stop the database when the HOT backup running

Similar Questions

• Where is the official Oracle documentation that describes the hot backup?

  I used the cruelly utility failure to search for Metalink and Google, but the closest thing, I found is a description on "ask Tom".
  
  I'm looking for official Oracle documentation that describes what is happening internally during a hot backup. There are many websites and blogs out there that describe, but I'm looking for a description of Oracle themselves. The only things I found in the Oracle documentation until now is to know how to start and stop the hot backup, but not what is happening internally. GR 11, 2 preference if it made a difference.
  
  Thanks in advance.

  Hello;

  Its probably gone RMAN covers this.

  The closest would be:

  Backup and recovery reference 11g Release 2 (11.2) E10643-06

  Or

  Backup and recovery User Guide 11 g Release 2 (11.2) E10642-05

  See Chapter 8 - Concepts of backup RMAN - online backups and backup Mode

  Best regards

  mseberg

• excluding tablespace in the hot backup

  Hi master,
  
  I use oracle 10g on linux. We use the hot backup to date strategy to back up the database.
  
  
  but I think that I support too much data. I now have tablespeces in my database
  
  System
  users
  Temp
  Cancel
  index
  perfstat
  blob1
  tool
  etc. and default tablespace installed by oracle at installation time.
  
  I can I exclude some of the hot backup table spaces so that it consumes less time to back up the database?
  
  
  can I exclude spaces of temp, perstat and tool table?
  
  It will cause no impact on the database and?
  
  Thanks and greetings
  VD

  DON'T think to drop your UNDO tablespace. You use it to save "in front of your block images.
  Re: cancel

• The hot backup process

  Hello
  
  I have a Dev on Oracle 10 g (10.2.0.3 on Solaris 8) db, for which I want to set up a simple backup process hot. My question is: for simplicity, instead of putting each tablespace in backup mode and to take it out of backup mode, can I put the entire db in backup mode and copy the data files and control and take the Pb of backup mode:
  
  -J' my intention to do so hours offline when activities are lower and db is small and there is enough space to make it so again is generated (compared to each tablespace in backup mode) that this is acceptable. Thus, the following process is valid:
  
  (1) connecting to the db as sys
  (2) alter database begin backup
  (3) copy all of the files and control the db for the backup
  (4) change the backup of the end
  - or after it is necessary to issue the - modify the statement of system switch logfile also? -If so, what is the purpose of this statement?
  
  Also another question is: I don't have enough space on the db server hosting backups so after you put the db in backup mode, I transfer the file in Microsoft windows server for solaris. -Is possible with rman?
  The reason why I go to managed user backup, of rman is that we do not store the backup on the db Server nor we have any tape, but we have a windows machine that can be used to store backups. so in this case, is it possible that rman can be used?
  
  Thank you very much
  Cedric

  When you use RMAN, you don't have to put a tablespace (or database) in BACKUP Mode.

  With RMAN, you can create of BACKUPSETs, in this case, backups can be smaller than the actual database files as RMAN does not save the blocks that have never been used (that is to say, the blocks above the last measure in a data file). In addition, you can create AS COMPRESS in order to introduce more compression.
  Alternatively, you can creat backup as Copy, in which case backups are the same size as the data files that you might have with scripted backups (UserManaged).

  You MUST run your database in ArchiveLog mode.
  You MUST save each ArchiveLog.
  You must save your controlfiles as backup controlfile separate. However, even if you do not configure CONTROLFILE AUTOBACKUP ON, whenever you back up the SYSTEM Tablespace (that I advice every day), the controlfile is going to get backed up in the same backup set. For added convenience, I prefer controlfiles backup as separate backups so that they save files are easily identifiable.

• switch after the hot backup log file

  Hello world
  Why should we change log file after the end of the backup command that is to say, after the end of the backup hot?
  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  If you're doing a cold backup, this is where you use cp.

  But when the database is in place, controlfile is used and it is continuing to change the oracle process. Now the question is how to get the consistent image of the controlfile, here's where you their support at the database level (for example backup controlfile). When you do that level database, a snapshot file is created time and she is saved.

