stop the loop only in certain layers

Similar Questions

• lets stop the loop parralle notification

  Hello

  Everyone

  I created several loops producer/connsumer.

  A loop producer is business event that hold value control change of FP and then send queue consumer loop (solenoid)

  The other separate producer loop is to NEITHER 9213 display Temp data, I use another loop of consumer to acquire the data of NI9213

  I don't know if I can use notification to stop the two pairs of earrings.

  I hope that when I click on stop the whole process in PF button, then, the True value is sent to the notification. The NI 9213 producer loop then get this message to stop the loop. Now, stop process only control solenoid buttonhole since this button is in the structure of the event.

  I tried the notification. When I put wait notification NI 9213 looping, this loopkeep wait any notification and doesnot monitor temporary data

  Thank you

  
  

• goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  You use a Mac, or you're on another platform?

  Any other use of platforms:

  • Mac: Firefox > Preferences
  • Linux: Edit > Preferences
  • Windows: Firefox > Options

  Press F10, if the menu bar is hidden under Windows and Linux, or use "> Firefox Options/preferences.

  • http://KB.mozillazine.org/File_types_and_download_actions
  • https://support.Mozilla.org/KB/managing+file+types

• Stop the loop in the process

  Hello

  Once, I am for another question, desire to learn more about labview and these countless obscure secrets.

  Well my problem seem is a common problem, but I have not found the answer in other topics.
  Here are the levels of my (simpler if you look directly at VI) VI

  1st level, I have an event to bring the action or return to the main Vi
  level 2 (during the measurement process), I have an loo whilep with an event case inside to stop the loop if the process is blocked. but it does not work.

  And to make matters worse I can't press the keys at the start of the measure

  I'm on this problem for 10 hours is not a question asked without thinking, but I am really stuck.

  Thank you

  Firstly, stacking of the structures of the event is going to be tricky, very quickly, so I want to disencourage to do until you are an experienced developer of LV. You are currently a little diving on the "first numbers", which is generally understood as the warnings from the structure of the event.

  The second thing is that I understand that you want to terminate the wait function itself (which represents your external code). This can be done. The reason is simple: LV is just waiting for the code complete. So saying LV to stop his execution will happen as soon as LV "took over". This will happen once the external code is complete.

  You CAN complete the thread using the Windows API, but you should / must restart the entire application of the LV to prevent corruption of memory created by the son put to death (not recommended).

  hope this helps,

  Norbert

• How can Windows movie maker, I stop the music to a certain clip and not replay

  How can Windows movie maker, I stop the music, play a certain clip and not play again?

  1. Add the video file.

  2. on the home tab use Add music to add music to the full clip.

  3 move the vertical slider on the film to where you want the music to stop.

  4. on the Edit tab, select Split.

  5. now, using mouse cursor select just the audio running along the top of the video AFTER your split point.

  6. press delete on your keyboard.

  You could also do it by reducing the volume of the section of audio after the split to zero.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• stop the loop inside while loop

  Hi all

  Is there a way to stop a loop within a while loop? Error-free program will stop running when you press the stop button, but I want to while loop continues to run in and only for the loop stops when the condition is met.

  Thank you!

  Hi TayAus 1.

  If you want to run the execution once? Maybe something like below? The code inside the structure of events can only run when the event source is triggered. For example, the code in the digital works only when it detects a change in the numerical value (just an example).

  

  When the button is selected, it should raise the event to stop as shown below:

  

  If you want to create the event source, create the structure of the event > right-click on the frame and select edit events dealing with this... > This should open Edit events.

  The example below is that I put the event source for the change in the value of x and x 2.

  

  So when x or x 2 value is changed, executes the code in the sous-schema event shown below.

  

  Warm greetings,

  Lennard.C

• Missing elements only on certain layers, only on certain pages, Ghost - CS6 INDD

  Items on certain layers, only on certain pages, disappeared while I was working on other pages in the document.

  • The layers Panel expands to show that there are several elements on the page, but elements (text boxes and a chart area) does not visibly show up on the page. Yes, I have reviewed the "layer options" - this isn't the problem
  • I'm not able to choose them, even when the file is a visible layers. Yes, shows the symbol of the eye. These issues all come while each layer is 'on' - so it's not the problem.
  • Only 2 of the 14 layers are made... and just over 10 pages (about 308), although not all the elements on these 2 layers disappeared on these 10 pages, there are a few anomalies that has not disappeared
    
  • If I stick a new element in another layer, while the box is checked I can move in my "layer of problem" and the form will visibly disappear (although always register as something existing in the layers panel). As long as I do not deselect, I can move it to another layer using the layers panel, and he re - appears. If I deselect the, I can not select the question again using the selection tool or layers panel again, but it still shows that the element exists in the layers panel. I have not found a way to deal with these elements 'Phantom' again. S.O.S.!

