stop running this script?

I get a message. "stop running this script? A script on this page slows down IE run slowly. If it continues to run, your computer may become unresponsive.

How can I identify and remove the script?

You can not. The script is on the Web page. If it gives you an option to stop it, do so.

Tags: Windows

Similar Questions

Message "stop running this script?

I get a message asking me to "stop running this script" when I go to Yahoo to check my mail. I never received that message before today and I used Yahoo so busy Explorer for years. I disable the filter XSS, but that did nothing. I ran Internet Explorer troubleshooting, but has nothing to do. How can I get rid of this message, because it prevents me from my mail or do anything on Yahoo?

It's a Yahoo! (Server/webmail) mail worldwide problem.
See: Internet Explorer problem? and this thread, etc.

Cordially.

Why I constantly get a message that says... "Stop running this script?"

I constantly get a pop of message asking me if I want to "stop running this script"... a script on this page slows down Internet Explorer runs slowly. It happens on Facebook, no matter what I do, be it games or on the FB homepage.

Follow this article http://support.microsoft.com/kb/175500

Kind regards

We continue message "stop running this Script" and our computer is slow

We are on facebook a lot and are now on the secure http, but it is slow and we still get a newsletter of windows that said Stop running this script? a script on this page slows down your web browser to run slowly

Hello

1 have you made changes to your computer recently?
2. are you Internet Explorer to access the Internet?
3. If so, what is the version of the operating system installed on your computer?

I suggest you follow the steps, if you use
Internet Explorer to access the Internet.

Follow the steps in the link and check if that helps.
Error message: "a script on this page slows down Internet Explorer runs slowly.

I hope this helps.

In facebook, I get a error message box asking to stop "running this script. I have to click Yes or it will damage my computer. How can I stop this "SCRIPT" and what is it?

I have an older browser. If I disable the compatibility mode, what would you do? Please, I beg you! What should I do to stop this script to run at facebook?

Hi Jacqueline,.

What browser do you use?

If you turn off your Internet Explorer compatibility view, some Web sites may appear to be blank or will not display correctly.

If you receive the error message in Internet Explorer, you can follow this link and check if the problem persists:

How to troubleshoot the script errors in Internet Explorer on Windows computers?

Hope the helps of information.

I keep getting messages "Stop running this Script?" who advise they are originally my web browser run slowly. How do I rectify this?

It is not a clear sign of the browser slows down. It does not seem to be limited to any Web site.

Sometimes, this problem is caused by an add-on that begins interacting with the page after most loads content, so you don't notice the problem until you get the message. Can the extension Skype Click-to-Call cause this problem.

In other cases, the problem may be caused by the content of the page.

If you find any model of the script that runs slowly, say Firefox? Script names that start with chrome: / / or resource: / / address either parts of Firefox or an extension. Starting with http:// or https:// usually script names are part of the site you visit.

For more information, you can try our technical support article: script is unresponsive warning - what it means and how to fix it.

Another good cause script errors is unresponsive on Windows Vista and newer is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

running this script each image

Hello
I want to run this script all the images, but I can't manage it...
This is my code
var req:URLRequest = new URLRequest ("assets/images /" + currentFrame.toString () + ".jpg");
var loader: Loader = new Loader();
function imageLoaded(event:Event):void {addChild (loader) ;}
loader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);
Loader.Load (req);
I want to load a new external image on each new image, but now runs the code only on the first image...

After the first picture, you can use:

Req.URL="Assets/images/' + currentFrame.toString () +".jpg ".

Loader.Load (req);

PS you should have a stop() in this first image and a way to navigate that does not exceed a framework until the loading is complete.

can anyone run this script?

