiere Pro, nothing seems to have an effect on the problem.

  Does anyone else have this problem? Is there a resolution to this somewhere? Thanks in advance!

  Here is the solution.

  1. open Finder and navigate to/YOUR_HD/Library/Preferences

  2 rename or move the file to the Trash: com.apple.audio.AggregateDevices.plist

  3 restart the program

• Hot spot does not properly

  Here is a link to my file:

  Adobe Creative Cloud

  (Using the latest version of Adobe Edge CC)

  Please can someone tell me why my "hot spot" does not work in the attached file?

  By clicking on each of the small buttons open and close their respective balloons. A hot spot on the entire screen area should be clickable to close the speech bubble

  BUT

  In my file, the area above the "mode_count_bubble" is not clickable, even if the hotspot is in front of the image of speech bubble. The point hot clickable and works as expected if I click anywhere else on the screen.

  If I swap the order of 2 speech bubble symbols so that the "mode_count_bubble" is located in front of the "idle_tether_bubble" the problem stops during the bubble of County of mode and begins to bubble tie idle

  that is any symbol of speech bubble is originally, the hotspot stops working above the word bubble region

  Thanks for the help in advance

  OK, I got it fixed - I deleted the hotspots out of their balloons and created a single generic on the main stage. I then applied conditional code to close regardless of the speech bubble that happened to be open.

  Probably a little more simplified if I find myself with a lot of buttons and bubbles.

• Video stops playing after the transition

  I want to embed a video in a Keynote slide so that the video starts to play just after the slide in video. When I play the presentation and advance to the slide video, it plays for 1 second, then stops and the presentation falls back in design mode. I tried different video clips and they all do the same thing.

  The video is a MP4. I can integrate the same video into the Powerpoint presentation and it plays OK.

• Videos YouTube has stopped playing on V 37.0

  Running Firefox on Windows 7-64 bit 37.0. All the updates update. Flash is 17,0,0,134 and removes from the Adobe site.

  This afternoon of YouTube videos stopped playing. In the center of the image are circling points. The video seems to have loaded, as I can move the time slider and see images at different times, I'm not, just gives the circling 'loading' points. YouTube works fine in IE. Foxfire, if I go to other sites, such as news and videos/commercials play very well.

  I have disabled all add-ons, game Shockwave & Flash "always enable" and always YouTube videos will not play. Seem to download, simply cannot play.

  Thanks in advance for any help.

  Please also consider an add on for a work around to change HTML5 by default, however this should be fixed in the version of 37.0.1 are you still see this issue?

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• Flash video stops playing after 10-12 seconds

  Not sure when this started, but the videos now only play for about 10-12 seconds at a time. No crashes just breaks down, no errors, and it's only video. I can jump to another point in the video, and it stops after 10-12 seconds from there. I'm on the latest Firefox with the latest version of Flash. I tried to uninstall Flash using the Adobe uninstaller program. I reinstalled with 10.3, 11.2 and later even more once without success. I turned off hardware acceleration, no luck. I manually chose the resolution of the video, no luck. I started in safe mode and activated the plugin Flash, no luck. In any case have ideas?

  I tried the other two, but the Middle, I had not seen. In this page, I found that the HTML5 video play at all. So I checked my display drivers, and they have been of 2011. After their update that the problem is solved, thanks for the help.

• CD/DVD drive has stopped playing or only records

  I've only had this laptop a month and the player stopped play or record anything someone at - it a response for this

  Answer to? When you ask such a question to the best technician I think may not give you the right answer without check your machine and see what can be wrong with that.

  Sorry, but after reading this description of the problem in one sentence I would say just bring it to the service.

  If you want to have serious discussions here rent let us know which model of laptop you have.
  Did you test?
  Have you tried to clean the lens?

  You can use disk bootable? No matter what?

• Podcasts App suddenly stops playing

  Since the last major release of Podcsasts I was struggeling with her. Fortunetely some of its bugs have been fixed. Unfortunately for the most annoying bugs have not. Maybe I'm wrong with my opinion, but I really think that the main purpose of the application of Podcasts is to read podcasts, right? So why does he completely suddenly stop playing podcasts? the only thing that can be done is then open the app manually and click the comparable play hidden button and continue playing. The whole OS would not react on something else if you do not do this. It makes no sense to me and as I got this question all the time. My 4S on children 5 years to my at the 6ers, I'm not very confident to get afix it all soon.