  I've never seen this problem before. At 3 other designers see it to confirm that I wasn't crazy. They never saw coming forward either.

  Working on a project to design complex book... I mean here on 2200K + links images, 308 pages, 40 + master pages and 14 active layers.

  Would love to no explanation for this software error.

  I wish l could explain it's "human error" but I have not worked on these affected pages today. I noticed missing items when I went to review the chapter. I worked in the file all day today... and it is very disturbing: I printed these performed 10 pages late yesterday afternoon. I went to retrieve this file in time Machiene, but my backup file also had the same problem of 'ghost elements' (even if it backed up once I have printed, and the impressions were very good). I had to go all the way back to file on Monday, which was pre-re-design of these pages.

  I use InDesign for 8 years and have never encountered a problem like this before. I hope that someone out there!

  -Bree

  Is there any other object in front of him, maybe - a large empty frame filled with perhaps paper? If this isn't the case, I would say that there is probably some kind of file corruption and I save a copy in the current state as backup, and then export to .idml to see if you can clean it. See remove minor corruption by exporting

  You should probably also do a Select All on the page and see if you see single-point stray objects or other objects that you do not (at the time on the screen of the page or in the layers panel). I saw maybe three cases in 8 or 9 years of single point objects with a fill assigned which caused all sorts of behavior strnge. I never managed to create on these intentionally, however.

• How do I stop the animation to a certain slice?

  Well, as the title suggests, how can I stop my animtation to a certain range. Is it only possible cause implementation of a timer, or also can enter a code that stops at a certain range?

  And when I stop the animation, my buttons will always be able to get clicked?

  Greetings,

  Coyke

  Well, as the title suggests, how can I stop my animtation to a certain range. Is it only possible cause implementation of a timer, or also can enter a code that stops at a certain range?

  Here's what to do in general:

  addEventListener(Event.ENTER_FRAME, onEnterFrame);
  
  function onEnterFrame(e:Event):void {
       if (currentFrame == 200) stop();
  }
  

  And when I stop the animation, my buttons will always be able to get clicked?

  If the button is on stage on the frame - it will be available to the interactions.

• Stop the loops with a button

  I have an infinite loop is and display of data. How can I end the loop with a button or a keypress?

  Periodically perform a ProcessSystemEvents() call inside the loop. In a reminder of the STOP button, set a flag to indicate your loop to stop.

  stop unsigned int = 0;

  While (! stop) {}

  data getmeasured

  display the data

  ProcessSytemEvents()

  Sleep (250);   to be polite: it is impolite to spinlock, since you will monopolize the CPU and other threads can get hungry

  }

  then, in the reminder for a STOP button

  STOP the button callback routine

  stop = 1;

• How can I stop the looping SOUND?

  Newbie here.
  
  I created a movie that makes a loop at the end of the last image. I have a built-in Sountrack'u which exceeds the sum of the last frame of the movie. When initially film loops, another copy of the audio clip starts playing on top of the initial melody (MP3). How can I stop the audio clip to restart when the movie back surrounds? I want just the 1st copy of the sound at the end and STOPS when the fact... or restart... I don't want it to start on top of itself...

  Cody21,

  > How can I stop the audio clip to restart when
  > the movie back surrounds? I want just the 1st copy
  > the sound at the end and STOPS when the fact... or restart
  > .... I don't want it to start on top of itself...

  Well, the sound is positioned in frame 1, probably, no? During the
  playhead enters frame 1, the sound goes off again. There are a number
  ways to configure your sound. Two basic methods are events and streams, which
  You can see the area of synchronization of the property inspector when you select the
  the frame that contains the sound. Event means that the audio load in memory all the
  at the same time and plays; Stream means that it has locked in step with the timeline.
  Stream means it does not start on top of itself - but it also means that audio
  stop when the timeline does.

  If your audio starts an image 1, I could see Adding a quick
  action gotoAndPlay (2) in the last frame of your timeline. Who would jump
  the playhead spent Framework 1.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• I want to stop the loop button shape 10g

  I want to stop a loop in the forms of pushbutton 10g it's like (SwingWorker() in java) (DoEvent() in .net)
  The problem in forms 10g that when you start a loop shape freezes and you are unable to broadcast any button on the form, I found the solution for this in form 6i by package d2kwutil * WIN_API_UTILITY. InterruptCheck (hButton) *.
  But in 10g I can't find a solution, Please help > > > > >
  