Hi all
in order to proceed to a reconfiguration of the alarm, I need to get metricId of an alarm by default,
the problem is, then from a previous test I accidentally deleted some of these alert, so I have to manually recreate but I can't find the metricId that match.
So, in order to help me, can someone run this script:
$Name = "unable to connect to the storage.
$alarmMgr = get-view AlarmManager
$alarms = $alarmMgr.GetAlarm ($null)
$alarms | %{
$alarm = get-view $_
If ($alarm.Info.Name - eq $Name) {}
"Write-Host-object' * $alarm.Info.Name:"-nonewline
Write to $alarm.Info.Name
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.CounterId:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric.CounterId
Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.Instance:"-nonewline
Write $alarm.Info.Expression.Expression [0]. Metric.Instance
}
}
First of all, as is the case, a second time with $Name = "host error.
and one last time with $Name = 'high-availability Cluster error. "
The result of these commands will help me a lot to get my alarm
Thanks in advance to anyone who can help me

Here you go (host)

and (cluster HA)

____________

Blog: LucD notes

Twitter: lucd22

Getting the name of the Action that runs this script

If I create an action in photoshop to run a script named "test script", how can determine within the "test script" what name of the action started to run this script? I am writing a script to resize my images. The scale will be determined by what Action ran this script.
Example of
Action names are 5 x 7, 4 x 6, 8 x 10
Reproduced above action will run the same script, called "scale me."
In "scale me ', the java code will determine that 4 x 6 started running" scale me. "
"Level I" will go to the section in the java code to the scale of the image loaded into Photoshop for a 4 x 6 size.
The reason for writing the code "scale me" in this way, is that I can keep only one script to resize my images.
Any suggestion or help would be appreciated.
Raymond

I don't know of all average direct to determine the name of the action that began a script. You can find the name of the action highlighted / selected with this code.
```
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Actn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
var desc = executeActionGet(ref);
var actionName = desc.getString( charIDToTypeID("Nm  ") );
var actionSetName = desc.getString( charIDToTypeID("PrNm") );
alert( 'Current selected action is: '+actionName+'\rin the action set: '+actionSetName );
```
But it is not infallible.

A better solution would be to set up your script to make it recordable action. The details are in the script as "JavaScript"resource guide. It you have that in place any action that registers the script you will store the values used. When the action is played again once you get these the app.playbackParameters calues. Image and layers of export files are two Adobe scripts that use a javascriptresource section.

How to run this script on all my hosts at the same time?

Greetings. I have this script that tells me that the status of the HBA device path (dead, active). But it takes forever to run on all my guests, as it does every one host at a time.
How can I get that it is running on all hosts at the same time?
Use: Get-HBAPathStatus VMHosts *.
Thank you!
Function Get-HBAPathStatus ($InputVMHost) {}
$vmhosts = get-VMHost $InputVMHost | Name sort
{foreach ($vmhost to $vmhosts)
Write-Host "* $vmhost."
Write-Host "Please wait...". Checking the paths... »
$hbas = get-VMHostHba - VMhost $vmhost
$pathStatus = $true
{foreach ($hba to $hbas)
$scsiluns = get-ScsiLun - Hba $hba
{foreach ($scsilun to $scsiluns)
If ($scsilun - not $null) {}
$paths = get-ScsiLunPath - ScsiLun $scsilun
{foreach ($path in $paths)
Write-Host - NoNewline ". »
if($Path.) State - eq 'Dead') {}
$pathStatus = $false
}
}
}
}
}
{if ($pathStatus)}
Write-Host "
Write-Host "$vmhost is ok" - ForegroundColor "green".
}
else {}
Write-Host "
Write-Host "$vmhost death paths." - ForegroundColor 'red '.
}
}
}

Be sure to use the 32-bit version of PowerShell and PowerCLI with the Start-Job cmdlet.

Labour will fail with the 64-bit version.

See the thread disable asynchronous paths for more information.

I am still getting script errors, it says inside you still want to run this script error page yes or not I click No.

I always get script errors on the bottom it says you want to keep running on this page scripts Yes or not I click No.

Hello

1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?
3. What is the accurate and complete error message the script?

If you get the script at startup error then try to perform the clean boot on the computer.