  Another thing that probably his thad SDO is the sort that just make no sense for me. Most of the podacsts I listen to are programs that don't have not not be relistened to. I don't listen to anyone that I have when I have the time. However, the sort makes me always listen first to the most recent and not to the groin. I could easily live with this design error that I'm the only one in the world who uses Podcasts in this way (but I doubt at the same time). What makes me mad at her, is that playing the last podcast of this list, which is from my point of view on the other I need to listen to, will not jump to the next podcast when that is finished but just stops playing the list as if there where no more podcasts. But it is a. lot.

  Especially the two named bugs make a pain using podcasts. To be honest, it feels like not on the app developers use the application for more than to play half of the first test podcast they use. In addition, this behavior was intrduced with the new Podcasts app. The old version which has been replaced by a new version of IOS have the means to play the oldest to newest. and he was reliable playing. Compered to the old, the new version will be as of the first prototypes. It would have been okay, if the application would have improved over time. Maybe he has. I can only see it. I consider bugs because these great so they need to be fixed first to improve acceptance and satisfaction.

  Are there plans to fix these bugs or any tips that would help me to bypass?

  @mgollmick, I have no solutions to your questions but I wanted to add on your frustration about the application of Podcasts.  I started regularly using the Podcast app 6 months ago, and it has always been glitch in a multitude of ways:

  1. when I select a podcast, it won't often begin play immediately, regardless of whether I'm listening to a podcast already downloaded or via wifi.  Sometimes it will take 30 seconds to 1 minute before the podcast begins to play.  At other times, he won't play at all, and I have to close the app and re - manually open it (sometimes several times) until I can play a podcast.  I noticed that I do not suffer the same problem during access to downloaded podcasts offline (for example, during a hike).  This leads to believe that it is a problem of wifi, but I never experience lag issues when you access a music video Youtube or iCloud on my iPhone.

  2. when the list of "Unplayed Épisodes", I'm often impossible to remove (or there is a significant shift to delete) of podcast episodes in which I'm not interested.  I drag an individual podcast episode or click the 'Edit' button to remove podcast episodes, but more often that otherwise, I am unable to do.  Once again, I have to close the application and reopen it manually a couple of times before that I can delete episodes.

  3. the application of Podcast will often suddenly crash within 30 seconds of play an episode.   Sometimes it will crash after playing for an hour, even if I do not have set the sleep timer.   I have to open the app manually and click the 'Play '.

  4. There is often a long latency when trying manually updated list of "Unplayed Episodes.  Why I immediately see new videos for subscribed Youtube channels so I manually update the Youtube app, but it takes a minute or more to see a current list of new episodes of the podcast through Apple app?

  5. the iOS app also does not sync with iTunes on my Macbook or iMac:

  (a) iTunes does not reflect my order of podcasts that appear in "My Podcasts" on iOS.  I have manually re-ordered podcasts on iOS so that I can quickly access my favorite podcasts, but this reorganization does not appear in iTunes even after that I have to sync my phone with my iMac.  In addition, the left column of iTunes (with photos of each subscribed podcast nail) does not list podcast subscriptions in order alphabetical or any other rational means of organization.  It takes time to find a specific podcast under "My Podcasts) to access the episodes.  Why no iCloud synchronize?

  (b) "Unplayed Épisodes" iTunes version does not reflect the most recent episodes that appear on the Podcast app on my phone.   iTunes is about 24 hours of delay in the updates, and when I try to update iTunes manually, it does not work.  Also, I get a message that iTunes stopped updating a podcast special because I have not listened episodes recently.  Why iTunes does not recognize that I regularly listen to this podcast especially through the iOS app? Why this information is not automatically synchronize iTunes via iCloud?

  I've always been a fan of Apple products, and I understand when there are software problems from time to time, but to have so many important issues that impact, use of an application is beyond frustrating.   I understand now better Walt Mossberg recent Re / Code article criticizing Apple for not fixing not important issues with their own applications.  Although his article does not mention issues with Podcasts app, its purpose is also applicable.

  A very frustrated iPhone user.

  iPhone 6, iOS 9.2.1