  HTH

• How to restart and stop the system by running a batch file?

  Can any body give the command batch file for restart and stop of the system.

  My requirement is to reboot or shut down the system at a specific time. So I think that by creating a batch file, that I can schedule the file to run at a specific time of the scheduled task...
  With regard to:
  Rahma.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on MSDN. Please post your question in the MSDN forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories

• cRIO: error 7 to read Volume information: I want him to stop the code to run does not appear a dialog box

  Hi, I have the following code which stops when a multibordure error.

  But in the case of "Error 7", the code instead of stop, shows a dialogue with 'Continue' botton illustrated in the following figure.

  I was wondering how I can change the code in a way that "Error 7" would have done stop the race continues to process does not open a dialogue with botton. In addition, I have the simple error handler at the end of the code.

  

  //////////////////////////////////////////////////

  

  ////////////////////////////////////

  

  ////////////////////////////////

  

  The simple error handler is what triggers the dialog box.  Read the help file on this function.

  If you want to stop based on a mistake, ungroup the cluster of error for status and the wire in the terminal stop ORing with everything cause normally your loop to stop.

• Paramerterized interactive reports - is there a quick fix to stop the query to run when the page is entered before user by clicking OK.

  Example of

  Currently, when the user enters the page interactive report runs (unless the user hitting ' go') and - does no data found because one "parameterized" field is required and the sql is not set to NULL values.

  I'm looking for a way to not run a query at all -until the user hits go for the first time on the page - each time that they re - enter the page in the same session, it would be OK to auto submit the query.

  I believe that I can install a hidden item and check on my interactive report E1 not null.  Then create a 'calculation' on 'after bid"that would set this value to a value - say 1.

  I can't seem to be able to get this to work however.

  In my interactive report - I wonder what 'type condition' should I use.  Any thoughts would be greatly appreciated.

  You have two regions, research and order Type. You have items in the two regions. However, I think you are talking about the area "Search" when you say 2 parameters.

  If you want to just display IR when the user clicks on 'Go' or click on 'Go' earlier in the same session, then I suggest,

  • Create a new item of the hidden page, P6_SHOW_IR
  • Create page process that runs when the user clicks on the button 'Go '. Here to update the value of P6_SHOW_IR 'Y '.
  • Create a branch that connects to the same page with "State of Session saving" checked (connections conditional, when click on the button "Go")
  • Set "Conditions" for the region of infrared, so it displays only when the value of the P6_SHOW_IR element is Y

  Kind regards

  Hari

• Why the selection of 'never activate' in the menu 'tools' does not stop the Acrobat Flash running when selected?

  When the option 'request to activate'-'You Tube' blocks Flash from Adobe, but 'request to activate' is no longer on Yahoo Home Page
  appear (to DATE). When I chose 'never activate', even the car of You Tube active!

  Also, I noticed there is an add-on special to control the Adobe Flash Player. Why is there a special module where it can be controlled from the designations of add-on "Tools"? What has changed since the last version of Firefox has been installed
  on January 17. With the Adobe Flash has major problems, it's an extremely serious problem.

  It is not the computer. Nothing has changed on the computer other than the latest version of Firefox being installed.

  ANY SUGGESTIONS WILL BE APPRECIATED.

  I checked the State once more, and since I returned to the "application activation", I'm going to is no longer the problem mentioned above on Yahoo.

  I've reconfigured one of the addresses on Yahoo, and all of a sudden, everything is back to its previous state. My apologies for the assistance requested (perhaps) premature.

• Stop the App from running in the background

  Hi all

  Anyone know how to stop an application from running in the background when you press the END key?

  Normally, if the user has pressed the end key the app will will then in the background but not stop running.

  Thanks in advance

  guys I solved this problem using the method the Application getProcessId()

  Thanks for your response

• How to stop the task that runs forever...