From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:
http://support.Microsoft.com/kb/555375

When I run this script in CS4 it does not work please give solution

#target photoshop
 
var doc = app.activeDocument;
 
var docW = doc.width;
var docH = doc.height;
 
if (docW == docH && docW > 800) {
     
     switch(Math.floor(docW/500)) {
          
          case 5 : doc.resizeImage(2500,undefined,undefined,ResampleMethod.BICUBICSMOOTHER); break;
          case 4 : doc.resizeImage(2000,undefined,undefined,ResampleMethod.BICUBICSMOOTHER); break;
          case 3 : doc.resizeImage(1500,undefined,undefined,ResampleMethod.BICUBICSMOOTHER); break;
          case 2 : doc.resizeImage(1000,undefined,undefined,ResampleMethod.BICUBICSMOOTHER); break;
          case 1 : doc.resizeImage(800,undefined,undefined,ResampleMethod.BICUBICSMOOTHER); break;
          default : doc.resizeImage(3000,undefined,undefined,ResampleMethod.BICUBICSMOOTHER);
          
     }
     
}

In this sript if you set the units of the rule in pixels as noted the script should resize images that are square and have a size of 800 px or higher at 800 x 800, 1000 x 1000, 1500 x 1500, 2000 x 2000, 2500 x 2500, or 30000 x 30000 all other images will remain as they are, that are not square and square more small then 800 pixels.

What will happen to this script if there is no interruption?

Friends,

OS: RHEL AS 3
DB: 9iR2 (9.2.0.4)

I know RMAN is advised but... we use the user managed backup.

It's our managed user backup. I manually run this script for the last 3 years with no problems.
I'm now automate this script by passing through crontab.
now my question is... when executing this script if there is no interruption of any cause or by sudden break or disconnect sudden or any other...
What happens to this script? to corrupt my db?
If any interruption happens what should I do?

alter tablespace system begin backup;
host cp /u01/app/oracle/oradata/test/system01.dbf /u02/online_backup
alter tablespace system end backup;

alter tablespace undotbs1 begin backup;
host cp /u01/app/oracle/oradata/test/undotbs01.dbf /u02/online_backup
alter tablespace undotbs1 end backup;

alter tablespace CWMLITE begin backup;
host cp /u01/app/oracle/oradata/test/cwmlite01.dbf /u02/online_backup
alter tablespace CWMLITE end backup;

alter tablespace DRSYS begin backup;
host cp /u01/app/oracle/oradata/test/drsys01.dbf /u02/online_backup
alter tablespace DRSYS end backup;

alter tablespace INDX begin backup;
host cp /u01/app/oracle/oradata/test/indx01.dbf /u02/online_backup
alter tablespace INDX end backup;

alter tablespace test_DEFAULT begin backup;
host cp /u01/app/oracle/oradata/test/test_DEFAULT.dbf /u02/online_backup
alter tablespace test_DEFAULT end backup;

alter tablespace ODM begin backup;
host cp /u01/app/oracle/oradata/test/odm01.dbf /u02/online_backup
alter tablespace ODM end backup;

alter tablespace TOOLS begin backup;
host cp /u01/app/oracle/oradata/test/tools01.dbf /u02/online_backup
alter tablespace TOOLS end backup;

alter tablespace USERS begin backup;
host cp /u01/app/oracle/oradata/test/users01.dbf /u02/online_backup
alter tablespace USERS end backup;

alter tablespace XDB begin backup;
host cp /u01/app/oracle/oradata/test/xdb01.dbf /u02/online_backup
alter tablespace XDB end backup;

alter system switch logfile;

Thank you

for running this script if there is no interruption by any cause is by > sudden force or disconnecting sudden or any other...
What happens to this script? to corrupt my db?
If any interruption happens what should I do?

If there is power failure there is possibility that your data files may be corrupted.