  
  declare
  hButton PLS_INTEGER;
  Start
  : interruptcheck.counter: = 0;
  hButton: = get_item_property('INTERRUPTCHECK.) PB_OFF', WINDOW_HANDLE);
  go_item ('interruptcheck.loopcount');
  set_item_property('INTERRUPTCHECK.) PB_OFF', ENABLED, PROPERTY_TRUE);
  set_item_property('INTERRUPTCHECK.) PB', ENABLED, PROPERTY_FALSE);
  set_application_property (CURSOR_STYLE, 'HELP');
  set_application_property (CURSOR_STYLE, 'WAIT < d2kwut60 >');
  I'm in 1.:interruptcheck.loopcount LOOP
  If WIN_API_UTILITY. InterruptCheck (hButton) then
  "exit";
  end if;
  : interruptcheck.counter: = i;
  synchronize;
  end loop;
  set_item_property('INTERRUPTCHECK.) PB_OFF', ENABLED, PROPERTY_FALSE);
  set_item_property('INTERRUPTCHECK.) PB', ENABLED, PROPERTY_TRUE);
  
  set_application_property (CURSOR_STYLE, 'DEFAULT');
  end;
  
  Published by: wael amar on May 1st, 2010 23:03

  OK, here's a unit test to work.

  The idea is taken from an article in oracle magazine (I don't have at hand, she, so I tried to restore it and "memory".) I remember the original was German doag-magazine and was written by Gerd Volberg).

  How to make the loop:

  PROCEDURE PR_DO_THE_LOOP IS
    nNumberInOneStep NUMBER:=2;
    tm               TIMER;
  BEGIN
       DEFAULT_VALUE(0, 'GLOBAL.INDEX');
    IF :GLOBAL.INDEX=0 THEN
         -- Didn't run yet, determine the max count
         :GLOBAL.MAX:=10000;
    END IF;
    LOOP
         -- Do the looping stuff
  
         -- Decrease counter
         nNumberInOneStep:=nNumberInOneStep-1;
         -- Increase globale counter
         :GLOBAL.INDEX:=:GLOBAL.INDEX+1;
         -- Exit conditions
         EXIT WHEN nNumberInOneStep=0;
         EXIT WHEN TO_NUMBER(:GLOBAL.INDEX)>=TO_NUMBER(:GLOBAL.MAX);
    END LOOP;
  
    -- reset index at end
    IF TO_NUMBER(:GLOBAL.INDEX)>=TO_NUMBER(:GLOBAL.MAX) THEN
         :GLOBAL.INDEX:=0;
    ELSE
         -- start timer for next iteration
         tm:=CREATE_TIMER('TM', 10, NO_REPEAT);
    END IF;
  END;
  

  The WHEN-TIMER-EXPIRED-trigger

  IF :GLOBAL.INTERRUPTED='Y' THEN
       MESSAGE('Interrupted at index ' || :GLOBAL.INDEX);
  ELSE
       PR_DO_THE_LOOP;
  END IF;
  

  The WHEN-button-PRESS-trigger the button stop

  :GLOBAL.INTERRUPTED:='Y';
  

  The WHEN-button-PRESS-trigger on 'start' - button

  :GLOBAL.INTERRUPTED:='N';
  PR_DO_THE_LOOP;
  

• Stop the loop

  Hi, I created a flash file and the swf file that I placed in dreamweaver, but the guard proofreading stage. I want her to play that once how disable the loop?
  Thank you

  Put a stop(); in the last frame of the timeline of the flash animation.

• Iteration of the loop only to store data

  Hello

  wouldn't be a good practice to use a while loop with:

  • his terminal State forced true,
  • Register shift not initialized

  The idea is to store information useful to a VI only and avoid the addition of a registry to offset for the moment inside the main vi.

  I have attached two screws as example.

  Thank you

  What you try to do this is already years back and it has become a common practice. Check on the driving force of

• I can't stop the Blob brush, create new layers, or painting on layers other than the one intended?

  I'm having trouble with the tool BLOB brush. I applied to a layer clipping mask, and I'm pain inside. If I paint touching the object in the layer it works fine, but if it doesn't touch or touches a layer above the I targeted that has the same color, then paint on a new layer, or on the top layer. Is it possible to disable this option? It's frustrating the dick out of me.

  Basically, it's how the blob Brush tool is supposed to work.

  What you could do:

  -isolate an object or a group existing, then paint.

  -block the other layers that you don't want painted.

• Stop the loop of movieclip

  Hello

  I am doing a map in flash, and when you transfer a name of a company (button) the construction of this company light up.

  Which works very well. The card is a MovieClip. I did this movieclip keyframes (pages).

  In the first keyframe, I entered stop();

  That worked well, but not for long. I wanted to put a few button with URL links in diffirent Keyframes (pages).

  When I typed the code so that it worked fine on the first keyframe. When I came to the second keyframe and make another button with link.

  When I tested the continuous MovieClip to play again and again and does not listen to stop(); more.

  How can this occur and why?

  Can someone help me?

  Sorry for the bad English.

  Joep

  Do you get any error messages?  What is the code you use on the different frameworks? Your keyframes are separated by empty frames?