  Hello
  I created a procedure with the following code. Using dbms_scheduler I created a single job and called this program. This work is in mode "sleep" for a long time. How can I stop this work.
  
  create or replace procedure bpc_test_batch
  is
  Start
  DBMS_LOCK (30000000)
  end;
  
  
  Kind regards
  Thiru

  Have you tried this already?

  exec dbms_scheduler.stop_job('Your_Job_Name',true);
  

• Qosmio G30-153 stops and restarts when you try to run programs and games

  I bought inscribed in the computer of 22 days ago. After 4 days of work without problem the laptop started to plant a blue screen, mainly with the "MEMORY_MANAGEMENT" error

  Very often when you try to play a 3D game or using any program (internet browser, file manager or almost). As the Blue error screen is essential to the system, the computer restarts by itself, but even more often an (specific to the program or to a standard error window

  Windows "(nous sommes désolés, mais le programme doit mettre fin à cause de l'erreur...-une erreur principalement dans certains fichiers.dll dans le répertoire Windows) appears disabled to continue the work on the program until you restart manually."

  I restored the system once already - it did not help, I also downloaded the latest drivers, including upgrading the Bios.

  What can be wrong, I have no idea. Help, please...

  Hello

  Can you please tell us what games you have preinstalled and programs? Description of your problem is quite general and it is not possible to have any concrete indication that may be the problem. For some time, I have G30 and operating system runs very stable with standard applications such as Microsoft Office, Skype, Icq, MSN messenger and IE7 with LAN and WLAN connection.

  Up to now, I really didn't notice any problem. Because of this, I really want to know what programs you're using.

• A development database hot backup

  RDBMS version: 10.2.0.4
  Operating system: Solaris 5.10
  
  One of our development database is in NOARCHIVELOG mode, and we want to keep it this way. Every Sunday, we want to make a complete this DB RMAN backup. Since developers (WE, India, China) could be working from home on Sunday and need to connect to the DB, we cannot stop this DB. I think to create a hot RMAN backup script that will be

  1. Place the DB in ARCHIVELOG mode temporarily
  2. Startup (OPEN) the DB and Take a FULL BACKUP including the archive logs with a script
   run {
   allocate channel m1 TYPE DISK connect 'sys/fls'  FORMAT   '/u05/rbkp/ptcp_%U.rmb';
   backup as compressed backupset database tag 'full'  plus archivelog; 
  }
  
  3. After the Hot backup is done, the shell script should place the DB in MOUNT stage and revert back to NOARCHIVELOG mode   and startup

  The RMAN full backup taken using the strategy above held for restoration and recovery?
  
  I can't put the commands for the placement of the DB in ARCHIVELOG mode in the RMAN run block. I can?

  You have a valid backup, but you will not be able to perform a FULL restore. You said that you will return noarchivelog mode after the backup. When your database requires recovery of the media in this mode, you will have more often a gap between the last saved archivelog and real online newspaper. If you can only make one point incomplete recovery - until the last archivelog available in the backupset.

  Werner

• Can not stop the agent

  Hi all
  
  I recently updated two databases on a unix machine, who share the same oracle 10.2.0.4 is home of 10.2.0.1. After improvement, the status of the agent and the listener became "Unavailable", the database instance is also down in the grid control (I can access databases of command-line, however).
  
  At the command prompt when I do
  
  agent of $ emctl status
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  
  --------------------------------------------------------------------------------
  Date: Wednesday, October 8, 2008 15:32:18 GMT
  Server: Apache/2.2.8 (Unix)
  Allow: GET, HEAD, POST, OPTIONS, TRACE
  Content-Length: 287
  Connection: close
  Content-Type: text/html; charset = iso-8859-1
  
  
  --------------------------------------------------------------------------------
  Agent runs but not ready
  
  I tried to stop the agent and run again, when I
  
  stop agent emctl $
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  Agent... failed to stop.
  
  Anyone has an idea about this?
  
  concerning
  Sunny boy

  MetaLink notes 549896.1 and 278100.1 did not work for me, but a combination of things in there with the help of the support only.

  Remember that there are no errors in your application of patches.

• Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

  Original title: Windows Update stopped working Vista Home Basic.

  HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

  Hello

  Question: Windows Update has stopped working

  1. do you get an error message when you try to update?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems with the installation of updates (Windows Vista)

  Question: display Error Code 43 adapter has stopped the unit

  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows (Fixit)

  Hope this information helps.