If it happens during the backup operation and assuming that the file did not get corrupted, you can open without any problems

But you must check the State of the data file before the opening of the DB. IF none of the tablespace in backup mode Begin you must mount the database and issue the command end backup

Then your DB will come back

The script has nothing to do with corruption on the frame.

If you have files in backup mode you will not be able to open the DB

A simple demo

A simple could help you what happens if there is a stop in the waiver of the script

SQL> alter tablespace users begin backup;

Tablespace altered.

SQL> host ocopy D:\ORACLE\ORADATA\RMAN\RMAN\USERS01.DBF D:\ORACLE\ORADATA\RMAN\RMAN

SQL>  host ocopy D:\ORACLE\ORADATA\RMAN\RMAN\USERS01.DBF D:\ORACLE\ORADATA\RMAN

SQL> conn sys/sgdf@rman as sysdba
Connected.
SQL> shutdown immediate
ORA-01149: cannot shutdown - file 4 has online backup set
ORA-01110: data file 4: 'D:\ORACLE\ORADATA\RMAN\RMAN\USERS01.DBF'

*here i have shutdow the database from windows services while the tablesapce is in backup mode*

ORA-12571: TNS:packet writer failure
SQL>  conn sys/sgdf@rman as sysdba
ERROR:
ORA-12518: TNS:listener could not hand off client connection

SQL> startup

SQL> conn sys/sgdf@rman as sysdba
Connected.
SQL> select name from v$database;

NAME
---------------------------
RMAN

SQL> select count(*) from dba_objects;
select count(*) from dba_objects
                     *
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only

SQL> SELECT * FROM V$BACKUP WHERE STATUS = 'ACTIVE';

     FILE# STATUS                                                    CHANGE#
---------- ------------------------------------------------------ ----------
TIME
----------
         4 ACTIVE                                                    1395431
09-15-2008

SQL> alter tablespace users end backup;

Tablespace altered.

SQL> alter database open;

Database altered.

So if the underlying file has been corrupted, then you must restore backup valid that's all

Published by: Maran Viswarayar Sep 15, 2008 18:50
Added the simple demo

Published by: Maran Viswarayar Sep 15, 2008 18:53

Running a script from .plb

I use Oracle Database 10 g. I create a function in the hr schema and wrapped it. I can run this file to film in this scheme successfully. But I want to run this script in a different schema. I tried to run this encapsulated file (.plb) in the scott schema. But can not create this function. It gives an error like this-' ORA-01435: user does not exist. "Can I use this schema to another? If so, please someone provide me the way.

MD. ROUMANE wrote:

I use Oracle Database 10 g. I create a function in the hr schema and wrapped it. I can run this file to film in this scheme successfully. But I want to run this script in a different schema. I tried to run this encapsulated file (.plb) in the scott schema. But can not create this function. It gives an error like this-' ORA-01435: user does not exist. "Can I use this schema to another? If so, please someone provide me the way.

Hello Joe,

ORA-01435: user does not exist

means that you USER_NAME. Function_name in the encapsulated file (.plb).

First no wrapped up and remove the user name and re-packed and try.

Hamid.

Run the script in local path calc

@Hi all,
We have a requirement in which an a certain application calc script is run to clear data. The data to be erased (months) are mentioned in a file that we receive the ETL.
The mechanism is so that, from workday1 up to Workday4, we have a clear current and previous months and workday5 until the rest days, delete us the data of the current month.
We were doing this manually so far and we need to automate the process. We used VBScript to read the contents of the file that is sent by ETL and change the script to calc.
But the problem is the calc script which is getting changed is present in the local system and not on the application server.
Please suggest some options where I can call the calc updated the script locally and executed him from maxl.
Appreciate any help on this!

Hello Sadhana,

When you create a calc script VB logic on the local computer, then you can probably develop it a little and write a MaxL script with the calculation inside. Then you can run this script on your local computer where MaxL has been installed.

Kind regards

Philip Hulsebosch

stop running this script?

Similar Questions

Maybe you are looking for